According to drivers/video/intelfb/intelfb.h, the intelfb driver
supportes the following devices:
830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM. So the description in
drivers/video/Kconfig and the documentation in
Documentation/fb/intelfb.txt is outdated.

airlied: cleaned up some other obvious mistakes in intelfb.txt.
Signed-off-by: NChristian Merkle <mail@christian-merkle.de>
Signed-off-by: NDave Airlie <airlied@linux.ie>

Adds code to unregister the I2C buses in the cleanup function.
Signed-off-by: NDennis Munsie <dmunsie@cecropia.com>

[07/07] intelfb: adds an option to enable I2C support in the intelfb driver.  Also adds
the intel_i2c.c file to the Makefile.
Signed-off-by: NDennis Munsie <dmunsie@cecropia.com>

[06/07] intelfb: adds intelfb_i2c.c which contains the infrastructure needed to
enumerate the i2c busses on the intelfb.
Signed-off-by: NDennis Munsie <dmunsie@cecropia.com>

[05/07] intelfb: add output fields to dinfo.
Signed-off-by: NDennis Munsie <dmunsie@cecropia.com>

[04/07] intelfb: add intelfb_output_rec struct and the constants for it's
fields.
Signed-off-by: NDennis Munsie <dmunsie@cecropia.com>

[03/07] intelfb: add intelfb_i2c_chan struct.
Signed-off-by: NDennis Munsie <dmunsie@cecropia.com>

[02/07] intelfb: add GPIO registers.
Signed-off-by: NDennis Munsie <dmunsie@cecropia.com>

[01/07] i2c: add intelfb bit algorithm id

Adds the intelfb bit algorithm id to i2c-id.h.
Signed-off-by: NDennis Munsie <dmunsie@cecropia.com>

[05/05] intelfb: Honor FB_ACTIVATE_VBL for display panning

Extends the intelfb_vsync struct to store panning offset. The interrupt service routine uses the stored panning offset if a pan is requested for the vsync. intelfbhw_disable_irq also pans the display if there is a pending request.
Signed-off-by: NEric Hustvedt <ehustvedt@cecropia.com>

[04/05] intelfb: implement FBIO_WAITFORVSYNC ioctl

The (unofficial) FBIO_WAITFORVSYNC ioctl is implemented by sleeping on the appropriate waitqueue, as defined in my earlier patch. Currently, only display 0 (aka pipe A) is supported.
Signed-off-by: NEric Hustvedt <ehustvedt@cecropia.com>

[03/05] intelfb: Implement basic interrupt handling

Functions have been added to enable and disable interrupts using the MMIO registers. Currently only pipe A vsync interrupts are enabled.
A generalized vsync accounting struct is defined, with the intent that it can encapsulate per-pipe vsync related info in the future. Currently a single instance is hard-coded.
The interrupt service routine currently only looks for vsync interrupts on pipe A, and increments a counter and wakes up anyone waiting on it.

This implementation is heavily influenced by similar implementations in the atyfb and matroxfb drivers.
Signed-off-by: NEric Hustvedt <ehustvedt@cecropia.com>

[02/05] intelfb: Add interrupt related register definitions

Add constants for accessing HWSTAM, IER, IIR, and IMR registers.
Add constants for interrupt types supported by the 8xx and 9xx chipsets.
The registers are also stored in the hwstate struct and dumped in the debug routine.
Signed-off-by: NEric Hustvedt <ehustvedt@cecropia.com>

[01/05] intelfb: Add 16-bit register access macros

This patch adds macros to read and write two-byte MMIO registers. The interrupt-related registers are all word-sized, rather than long-sized.
Signed-off-by: NEric Hustvedt <ehustvedt@cecropia.com>

ring_head is offset in card memory, not iomem pointer.  Fixed, removed
fuckloads of amazingly bogus casts somebody had sprinkled all over the
place.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDave Airlie <airlied@linux.ie>

Prevent possible null dereference due to misplaced ;
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (258 commits)
  [libata] conversion to new debug scheme, part 1 of $N
  [PATCH] libata: Add ata_scsi_dev_disabled
  [libata] Add host lock to struct ata_port
  [PATCH] libata: implement per-dev EH action mask eh_info->dev_action[]
  [PATCH] libata-dev: move the CDB-intr DMA blacklisting
  [PATCH] ahci: disable NCQ support on vt8251
  [libata] ahci: add JMicron PCI IDs
  [libata] sata_nv: add PCI IDs
  [libata] ahci: Add NVIDIA PCI IDs.
  [PATCH] libata: convert several bmdma-style controllers to new EH, take #3
  [PATCH] sata_via: convert to new EH, take #3
  [libata] sata_nv: s/spin_lock_irqsave/spin_lock/ in irq handler
  [PATCH] sata_nv: add hotplug support
  [PATCH] sata_nv: convert to new EH
  [PATCH] sata_nv: better irq handlers
  [PATCH] sata_nv: simplify constants
  [PATCH] sata_nv: kill struct nv_host_desc and nv_host
  [PATCH] sata_nv: kill not-working hotplug code
  [libata] Update docs to reflect current driver API
  [PATCH] libata: add host_set->next for legacy two host_sets case, take #3
  ...

arch/ia64/kernel/acpi.c got forgotten when include/acpi/actbl.h
got a cleanup.
Signed-off-by: NTony Luck <tony.luck@intel.com>

My bad.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update hypfs for dhowells API changes.

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Ingo Oeser <ioe-lkml@rameria.de>
Cc: Joern Engel <joern@wohnheim.fh-wedel.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

drivers/cpufreq/cpufreq_ondemand.c: In function 'do_dbs_timer':
drivers/cpufreq/cpufreq_ondemand.c:374: warning: implicit declaration of function 'lock_cpu_hotplug'
drivers/cpufreq/cpufreq_ondemand.c:381: warning: implicit declaration of function 'unlock_cpu_hotplug'
drivers/cpufreq/cpufreq_conservative.c: In function 'do_dbs_timer':
drivers/cpufreq/cpufreq_conservative.c:425: warning: implicit declaration of function 'lock_cpu_hotplug'
drivers/cpufreq/cpufreq_conservative.c:432: warning: implicit declaration of function 'unlock_cpu_hotplug'

Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Do a safer check for when to enable DMA. Currently we enable ISA DMA
for cases that do not need it, resulting in OOM conditions when ZONE_DMA
runs out of space.
Signed-off-by: NJens Axboe <axboe@suse.de>

They all duplicate macros to check for empty root and/or node, and
clearing a node. So put those in rbtree.h.
Signed-off-by: NJens Axboe <axboe@suse.de>

Otherwise we could be racing with truncate/mapping removal.

Problem found/fixed by Nick Piggin <npiggin@suse.de>, logic rewritten
by me.
Signed-off-by: NJens Axboe <axboe@suse.de>

- Remember to set ->last_sector so that the cfq_choose_req() logic
  works correctly.

- Remove redundant call to cfq_choose_req()
Signed-off-by: NJens Axboe <axboe@suse.de>

This is a collection of patches that greatly improve CFQ performance
in some circumstances.

- Change the idling logic to only kick in after a request is done and we
  are deciding what to do. Before the idling included the request service
  time, so it was hard to adjust. Now it's true think/idle time.

- Take advantage of TCQ/NCQ/queueing for seeky sync workloads, but keep
  it in control for sync and sequential (or close to) workloads.

- Expire queues immediately and move on to other busy queues, if we are
  not going to idle after the current one finishes.

- Don't rearm idle timer if there are no busy queues. Just leave the
  system idle.
Signed-off-by: NJens Axboe <axboe@suse.de>

Patch originally from Vasily Tarasov <vtaras@sw.ru>

If you set io-priority of process 1 using sys_ioprio_set system call by
another process 2 (like ionice do), then cfq_init_prio_data() function
sets priority of process 2 (current) on queue of process 1 and clears
the flag, that designates change of ioprio.  So the process  1 will work
like with priority of process 2.

I propose not to call cfq_init_prio_data() on io-priority change, but
only mark queue as queue with changed prority.  Every time when new
request comes cfq-scheduler checks for this flag and atomaticaly changes
priority of queue to new value.
Signed-off-by: NJens Axboe <axboe@suse.de>

Signed-off-by: NJens Axboe <axboe@suse.de>

This saves 8 bytes of data in 64-bit archs.
Signed-off-by: NJens Axboe <axboe@suse.de>

The IDE power management can just use the ->end_io_data member to store
it's data.
Signed-off-by: NJens Axboe <axboe@suse.de>

A process flag to indicate whether we are doing sync io is incredibly
ugly. It also causes performance problems when one does a lot of async
io and then proceeds to sync it. Part of the io will go out as async,
and the other part as sync. This causes a disconnect between the
previously submitted io and the synced io. For io schedulers such as CFQ,
this will cause us lost merges and suboptimal behaviour in scheduling.

Remove PF_SYNCWRITE completely from the fsync/msync paths, and let
the O_DIRECT path just directly indicate that the writes are sync
by using WRITE_SYNC instead.
Signed-off-by: NJens Axboe <axboe@suse.de>

We cannot update them if the user changes nr_requests, so don't
set it in the first place. The gains are pretty questionable as
well. The batching loss has been shown to decrease throughput.
Signed-off-by: NJens Axboe <axboe@suse.de>

We already drop the refcount in elevator_exit(), and as
we're setting 'e' to NULL, we'll never take that branch anyway.
Finally, as 'e' is a local var that isn't referenced afterwards,
setting it to NULL is pointless.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NJens Axboe <axboe@suse.de>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJens Axboe <axboe@suse.de>

The queue lock can be taken from interrupts so it must always be taken with
irq disabling primitives.  Some primitives already verify this.
blk_start_queue() is called under this lock, so interrupts must be
disabled.

Also document this requirement clearly in blk_init_queue(), where the queue
spinlock is set.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJens Axboe <axboe@suse.de>

Use hlist instead of list_head for request hashtable in deadline-iosched
and as-iosched. It also can remove the flag to know hashed or unhashed.
Signed-off-by: NAkinobu Mita <mita@miraclelinux.com>
Signed-off-by: NJens Axboe <axboe@suse.de>

 block/as-iosched.c       |   45 +++++++++++++++++++--------------------------
 block/deadline-iosched.c |   39 ++++++++++++++++-----------------------
 2 files changed, 35 insertions(+), 49 deletions(-)

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NET]: Require CAP_NET_ADMIN to create tuntap devices.
  [NET]: fix net-core kernel-doc
  [TCP]: Move inclusion of <linux/dmaengine.h> to correct place in <linux/tcp.h>
  [IPSEC]: Handle GSO packets
  [NET]: Added GSO toggle
  [NET]: Add software TSOv4
  [NET]: Add generic segmentation offload
  [NET]: Merge TSO/UFO fields in sk_buff
  [NET]: Prevent transmission after dev_deactivate
  [IPV6] ADDRCONF: Fix default source address selection without CONFIG_IPV6_PRIVACY
  [IPV6]: Fix source address selection.
  [NET]: Avoid allocating skb in skb_pad

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (65 commits)
  ACPI: suppress power button event on S3 resume
  ACPI: resolve merge conflict between sem2mutex and processor_perflib.c
  ACPI: use for_each_possible_cpu() instead of for_each_cpu()
  ACPI: delete newly added debugging macros in processor_perflib.c
  ACPI: UP build fix for bugzilla-5737
  Enable P-state software coordination via _PDC
  P-state software coordination for speedstep-centrino
  P-state software coordination for acpi-cpufreq
  P-state software coordination for ACPI core
  ACPI: create acpi_thermal_resume()
  ACPI: create acpi_fan_suspend()/acpi_fan_resume()
  ACPI: pass pm_message_t from acpi_device_suspend() to root_suspend()
  ACPI: create acpi_device_suspend()/acpi_device_resume()
  ACPI: replace spin_lock_irq with mutex for ec poll mode
  ACPI: Allow a WAN module enable/disable on a Thinkpad X60.
  sem2mutex: acpi, acpi_link_lock
  ACPI: delete unused acpi_bus_drivers_lock
  sem2mutex: drivers/acpi/processor_perflib.c
  ACPI add ia64 exports to build acpi_memhotplug as a module
  ACPI: asus_acpi_init(): propagate correct return value
  ...

Manual resolve of conflicts in:

	arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
	arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
	include/acpi/processor.h

Update the sparse documentation to omit the -Wbitwise flag example (as it
is now passed by default), and document the kernel defines to enable
endianness checking.
Signed-off-by: NBob Copeland <me@bobcopeland.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>