We met lockdep warning when enable and disable the bearer for commands such as:

tipc-config -netid=1234 -addr=1.1.3 -be=eth:eth0
tipc-config -netid=1234 -addr=1.1.3 -bd=eth:eth0

---------------------------------------------------

[  327.693595] ======================================================
[  327.693994] [ INFO: possible circular locking dependency detected ]
[  327.694519] 3.11.0-rc3-wwd-default #4 Tainted: G           O
[  327.694882] -------------------------------------------------------
[  327.695385] tipc-config/5825 is trying to acquire lock:
[  327.695754]  (((timer))#2){+.-...}, at: [<ffffffff8105be80>] del_timer_sync+0x0/0xd0
[  327.696018]
[  327.696018] but task is already holding lock:
[  327.696018]  (&(&b_ptr->lock)->rlock){+.-...}, at: [<ffffffffa02be58d>] bearer_disable+  0xdd/0x120 [tipc]
[  327.696018]
[  327.696018] which lock already depends on the new lock.
[  327.696018]
[  327.696018]
[  327.696018] the existing dependency chain (in reverse order) is:
[  327.696018]
[  327.696018] -> #1 (&(&b_ptr->lock)->rlock){+.-...}:
[  327.696018]        [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870
[  327.696018]        [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670
[  327.696018]        [<ffffffff810b4453>] lock_acquire+0x103/0x130
[  327.696018]        [<ffffffff814d65b1>] _raw_spin_lock_bh+0x41/0x80
[  327.696018]        [<ffffffffa02c5d48>] disc_timeout+0x18/0xd0 [tipc]
[  327.696018]        [<ffffffff8105b92a>] call_timer_fn+0xda/0x1e0
[  327.696018]        [<ffffffff8105bcd7>] run_timer_softirq+0x2a7/0x2d0
[  327.696018]        [<ffffffff8105379a>] __do_softirq+0x16a/0x2e0
[  327.696018]        [<ffffffff81053a35>] irq_exit+0xd5/0xe0
[  327.696018]        [<ffffffff81033005>] smp_apic_timer_interrupt+0x45/0x60
[  327.696018]        [<ffffffff814df4af>] apic_timer_interrupt+0x6f/0x80
[  327.696018]        [<ffffffff8100b70e>] arch_cpu_idle+0x1e/0x30
[  327.696018]        [<ffffffff810a039d>] cpu_idle_loop+0x1fd/0x280
[  327.696018]        [<ffffffff810a043e>] cpu_startup_entry+0x1e/0x20
[  327.696018]        [<ffffffff81031589>] start_secondary+0x89/0x90
[  327.696018]
[  327.696018] -> #0 (((timer))#2){+.-...}:
[  327.696018]        [<ffffffff810b33fe>] check_prev_add+0x43e/0x4b0
[  327.696018]        [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870
[  327.696018]        [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670
[  327.696018]        [<ffffffff810b4453>] lock_acquire+0x103/0x130
[  327.696018]        [<ffffffff8105bebd>] del_timer_sync+0x3d/0xd0
[  327.696018]        [<ffffffffa02c5855>] tipc_disc_delete+0x15/0x30 [tipc]
[  327.696018]        [<ffffffffa02be59f>] bearer_disable+0xef/0x120 [tipc]
[  327.696018]        [<ffffffffa02be74f>] tipc_disable_bearer+0x2f/0x60 [tipc]
[  327.696018]        [<ffffffffa02bfb32>] tipc_cfg_do_cmd+0x2e2/0x550 [tipc]
[  327.696018]        [<ffffffffa02c8c79>] handle_cmd+0x49/0xe0 [tipc]
[  327.696018]        [<ffffffff8143e898>] genl_family_rcv_msg+0x268/0x340
[  327.696018]        [<ffffffff8143ed30>] genl_rcv_msg+0x70/0xd0
[  327.696018]        [<ffffffff8143d4c9>] netlink_rcv_skb+0x89/0xb0
[  327.696018]        [<ffffffff8143e617>] genl_rcv+0x27/0x40
[  327.696018]        [<ffffffff8143d21e>] netlink_unicast+0x15e/0x1b0
[  327.696018]        [<ffffffff8143ddcf>] netlink_sendmsg+0x22f/0x400
[  327.696018]        [<ffffffff813f7836>] __sock_sendmsg+0x66/0x80
[  327.696018]        [<ffffffff813f7957>] sock_aio_write+0x107/0x120
[  327.696018]        [<ffffffff8117f76d>] do_sync_write+0x7d/0xc0
[  327.696018]        [<ffffffff8117fc56>] vfs_write+0x186/0x190
[  327.696018]        [<ffffffff811803e0>] SyS_write+0x60/0xb0
[  327.696018]        [<ffffffff814de852>] system_call_fastpath+0x16/0x1b
[  327.696018]
[  327.696018] other info that might help us debug this:
[  327.696018]
[  327.696018]  Possible unsafe locking scenario:
[  327.696018]
[  327.696018]        CPU0                    CPU1
[  327.696018]        ----                    ----
[  327.696018]   lock(&(&b_ptr->lock)->rlock);
[  327.696018]                                lock(((timer))#2);
[  327.696018]                                lock(&(&b_ptr->lock)->rlock);
[  327.696018]   lock(((timer))#2);
[  327.696018]
[  327.696018]  *** DEADLOCK ***
[  327.696018]
[  327.696018] 5 locks held by tipc-config/5825:
[  327.696018]  #0:  (cb_lock){++++++}, at: [<ffffffff8143e608>] genl_rcv+0x18/0x40
[  327.696018]  #1:  (genl_mutex){+.+.+.}, at: [<ffffffff8143ed66>] genl_rcv_msg+0xa6/0xd0
[  327.696018]  #2:  (config_mutex){+.+.+.}, at: [<ffffffffa02bf889>] tipc_cfg_do_cmd+0x39/ 0x550 [tipc]
[  327.696018]  #3:  (tipc_net_lock){++.-..}, at: [<ffffffffa02be738>] tipc_disable_bearer+ 0x18/0x60 [tipc]
[  327.696018]  #4:  (&(&b_ptr->lock)->rlock){+.-...}, at: [<ffffffffa02be58d>]             bearer_disable+0xdd/0x120 [tipc]
[  327.696018]
[  327.696018] stack backtrace:
[  327.696018] CPU: 2 PID: 5825 Comm: tipc-config Tainted: G           O 3.11.0-rc3-wwd-    default #4
[  327.696018] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[  327.696018]  00000000ffffffff ffff880037fa77a8 ffffffff814d03dd 0000000000000000
[  327.696018]  ffff880037fa7808 ffff880037fa77e8 ffffffff810b1c4f 0000000037fa77e8
[  327.696018]  ffff880037fa7808 ffff880037e4db40 0000000000000000 ffff880037e4e318
[  327.696018] Call Trace:
[  327.696018]  [<ffffffff814d03dd>] dump_stack+0x4d/0xa0
[  327.696018]  [<ffffffff810b1c4f>] print_circular_bug+0x10f/0x120
[  327.696018]  [<ffffffff810b33fe>] check_prev_add+0x43e/0x4b0
[  327.696018]  [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870
[  327.696018]  [<ffffffff81087a28>] ? sched_clock_cpu+0xd8/0x110
[  327.696018]  [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670
[  327.696018]  [<ffffffff810b4453>] lock_acquire+0x103/0x130
[  327.696018]  [<ffffffff8105be80>] ? try_to_del_timer_sync+0x70/0x70
[  327.696018]  [<ffffffff8105bebd>] del_timer_sync+0x3d/0xd0
[  327.696018]  [<ffffffff8105be80>] ? try_to_del_timer_sync+0x70/0x70
[  327.696018]  [<ffffffffa02c5855>] tipc_disc_delete+0x15/0x30 [tipc]
[  327.696018]  [<ffffffffa02be59f>] bearer_disable+0xef/0x120 [tipc]
[  327.696018]  [<ffffffffa02be74f>] tipc_disable_bearer+0x2f/0x60 [tipc]
[  327.696018]  [<ffffffffa02bfb32>] tipc_cfg_do_cmd+0x2e2/0x550 [tipc]
[  327.696018]  [<ffffffff81218783>] ? security_capable+0x13/0x20
[  327.696018]  [<ffffffffa02c8c79>] handle_cmd+0x49/0xe0 [tipc]
[  327.696018]  [<ffffffff8143e898>] genl_family_rcv_msg+0x268/0x340
[  327.696018]  [<ffffffff8143ed30>] genl_rcv_msg+0x70/0xd0
[  327.696018]  [<ffffffff8143ecc0>] ? genl_lock+0x20/0x20
[  327.696018]  [<ffffffff8143d4c9>] netlink_rcv_skb+0x89/0xb0
[  327.696018]  [<ffffffff8143e608>] ? genl_rcv+0x18/0x40
[  327.696018]  [<ffffffff8143e617>] genl_rcv+0x27/0x40
[  327.696018]  [<ffffffff8143d21e>] netlink_unicast+0x15e/0x1b0
[  327.696018]  [<ffffffff81289d7c>] ? memcpy_fromiovec+0x6c/0x90
[  327.696018]  [<ffffffff8143ddcf>] netlink_sendmsg+0x22f/0x400
[  327.696018]  [<ffffffff813f7836>] __sock_sendmsg+0x66/0x80
[  327.696018]  [<ffffffff813f7957>] sock_aio_write+0x107/0x120
[  327.696018]  [<ffffffff813fe29c>] ? release_sock+0x8c/0xa0
[  327.696018]  [<ffffffff8117f76d>] do_sync_write+0x7d/0xc0
[  327.696018]  [<ffffffff8117fa24>] ? rw_verify_area+0x54/0x100
[  327.696018]  [<ffffffff8117fc56>] vfs_write+0x186/0x190
[  327.696018]  [<ffffffff811803e0>] SyS_write+0x60/0xb0
[  327.696018]  [<ffffffff814de852>] system_call_fastpath+0x16/0x1b

-----------------------------------------------------------------------

The problem is that the tipc_link_delete() will cancel the timer disc_timeout() when
the b_ptr->lock is hold, but the disc_timeout() still call b_ptr->lock to finish the
work, so the dead lock occurs.

We should unlock the b_ptr->lock when del the disc_timeout().

Remove link_timeout() still met the same problem, the patch:

http://article.gmane.org/gmane.network.tipc.general/4380

fix the problem, so no need to send patch for fix link_timeout() deadlock warming.
Signed-off-by: NWang Weidong <wangweidong1@huawei.com>
Signed-off-by: NDing Tianhong <dingtianhong@huawei.com>
Acked-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add InfiniBand media type based on the ethernet media type.

The only real difference is that in case of InfiniBand, we need the entire
20 bytes of space reserved for media addresses, so the TIPC media type ID is
not explicitly stored in the packet payload.

Sample output of tipc-config:

# tipc-config -v -addr -netid -nt=all -p -m -b -n -ls

node address: <10.1.4>
current network id: 4711
Type       Lower      Upper      Port Identity              Publication Scope
0          167776257  167776257  <10.1.1:1855512577>        1855512578  cluster
           167776260  167776260  <10.1.4:1216454657>        1216454658  zone
1          1          1          <10.1.4:1216479235>        1216479236  node
Ports:
1216479235: bound to {1,1}
1216454657: bound to {0,167776260}
Media:
eth
ib
Bearers:
ib:ib0
Nodes known:
<10.1.1>: up
Link <broadcast-link>
  Window:20 packets
  RX packets:0 fragments:0/0 bundles:0/0
  TX packets:0 fragments:0/0 bundles:0/0
  RX naks:0 defs:0 dups:0
  TX naks:0 acks:0 dups:0
  Congestion bearer:0 link:0  Send queue max:0 avg:0

Link <10.1.4:ib0-10.1.1:ib0>
  ACTIVE  MTU:2044  Priority:10  Tolerance:1500 ms  Window:50 packets
  RX packets:80 fragments:0/0 bundles:0/0
  TX packets:40 fragments:0/0 bundles:0/0
  TX profile sample:22 packets  average:54 octets
  0-64:100% -256:0% -1024:0% -4096:0% -16384:0% -32768:0% -66000:0%
  RX states:410 probes:213 naks:0 defs:0 dups:0
  TX states:410 probes:197 naks:0 acks:0 dups:0
  Congestion bearer:0 link:0  Send queue max:1 avg:0
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some network protocols, like InfiniBand, don't have a fixed broadcast
address but one that depends on the configuration. Move the bcast_addr
to struct tipc_bearer and initialize it with the broadcast address of
the network device when the bearer is enabled.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently at the TIPC bearer layer there is the following congestion
mechanism:

Once sending packets has failed via that bearer, the bearer will be
flagged as being in congested state at once. During bearer congestion,
all packets arriving at link will be queued on the link's outgoing
buffer.  When we detect that the state of bearer congestion has
relaxed (e.g. some packets are received from the bearer) we will try
our best to push all packets in the link's outgoing buffer until the
buffer is empty, or until the bearer is congested again.

However, in fact the TIPC bearer never receives any feedback from the
device layer whether a send was successful or not, so it must always
assume it was successful. Therefore, the bearer congestion mechanism
as it exists currently is of no value.

But the bearer blocking state is still useful for us. For example,
when the physical media goes down/up, we need to change the state of
the links bound to the bearer.  So the code maintaing the state
information is not removed.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

After eliminating the mechanism which checks whether all letters
in media name string are within a given character set, the
media_name_valid routine becomes trivial.  It is also only
used once, so it is unnecessary to keep it as a separate function.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no real reason to check whether all letters in the given
media name and network interface name are within the character set
defined in tipc_alphabet array. Even if we eliminate the checking,
the rest of checking conditions in tipc_enable_bearer() can ensure
we do not enable an invalid or illegal bearer.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The tipc_printf is renamed to tipc_snprintf, as the new name
describes more what the function actually does.  It is also
changed to take a buffer and length parameter and return
number of characters written to the buffer.  All callers of
this function that used to pass a print_buf are updated.

Final removal of the struct print_buf itself will be done
synchronously with the pending removal of the deprecated
logging code that also was using it.

Functions that build up a response message with a list of
ports, nametable contents etc. are changed to return the number
of characters written to the output buffer. This information
was previously hidden in a field of the print_buf struct, and
the number of chars written was fetched with a call to
tipc_printbuf_validate.  This function is removed since it
is no longer referenced nor needed.

A generic max size ULTRA_STRING_MAX_LEN is defined, named
in keeping with the existing TIPC_TLV_ULTRA_STRING, and the
various definitions in port, link and nametable code that
largely duplicated this information are removed.  This means
that amount of link statistics that can be returned is now
increased from 2k to 32k.

The buffer overflow check is now done just before the reply
message is passed over netlink or TIPC to a remote node and
the message indicating a truncated buffer is changed to a less
dramatic one (less CAPS), placed at the end of the message.
Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

All messages should go directly to the kernel log.  The TIPC
specific error, warning, info and debug trace macro's are
removed and all references replaced with pr_err, pr_warn,
pr_info and pr_debug.

Commonly used sub-strings are explicitly declared as a const
char to reduce .text size.

Note that this means the debug messages (changed to pr_debug),
are now enabled through dynamic debugging, instead of a TIPC
specific Kconfig option (TIPC_DEBUG).  The latter will be
phased out completely
Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
[PG: use pr_fmt as suggested by Joe Perches <joe@perches.com>]
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Fix incorrect start markers, wrapped summary lines, missing section
breaks, incorrect separators, and some name mismatches.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some of the comment blocks are floating in limbo between two
functions, or between blocks of code.  Delete the extra line
feeds between any comment and its associated following block
of code, to be consistent with the majority of the rest of
the kernel.  Also delete trailing newlines at EOF and fix
a couple trivial typos in existing comments.

This is a 100% cosmetic change with no runtime impact.  We get
rid of over 500 lines of non-code, and being blank line deletes,
they won't even show up as noise in git blame.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Introduces routines that test whether a given network address is
equal to a node's own network address or if it lies within the node's
own network cluster, and which work properly regardless of whether
the node is using the default network address <0.0.0> or a non-zero
network address that is assigned later on. In essence, these routines
ensure that address <0.0.0> is treated as an alias for "this node",
regardless of which network address the node is actually using.

Old users of the pre-existing more strict match in_own_cluster()
have been accordingly redirected to what is now called
in_own_cluster_exact() --- which does not extend matching to <0,0,0>.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Removes all references to the global variable that records whether
TIPC is running in "single node" mode or "network" mode, since this
information can be easily deduced from the global variable that
records TIPC's network address. (i.e. a non-zero network address
means that TIPC is running in network mode.)

The changes made update most existing mode-based checks to use the
network address global variable. A few checks that are no longer
needed are removed entirely, along with any associated code lying on
non-executable control paths.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Simplifies a comparison operation to eliminate a useless test that
checks if an unsigned value is less than zero.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

The addition of the "s" to indicate pluralization is intentional,
since the struct actually contains two name variants.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

This converts the following:

	struct link		->	struct tipc_link
	struct link_req		->	struct tipc_link_req
	struct link_name	->	struct tipc_link_name
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Give it a meaningful prefix, as suggested by DaveM, so that it
is consistent with things like struct tipc_bearer, and so it isn't
confused with anything else.  This has no impact on the actual
runtime code behaviour.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Permits run-time alteration of default link settings on a per-media
and per-bearer basis, in addition to the existing per-link basis.
The following syntax can now be used:

    tipc-config -lt=<link-name|bearer-name|media-name>/<tolerance>
    tipc-config -lp=<link-name|bearer-name|media-name>/<priority>
    tipc-config -lw=<link-name|bearer-name|media-name>/<window>

Note that changes to the default settings for a given media type has
no effect on the default settings used by existing bearers. Similarly,
changes to default bearer settings has no effect on existing link
endpoints that utilize that interface.

Thanks to Florian Westphal <fw@strlen.de> for his contributions to
the development of this enhancement.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Reworks TIPC's media address data structure and associated processing
routines to transfer all media-specific details of address conversion
to the associated TIPC media adaptation code. TIPC's generic bearer code
now only needs to know which media type an address is associated with
and whether or not it is a broadcast address, and totally ignores the
"value" field that contains the actual media-specific addressing info.

These changes eliminate the need for a number of endianness conversion
operations and will make it easier for TIPC to support new media types
in the future.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Enhances conversion of a media address to printable form so that an
unconvertable address will be displayed as a string of hex digits,
rather than not being displayed at all. (Also removes a pointless check
for the existence of the media-specific address conversion routine,
since the routine is not optional.)
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Simplifies error handling performed during media registration, since
TIPC no longer supports the dynamic addition of new media types that
are potentially error-prone. These simplifications include the following:

1) No longer check for premature registration of a new media type.
2) No longer check for negative link priority values (which was pointless
   since such values are unsigned, and could cause a compiler warning).
3) No longer generate a warning describing the exact cause of any
   registration failure (just warns that overall registration failed).
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Changes TIPC's list of registered media types from an array of media
structures to an array of pointers to media structures. This eliminates
the need to copy of the contents of the structure passed in during media
registration.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Streamlines the detection of an attempt to register a TIPC media structure
using an already registered name or type identifier. The revised logic now
reuses an existing routine to detect an existing name and no longer
unnecessarily manipulates the media type counter during an unsuccessful
registration attempt.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Speeds up the registration of TIPC media types by passing in a structure
containing the required information, rather than by passing in the various
fields describing the media type individually.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Modifies code that disables a bearer to ensure that all of its links
are deleted, not just its uncongested links. Similarly, modifies code
that blocks a bearer to ensure that all of its links are reset, not
just its uncongested links.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Eliminates code associated with the sending of unsent broadcast link
traffic when the broadcast pseudo-bearer becomes unblocked following a
temporary congestion situation. This code is non-executable because the
broadcast pseudo-bearer never becomes blocked [see tipc_bcbearer_send()].
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Gets rid of counter that records the number of times a bearer has
resumed after congestion or blocking, since the value is never
referenced anywhere.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Augments TIPC's discovery object to track the number of neighboring nodes
having an active link to the associated bearer.

This means tipc_disc_update_link_req() becomes either one of:

       tipc_disc_add_dest()
or:
       tipc_disc_remove_dest()

depending on the code flow direction of things.
Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Modifies bearer creation and deletion code to improve handling of
scenarios when a neighbor discovery object cannot be created. The
creation routine now aborts the creation of a bearer if its discovery
object cannot be created, and deletes the newly created bearer, rather
than failing quietly and leaving an unusable bearer hanging around.

Since the exit via the goto label really isn't a definitive failure
in all cases, relabel it appropriately.
Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Enhances existing checks on the discovery domain associated with a TIPC
bearer. A bearer can no longer be configured to accept links from itself
only (which would be pointless), or to nodes outside its own cluster
(since multi-cluster support has now been removed from TIPC). Also, the
neighbor discovery routine now validates link setup requests against the
configured discovery domain for the bearer, rather than simply ensuring
the requesting node belongs to the node's own cluster.
Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Eliminates the flag in the TIPC bearer structure that indicates if
the bearer supports broadcasting, since the flag is always set to 1
and serves no useful purpose.
Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Eliminates a field in TIPC's bearer objects that is set, but never
referenced.
Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Renames items that are improperly labelled as "network scope" items
(which are represented by simple integer values) rather than "network
domain" items (which are represented by <Z.C.N>-type network addresses).
This change is purely cosmetic, and does not affect the operation of TIPC.
Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Eliminates support for the "number of requested links" field in a neighbor
discovery message. This field was never used and has been removed from
the TIPC 2.0 protocol specification.
Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Combines two distinct structures containing information about a TIPC bearer
into a single structure. The structures were previously kept separate so
that public information about a bearer could be made available to plug-in
media types using TIPC's native API, while the remaining information was
kept private for use by TIPC itself. However, now that the native API has
been removed there is no longer any need for this arrangement.

Since one of the structures was already embedded within the other, the
change largely involves replacing instances of "publ.foo" with "foo".
The changes do not otherwise alter the operation of TIPC bearers.
Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Cleans up TIPC's source code to eliminate the presence of unnecessary
use of {} around single statements.

These changes are purely cosmetic and do not alter the operation of TIPC
in any way.
Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Cleans up TIPC's source code to eliminate the needless initialization
of static variables to zero.

These changes are purely cosmetic and do not alter the operation of TIPC
in any way.
Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Cleans up TIPC's source code to eliminate assigning values to variables
within conditional expressions, improving code readability and reducing
warnings from various code checker tools.

These changes are purely cosmetic and do not alter the operation of TIPC
in any way.
Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eliminates a number of #include statements that no longer serve any
useful purpose.
Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eliminates obsolete calls to two of TIPC's main debugging macros, as well
as a pair of associated debugging routines that are no longer required.
Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Modifies bearer_disable() to return void since it always indicates
success anyway.
Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>