Chapter 14 of Documentation/CodingStyle says:

The preferred form for passing a size of a struct is the following:

	p = kmalloc(sizeof(*p), ...);

The alternative form where struct name is spelled out hurts
readability and introduces an opportunity for a bug when the pointer
variable type is changed but the corresponding sizeof that is passed
to a memory allocator is not.

This wasn't followed consistently in drivers/cpufreq, let's make it
more consistent by always following this rule.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

They are called policy, cur_policy, new_policy, data, etc.  Just call
them policy wherever possible.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This patch addresses the following issues in the header files in the
cpufreq core:
 - Include headers in ascending order, so that we don't add same
   many times by mistake.
 - <asm/> must be included after <linux/>, so that they override
   whatever they need to.
 - Remove unnecessary includes.
 - Don't include files already included by cpufreq.h or
   cpufreq_governor.h.

[rjw: Changelog]
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The caller of cpufreq_add_policy_cpu() already has a pointer to the
policy structure and there is no need to look it up again in
cpufreq_add_policy_cpu().  Let's pass it directly.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The only case triggering a jump to the err_out_unregister label in
__cpufreq_add_dev() is when cpufreq_add_dev_interface() fails.
However, if cpufreq_add_dev_interface() fails, it calls kobject_put()
for the policy kobject in its error code path and since that causes
the kobject's refcount to become 0, the additional kobject_put() for
the same kobject under err_out_unregister and the
wait_for_completion() following it are pointless, so drop them.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>

The cpufreq core is a little inconsistent in the way it uses the
driver module refcount.

Namely, if __cpufreq_add_dev() is called for a CPU that doesn't
share the policy object with any other CPUs, the driver module
refcount it grabs to start with will be dropped by it before
returning and will be equal to whatever it had been before that
function was invoked.

However, if the given CPU does share the policy object with other
CPUs, either cpufreq_add_policy_cpu() is called to link the new CPU
to the existing policy, or cpufreq_add_dev_symlink() is used to link
the other CPUs sharing the policy with it to the just created policy
object.  In that case, because both cpufreq_add_policy_cpu() and
cpufreq_add_dev_symlink() call cpufreq_cpu_get() for the given
policy (the latter possibly many times) without the balancing
cpufreq_cpu_put() (unless there is an error), the driver module
refcount will be left by __cpufreq_add_dev() with a nonzero value
(different from the initial one).

To remove that inconsistency make cpufreq_add_policy_cpu() execute
cpufreq_cpu_put() for the given policy before returning, which
decrements the driver module refcount so that it will be equal to its
initial value after __cpufreq_add_dev() returns.  Also remove the
cpufreq_cpu_get() call from cpufreq_add_dev_symlink(), since both the
policy refcount and the driver module refcount are nonzero when it is
called and they don't need to be bumped up by it.

Accordingly, drop the cpufreq_cpu_put() from __cpufreq_remove_dev(),
since it is only necessary to balance the cpufreq_cpu_get() called
by cpufreq_add_policy_cpu() or cpufreq_add_dev_symlink().
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>

Pointer to struct cpufreq_policy is already passed to these routines
and we don't need to send policy->cpu to them as well.  So, get rid
of this extra argument and use policy->cpu everywhere.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

We call cpufreq_cpu_get() in cpufreq_add_dev_symlink() to increase usage
refcount of policy, but not to get a policy for the given CPU.  So, we
don't really need to capture the return value of this routine.  We can
simply use policy passed as an argument to cpufreq_add_dev_symlink().

Moreover debug print is rewritten to make it more clear.

[rjw: Changelog]
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Now that we have the infrastructure to perform a light-weight init/tear-down,
use that in the cpufreq CPU hotplug notifier when invoked from the
suspend/resume path.

This also ensures that the file permissions of the cpufreq sysfs files are
preserved across suspend/resume, something which commit a66b2e (cpufreq:
Preserve sysfs files across suspend/resume) originally intended to do, but
had to be reverted due to other problems.
Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

To perform light-weight cpu-init and teardown in the cpufreq subsystem
during suspend/resume, we need to separate out the 2 main functionalities
of the cpufreq CPU hotplug callbacks, as outlined below:

1. Init/tear-down of core cpufreq and CPU-specific components, which are
   critical to the correct functioning of the cpufreq subsystem.

2. Init/tear-down of cpufreq sysfs files during suspend/resume.

The first part requires accurate updates to the policy structure such as
its ->cpus and ->related_cpus masks, whereas the second part requires that
the policy->kobj structure is not released or re-initialized during
suspend/resume.

To handle both these requirements, we need to allow updates to the policy
structure throughout suspend/resume, but prevent the structure from getting
freed up. Also, we must have a mechanism by which the cpu-up callbacks can
restore the policy structure, without allocating things afresh. (That also
helps avoid memory leaks).

To achieve this, we use 2 schemes:
a. Use a fallback per-cpu storage area for preserving the policy structures
   during suspend, so that they can be restored during resume appropriately.

b. Use the 'frozen' flag to determine when to free or allocate the policy
   structure vs when to restore the policy from the saved fallback storage.
   Thus we can successfully preserve the structure across suspend/resume.

Effectively, this helps us complete the separation of the 'light-weight'
and the 'full' init/tear-down sequences in the cpufreq subsystem, so that
this can be made use of in the suspend/resume scenario.
Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

During suspend/resume we would like to do a light-weight init/teardown of
CPUs in the cpufreq subsystem and preserve certain things such as sysfs files
etc across suspend/resume transitions. Add a flag called 'frozen' to help
distinguish the full init/teardown sequence from the light-weight one.
Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

During cpu offline, when the policy->cpu is going down, some other CPU
present in the policy->cpus mask is nominated as the new policy->cpu.
Extract this functionality from __cpufreq_remove_dev() and implement
it in a helper function. This helps in upcoming code reorganization.
Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

cpufreq_add_dev_interface() includes the work of exposing the interface
to the device, as well as a lot of unrelated stuff. Move the latter to
cpufreq_add_dev(), where it is more appropriate.
Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Separate out the allocation of the cpufreq policy structure (along with
its error handling) to a helper function. This makes the code easier to
read and also helps with some upcoming code reorganization.
Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The call to cpufreq_update_policy() is placed in the CPU hotplug callback
of cpufreq_stats, which has a higher priority than the CPU hotplug callback
of cpufreq-core. As a result, during CPU_ONLINE/CPU_ONLINE_FROZEN, we end up
calling cpufreq_update_policy() *before* calling cpufreq_add_dev() !
And for uninitialized CPUs, it just returns silently, not doing anything.

To add to that, cpufreq_stats is not even the right place to call
cpufreq_update_policy() to begin with. The cpufreq core ought to handle
this in its own callback, from an elegance/relevance perspective.

So move the invocation of cpufreq_update_policy() to cpufreq_cpu_callback,
and place it *after* cpufreq_add_dev().
Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Forgot to use the appropriate math64 function.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@gmail.com>

Flash update routine was improperly checking register read API return value.
Modify register read API and perform proper error check.
Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Set link speed and duplex to unknown when link is not up.
Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Do not obtain link speed from register when adapter
  link is down.
Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Driver was not handling external loopback diagnostic
test request.
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPratik Pujar <pratik.pujar@qlogic.com>
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Delete MAC address from the adapter's filter table
  if the source MAC address of ingress packet matches.
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Driver was passing the address of a pointer instead of
the pointer itself.
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IRQF_DISABLED is a no-op by now and should be removed.
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without this patch, the values for ideality (register 0x4b) and ideality
selection mask (register 0x4c) are inverted.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: stable@vger.kernel.org # 3.9+
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

[  198.720048] ------------[ cut here ]------------
[  198.720108] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:255 dev_watchdog+0x229/0x240()
[  198.720118] NETDEV WATCHDOG: eth0 (sis900): transmit queue 0 timed out
[  198.720125] Modules linked in: bridge stp llc dmfe sundance 3c59x sis900 mii
[  198.720159] CPU: 0 PID: 0 Comm: swapper Not tainted 3.11.0-rc3+ #12
[  198.720167] Hardware name: System Manufacturer System Name/TUSI-M, BIOS ASUS TUSI-M ACPI BIOS
Revision 1013 Beta 001 12/14/2001
[  198.720175]  000000ff c13fa6b9 c169ddcc c12208d6 c169ddf8 c1031e4d c1664a84 c169de24
[  198.720197]  00000000 c165f5ea 000000ff c13fa6b9 00000001 000000ff c1664a84 c169de10
[  198.720217]  c1031f13 00000009 c169de08 c1664a84 c169de24 c169de50 c13fa6b9 c165f5ea
[  198.720240] Call Trace:
[  198.720257]  [<c13fa6b9>] ? dev_watchdog+0x229/0x240
[  198.720274]  [<c12208d6>] dump_stack+0x16/0x20
[  198.720306]  [<c1031e4d>] warn_slowpath_common+0x7d/0xa0
[  198.720318]  [<c13fa6b9>] ? dev_watchdog+0x229/0x240
[  198.720330]  [<c1031f13>] warn_slowpath_fmt+0x33/0x40
[  198.720342]  [<c13fa6b9>] dev_watchdog+0x229/0x240
[  198.720357]  [<c103f158>] call_timer_fn+0x78/0x150
[  198.720369]  [<c103f0e0>] ? internal_add_timer+0x40/0x40
[  198.720381]  [<c13fa490>] ? dev_init_scheduler+0xa0/0xa0
[  198.720392]  [<c103f33f>] run_timer_softirq+0x10f/0x200
[  198.720412]  [<c103954f>] ? __do_softirq+0x6f/0x210
[  198.720424]  [<c13fa490>] ? dev_init_scheduler+0xa0/0xa0
[  198.720435]  [<c1039598>] __do_softirq+0xb8/0x210
[  198.720467]  [<c14b54d2>] ? _raw_spin_unlock+0x22/0x30
[  198.720484]  [<c1003245>] ? handle_irq+0x25/0xd0
[  198.720496]  [<c1039c0c>] irq_exit+0x9c/0xb0
[  198.720508]  [<c14bc9d7>] do_IRQ+0x47/0x94
[  198.720534]  [<c1056078>] ? hrtimer_start+0x28/0x30
[  198.720564]  [<c14bc8b1>] common_interrupt+0x31/0x38
[  198.720589]  [<c1008692>] ? default_idle+0x22/0xa0
[  198.720600]  [<c10083c7>] arch_cpu_idle+0x17/0x30
[  198.720631]  [<c106d23d>] cpu_startup_entry+0xcd/0x180
[  198.720643]  [<c14ae30a>] rest_init+0xaa/0xb0
[  198.720654]  [<c14ae260>] ? reciprocal_value+0x50/0x50
[  198.720668]  [<c17044e0>] ? repair_env_string+0x60/0x60
[  198.720679]  [<c1704bda>] start_kernel+0x29a/0x350
[  198.720690]  [<c17044e0>] ? repair_env_string+0x60/0x60
[  198.720721]  [<c1704269>] i386_start_kernel+0x39/0xa0
[  198.720729] ---[ end trace 81e0a6266f5c73a8 ]---
[  198.720740] eth0: Transmit timeout, status 00000204 00000000

timer routine checks the link status and if it's up calls
netif_carrier_on() allowing upper layer to start the tx queue
even if the auto-negotiation process is not finished.

Also remove ugly auto-negotiation check from the sis900_start_xmit()

CC: Duan Fugang <B38611@freescale.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDenis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This message was added in commit a7154cb8 (June 2004, [PATCH] r8169:
link handling and phy reset rework) and is printed every ten seconds
when no cable is connected and runtime power management is disabled.
(Before that commit, "Reset RTL8169s PHY" would be printed instead.)
Signed-off-by: NPeter Wu <lekensteyn@gmail.com>
Acked-by: NFrancois Romieu <romieu@fr.zoreil.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IRQF_DISABLED is a no-op by now and should be
removed.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's quite unlikely that dev_set_promiscuity will fail,
but worth checking just in case.

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

macvlan passthrough mode is special: it's not possible to switch to or
from it through a netlink command.

But if you try, the command will succeed, which is
confusing.

Validate input and return error to user.

Cc:  Sridhar Samudrala <sri@us.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eliezer renames several *ll_poll to *busy_poll, but forgets
CONFIG_NET_LL_RX_POLL, so in case of confusion, rename it too.

Cc: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Slaves get the 64B CQE/EQE state from QUERY_HCA, not from the module parameter.

If the parameter is set to zero, the slave outputs an incorrect/irrelevant
warning message that 64B CQEs/EQEs are supported but not enabled (even if the
hypervisor has enabled 64B CQEs/EQEs).
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the user has not assigned a MAC address to a VM, then don't give it MAC which
is based on the PF one. The current derivation scheme is wrong and leads to VM
MAC collisions when the number of cards/hypervisors becomes big enough.

Instead, just give it zeros and let them figure out what to do with that.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Marvell PCIe driver uses an emulated PCI-to-PCI bridge to be able
to dynamically set up MBus address decoding windows for PCI I/O and
memory regions depending on the PCI devices enumerated by Linux.

However, this emulated PCI-to-PCI bridge logic makes the Linux PCI
core believe that prefetchable memory regions are supported (because
the registers are read/write), while in fact no adress decoding window
is ever created for such regions. Since the Marvell MBus address
decoding windows do not distinguish memory regions and prefetchable
memory regions, this patch takes a simple approach: change the
PCI-to-PCI bridge emulation to let the Linux PCI core know that we
don't support prefetchable memory regions.

To achieve this, we simply make the prefetchable memory base a
read-only register that always returns 0. Reading/writing all the
other prefetchable memory related registers has no effect.

This problem was originally reported by Finn Hoffmann
<finn@uni-bremen.de>, who couldn't get a RTL8111/8168B PCI NIC working
on the NSA310 Kirkwood platform after updating to 3.11-rc. The problem
was that the PCI-to-PCI bridge emulation was making the Linux PCI core
believe that we support prefetchable memory, so the Linux PCI core was
only filling the prefetchable memory base and limit registers, which
does not lead to a MBus window being created. The below patch has been
confirmed by Finn Hoffmann to fix his problem on Kirkwood, and has
otherwise been successfully tested on the Armada XP GP platform with a
e1000e PCIe NIC and a Marvell SATA PCIe card.
Reported-by: NFinn Hoffmann <finn@uni-bremen.de>
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

slots-fan on G5 Xserve is always running at full speed with windfarm_rm31
driver, resulting in a very high acoustic noise level. It seems the fan
parameters are incorrect, and have been copied from the Drive Bay fan
(RPM, not present on rm31) of the legacy therm_pm72 driver. This patch
changes the parameters to match the Slots fan (PWM) of therm_pm72. With
the patch, slots-fan speed drops from 99% to 19% during normal use,
and slots-temp settle to ~42'C.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
CC: <stable@vger.kernel.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Self explanitory dma_mapping_error addition to the 8139 driver, based on this:
https://bugzilla.redhat.com/show_bug.cgi?id=947250

It showed several backtraces arising for dma_map_* usage without checking the
return code on the mapping.  Add the check and abort the rx/tx operation if its
failed.  Untested as I have no hardware and the reporter has wandered off, but
seems pretty straightforward.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- fix the conversion between cpu and __le32
 - replace some pla_ocp and usb_ocp functions with generic_ocp function
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allocate the required memory before calling usb_control_msg. And
the additional memory copy is necessary.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace 0 with the result from usbnet_cdc_bind().
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>