- 26 11月, 2016 16 次提交
-
-
由 Nogah Frankel 提交于
Change trap setting function so instead of determining the trap group by trap id, it gets it as a parameter (so later we can have different trap groups for Spectrum and Switchx2). Add "is_ctrl" parameter to the trap setting function. It control whether the trapped packets wait in a designated control buffer or in their default one. This parameter is ignored by Switchx2 and Switchib. Add these parameters to the traps array in Spectrum, Switchx2 and Switchib. Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nogah Frankel 提交于
Change the event handling in Switchib to be comptible with Spectrum and Switchx2. Use the generic listener struct for the events. Init and fini them by loop (and not by calling each event by its name). Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nogah Frankel 提交于
Change the events to use the generic listener struct. Merge the event list into the trap list, so the same functions will handle both. Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nogah Frankel 提交于
Change the events to use the generic listener struct. Merge the event list into the trap list, so the same functions will handle both. Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nogah Frankel 提交于
Create a macro for creating the generic listener struct for events, similar to the one for rx traps. Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nogah Frankel 提交于
Reorganize the traps to use the new generic listener struct and functions. Use macros to shorten the traps list. Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nogah Frankel 提交于
Replace the old rx listener struct definitions by the generic ones. Use the new generic registering / unregistering functions for them. Add some macros to organize the trap list. Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nogah Frankel 提交于
In Spectrum, there is a macro to arrange the traps list. This macro is useful for everyone who is using rx traps. Create a similar macro in core.h for creating the generic listener struct for rx traps. Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nogah Frankel 提交于
We have 2 types of HW traps to handle, rx traps and events. The registration workflow for both is very similar. So it only make sense to create one function to handle both. This patch creates a struct to hold the data for both cases. It also creates a registration and an un-registration functions that get this generic struct as input. Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nogah Frankel 提交于
Since commit 99724c18 ("mlxsw: spectrum: Introduce support for router interfaces") we no longer rely on flooding traffic to the CPU in order to trap packets intended for the host itself. Therefore, the FDB MC trap can be removed. Remove traps for protocols that are not supported yet. Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We verified that MLX5_FLOW_CONTEXT_ACTION_COUNT was set on the first line of the function so we don't need to check again here. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sunil Goutham 提交于
Enable pause frames on both Rx and Tx side, configure pause interval e.t.c. Also support for enable/disable pause frames on Rx/Tx via ethtool has been added. Signed-off-by: NSunil Goutham <sgoutham@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sunil Goutham 提交于
This patch enables moving average calculation of Rx pkt's resources and configures RED and backpressure levels for both CQ and RBDR. Also initialize SQ's CQ_LIMIT properly. Signed-off-by: NSunil Goutham <sgoutham@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thanneeru Srinivasulu 提交于
Signed-off-by: NThanneeru Srinivasulu <tsrinivasulu@cavium.com> Signed-off-by: NSunil Goutham <sgoutham@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sunil Goutham 提交于
On 80xx only one lane of DLM0 and DLM1 (of BGX0) can be used , so even though lmac count may be 2 but LMAC1 should use serdes lane of DLM1. Since it's not possible to distinguish 80xx from 81xx as PCI devid are same, this patch adds this config support by replying on what firmware configures the lmacs with. Signed-off-by: NSunil Goutham <sgoutham@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Currently if txq_info->uldtxq cannot be allocated then txq_info->txq is being kfree'd (which is redundant because it is NULL) instead of txq_info. Fix this by instead kfree'ing txq_info. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 11月, 2016 7 次提交
-
-
由 Eric Dumazet 提交于
Goal is to reorganize this critical structure to increase performance. ndo_start_xmit() should only dirty one cache line, and access as few cache lines as possible. Add sp_ (Slow Path) prefix to fields that are not used in fast path, to make clear what is going on. After this patch pahole reports something much better, as all ndo_start_xmit() needed fields are packed into two cache lines instead of seven or eight struct mlx4_en_tx_ring { u32 last_nr_txbb; /* 0 0x4 */ u32 cons; /* 0x4 0x4 */ long unsigned int wake_queue; /* 0x8 0x8 */ struct netdev_queue * tx_queue; /* 0x10 0x8 */ u32 (*free_tx_desc)(struct mlx4_en_priv *, struct mlx4_en_tx_ring *, int, u8, u64, int); /* 0x18 0x8 */ struct mlx4_en_rx_ring * recycle_ring; /* 0x20 0x8 */ /* XXX 24 bytes hole, try to pack */ /* --- cacheline 1 boundary (64 bytes) --- */ u32 prod; /* 0x40 0x4 */ unsigned int tx_dropped; /* 0x44 0x4 */ long unsigned int bytes; /* 0x48 0x8 */ long unsigned int packets; /* 0x50 0x8 */ long unsigned int tx_csum; /* 0x58 0x8 */ long unsigned int tso_packets; /* 0x60 0x8 */ long unsigned int xmit_more; /* 0x68 0x8 */ struct mlx4_bf bf; /* 0x70 0x18 */ /* --- cacheline 2 boundary (128 bytes) was 8 bytes ago --- */ __be32 doorbell_qpn; /* 0x88 0x4 */ __be32 mr_key; /* 0x8c 0x4 */ u32 size; /* 0x90 0x4 */ u32 size_mask; /* 0x94 0x4 */ u32 full_size; /* 0x98 0x4 */ u32 buf_size; /* 0x9c 0x4 */ void * buf; /* 0xa0 0x8 */ struct mlx4_en_tx_info * tx_info; /* 0xa8 0x8 */ int qpn; /* 0xb0 0x4 */ u8 queue_index; /* 0xb4 0x1 */ bool bf_enabled; /* 0xb5 0x1 */ bool bf_alloced; /* 0xb6 0x1 */ u8 hwtstamp_tx_type; /* 0xb7 0x1 */ u8 * bounce_buf; /* 0xb8 0x8 */ /* --- cacheline 3 boundary (192 bytes) --- */ long unsigned int queue_stopped; /* 0xc0 0x8 */ struct mlx4_hwq_resources sp_wqres; /* 0xc8 0x58 */ /* --- cacheline 4 boundary (256 bytes) was 32 bytes ago --- */ struct mlx4_qp sp_qp; /* 0x120 0x30 */ /* --- cacheline 5 boundary (320 bytes) was 16 bytes ago --- */ struct mlx4_qp_context sp_context; /* 0x150 0xf8 */ /* --- cacheline 9 boundary (576 bytes) was 8 bytes ago --- */ cpumask_t sp_affinity_mask; /* 0x248 0x20 */ enum mlx4_qp_state sp_qp_state; /* 0x268 0x4 */ u16 sp_stride; /* 0x26c 0x2 */ u16 sp_cqn; /* 0x26e 0x2 */ /* size: 640, cachelines: 10, members: 36 */ /* sum members: 600, holes: 1, sum holes: 24 */ /* padding: 16 */ }; Instead of this silly placement : struct mlx4_en_tx_ring { u32 last_nr_txbb; /* 0 0x4 */ u32 cons; /* 0x4 0x4 */ long unsigned int wake_queue; /* 0x8 0x8 */ /* XXX 48 bytes hole, try to pack */ /* --- cacheline 1 boundary (64 bytes) --- */ u32 prod; /* 0x40 0x4 */ /* XXX 4 bytes hole, try to pack */ long unsigned int bytes; /* 0x48 0x8 */ long unsigned int packets; /* 0x50 0x8 */ long unsigned int tx_csum; /* 0x58 0x8 */ long unsigned int tso_packets; /* 0x60 0x8 */ long unsigned int xmit_more; /* 0x68 0x8 */ unsigned int tx_dropped; /* 0x70 0x4 */ /* XXX 4 bytes hole, try to pack */ struct mlx4_bf bf; /* 0x78 0x18 */ /* --- cacheline 2 boundary (128 bytes) was 16 bytes ago --- */ long unsigned int queue_stopped; /* 0x90 0x8 */ cpumask_t affinity_mask; /* 0x98 0x10 */ struct mlx4_qp qp; /* 0xa8 0x30 */ /* --- cacheline 3 boundary (192 bytes) was 24 bytes ago --- */ struct mlx4_hwq_resources wqres; /* 0xd8 0x58 */ /* --- cacheline 4 boundary (256 bytes) was 48 bytes ago --- */ u32 size; /* 0x130 0x4 */ u32 size_mask; /* 0x134 0x4 */ u16 stride; /* 0x138 0x2 */ /* XXX 2 bytes hole, try to pack */ u32 full_size; /* 0x13c 0x4 */ /* --- cacheline 5 boundary (320 bytes) --- */ u16 cqn; /* 0x140 0x2 */ /* XXX 2 bytes hole, try to pack */ u32 buf_size; /* 0x144 0x4 */ __be32 doorbell_qpn; /* 0x148 0x4 */ __be32 mr_key; /* 0x14c 0x4 */ void * buf; /* 0x150 0x8 */ struct mlx4_en_tx_info * tx_info; /* 0x158 0x8 */ struct mlx4_en_rx_ring * recycle_ring; /* 0x160 0x8 */ u32 (*free_tx_desc)(struct mlx4_en_priv *, struct mlx4_en_tx_ring *, int, u8, u64, int); /* 0x168 0x8 */ u8 * bounce_buf; /* 0x170 0x8 */ struct mlx4_qp_context context; /* 0x178 0xf8 */ /* --- cacheline 9 boundary (576 bytes) was 48 bytes ago --- */ int qpn; /* 0x270 0x4 */ enum mlx4_qp_state qp_state; /* 0x274 0x4 */ u8 queue_index; /* 0x278 0x1 */ bool bf_enabled; /* 0x279 0x1 */ bool bf_alloced; /* 0x27a 0x1 */ /* XXX 5 bytes hole, try to pack */ /* --- cacheline 10 boundary (640 bytes) --- */ struct netdev_queue * tx_queue; /* 0x280 0x8 */ int hwtstamp_tx_type; /* 0x288 0x4 */ /* size: 704, cachelines: 11, members: 36 */ /* sum members: 587, holes: 6, sum holes: 65 */ /* padding: 52 */ }; Signed-off-by: NEric Dumazet <edumazet@google.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roi Dayan 提交于
A flow should be offloaded only if the matches are allowed according to min inline mode. Signed-off-by: NRoi Dayan <roid@mellanox.com> Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roi Dayan 提交于
Implement devlink show and set of HW inline-mode. The supported modes: none, link, network, transport. We currently support one mode for all vports so set is done on all vports. When eswitch is first initialized the inline-mode is queried from the FW. Signed-off-by: NRoi Dayan <roid@mellanox.com> Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roi Dayan 提交于
Also move the inline capablities enum to a shared header vport.h Signed-off-by: NRoi Dayan <roid@mellanox.com> Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Reflect the administative link changes done on the VF representor to the VF e-switch vport. This means that doing ip link set down/up commands on the VF rep will modify the e-switch vport state which in turn will make proper VF drivers to set their carrier accordingly. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Switchdev driver net-device port statistics should follow the model introduced in commit a5ea31f5 'Merge branch net-offloaded-stats'. For VF reps we return the SRIOV eswitch vport stats as the usual ones and SW stats if asked. For the PF, if we're in the switchdev mode, we return the uplink stats and SW stats if asked, otherwise as before. The uplink stats are implemented using the PPCNT 802_3 counters which are already being read/cached by the driver. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Some drivers would need to check few internal matters for that. To be used in downstream mlx5 commit. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 11月, 2016 9 次提交
-
-
由 Arnd Bergmann 提交于
Both of these drivers won't work on 64-bit architectures unless they are redesigned, since they store a virtual address pointer in a 32-bit field of the descriptors: drivers/net/ethernet/marvell/mvneta_bm.c: In function 'mvneta_bm_construct': drivers/net/ethernet/marvell/mvneta_bm.c:103:16: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/net/ethernet/marvell/mvpp2.c: In function 'mvpp2_prs_vlan_init': drivers/net/ethernet/marvell/mvpp2.c:2563:32: error: large integer implicitly truncated to unsigned type [-Werror=overflow] This limits the COMPILE_TEST option for the two drivers again to only build them on 32-bit. This seems nicer than shutting up the warnings, in case we ever actually want to use them on 64-bit, as the warnings indicate which parts of the driver are currently broken there. Fixes: a0627f77 ("net: marvell: Allow drivers to be built with COMPILE_TEST") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Vecera 提交于
Implement thermal zone for mlxsw based HW. It uses temperature sensor provided by ASIC (the same as mlxsw hwmon interface) to report current temp to thermal core. The ASIC's PWM is then used to control speed of system fans registered as cooling devices. Signed-off-by: NIvan Vecera <cera@cera.cz> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
The MFSL register is used to configure the fan speed event / interrupt notification mechanism. Fan speed threshold are defined for both under-speed and over-speed. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Robinson 提交于
There's not much point, except compile test, enabling the stmmac platform drivers unless the STM32 SoC is enabled. It's not useful without it. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
While stressing a 40Gbit mlx4 NIC with busy polling, I found false sharing in mlx4 driver that can be easily avoided. This patch brings an additional 7 % performance improvement in UDP_RR workload. 1) If we received no frame during one mlx4_en_process_rx_cq() invocation, no need to call mlx4_cq_set_ci() and/or dirty ring->cons 2) Do not refill rx buffers if we have plenty of them. This avoids false sharing and allows some bulk/batch optimizations. Page allocator and its locks will thank us. Finally, mlx4_en_poll_rx_cq() should not return 0 if it determined cpu handling NIC IRQ should be changed. We should return budget-1 instead, to not fool net_rx_action() and its netdev_budget. v2: keep AVG_PERF_COUNTER(... polled) even if polled is 0 Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
barrier() is a big hammer compared to READ_ONCE(), and requires comments explaining what is protected. READ_ONCE() is more precise and compiler should generate better overall code. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
mlx5e_xdp_set() is currently the only place where we drop reference on the prog sitting in priv->xdp_prog when it's exchanged by a new one. We also need to make sure that we eventually release that reference, for example, in case the netdev is dismantled, otherwise we leak the program. Fixes: 86994156 ("net/mlx5e: XDP fast RX drop bpf programs support") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
There are multiple issues in mlx5e_xdp_set(): 1) The batched bpf_prog_add() is currently not checked for errors. When doing so, it should be done at an earlier point in time to makes sure that we cannot fail anymore at the time we want to set the program for each channel. The batched refs short-cut can only be performed when we don't need to perform a reset for changing the rq type and the device was in opened state. In case the device was not in opened state, then the next mlx5e_open_locked() will aquire the refs from the control prog via mlx5e_create_rq(), same when we need to perform a reset. 2) When swapping the priv->xdp_prog, then no extra reference count must be taken since we got that from call path via dev_change_xdp_fd() already. Otherwise, we'd never be able to release the program. Also, bpf_prog_add() without checking the return code could fail. Fixes: 86994156 ("net/mlx5e: XDP fast RX drop bpf programs support") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
In mlx5e_create_rq(), when creating a new queue, we call bpf_prog_add() but without checking the return value. bpf_prog_add() can fail since 92117d84 ("bpf: fix refcnt overflow"), so we really must check it. Take the reference right when we assign it to the rq from priv->xdp_prog, and just drop the reference on error path. Destruction in mlx5e_destroy_rq() looks good, though. Fixes: 86994156 ("net/mlx5e: XDP fast RX drop bpf programs support") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 11月, 2016 8 次提交
-
-
由 Alexey Khoroshilov 提交于
at91ether_start_xmit() does not check for dma mapping errors. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tushar Dave 提交于
sunbmac uses '__u32' for dma handle while invoking kernel DMA APIs, instead of using dma_addr_t. This hasn't caused any 'incompatible pointer type' warning on SPARC because until now dma_addr_t is of type u32. However, recent changes in SPARC ATU (iommu) enables 64bit DMA and therefore dma_addr_t becomes of type u64. This makes 'incompatible pointer type' warnings inevitable. e.g. drivers/net/ethernet/sun/sunbmac.c: In function ‘bigmac_ether_init’: drivers/net/ethernet/sun/sunbmac.c:1166: warning: passing argument 3 of ‘dma_alloc_coherent’ from incompatible pointer type ./include/linux/dma-mapping.h:445: note: expected ‘dma_addr_t *’ but argument is of type ‘__u32 *’ This patch resolves above compiler warning. Signed-off-by: NTushar Dave <tushar.n.dave@oracle.com> Reviewed-by: Nchris hyser <chris.hyser@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tushar Dave 提交于
sunqe uses '__u32' for dma handle while invoking kernel DMA APIs, instead of using dma_addr_t. This hasn't caused any 'incompatible pointer type' warning on SPARC because until now dma_addr_t is of type u32. However, recent changes in SPARC ATU (iommu) enables 64bit DMA and therefore dma_addr_t becomes of type u64. This makes 'incompatible pointer type' warnings inevitable. e.g. drivers/net/ethernet/sun/sunqe.c: In function ‘qec_ether_init’: drivers/net/ethernet/sun/sunqe.c:883: warning: passing argument 3 of ‘dma_alloc_coherent’ from incompatible pointer type ./include/linux/dma-mapping.h:445: note: expected ‘dma_addr_t *’ but argument is of type ‘__u32 *’ drivers/net/ethernet/sun/sunqe.c:885: warning: passing argument 3 of ‘dma_alloc_coherent’ from incompatible pointer type ./include/linux/dma-mapping.h:445: note: expected ‘dma_addr_t *’ but argument is of type ‘__u32 *’ This patch resolves above compiler warnings. Signed-off-by: NTushar Dave <tushar.n.dave@oracle.com> Reviewed-by: Nchris hyser <chris.hyser@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Allocate resources dynamically for Upper layer driver's (ULD) like cxgbit, iw_cxgb4, cxgb4i and chcr. The resources allocated include Tx queues which are allocated when ULD register with cxgb4 driver and freed while un-registering. The Tx queues which are shared by ULD shall be allocated by first registering driver and un-allocated by last unregistering driver. Signed-off-by: NAtul Gupta <atul.gupta@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We obviously intended a bitwise AND here, not a logical one. Fixes: 8c978d05 ("liquidio CN23XX: Mailbox support") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
All Marvell Ethernet drivers actually build fine with COMPILE_TEST with a few warnings. We need to add a few HAS_DMA dependencies to fix linking failures on problematic architectures like m32r. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
There are only a handful of Freescale Ethernet drivers that don't actually build with COMPILE_TEST: * FEC, for which we would need to define a default register layout if no supported architecture is defined * UCC_GETH which depends on PowerPC cpm.h header (which could be moved to a generic location) * GIANFAR needs to depend on HAS_DMA to fix linking failures on some architectures (like m32r) We need to fix an unmet dependency to get there though: warning: (FSL_XGMAC_MDIO) selects OF_MDIO which has unmet direct dependencies (OF && PHYLIB) which would result in CONFIG_OF_MDIO=[ym] without CONFIG_OF to be set. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
FS is a global symbol used by the x86 32-bit architecture, fixes builds re-definitions: >> drivers/net/ethernet/freescale/gianfar_ptp.c:75:0: warning: "FS" >> redefined #define FS (1<<28) /* FIPER start indication */ In file included from arch/x86/include/uapi/asm/ptrace.h:5:0, from arch/x86/include/asm/ptrace.h:6, from arch/x86/include/asm/math_emu.h:4, from arch/x86/include/asm/processor.h:11, from include/linux/mutex.h:19, from include/linux/kernfs.h:13, from include/linux/sysfs.h:15, from include/linux/kobject.h:21, from include/linux/device.h:17, from drivers/net/ethernet/freescale/gianfar_ptp.c:23: arch/x86/include/uapi/asm/ptrace-abi.h:15:0: note: this is the location of the previous definition #define FS 9 Reported-by: Nkbuild test robot <lkp@intel.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-