- 26 11月, 2009 4 次提交
-
-
由 Hidetoshi Seto 提交于
Now all task_{u,s}time() pairs are replaced by task_times(). And task_gtime() is too simple to be an inline function. Cleanup them all. Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Spencer Candland <spencer@bluehost.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> LKML-Reference: <4B0E16D1.70902@jp.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Hidetoshi Seto 提交于
Functions task_{u,s}time() are called in pair in almost all cases. However task_stime() is implemented to call task_utime() from its inside, so such paired calls run task_utime() twice. It means we do heavy divisions (div_u64 + do_div) twice to get utime and stime which can be obtained at same time by one set of divisions. This patch introduces a function task_times(*tsk, *utime, *stime) to retrieve utime and stime at once in better, optimized way. Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Spencer Candland <spencer@bluehost.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> LKML-Reference: <4B0E16AE.906@jp.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Merge reason: Pick up fixes that did not make it into .32.0 Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mike Travis 提交于
Remove the verbose scheduler debug messages unless kernel parameter "sched_debug" set. /proc/sched_debug unchanged. Signed-off-by: NMike Travis <travis@sgi.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Tejun Heo <tj@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091118002221.489305000@alcatraz.americas.sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 25 11月, 2009 1 次提交
-
-
由 Shmulik Ladkani 提交于
In commit v2.6.21-691-g39bc89fd ("make SysRq-T show all tasks again") the interface of show_state_filter() was changed: zero valued 'state_filter' specifies "dump all tasks" (instead of -1). However, the condition for calling debug_show_all_locks() ("show locks if all tasks are dumped") was not updated accordingly. Signed-off-by: NShmulik Ladkani <shmulik.ladkani@gmail.com> Cc: peterz@infradead.org LKML-Reference: <4b0d2fe4.0ab6660a.6437.3cfc@mx.google.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 24 11月, 2009 4 次提交
-
-
由 Tim Blechmann 提交于
Branch hint profiling on my nehalem machine showed 96% incorrect branch hints: 6548732 174664120 96 __switch_to process_64.c 406 6548745 174565593 96 __switch_to process_64.c 410 Signed-off-by: NTim Blechmann <tim@klingt.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4B0BBB93.3080307@klingt.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tim Blechmann 提交于
Branch hint profiling on my nehalem machine showed over 90% incorrect branch hints: 10420275 170645395 94 context_switch sched.c 3043 10408421 171098521 94 context_switch sched.c 3050 Signed-off-by: NTim Blechmann <tim@klingt.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4B0BBB9F.6080304@klingt.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tim Blechmann 提交于
Branch hint profiling on my nehalem machine showed 90% incorrect branch hints: 15728471 158903754 90 pick_next_task_fair sched_fair.c 1555 Signed-off-by: NTim Blechmann <tim@klingt.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4B0BBBB1.2050100@klingt.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Blunck 提交于
sched_feat_write() should update ppos instead of file->f_pos. (This reduces some BKL dependencies of this code.) Signed-off-by: NJan Blunck <jblunck@suse.de> Cc: jkacur@redhat.com Cc: Arnd Bergmann <arnd@arndb.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jamie Lokier <jamie@shareable.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> LKML-Reference: <1258735245-25826-8-git-send-email-jblunck@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 16 11月, 2009 1 次提交
-
-
由 Peter Zijlstra 提交于
Heiko reported a case where a timer interrupt managed to reference a root_domain structure that was already freed by a concurrent hot-un-plug operation. Solve this like the regular sched_domain stuff is also synchronized, by adding a synchronize_sched() stmt to the free path, this ensures that a root_domain stays present for any atomic section that could have observed it. Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Cc: Gregory Haskins <ghaskins@novell.com> Cc: Siddha Suresh B <suresh.b.siddha@intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> LKML-Reference: <1258363873.26714.83.camel@laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 15 11月, 2009 1 次提交
-
-
由 Tejun Heo 提交于
In finish_task_switch(), fire_sched_in_preempt_notifiers() is called after finish_lock_switch(). However, depending on architecture, preemption can be enabled after finish_lock_switch() which breaks the semantics of preempt notifiers. So move it before finish_arch_switch(). This also makes the in- notifiers symmetric to out- notifiers in terms of locking - now both are called under rq lock. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NAvi Kivity <avi@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4AFD2801.7020900@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 13 11月, 2009 2 次提交
-
-
由 Peter Zijlstra 提交于
Instead of only considering SD_WAKE_AFFINE | SD_PREFER_SIBLING domains also allow all SD_PREFER_SIBLING domains below a SD_WAKE_AFFINE domain to change the affinity target. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <20091112145610.909723612@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Clean up the new affine to idle sibling bits while trying to grok them. Should not have any function differences. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <20091112145610.832503781@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 12 11月, 2009 27 次提交
-
-
由 Hidetoshi Seto 提交于
Originally task_s/utime() were designed to return clock_t but later changed to return cputime_t by following commit: commit efe567fc Author: Christian Borntraeger <borntraeger@de.ibm.com> Date: Thu Aug 23 15:18:02 2007 +0200 It only changed the type of return value, but not the implementation. As the result the granularity of task_s/utime() is still that of clock_t, not that of cputime_t. So using task_s/utime() in __exit_signal() makes values accumulated to the signal struct to be rounded and coarse grained. This patch removes casts to clock_t in task_u/stime(), to keep granularity of cputime_t over the calculation. v2: Use div_u64() to avoid error "undefined reference to `__udivdi3`" on some 32bit systems. Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: xiyou.wangcong@gmail.com Cc: Spencer Candland <spencer@bluehost.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> LKML-Reference: <4AFB9029.9000208@jp.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mike Galbraith 提交于
kthread_bind(), migrate_task() and sched_fork were missing updates, and try_to_wake_up() was updating after having already used the stale clock. Aside from preventing potential latency hits, there' a side benefit in that early boot printk time stamps become monotonic. Signed-off-by: NMike Galbraith <efault@gmx.de> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1258020464.6491.2.camel@marge.simson.net> Signed-off-by: NIngo Molnar <mingo@elte.hu> LKML-Reference: <new-submission>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: fix panic when trying to destroy a newly allocated Btrfs: allow more metadata chunk preallocation Btrfs: fallback on uncompressed io if compressed io fails Btrfs: find ideal block group for caching Btrfs: avoid null deref in unpin_extent_cache() Btrfs: skip btrfs_release_path in btrfs_update_root and btrfs_del_root Btrfs: fix some metadata enospc issues Btrfs: fix how we set max_size for free space clusters Btrfs: cleanup transaction starting and fix journal_info usage Btrfs: fix data allocation hint start
-
由 Linus Torvalds 提交于
Rafael debugged a resume-time hang (with oopses in workqueue handling) on his laptop that was due to the 'waker' workqueue entry being disconnected and then released without the workqueue entry having been synchronized. Several people were involved, with Oleg Nesterov doing a debugging patch showing what workqueue entry was corrupt etc. This was a regression introduced by commit 7bee549e ("Bluetooth: Add USB autosuspend support to btusb driver") as Rafael points out (not actually bisected, but it became clear once the bug was found). Tested-and-reported-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NOliver Neukum <oliver@neukum.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Josef Bacik 提交于
There is a problem where iget5_locked will look for an inode, not find it, and then subsequently try to allocate it. Another CPU will have raced in and allocated the inode instead, so when iget5_locked gets the inode spin lock again and does a search, it finds the new inode. So it goes ahead and calls destroy_inode on the inode it just allocated. The problem is we don't set BTRFS_I(inode)->root until the new inode is completely initialized. This patch makes us set root to NULL when alloc'ing a new inode, so when we get to btrfs_destroy_inode and we see that root is NULL we can just free up the memory and continue on. This fixes the panic http://www.kerneloops.org/submitresult.php?number=812690 Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: JBD/JBD2: free j_wbuf if journal init fails. ext3: Wait for proper transaction commit on fsync ext3: retry failed direct IO allocations
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - possible read past array alc88[02]_parse_auto_config() sound: rawmidi: fix MIDI device O_APPEND error handling sound: rawmidi: fix checking of O_APPEND when opening MIDI device sound: rawmidi: fix double init when opening MIDI device with O_APPEND ALSA: hda - Avoid quirk for HP dc5750 ALSA: hda - Tweak OLPC XO-1.5 microphone bias ALSA: hda: Use model=auto quirk for Sony VAIO VGN-FW170J using ALC262
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86/PCI: Adjust GFP mask handling for coherent allocations PCI ASPM: fix oops on root port removal
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: pasemi_defconfig update powerpc: 2.6.32 update of defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx powerpc/8xxx: enable IPsec ESP by default on mpc83xx/mpc85xx powerpc/83xx: Fix u-boot partion size for MPC8377E-WLAN boards powerpc/85xx: Fix USB GPIOs for MPC8569E-MDS boards powerpc/82xx: kmalloc failure ignored in ep8248e_mdio_probe() powerpc/85xx: sbc8548 - fixup of PCI-e related DTS fields
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: Use a definition for the userspace cmpxchg emulation syscall [ARM] Fix test for unimplemented ARM syscalls ARM: 5784/1: fix early boot machine ID mismatch error display [ARM] orion5x: update defconfig [ARM] Kirkwood: update defconfig [ARM] Kirkwood: clarify PCIe MEM bus/physical address distinction [ARM] kirkwood: fix PCI I/O port assignment [ARM] kirkwood: fix section mismatch [ARM] OpenRD base: Initialize PCI express and i2c [ARM] properly report mv78100 stepping A1 ARM: 5780/1: KS8695: Fix macro definition bug in regs-switch.c ARM: 5779/1: ep93xx/micro9.c: fix implicit declaration of function __raw_readl and IOMEM RealView: Add sparsemem support for the RealView PBX platform RealView: Remove duplicated #define REALVIEW_SYS_FLAGS* statements RealView: Add default memory configuration Check whether the SCU was already initialised ARMv7: Check whether the SMP/nAMP mode was already enabled [ARM] pxa: fix resume failure by saving/restoring IPRx registers [ARM] pxa/palm: fix incorrect initialization of Palm Tungsten C keyboard [ARM] pxa/zaurus: fix NAND flash OOB layout for Borzoi
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (52 commits) drm/kms: Init the CRTC info fields for modes forced from the command line. drm/radeon/r600: CS parser updates drm/radeon/kms: add debugfs for power management for AtomBIOS devices drm/radeon/kms: initial mode validation support drm/radeon/kms/atom/dce3: call transmitter init on mode set drm/radeon/kms: store detailed connector info drm/radeon/kms/atom/dce3: fix up usPixelClock calculation for Transmitter tables drm/radeon/kms/r600: fix rs880 support v2 drm/radeon/kms/r700: fix some typos in chip init drm/radeon/kms: remove some misleading debugging output drm/radeon/kms: stop putting VRAM at 0 in MC space on r600s. drm/radeon/kms: disable D1VGA and D2VGA if enabled drm/radeon/kms: Don't RMW CP_RB_CNTL drm/radeon/kms: fix coherency issues on AGP cards. drm/radeon/kms: fix rc410 suspend/resume. drm/radeon/kms: add quirk for hp dc5750 drm/radeon/kms/atom: fix potential oops in spread spectrum code drm/kms: typo fix drm/radeon/kms/atom: Make card_info per device drm/radeon/kms/atom: Fix DVO support ...
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: highmem: Fix debug_kmap_atomic() to also handle KM_IRQ_PTE, KM_NMI, and KM_NMI_PTE highmem: Fix race in debug_kmap_atomic() which could cause warn_count to underflow rcu: Fix long-grace-period race between forcing and initialization uids: Prevent tear down race
-
由 Linus Torvalds 提交于
Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: try_one_irq() must be called with irq disabled
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Fix permission checks perf_events: Fix some typo in the perf events config description
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Use root_task_group_empty only with FAIR_GROUP_SCHED sched: Fix kernel-doc function parameter name
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, amd-ucode: Check UCODE_MAGIC before loading the container file x86: Fix error return sequence in __ioremap_caller() x86: Add Phoenix/MSC BIOSes to lowmem corruption list
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: partial revert to fix double brelse WARNING() ext4: Fix return value of ext4_split_unwritten_extents() to fix direct I/O ext4: code clean up for dio fallocate handling ext4: skip conversion of uninit extents after direct IO if there isn't any ext4: fix ext4_ext_direct_IO()'s return value after converting uninit extents ext4: discard preallocation when restarting a transaction during truncate
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] SBC-FITPC2 watchdog driver registration fix
-
git://git.fluff.org/bjdooks/linux由 Linus Torvalds 提交于
* 'fixes-s3c-2632-rc6' of git://git.fluff.org/bjdooks/linux: ARM: S3C64XX: DMA: Free node for non-circular queues ARM: S3C64XX: DMA: Callback with correct buffer pointer ARM: S3C64XX: DMA: Make src and dst transfer size same ARM: S3C64XX: DMA: Unify callback functions for success/failure ARM: S3C64XX: DMA: Protect buffer pointers while manipulation ARM: S3C64XX: Tidy definition and comments in s3c_dma_has_circular() ARM: S3C64XX: Remove duplicate s3c_dma_has_circular() definition for S3C64xx. ARM: SMDK6410: Allocate more GPIO space for WM1190-EV1 ARM: SMDK6410: Configure GPIO pull up for WM835x IRQ line
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (27 commits) V4L/DVB (13314): saa7134: set ts_force_val for the Hauppauge WinTV HVR-1150 V4L/DVB (13313): saa7134: add support for FORCE_TS_VALID mode for mpeg ts input V4L/DVB (13311): uvcvideo: Fix compilation warning with 2.6.32 due to type mismatch with abs() V4L/DVB (13309): uvcvideo: Ignore the FIX_BANDWIDTH for compressed video V4L/DVB (13287): ce6230 - saa7164-cmd: Fix wrong sizeof V4L/DVB (13286): pxa-camera: Fix missing sched.h V4L/DVB (13264): gspca_mr97310a: Change vstart for CIF sensor type 1 cams V4L/DVB (13257): gspca - m5602-s5k4aa: Add vflip for Fujitsu Amilo Xi 2528 V4L/DVB (13256): gspca - m5602-s5k4aa: Add another MSI GX700 vflip quirk V4L/DVB (13255): gspca - m5602-s5k4aa: Add vflip quirk for the Bruneinit laptop V4L/DVB (13240): firedtv: fix regression: tuning fails due to bogus error return V4L/DVB (13237): firedtv: length field corrupt in ca2host if length>127 V4L/DVB (13230): s2255drv: Don't conditionalize video buffer completion on waiting processes V4L/DVB (13202): smsusb: add autodetection support for three additional Hauppauge USB IDs V4L/DVB (13190): em28xx: fix panic that can occur when starting audio streaming V4L/DVB (13170): bttv: Fix reversed polarity error when switching video standard V4L/DVB (13169): bttv: Fix potential out-of-order field processing V4L/DVB (13167): pt1: Fix a compile error on arm V4L/DVB (13132): fix use-after-free Oops, resulting from a driver-core API change V4L/DVB (13131): pxa_camera: fix camera pixel format configuration ...
-
由 Chris Mason 提交于
On an FS where all of the space has not been allocated into chunks yet, the enospc can return enospc just because the existing metadata chunks are full. We get around this by allowing more metadata chunks to be allocated up to a certain limit, and finding the right limit is a little fuzzy. The problem is the reservations for delalloc would preallocate way too much of the FS as metadata. We need to start saying no and just force some IO to happen. But we also need to let a reasonable amount of the FS become metadata. This bumps the hard limit up, later releases will have a better system. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
Currently compressed IO does not deal with not having its entire extent able to be allocated. So if we have enough free space to allocate for the extent, but its not contiguous, it will fail spectacularly. This patch fixes this by falling back on uncompressed IO which lets us spread the delalloc extent across multiple extents. I tested this by making us randomly think the reservation had failed to make it fallback on the uncompressed io way and it seemed to work fine. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
This patch changes a few things. Hopefully the comments are helpfull, but I'll try and be as verbose here. Problem: My fedora box was taking 1 minute and 21 seconds to boot with btrfs as root. Part of this problem was we pick the first block group we can find and start caching it, even if it may not have enough free space. The other problem is we only search for cached block groups the first time around, which we won't find any cached block groups because this is a newly mounted fs, so we end up caching several block groups during bootup, which with alot of fragmentation takes around 30-45 seconds to complete, which bogs down the system. So Solution: 1) Don't cache block groups willy-nilly at first. Instead try and figure out which block group has the most free, and therefore will take the least amount of time to cache. 2) Don't be so picky about cached block groups. The other problem is once we've filled up a cluster, if the block group isn't finished caching the next time we try and do the allocation we'll completely ignore the cluster and start searching from the beginning of the space, which makes us cache more block groups, which slows us down even more. So instead of skipping block groups that are not finished caching when we have a hint, only skip the block group if it hasn't started caching yet. There is one other tweak in here. Before if we allocated a chunk and still couldn't find new space, we'd end up switching the space info to force another chunk allocation. This could make us end up with way too many chunks, so keep track of this particular case. With this patch and my previous cluster fixes my fedora box now boots in 43 seconds, and according to the bootchart is not held up by our block group caching at all. Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Dan Carpenter 提交于
I re-orderred the checks to avoid dereferencing "em" if it was null. Found by smatch static checker. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Li Dongyang 提交于
We don't need to call btrfs_release_path because btrfs_free_path will do that for us. Signed-off-by: NLi Dongyang <Jerry87905@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
We weren't reserving metadata space for rename, rmdir and unlink, which could cause problems. Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
This patch fixes a problem where max_size can be set to 0 even though we filled the cluster properly. We set max_size to 0 if we restart the cluster window, but if the new start entry is big enough to be our new cluster then we could return with a max_size set to 0, which will mean the next time we try to allocate from this cluster it will fail. So set max_extent to the entry's size. Tested this on my box and now we actually allocate from the cluster after we fill it. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-