- 05 11月, 2014 2 次提交
-
-
由 Jaegeuk Kim 提交于
If a system wants to reduce the booting time as a top priority, now we can use a mount option, -o fastboot. With this option, f2fs conducts a little bit slow write_checkpoint, but it can avoid the node page reads during the next mount time. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch simplifies the inline_data usage with the following rule. 1. inline_data is set during the file creation. 2. If new data is requested to be written ranges out of inline_data, f2fs converts that inode permanently. 3. There is no cases which converts non-inline_data inode to inline_data. 4. The inline_data flag should be changed under inode page lock. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 04 11月, 2014 5 次提交
-
-
由 Jaegeuk Kim 提交于
If the inode has inline_dentry, we should not truncate any block indices. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
Add inline dir functions into normal dir ops' function to handle inline ops. Besides, we enable inline dir mode when a new dir inode is created if inline_data option is on. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch fixes to call f2fs_unlock_op, which was missing before. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
The sceanrio is like this. inline_data i_size page write_begin/vm_page_mkwrite X 30 dirty_page X 30 write to #4096 position X 30 get_dnode_of_data wait for get_dnode_of_data O 30 write inline_data O 30 get_dnode_of_data O 30 reserve data block .. In this case, we have #0 = NEW_ADDR and inline_data as well. We should not allow this condition for further access. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
Let's consider the following scenario. blkaddr[0] inline_data i_size i_blocks writepage truncate NEW X 4096 2 dirty page #0 NEW X 0 change i_size NEW X 0 2 f2fs_write_inline_data NEW X 0 2 get_dnode_of_data NEW X 0 2 truncate_data_blocks_range NULL O 0 1 memcpy(inline_data) NULL O 0 1 f2fs_put_dnode NULL O 0 1 f2fs_truncate NULL O 0 1 get_dnode_of_data NULL O 0 1 *invalid block addr* This patch adds checking inline_data flag during f2fs_truncate not to refer corrupted block indices. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 08 10月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch adds support for volatile writes which keep data pages in memory until f2fs_evict_inode is called by iput. For instance, we can use this feature for the sqlite database as follows. While supporting atomic writes for main database file, we can keep its journal data temporarily in the page cache by the following sequence. 1. open -> ioctl(F2FS_IOC_START_VOLATILE_WRITE); 2. writes : keep all the data in the page cache. 3. flush to the database file with atomic writes a. ioctl(F2FS_IOC_START_ATOMIC_WRITE); b. writes c. ioctl(F2FS_IOC_COMMIT_ATOMIC_WRITE); 4. close -> drop the cached data Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 07 10月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch introduces a very limited functionality for atomic write support. In order to support atomic write, this patch adds two ioctls: o F2FS_IOC_START_ATOMIC_WRITE o F2FS_IOC_COMMIT_ATOMIC_WRITE The database engine should be aware of the following sequence. 1. open -> ioctl(F2FS_IOC_START_ATOMIC_WRITE); 2. writes : all the written data will be treated as atomic pages. 3. commit -> ioctl(F2FS_IOC_COMMIT_ATOMIC_WRITE); : this flushes all the data blocks to the disk, which will be shown all or nothing by f2fs recovery procedure. 4. repeat to #2. The IO pattens should be: ,- START_ATOMIC_WRITE ,- COMMIT_ATOMIC_WRITE CP | D D D D D D | FSYNC | D D D D | FSYNC ... `- COMMIT_ATOMIC_WRITE Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 01 10月, 2014 2 次提交
-
-
由 Jaegeuk Kim 提交于
This patch cleans up f2fs_ioctl functions for better readability. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch introduces FITRIM in f2fs_ioctl. In this case, f2fs will issue small discards and prefree discards as many as possible for the given area. Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 24 9月, 2014 4 次提交
-
-
由 Chao Yu 提交于
Now punching hole in directory is not supported in f2fs, so let's limit file type in punch_hole(). In addition, in punch_hole if offset is exceed file size, we should skip punching hole. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
By using FALLOC_FL_KEEP_SIZE in ->fallocate of f2fs, we can fallocate block past EOF without changing i_size of inode. These blocks past EOF will not be truncated in ->setattr as we truncate them only when change the file size. We should give a chance to truncate blocks out of filesize in setattr(). Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
In f2fs_sync_file, if there is no written appended writes, it skips to write its node blocks. But, if there is up-to-date inode page, we should write it to update its metadata during the roll-forward recovery. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch revisited whole the recovery information during the f2fs_sync_file. In this patch, there are three information to make a decision. a) IS_CHECKPOINTED, /* is it checkpointed before? */ b) HAS_FSYNCED_INODE, /* is the inode fsynced before? */ c) HAS_LAST_FSYNC, /* has the latest node fsync mark? */ And, the scenarios for our rule are based on: [Term] F: fsync_mark, D: dentry_mark 1. inode(x) | CP | inode(x) | dnode(F) 2. inode(x) | CP | inode(F) | dnode(F) 3. inode(x) | CP | dnode(F) | inode(x) | inode(F) 4. inode(x) | CP | dnode(F) | inode(F) 5. CP | inode(x) | dnode(F) | inode(DF) 6. CP | inode(DF) | dnode(F) 7. CP | dnode(F) | inode(DF) 8. CP | dnode(F) | inode(x) | inode(DF) For example, #3, the three conditions should be changed as follows. inode(x) | CP | dnode(F) | inode(x) | inode(F) a) x o o o o b) x x x x o c) x o o x o If f2fs_sync_file stops ------^, it should write inode(F) --------------^ So, the need_inode_block_update should return true, since c) get_nat_flag(e, HAS_LAST_FSYNC), is false. For example, #8, CP | alloc | dnode(F) | inode(x) | inode(DF) a) o x x x x b) x x x o c) o o x o If f2fs_sync_file stops -------^, it should write inode(DF) --------------^ Note that, the roll-forward policy should follow this rule, which means, if there are any missing blocks, we doesn't need to recover that inode. Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 16 9月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
If user wrote F2FS_IPU_FSYNC:4 in /sys/fs/f2fs/ipu_policy, f2fs_sync_file only starts to try in-place-updates. And, if the number of dirty pages is over /sys/fs/f2fs/min_fsync_blocks, it keeps out-of-order manner. Otherwise, it triggers in-place-updates. This may be used by storage showing very high random write performance. For example, it can be used when, Seq. writes (Data) + wait + Seq. writes (Node) is pretty much slower than, Rand. writes (Data) Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 11 9月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch is to remove lengthy name by adding a new variable. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 10 9月, 2014 2 次提交
-
-
由 Jaegeuk Kim 提交于
If application throws negative value of lseek with SEEK_DATA|SEEK_HOLE, previous f2fs went into BUG_ON in get_dnode_of_data, which was reported by Tommi Rantala. He could make a simple code to detect this having: lseek(fd, -17595150933902LL, SEEK_DATA); This patch should resolve that bug. Reported-by: NTommi Rentala <tt.rantala@gmail.com> [Jaegeuk Kim: relocate the condition as suggested by Chao] Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
If any f2fs_bug_on is triggered, fsck.f2fs is needed. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 04 9月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch adds three inline functions to clean up dirty casting codes. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 22 8月, 2014 2 次提交
-
-
由 Chao Yu 提交于
This patch introduce need_do_checkpoint() to include numerous judgment condition for readability. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
The init_inode_metadata calls truncate_blocks when error is occurred. The callers holds f2fs_lock_op, so we should not call it again in truncate_blocks. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 20 8月, 2014 2 次提交
-
-
由 Jaegeuk Kim 提交于
If mkwrite is called to an inode having inline_data, it can overwrite the data index space as NEW_ADDR. (e.g., the first 4 bytes are coincidently zero) Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 arter97 提交于
Fix typo and some grammatical errors. The words "filesystem" and "readahead" are being used without the space treewide. Signed-off-by: NPark Ju Hyung <qkrwngud825@gmail.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 05 8月, 2014 1 次提交
-
-
由 Chao Yu 提交于
This patch adds f2fs_balance_fs in expand_inode_data to avoid allocation failure with segment. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 31 7月, 2014 3 次提交
-
-
由 Jaegeuk Kim 提交于
This patch fixes wrong coding style. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch enforces in-place-updates only when fdatasync is requested. If we adopt this in-place-updates for the fdatasync, we can skip to write the recovery information. Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch intends to improve the fsync performance by skipping remaining the recovery information, only when there is no data that we should recover. Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 10 7月, 2014 2 次提交
-
-
由 Chao Yu 提交于
In this patch we use below inner macro and function to clean up codes. 1. ADDRS_PER_PAGE 2. SM_I 3. f2fs_readonly Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
After we call find_data_page in truncate_partial_data_page, we could not guarantee this page is updated or not as error may occurred in lower layer. We'd better check status of the page to avoid this no updated page be writebacked to device. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 23 6月, 2014 2 次提交
-
-
由 Jaegeuk Kim 提交于
This patch fixes the fallocate bug like below. (See xfstests/255) In fallocate(fd, 0, 20480), expand_inode_data processes for (index = pg_start; index <= pg_end; index++) { f2fs_reserve_block(); ... } So, even though fallocate requests 20480, 5 blocks, f2fs allocates 6 blocks including pg_end. So, this patch adds one condition to avoid block allocation. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch arranges the f2fs_locks to cover the fallocated data and its i_size. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 12 6月, 2014 1 次提交
-
-
由 Al Viro 提交于
iter_file_splice_write() - a ->splice_write() instance that gathers the pipe buffers, builds a bio_vec-based iov_iter covering those and feeds it to ->write_iter(). A bunch of simple cases coverted to that... [AV: fixed the braino spotted by Cyrill] Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 08 6月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch links f2fs_fiemap with generic function with get_block. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 07 6月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
If a fallocated file is fsynced, we should recover the i_size after sudden power cut. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 07 5月, 2014 5 次提交
-
-
由 Chao Yu 提交于
Previous we do not truncate inline data in inode page when setattr, so following case could still read the inline data which has already truncated: 1.write inline data 2.ftruncate size to 0 3.ftruncate size to max inline data size 4.read from offset 0 This patch introduces truncate_inline_data() to fix this problem. change log from v1: o fix a bug and do not truncate first page data after truncate inline data. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
If an amount of data are allocated though fallocate and user writes a couple of data among the space, f2fs should return the data offset made by user when SEEK_DATA is requested. For example, (N: NEW_ADDR by fallocate, X: NEW_ADDR by user) 1) fallocate 0 ~ 10MB f -> N N N N N N N N N N N N ... N 2) write 4KB at 5MB offset f -> N N N N N X N N N N N N ... N 3) SEEK_DATA from 0 should return 5MB offset So, this patch adds a routine to search the first dirty page to handle that. Then, the SEEK_DATA flow skips NEW_ADDR offsets until any dirty page is found. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
When SEEK_HOLE is requeted, it should return i_size if the hole position is found outside of i_size. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Chao Yu 提交于
In This patch we introduce f2fs_seek_block to support SEEK_{DATA,HOLE} of lseek(2). change log from v1: o fix bug when lseek from middle of page and fix wrong calculation of PGOFS_OF_NEXT_DNODE macro. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Chao Yu 提交于
Introduce help macro ADDRS_PER_PAGE() to get the number of address pointers in direct node or inode. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-