- 10 1月, 2011 1 次提交
-
-
由 Jeff Layton 提交于
We call CIFSSMBUnixSetPathInfo in these functions, but we have a filehandle since an open was just done. Switch these functions to use CIFSSMBUnixSetFileInfo instead. In practice, these codepaths are only used if posix opens are broken. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 07 1月, 2011 2 次提交
-
-
由 Pavel Shilovsky 提交于
Make the code more general for use in posix and non-posix open. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Pavel Shilovsky 提交于
Delete cifs_open_inode_helper and move non-posix open related things to cifs_nt_open function. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 07 12月, 2010 1 次提交
-
-
由 Jeff Layton 提交于
Some of the code under CONFIG_CIFS_ACL is dependent upon code under CONFIG_CIFS_EXPERIMENTAL, but the Kconfig options don't reflect that dependency. Move more of the ACL code out from under CONFIG_CIFS_EXPERIMENTAL and under CONFIG_CIFS_ACL. Also move find_readable_file out from other any sort of Kconfig option and make it a function normally compiled in. Reported-and-Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 10 11月, 2010 1 次提交
-
-
由 Jeff Layton 提交于
cfile may very well be freed after the cifsFileInfo_put. Make sure we have a valid pointer to the superblock for cifs_sb_deactive. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 06 11月, 2010 1 次提交
-
-
由 Pavel Shilovsky 提交于
All the callers already have a pointer to struct cifsInodeInfo. Use it. Signed-off-by: NSuresh Jayaraman <sjayaraman@suse.de> Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 05 11月, 2010 1 次提交
-
-
由 Jeff Layton 提交于
This patch is based on Dan's original patch. His original description is below: Smatch complained about a couple checking for NULL after dereferencing bugs. I'm not super familiar with the code so I did the conservative thing and move the dereferences after the checks. The dereferences in cifs_lock() and cifs_fsync() were added in ba00ba64 "cifs: make various routines use the cifsFileInfo->tcon pointer". The dereference in find_writable_file() was added in 6508d904 "cifs: have find_readable/writable_file filter by fsuid". The comments there say it's possible to trigger the NULL dereference under stress. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 03 11月, 2010 2 次提交
-
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Pavel Shilovsky 提交于
Simplify many places when we need to set oplock level on an inode. Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 02 11月, 2010 1 次提交
-
-
由 Jiri Slaby 提交于
Stanse found that pSMBFile in cifs_ioctl and file->f_path.dentry in cifs_user_write are dereferenced prior their test to NULL. The alternative is not to dereference them before the tests. The patch is to point out the problem, you have to decide. While at it we cache the inode in cifs_user_write to a local variable and use all over the function. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Steve French <sfrench@samba.org> Cc: linux-cifs@vger.kernel.org Cc: Jeff Layton <jlayton@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 28 10月, 2010 1 次提交
-
-
由 Dan Carpenter 提交于
We leak 256 bytes here on this error path. Signed-off-by: NDan Carpenter <error27@gmail.com> Acked-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 27 10月, 2010 1 次提交
-
-
由 Wu Fengguang 提交于
This removes more dead code that was somehow missed by commit 0d99519e (writeback: remove unused nonblocking and congestion checks). There are no behavior change except for the removal of two entries from one of the ext4 tracing interface. The nonblocking checks in ->writepages are no longer used because the flusher now prefer to block on get_request_wait() than to skip inodes on IO congestion. The latter will lead to more seeky IO. The nonblocking checks in ->writepage are no longer used because it's redundant with the WB_SYNC_NONE check. We no long set ->nonblocking in VM page out and page migration, because a) it's effectively redundant with WB_SYNC_NONE in current code b) it's old semantic of "Don't get stuck on request queues" is mis-behavior: that would skip some dirty inodes on congestion and page out others, which is unfair in terms of LRU age. Inspired by Christoph Hellwig. Thanks! Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: David Howells <dhowells@redhat.com> Cc: Sage Weil <sage@newdream.net> Cc: Steve French <sfrench@samba.org> Cc: Chris Mason <chris.mason@oracle.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 10月, 2010 4 次提交
-
-
由 Suresh Jayaraman 提交于
GlobalSMBSesLock is now cifs_file_list_lock. Update comments to reflect this. Signed-off-by: NSuresh Jayaraman <sjayaraman@suse.de> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
write_behind_rc is redundant and just adds complexity to the code. What we really want to do instead is to use mapping_set_error to reset the flags on the mapping when we find a writeback error and can't report it to userspace yet. For cifs_flush and cifs_fsync, we shouldn't reset the flags since errors returned there do get reported to userspace. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.de> Reviewed-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
The f_op->flush operation is the last chance to return a writeback related error when closing a file. Ensure that we don't miss reporting any errors by waiting for writeback to complete in cifs_flush before proceeding. There's no reason to do this when the file isn't open for write however. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.de> Reviewed-by: NDavid Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
The count for cifsFileInfo is currently an atomic, but that just adds complexity for little value. We generally need to hold cifs_file_list_lock to traverse the lists anyway so we might as well make this counter non-atomic and simply use the cifs_file_list_lock to protect it. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.de> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 22 10月, 2010 1 次提交
-
-
由 Steve French 提交于
Now that it's feasible for a cifsFileInfo to outlive the filp under which it was created, move the close processing into cifsFileInfo_put. This means that the last user of the filehandle always does the actual on the wire close call. This also allows us to get rid of the closePend flag from cifsFileInfo. If we have an active reference to the file then it's never going to have a close pending. cifs_close is converted to simply put the filehandle. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.de> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 18 10月, 2010 9 次提交
-
-
由 Jeff Layton 提交于
...and make it non-inlined in preparation for the move of most of cifs_close to it. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.de> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
Convert this lock to a regular spinlock A rwlock_t offers little value here. It's more expensive than a regular spinlock unless you have a fairly large section of code that runs under the read lock and can benefit from the concurrency. Additionally, we need to ensure that the refcounting for files isn't racy and to do that we need to lock areas that can increment it for write. That means that the areas that can actually use a read_lock are very few and relatively infrequently used. While we're at it, change the name to something easier to type, and fix a bug in find_writable_file. cifsFileInfo_put can sleep and shouldn't be called while holding the lock. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.de> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
It's currently in dir.c which makes little sense... Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.de> Acked-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
All the remaining users of cifsFileInfo->pfile just use it to get at the f_flags/f_mode. Now that we store that separately in the cifsFileInfo, there's no need to consult the pfile at all from a cifsFileInfo pointer. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.de> Acked-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
Have cifs_write take a cifsFileInfo pointer instead of a filp. Since cifsFileInfo holds references on the dentry, and that holds one to the inode, we can eliminate some unneeded NULL pointer checks. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.de> Acked-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
Add a f_flags field that holds the f_flags field from the filp. We'll need this info in case the filp ever goes away before the cifsFileInfo does. Have cifs_reopen_file use that value instead of filp->f_flags too and have it take a cifsFileInfo arg instead of a filp. While we're at it, get rid of some bogus cargo-cult NULL pointer checks in that function and reduce the level of indentation. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.de> Acked-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
It already takes a file pointer. The inode associated with that had damn well better be the same one we're passing in anyway. Thus, there's no need for a separate argument here. Also, get rid of the bogus check for a null pCifsInode pointer. The CIFS_I macro uses container_of(), and that will virtually never return a NULL pointer anyway. Finally, move the setting of the canCache* flags outside of the lock. Other places in the code don't hold that lock when setting it, so I assume it's not really needed here either. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.de> Acked-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
Eliminate the poor, misunderstood "oflags" option from cifs_new_fileinfo. The callers mostly pass in the filp->f_flags here. That's not correct however since we're checking that value for the presence of FMODE_READ. Luckily that only affects how the f_list is ordered. What it really wants here is the file->f_mode. Just use that field from the filp to determine it. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.de> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
The way flags are passed and converted for cifs_posix_open is rather non-sensical. Some callers call cifs_posix_convert_flags on the flags before they pass them to cifs_posix_open, whereas some don't. Two flag conversion steps is just confusing though. Change the function instead to clearly expect input in f_flags format, and fix the callers to pass that in. Then, have cifs_posix_open call cifs_convert_posix_flags to do the conversion. Move cifs_posix_open to file.c as well so we can keep cifs_convert_posix_flags as a static function. Fix it also to not ignore O_CREAT, O_EXCL and O_TRUNC, and instead have cifs_reopen_file mask those bits off before calling cifs_posix_open. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.de> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 16 10月, 2010 1 次提交
-
-
由 Jeff Layton 提交于
cifs: eliminate cifs_posix_open_inode_helper This function is redundant. The only thing it does is set the canCache flags, but those get set in cifs_new_fileinfo anyway. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.de> Acked-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 13 10月, 2010 2 次提交
-
-
由 Jeff Layton 提交于
Filesystems aren't really supposed to do anything with a vfsmount. It's considered a layering violation since vfsmounts are entirely managed at the VFS layer. CIFS currently keeps an active reference to a vfsmount in order to prevent the superblock vanishing before an oplock break has completed. What we really want to do instead is to keep sb->s_active high until the oplock break has completed. This patch borrows the scheme that NFS uses for handling sillyrenames. An atomic_t is added to the cifs_sb_info. When it transitions from 0 to 1, an extra reference to the superblock is taken (by bumping the s_active value). When it transitions from 1 to 0, that reference is dropped and a the superblock teardown may proceed if there are no more references to it. Also, the vfsmount pointer is removed from cifsFileInfo and from cifs_new_fileinfo, and some bogus forward declarations are removed from cifsfs.h. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.de> Acked-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
cifsFileInfo is a bit problematic. It contains a reference back to the struct file itself. This makes it difficult for a cifsFileInfo to exist without a corresponding struct file. It would be better instead of the cifsFileInfo just held info pertaining to the open file on the server instead without any back refrences to the struct file. This would allow it to exist after the filp to which it was originally attached was closed. Much of the use of the file pointer in this struct is to get at the dentry. Begin divorcing the cifsFileInfo from the struct file by keeping a reference to the dentry. Since the dentry will have a reference to the inode, we can eliminate the "pInode" field too and convert the igrab/iput to dget/dput. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.de> Acked-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 07 10月, 2010 3 次提交
-
-
由 Jeff Layton 提交于
When we implement multiuser mounts, we'll need to filter filehandles by fsuid. Add a flag for multiuser mounts and code to filter by fsuid when it's set. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
cifsFileInfo needs a pointer to a tcon, but it doesn't currently hold a reference to it. Change it to keep a pointer to a tcon_link instead and hold a reference to it. That will keep the tcon from being freed until the file is closed. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
Eventually, we'll need to track the use of tcons on a per-sb basis, so that we know when it's ok to tear them down. Begin this conversion by adding a new "tcon_link" struct and accessors that get it. For now, the core data structures are untouched -- cifs_sb still just points to a single tcon and the pointers are just cast to deal with the accessor functions. A later patch will flesh this out. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 30 9月, 2010 6 次提交
-
-
由 Jeff Layton 提交于
Get a reference to the file early so we can eventually base the decision about signing on the correct tcon. If that doesn't work for some reason, then fall back to generic_writepages. That's just as likely to fail, but it simplifies the error handling. In truth, I'm not sure how that could occur anyway, so maybe a NULL open_file here ought to be a BUG()? After that, we drop the reference to the open_file and then we re-get one prior to each WriteAndX call. This helps ensure that the filehandle isn't held open any longer than necessary and that open files are reclaimed prior to each write call. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
To minimize calls to cifs_sb_tcon and to allow for a clear error path if a tcon can't be acquired. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
When we convert cifs to do multiple sessions per mount, we'll need more than one tcon per superblock. At that point "cifs_sb->tcon" will make no sense. Add a new accessor function that gets a tcon given a cifs_sb. For now, it just returns cifs_sb->tcon. Later it'll do more. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
...where it's available and appropriate. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Suresh Jayaraman 提交于
cifs_new_fileinfo() does not use the 'oplock' value from the callers. Instead, it sets it to REQ_OPLOCK which seems wrong. We should be using the oplock value obtained from the Server to set the inode's clientCanCacheAll or clientCanCacheRead flags. Fix this by passing oplock from the callers to cifs_new_fileinfo(). This change dates back to commit a6ce4932 (2.6.30-rc3). So, all the affected versions will need this fix. Please Cc stable once reviewed and accepted. Cc: Stable <stable@kernel.org> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSuresh Jayaraman <sjayaraman@suse.de> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Suresh Jayaraman 提交于
... and avoid implicit casting from a signed type. Also, pass oplock by value instead by reference as we don't intend to change the value in cifs_open_inode_helper(). Thanks to Jeff Layton for spotting this. Reviewed-by: NJeff Layton <jlayton@samba.org> Signed-off-by: NSuresh Jayaraman <sjayaraman@suse.de> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 17 8月, 2010 1 次提交
-
-
由 Jeff Layton 提交于
cifs has a lot of complicated functions that have to clean up things on error, but some of them don't have all of the cleanup code well-consolidated. Clean up and consolidate error handling in several functions. This is in preparation of later patches that will need to put references to the tcon link container. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 02 8月, 2010 1 次提交
-
-
由 Suresh Jayaraman 提交于
Read pages from a FS-Cache data storage object into a CIFS inode. Signed-off-by: NSuresh Jayaraman <sjayaraman@suse.de> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-