- 08 6月, 2016 3 次提交
-
-
由 Jakub Kicinski 提交于
Return an error if user requested skip-sw and the underlaying hardware cannot handle tc offloads (or offloads are disabled). Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
'err' variable is not set in this test, we would return whatever previous test set 'err' to. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NSridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
My prior attempt to fix the backlogs of parents failed. If we return NET_XMIT_CN, our parents wont increase their backlog, so our qdisc_tree_reduce_backlog() should take this into account. v2: Florian Westphal pointed out that we could drop the packet, so we need to save qdisc_pkt_len(skb) in a temp variable before calling fq_codel_drop() Fixes: 9d18562a ("fq_codel: add batch ability to fq_codel_drop()") Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Reported-by: NStas Nichiporovich <stasn77@gmail.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 6月, 2016 1 次提交
-
-
由 WANG Cong 提交于
For gso_skb we only update qlen, backlog should be updated too. Note, it is correct to just update these stats at one layer, because the gso_skb is cached there. Reported-by: NStas Nichiporovich <stasn77@gmail.com> Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 6月, 2016 5 次提交
-
-
由 WANG Cong 提交于
Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
We need to update backlog too when we update qlen. Joint work with Stas. Reported-by: NStas Nichiporovich <stasn77@gmail.com> Tested-by: NStas Nichiporovich <stasn77@gmail.com> Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
hfsc updates backlog lazily, that is only when we dump the stats. This is problematic after we begin to update backlog in qdisc_tree_reduce_backlog(). Reported-by: NStas Nichiporovich <stasn77@gmail.com> Tested-by: NStas Nichiporovich <stasn77@gmail.com> Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 5月, 2016 2 次提交
-
-
由 Jamal Hadi Salim 提交于
Policer was not dumping or updating timestamps Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
I found a serious performance bug in packet schedulers using hrtimers. sch_htb and sch_fq are definitely impacted by this problem. We constantly rearm high resolution timers if some packets are throttled in one (or more) class, and other packets are flying through qdisc on another (non throttled) class. hrtimer_start() does not have the mod_timer() trick of doing nothing if expires value does not change : if (timer_pending(timer) && timer->expires == expires) return 1; This issue is particularly visible when multiple cpus can queue/dequeue packets on the same qdisc, as hrtimer code has to lock a remote base. I used following fix : 1) Change htb to use qdisc_watchdog_schedule_ns() instead of open-coding it. 2) Cache watchdog prior expiration. hrtimer might provide this, but I prefer to not rely on some hrtimer internal. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 5月, 2016 1 次提交
-
-
由 WANG Cong 提交于
We saw the following extra refcount release on veth device: kernel: [7957821.463992] unregister_netdevice: waiting for mesos50284 to become free. Usage count = -1 Since we heavily use mirred action to redirect packets to veth, I think this is caused by the following race condition: CPU0: tcf_mirred_release(): (in RCU callback) struct net_device *dev = rcu_dereference_protected(m->tcfm_dev, 1); CPU1: mirred_device_event(): spin_lock_bh(&mirred_list_lock); list_for_each_entry(m, &mirred_list, tcfm_list) { if (rcu_access_pointer(m->tcfm_dev) == dev) { dev_put(dev); /* Note : no rcu grace period necessary, as * net_device are already rcu protected. */ RCU_INIT_POINTER(m->tcfm_dev, NULL); } } spin_unlock_bh(&mirred_list_lock); CPU0: tcf_mirred_release(): spin_lock_bh(&mirred_list_lock); list_del(&m->tcfm_list); spin_unlock_bh(&mirred_list_lock); if (dev) // <======== Stil refers to the old m->tcfm_dev dev_put(dev); // <======== dev_put() is called on it again The action init code path is good because it is impossible to modify an action that is being removed. So, fix this by moving everything under the spinlock. Fixes: 2ee22a90 ("net_sched: act_mirred: remove spinlock in fast path") Fixes: 6bd00b85 ("act_mirred: fix a race condition on mirred_list") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 5月, 2016 4 次提交
-
-
由 Eric Dumazet 提交于
memory_usage must be decreased in dequeue_func(), not in fq_codel_dequeue(), otherwise packets dropped by Codel algo are missing this decrease. Also we need to clear memory_usage in fq_codel_reset() Fixes: 95b58430 ("fq_codel: add memory limitation per queue") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
Introduce a new command in ndo_setup_tc() for hardware offloaded filters, to call the NIC driver, and make it update the statistics. This will be done before dumping the filter and its statistics. Signed-off-by: NAmir Vadai <amirva@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
Implement the stats_update callback that will be called by NIC drivers for hardware offloaded filters. Signed-off-by: NAmir Vadai <amirva@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Samudrala, Sridhar 提交于
On devices that support TC U32 offloads, this flag enables a filter to be added only to HW. skip-sw and skip-hw are mutually exclusive flags. By default without any flags, the filter is added to both HW and SW, but no error checks are done in case of failure to add to HW. With skip-sw, failure to add to HW is treated as an error. Here is a sample script that adds 2 filters, one with skip-sw and the other with skip-hw flag. # add ingress qdisc tc qdisc add dev p4p1 ingress # enable hw tc offload. ethtool -K p4p1 hw-tc-offload on # add u32 filter with skip-sw flag. tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:1 u32 ht 800: flowid 800:1 \ skip-sw \ match ip src 192.168.1.0/24 \ action drop # add u32 filter with skip-hw flag. tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:2 u32 ht 800: flowid 800:2 \ skip-hw \ match ip src 192.168.2.0/24 \ action drop Signed-off-by: NSridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 5月, 2016 6 次提交
-
-
由 Jamal Hadi Salim 提交于
The process below was broken and is fixed with this patch. //add an ife action and give it an instance id of 1 sudo tc actions add action ife encode \ type 0xDEAD allow mark dst 02:15:15:15:15:15 index 1 //create a filter which binds to ife action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:11 action ife index 1 Message before fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
The process below was broken and is fixed with this patch. //add a skbedit action and give it an instance id of 1 sudo tc actions add action skbedit mark 10 index 1 //create a filter which binds to skbedit action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:10 action skbedit index 1 Message before fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
The process below was broken and is fixed with this patch. //add a simple action and give it an instance id of 1 sudo tc actions add action simple sdata "foobar" index 1 //create a filter which binds to simple action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:10 action simple index 1 Message before fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
The process below was broken and is fixed with this patch. //add an mirred action and give it an instance id of 1 sudo tc actions add action mirred egress mirror dev $MDEV index 1 //create a filter which binds to mirred action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:10 action mirred index 1 Message before bug fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
This was broken and is fixed with this patch. //add an ipt action and give it an instance id of 1 sudo tc actions add action ipt -j mark --set-mark 2 index 1 //create a filter which binds to ipt action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:10 action ipt index 1 Message before bug fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
Late vlan action binding was broken and is fixed with this patch. //add a vlan action to pop and give it an instance id of 1 sudo tc actions add action vlan pop index 1 //create filter which binds to vlan action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32 \ match ip dst 17.0.0.1/32 flowid 1:1 action vlan index 1 current message(before bug fix) was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 5月, 2016 1 次提交
-
-
由 Eric Dumazet 提交于
On small embedded routers, one wants to control maximal amount of memory used by fq_codel, instead of controlling number of packets or bytes, since GRO/TSO make these not practical. Assuming skb->truesize is accurate, we have to keep track of skb->truesize sum for skbs in queue. This patch adds a new TCA_FQ_CODEL_MEMORY_LIMIT attribute. I chose a default value of 32 MBytes, which looks reasonable even for heavy duty usages. (Prior fq_codel users should not be hurt when they upgrade their kernels) Two fields are added to tc_fq_codel_qd_stats to report : - Current memory usage - Number of drops caused by memory limits # tc qd replace dev eth1 root est 1sec 4sec fq_codel memory_limit 4M .. # tc -s -d qd sh dev eth1 qdisc fq_codel 8008: root refcnt 257 limit 10240p flows 1024 quantum 1514 target 5.0ms interval 100.0ms memory_limit 4Mb ecn Sent 2083566791363 bytes 1376214889 pkt (dropped 4994406, overlimits 0 requeues 21705223) rate 9841Mbit 812549pps backlog 3906120b 376p requeues 21705223 maxpacket 68130 drop_overlimit 4994406 new_flow_count 28855414 ecn_mark 0 memory_used 4190048 drop_overmemory 4994406 new_flows_len 1 old_flows_len 177 Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Dave Täht <dave.taht@gmail.com> Cc: Sebastian Möller <moeller0@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 5月, 2016 1 次提交
-
-
由 Alexei Starovoitov 提交于
allow cls_bpf and act_bpf programs access skb->data and skb->data_end pointers. The bpf helpers that change skb->data need to update data_end pointer as well. The verifier checks that programs always reload data, data_end pointers after calls to such bpf helpers. We cannot add 'data_end' pointer to struct qdisc_skb_cb directly, since it's embedded as-is by infiniband ipoib, so wrapper struct is needed. Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 5月, 2016 2 次提交
-
-
由 Florian Westphal 提交于
previous patches removed all direct accesses to dev->trans_start, so change the netif_trans_update helper to update trans_start of netdev queue 0 instead and then remove trans_start from struct net_device. AFAICS a lot of the netif_trans_update() invocations are now useless because they occur in ndo_start_xmit and driver doesn't set LLTX (i.e. stack already took care of the update). As I can't test any of them it seems better to just leave them alone. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: NFlorian Westphal <fw@strlen.de> Acked-by: NFelipe Balbi <felipe.balbi@linux.intel.com> Acked-by: NMugunthan V N <mugunthanvnm@ti.com> Acked-by: NAntonio Quartulli <a@unstable.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 5月, 2016 1 次提交
-
-
由 Eric Dumazet 提交于
In presence of inelastic flows and stress, we can call fq_codel_drop() for every packet entering fq_codel qdisc. fq_codel_drop() is quite expensive, as it does a linear scan of 4 KB of memory to find a fat flow. Once found, it drops the oldest packet of this flow. Instead of dropping a single packet, try to drop 50% of the backlog of this fat flow, with a configurable limit of 64 packets per round. TCA_FQ_CODEL_DROP_BATCH_SIZE is the new attribute to make this limit configurable. With this strategy the 4 KB search is amortized to a single cache line per drop [1], so fq_codel_drop() no longer appears at the top of kernel profile in presence of few inelastic flows. [1] Assuming a 64byte cache line, and 1024 buckets Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NDave Taht <dave.taht@gmail.com> Cc: Jonathan Morton <chromatix99@gmail.com> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Acked-by: Dave Taht Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 5月, 2016 1 次提交
-
-
由 Neil Horman 提交于
This was recently reported to me, and reproduced on the latest net kernel, when attempting to run netperf from a host that had a netem qdisc attached to the egress interface: [ 788.073771] ---------------------[ cut here ]--------------------------- [ 788.096716] WARNING: at net/core/dev.c:2253 skb_warn_bad_offload+0xcd/0xda() [ 788.129521] bnx2: caps=(0x00000001801949b3, 0x0000000000000000) len=2962 data_len=0 gso_size=1448 gso_type=1 ip_summed=3 [ 788.182150] Modules linked in: sch_netem kvm_amd kvm crc32_pclmul ipmi_ssif ghash_clmulni_intel sp5100_tco amd64_edac_mod aesni_intel lrw gf128mul glue_helper ablk_helper edac_mce_amd cryptd pcspkr sg edac_core hpilo ipmi_si i2c_piix4 k10temp fam15h_power hpwdt ipmi_msghandler shpchp acpi_power_meter pcc_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ahci ata_generic pata_acpi ttm libahci crct10dif_pclmul pata_atiixp tg3 libata crct10dif_common drm crc32c_intel ptp serio_raw bnx2 r8169 hpsa pps_core i2c_core mii dm_mirror dm_region_hash dm_log dm_mod [ 788.465294] CPU: 16 PID: 0 Comm: swapper/16 Tainted: G W ------------ 3.10.0-327.el7.x86_64 #1 [ 788.511521] Hardware name: HP ProLiant DL385p Gen8, BIOS A28 12/17/2012 [ 788.542260] ffff880437c036b8 f7afc56532a53db9 ffff880437c03670 ffffffff816351f1 [ 788.576332] ffff880437c036a8 ffffffff8107b200 ffff880633e74200 ffff880231674000 [ 788.611943] 0000000000000001 0000000000000003 0000000000000000 ffff880437c03710 [ 788.647241] Call Trace: [ 788.658817] <IRQ> [<ffffffff816351f1>] dump_stack+0x19/0x1b [ 788.686193] [<ffffffff8107b200>] warn_slowpath_common+0x70/0xb0 [ 788.713803] [<ffffffff8107b29c>] warn_slowpath_fmt+0x5c/0x80 [ 788.741314] [<ffffffff812f92f3>] ? ___ratelimit+0x93/0x100 [ 788.767018] [<ffffffff81637f49>] skb_warn_bad_offload+0xcd/0xda [ 788.796117] [<ffffffff8152950c>] skb_checksum_help+0x17c/0x190 [ 788.823392] [<ffffffffa01463a1>] netem_enqueue+0x741/0x7c0 [sch_netem] [ 788.854487] [<ffffffff8152cb58>] dev_queue_xmit+0x2a8/0x570 [ 788.880870] [<ffffffff8156ae1d>] ip_finish_output+0x53d/0x7d0 ... The problem occurs because netem is not prepared to handle GSO packets (as it uses skb_checksum_help in its enqueue path, which cannot manipulate these frames). The solution I think is to simply segment the skb in a simmilar fashion to the way we do in __dev_queue_xmit (via validate_xmit_skb), with some minor changes. When we decide to corrupt an skb, if the frame is GSO, we segment it, corrupt the first segment, and enqueue the remaining ones. tested successfully by myself on the latest net kernel, to which this applies Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> CC: "David S. Miller" <davem@davemloft.net> CC: netem@lists.linux-foundation.org CC: eric.dumazet@gmail.com CC: stephen@networkplumber.org Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 4月, 2016 2 次提交
-
-
由 Florian Westphal 提交于
No more users in the tree, remove NETDEV_TX_LOCKED support. Adds another hole in softnet_stats struct, but better than keeping the unused collision counter around. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 4月, 2016 3 次提交
-
-
由 Michal Kazior 提交于
It was impossible to include codel.h for the purpose of having access to codel_params or codel_vars structure definitions and using them for embedding in other more complex structures. This splits allows codel.h itself to be treated like any other header file while codel_qdisc.h and codel_impl.h contain function definitions with logic that was previously in codel.h. This copies over copyrights and doesn't involve code changes other than adding a few additional include directives to net/sched/sch*codel.c. Signed-off-by: NMichal Kazior <michal.kazior@tieto.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Kazior 提交于
This strips out qdisc specific bits from the code and makes it slightly more reusable. Codel will be used by wireless/mac80211 in the future. Signed-off-by: NMichal Kazior <michal.kazior@tieto.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 4月, 2016 2 次提交
-
-
由 Lars Persson 提交于
A failure in validate_xmit_skb_list() triggered an unconditional call to dev_requeue_skb with skb=NULL. This slowly grows the queue discipline's qlen count until all traffic through the queue stops. We take the optimistic approach and continue running the queue after a failure since it is unknown if later packets also will fail in the validate path. Fixes: 55a93b3e ("qdisc: validate skb without holding lock") Signed-off-by: NLars Persson <larper@axis.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
The meta_type_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 3月, 2016 1 次提交
-
-
由 Daniel Borkmann 提交于
There are two issues with the current code. First one is that we need to set res->class to 0 in case we use non-default classid matching. This is important for the case where cls_bpf was initially set up with an optional binding to a default class with tcf_bind_filter(), where the underlying qdisc implements bind_tcf() that fills res->class and tests for it later on when doing the classification. Convention for these cases is that after tc_classify() was called, such qdiscs (atm, drr, qfq, cbq, hfsc, htb) first test class, and if 0, then they lookup based on classid. Second, there's a bug with da mode, where res->classid is only assigned a 16 bit minor, but it needs to expand to the full 32 bit major/minor combination instead, therefore we need to expand with the bound major. This is fine as classes belonging to a classful qdisc must share the same major. Fixes: 045efa82 ("cls_bpf: introduce integrated actions") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 3月, 2016 1 次提交
-
-
由 Amir Vadai 提交于
Cast pointer to unsigned long instead of u64, to fix compilation warning on 32 bit arch, spotted by 0day build. Fixes: 5b33f488 ("net/flower: Introduce hardware offload support") Signed-off-by: NAmir Vadai <amir@vadai.me> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 3月, 2016 1 次提交
-
-
由 Amir Vadai 提交于
This patch is based on a patch made by John Fastabend. It adds support for offloading cls_flower. when NETIF_F_HW_TC is on: flags = 0 => Rule will be processed twice - by hardware, and if still relevant, by software. flags = SKIP_HW => Rull will be processed by software only If hardware fail/not capabale to apply the rule, operation will NOT fail. Filter will be processed by SW only. Acked-by: NJiri Pirko <jiri@mellanox.com> Suggested-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NAmir Vadai <amir@vadai.me> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 3月, 2016 1 次提交
-
-
由 Kyeong Yoo 提交于
This fix is for dsmark similar to commit 3557619f ("net_sched: prio: use qdisc_dequeue_peeked") and makes use of qdisc_dequeue_peeked() instead of direct dequeue() call. First time, wrr peeks dsmark, which will then peek into sfq. sfq dequeues an skb and it's stored in sch->gso_skb. Next time, wrr tries to dequeue from dsmark, which will call sfq dequeue directly. This results skipping the previously peeked skb. So changed dsmark dequeue to call qdisc_dequeue_peeked() instead to use peeked skb if exists. Signed-off-by: NKyeong Yoo <kyeong.yoo@alliedtelesis.co.nz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 3月, 2016 1 次提交
-
-
由 Phil Sutter 提交于
Before calling the destroy() or target() callbacks, the family parameter field has to be initialized. Otherwise at least the LOG target will refuse to work and upon removal oops the kernel. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NPhil Sutter <phil@nwl.cc> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-