When we call btrfs_commit_transaction(), we splice the list "ordered"
of our transaction handle into the transaction's "pending_ordered"
list, but we don't re-initialize the "ordered" list of our transaction
handle, this means it still points to the same elements it used to
before the splice. Then we check if the current transaction's state is
>= TRANS_STATE_COMMIT_START and if it is we end up calling
btrfs_end_transaction() which simply splices again the "ordered" list
of our handle into the transaction's "pending_ordered" list, leaving
multiple pointers to the same ordered extents which results in list
corruption when we are iterating, removing and freeing ordered extents
at btrfs_wait_pending_ordered(), resulting in access to dangling
pointers / use-after-free issues.
Similarly, btrfs_end_transaction() can end up in some cases calling
btrfs_commit_transaction(), and both did a list splice of the transaction
handle's "ordered" list into the transaction's "pending_ordered" without
re-initializing the handle's "ordered" list, resulting in exactly the
same problem.

This produces the following warning on a kernel with linked list
debugging enabled:

[109749.265416] ------------[ cut here ]------------
[109749.266410] WARNING: CPU: 7 PID: 324 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98()
[109749.267969] list_del corruption. prev->next should be ffff8800ba087e20, but was fffffff8c1f7c35d
(...)
[109749.287505] Call Trace:
[109749.288135]  [<ffffffff8145f077>] dump_stack+0x4f/0x7b
[109749.298080]  [<ffffffff81095de5>] ? console_unlock+0x356/0x3a2
[109749.331605]  [<ffffffff8104b3b0>] warn_slowpath_common+0xa1/0xbb
[109749.334849]  [<ffffffff81260642>] ? __list_del_entry+0x5a/0x98
[109749.337093]  [<ffffffff8104b410>] warn_slowpath_fmt+0x46/0x48
[109749.337847]  [<ffffffff81260642>] __list_del_entry+0x5a/0x98
[109749.338678]  [<ffffffffa053e8bf>] btrfs_wait_pending_ordered+0x46/0xdb [btrfs]
[109749.340145]  [<ffffffffa058a65f>] ? __btrfs_run_delayed_items+0x149/0x163 [btrfs]
[109749.348313]  [<ffffffffa054077d>] btrfs_commit_transaction+0x36b/0xa10 [btrfs]
[109749.349745]  [<ffffffff81087310>] ? trace_hardirqs_on+0xd/0xf
[109749.350819]  [<ffffffffa055370d>] btrfs_sync_file+0x36f/0x3fc [btrfs]
[109749.351976]  [<ffffffff8118ec98>] vfs_fsync_range+0x8f/0x9e
[109749.360341]  [<ffffffff8118ecc3>] vfs_fsync+0x1c/0x1e
[109749.368828]  [<ffffffff8118ee1d>] do_fsync+0x34/0x4e
[109749.369790]  [<ffffffff8118f045>] SyS_fsync+0x10/0x14
[109749.370925]  [<ffffffff81465197>] system_call_fastpath+0x12/0x6f
[109749.382274] ---[ end trace 48e0d07f7c03d95a ]---

On a non-debug kernel this leads to invalid memory accesses, causing a
crash. Fix this by using list_splice_init() instead of list_splice() in
btrfs_commit_transaction() and btrfs_end_transaction().

Cc: stable@vger.kernel.org
Fixes: 50d9aa99 ("Btrfs: make sure logged extents complete in the current transaction V3"
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>

We were allocating memory with memdup_user() but we were never releasing
that memory. This affected pretty much every call to the ioctl, whether
it deduplicated extents or not.

This issue was reported on IRC by Julian Taylor and on the mailing list
by Marcel Ritter, credit goes to them for finding the issue.
Reported-by: NJulian Taylor <jtaylor.debian@googlemail.com>
Reported-by: NMarcel Ritter <ritter.marcel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>

If the no_holes feature is enabled, we attempt to shrink a file to a size
that ends up in the middle of a hole and we don't have any file extent
items in the fs/subvol tree that go beyond the new file size (or any
ordered extents that will insert such file extent items), we end up not
updating the inode's disk_i_size, we only update the inode's i_size.

This means that after unmounting and mounting the filesystem, or after
the inode is evicted and reloaded, its i_size ends up being incorrect
(an inode's i_size is set to the disk_i_size field when an inode is
loaded). This happens when btrfs_truncate_inode_items() doesn't find
any file extent items to drop - in this case it never makes a call to
btrfs_ordered_update_i_size() in order to update the inode's disk_i_size.

Example reproducer:

  $ mkfs.btrfs -O no-holes -f /dev/sdd
  $ mount /dev/sdd /mnt

  # Create our test file with some data and durably persist it.
  $ xfs_io -f -c "pwrite -S 0xaa 0 128K" /mnt/foo
  $ sync

  # Append some data to the file, increasing its size, and leave a hole
  # between the old size and the start offset if the following write. So
  # our file gets a hole in the range [128Kb, 256Kb[.
  $ xfs_io -c "truncate 160K" /mnt/foo

  # We expect to see our file with a size of 160Kb, with the first 128Kb
  # of data all having the value 0xaa and the remaining 32Kb of data all
  # having the value 0x00.
  $ od -t x1 /mnt/foo
  0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
  *
  0400000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  0500000

  # Now cleanly unmount and mount again the filesystem.
  $ umount /mnt
  $ mount /dev/sdd /mnt

  # We expect to get the same result as before, a file with a size of
  # 160Kb, with the first 128Kb of data all having the value 0xaa and the
  # remaining 32Kb of data all having the value 0x00.
  $ od -t x1 /mnt/foo
  0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
  *
  0400000

In the example above the file size/data do not match what they were before
the remount.

Fix this by always calling btrfs_ordered_update_i_size() with a size
matching the size the file was truncated to if btrfs_truncate_inode_items()
is not called for a log tree and no file extent items were dropped. This
ensures the same behaviour as when the no_holes feature is not enabled.

A test case for fstests follows soon.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>

btrfs_force_chunk_alloc() return 1 for allocation chunk successfully.
This problem exists since commit c87f08ca.

With this patch, we might fix some enospc problems for balances.
Signed-off-by: NWang Shilong <wangshilong1991@gmail.com>
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Tested-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

While running generic/019, dmesg got several warnings from
btrfs_free_reserved_data_space().

Test generic/019 produces some disk failures so sumbit dio will get errors,
in which case, btrfs_direct_IO() goes to the error handling and free
bytes_may_use, but the problem is that bytes_may_use has been free'd
during get_block().

This adds a runtime flag to show if we've gone through get_block(), if so,
don't do the cleanup work.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Tested-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

The hang is uncoverd by generic/019.

btrfs_endio_direct_write() skips the "finish_ordered_fn" part when it hits
an error, thus those added ordered extents will never get processed, which
block processes that waiting for them via btrfs_start_ordered_extent().

This fixes the above, and meanwhile finish_ordered_fn will do the space
accounting work.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Tested-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

The comment was not correct about the part where it says the endio
callback of the bio might have not yet been called - update it
to mention that by that time the endio callback execution might
still be in progress only.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

If we fail to submit a bio for a direct IO request, we were grabbing the
corresponding ordered extent and decrementing its reference count twice,
once for our lookup reference and once for the ordered tree reference.
This was a problem because it caused the ordered extent to be freed
without removing it from the ordered tree and any lists it might be
attached to, leaving dangling pointers to the ordered extent around.
Example trace with CONFIG_DEBUG_PAGEALLOC=y:

[161779.858707] BUG: unable to handle kernel paging request at 0000000087654330
[161779.859983] IP: [<ffffffff8124ca68>] rb_prev+0x22/0x3b
[161779.860636] PGD 34d818067 PUD 0
[161779.860636] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
(...)
[161779.860636] Call Trace:
[161779.860636]  [<ffffffffa06b36a6>] __tree_search+0xd9/0xf9 [btrfs]
[161779.860636]  [<ffffffffa06b3708>] tree_search+0x42/0x63 [btrfs]
[161779.860636]  [<ffffffffa06b4868>] ? btrfs_lookup_ordered_range+0x2d/0xa5 [btrfs]
[161779.860636]  [<ffffffffa06b4873>] btrfs_lookup_ordered_range+0x38/0xa5 [btrfs]
[161779.860636]  [<ffffffffa06aab8e>] btrfs_get_blocks_direct+0x11b/0x615 [btrfs]
[161779.860636]  [<ffffffff8119727f>] do_blockdev_direct_IO+0x5ff/0xb43
[161779.860636]  [<ffffffffa06aaa73>] ? btrfs_page_exists_in_range+0x1ad/0x1ad [btrfs]
[161779.860636]  [<ffffffffa06a2c9a>] ? btrfs_get_extent_fiemap+0x1bc/0x1bc [btrfs]
[161779.860636]  [<ffffffff811977f5>] __blockdev_direct_IO+0x32/0x34
[161779.860636]  [<ffffffffa06a2c9a>] ? btrfs_get_extent_fiemap+0x1bc/0x1bc [btrfs]
[161779.860636]  [<ffffffffa06a10ae>] btrfs_direct_IO+0x198/0x21f [btrfs]
[161779.860636]  [<ffffffffa06a2c9a>] ? btrfs_get_extent_fiemap+0x1bc/0x1bc [btrfs]
[161779.860636]  [<ffffffff81112ca1>] generic_file_direct_write+0xb3/0x128
[161779.860636]  [<ffffffffa06affaa>] ? btrfs_file_write_iter+0x15f/0x3e0 [btrfs]
[161779.860636]  [<ffffffffa06b004c>] btrfs_file_write_iter+0x201/0x3e0 [btrfs]
(...)

We were also not freeing the btrfs_dio_private we allocated previously,
which kmemleak reported with the following trace in its sysfs file:

unreferenced object 0xffff8803f553bf80 (size 96):
  comm "xfs_io", pid 4501, jiffies 4295039588 (age 173.936s)
  hex dump (first 32 bytes):
    88 6c 9b f5 02 88 ff ff 00 00 00 00 00 00 00 00  .l..............
    00 00 00 00 00 00 00 00 00 00 c4 00 00 00 00 00  ................
  backtrace:
    [<ffffffff81161ffe>] create_object+0x172/0x29a
    [<ffffffff8145870f>] kmemleak_alloc+0x25/0x41
    [<ffffffff81154e64>] kmemleak_alloc_recursive.constprop.40+0x16/0x18
    [<ffffffff811579ed>] kmem_cache_alloc_trace+0xfb/0x148
    [<ffffffffa03d8cff>] btrfs_submit_direct+0x65/0x16a [btrfs]
    [<ffffffff811968dc>] dio_bio_submit+0x62/0x8f
    [<ffffffff811975fe>] do_blockdev_direct_IO+0x97e/0xb43
    [<ffffffff811977f5>] __blockdev_direct_IO+0x32/0x34
    [<ffffffffa03d70ae>] btrfs_direct_IO+0x198/0x21f [btrfs]
    [<ffffffff81112ca1>] generic_file_direct_write+0xb3/0x128
    [<ffffffffa03e604d>] btrfs_file_write_iter+0x201/0x3e0 [btrfs]
    [<ffffffff8116586a>] __vfs_write+0x7c/0xa5
    [<ffffffff81165da9>] vfs_write+0xa0/0xe4
    [<ffffffff81166675>] SyS_pwrite64+0x64/0x82
    [<ffffffff81464fd7>] system_call_fastpath+0x12/0x6f
    [<ffffffffffffffff>] 0xffffffffffffffff

For read requests we weren't doing any cleanup either (none of the work
done by btrfs_endio_direct_read()), so a failure submitting a bio for a
read request would leave a range in the inode's io_tree locked forever,
blocking any future operations (both reads and writes) against that range.

So fix this by making sure we do the same cleanup that we do for the case
where the bio submission succeeds.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

One issue users have reported is that dedupe changes mtime on files,
resulting in tools like rsync thinking that their contents have changed when
in fact the data is exactly the same. We also skip the ctime update as no
user-visible metadata changes here and we want dedupe to be transparent to
the user.

Clone still wants time changes, so we special case this in the code.

This was tested with the btrfs-extent-same tool.
Signed-off-by: NMark Fasheh <mfasheh@suse.de>
Signed-off-by: NChris Mason <clm@fb.com>

clone() supports cloning within an inode so extent-same can do
the same now. This patch fixes up the locking in extent-same to
know about the single-inode case. In addition to that, we add a
check for overlapping ranges, which clone does not allow.
Signed-off-by: NMark Fasheh <mfasheh@suse.de>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

->readpage() does page_lock() before extent_lock(), we do the opposite in
extent-same. We want to reverse the order in btrfs_extent_same() but it's
not quite straightforward since the page locks are taken inside btrfs_cmp_data().

So I split btrfs_cmp_data() into 3 parts with a small context structure that
is passed between them. The first, btrfs_cmp_data_prepare() gathers up the
pages needed (taking page lock as required) and puts them on our context
structure. At this point, we are safe to lock the extent range. Afterwards,
we use btrfs_cmp_data() to do the data compare as usual and btrfs_cmp_data_free()
to clean up our context.
Signed-off-by: NMark Fasheh <mfasheh@suse.de>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

In the case that we dedupe the tail of a file, we might expand the dedupe
len out to the end of our last block. We don't want to compare data past
i_size however, so pass the original length to btrfs_cmp_data().
Signed-off-by: NMark Fasheh <mfasheh@suse.de>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

When we have the no_holes feature enabled, if a we truncate a file to a
smaller size, truncate it again but to a size greater than or equals to
its original size and fsync it, the log tree will not have any information
about the hole covering the range [truncate_1_offset, new_file_size[.
Which means if the fsync log is replayed, the file will remain with the
state it had before both truncate operations.

Without the no_holes feature this does not happen, since when the inode
is logged (full sync flag is set) it will find in the fs/subvol tree a
leaf with a generation matching the current transaction id that has an
explicit extent item representing the hole.

Fix this by adding an explicit extent item representing a hole between
the last extent and the inode's i_size if we are doing a full sync.

The issue is easy to reproduce with the following test case for fstests:

  . ./common/rc
  . ./common/filter
  . ./common/dmflakey

  _need_to_be_root
  _supported_fs generic
  _supported_os Linux
  _require_scratch
  _require_dm_flakey

  # This test was motivated by an issue found in btrfs when the btrfs
  # no-holes feature is enabled (introduced in kernel 3.14). So enable
  # the feature if the fs being tested is btrfs.
  if [ $FSTYP == "btrfs" ]; then
      _require_btrfs_fs_feature "no_holes"
      _require_btrfs_mkfs_feature "no-holes"
      MKFS_OPTIONS="$MKFS_OPTIONS -O no-holes"
  fi

  rm -f $seqres.full

  _scratch_mkfs >>$seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create our test files and make sure everything is durably persisted.
  $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 64K"         \
                  -c "pwrite -S 0xbb 64K 61K"       \
                  $SCRATCH_MNT/foo | _filter_xfs_io
  $XFS_IO_PROG -f -c "pwrite -S 0xee 0 64K"         \
                  -c "pwrite -S 0xff 64K 61K"       \
                  $SCRATCH_MNT/bar | _filter_xfs_io
  sync

  # Now truncate our file foo to a smaller size (64Kb) and then truncate
  # it to the size it had before the shrinking truncate (125Kb). Then
  # fsync our file. If a power failure happens after the fsync, we expect
  # our file to have a size of 125Kb, with the first 64Kb of data having
  # the value 0xaa and the second 61Kb of data having the value 0x00.
  $XFS_IO_PROG -c "truncate 64K" \
               -c "truncate 125K" \
               -c "fsync" \
               $SCRATCH_MNT/foo

  # Do something similar to our file bar, but the first truncation sets
  # the file size to 0 and the second truncation expands the size to the
  # double of what it was initially.
  $XFS_IO_PROG -c "truncate 0" \
               -c "truncate 253K" \
               -c "fsync" \
               $SCRATCH_MNT/bar

  _load_flakey_table $FLAKEY_DROP_WRITES
  _unmount_flakey

  # Allow writes again, mount to trigger log replay and validate file
  # contents.
  _load_flakey_table $FLAKEY_ALLOW_WRITES
  _mount_flakey

  # We expect foo to have a size of 125Kb, the first 64Kb of data all
  # having the value 0xaa and the remaining 61Kb to be a hole (all bytes
  # with value 0x00).
  echo "File foo content after log replay:"
  od -t x1 $SCRATCH_MNT/foo

  # We expect bar to have a size of 253Kb and no extents (any byte read
  # from bar has the value 0x00).
  echo "File bar content after log replay:"
  od -t x1 $SCRATCH_MNT/bar

  status=0
  exit

The expected file contents in the golden output are:

  File foo content after log replay:
  0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
  *
  0200000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  0372000
  File bar content after log replay:
  0000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  0772000

Without this fix, their contents are:

  File foo content after log replay:
  0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
  *
  0200000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb
  *
  0372000
  File bar content after log replay:
  0000000 ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee
  *
  0200000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  *
  0372000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  0772000

A test case submission for fstests follows soon.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

After commit 4f764e51 ("Btrfs: remove deleted xattrs on fsync log
replay"), we can end up in a situation where during log replay we end up
deleting xattrs that were never deleted when their file was last fsynced.

This happens in the fast fsync path (flag BTRFS_INODE_NEEDS_FULL_SYNC is
not set in the inode) if the inode has the flag BTRFS_INODE_COPY_EVERYTHING
set, the xattr was added in a past transaction and the leaf where the
xattr is located was not updated (COWed or created) in the current
transaction. In this scenario the xattr item never ends up in the log
tree and therefore at log replay time, which makes the replay code delete
the xattr from the fs/subvol tree as it thinks that xattr was deleted
prior to the last fsync.

Fix this by always logging all xattrs, which is the simplest and most
reliable way to detect deleted xattrs and replay the deletes at log replay
time.

This issue is reproducible with the following test case for fstests:

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"

  here=`pwd`
  tmp=/tmp/$$
  status=1	# failure is the default!

  _cleanup()
  {
      _cleanup_flakey
      rm -f $tmp.*
  }
  trap "_cleanup; exit \$status" 0 1 2 3 15

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter
  . ./common/dmflakey
  . ./common/attr

  # real QA test starts here

  # We create a lot of xattrs for a single file. Only btrfs and xfs are currently
  # able to store such a large mount of xattrs per file, other filesystems such
  # as ext3/4 and f2fs for example, fail with ENOSPC even if we attempt to add
  # less than 1000 xattrs with very small values.
  _supported_fs btrfs xfs
  _supported_os Linux
  _need_to_be_root
  _require_scratch
  _require_dm_flakey
  _require_attrs
  _require_metadata_journaling $SCRATCH_DEV

  rm -f $seqres.full

  _scratch_mkfs >> $seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create the test file with some initial data and make sure everything is
  # durably persisted.
  $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 32k" $SCRATCH_MNT/foo | _filter_xfs_io
  sync

  # Add many small xattrs to our file.
  # We create such a large amount because it's needed to trigger the issue found
  # in btrfs - we need to have an amount that causes the fs to have at least 3
  # btree leafs with xattrs stored in them, and it must work on any leaf size
  # (maximum leaf/node size is 64Kb).
  num_xattrs=2000
  for ((i = 1; i <= $num_xattrs; i++)); do
      name="user.attr_$(printf "%04d" $i)"
      $SETFATTR_PROG -n $name -v "val_$(printf "%04d" $i)" $SCRATCH_MNT/foo
  done

  # Sync the filesystem to force a commit of the current btrfs transaction, this
  # is a necessary condition to trigger the bug on btrfs.
  sync

  # Now update our file's data and fsync the file.
  # After a successful fsync, if the fsync log/journal is replayed we expect to
  # see all the xattrs we added before with the same values (and the updated file
  # data of course). Btrfs used to delete some of these xattrs when it replayed
  # its fsync log/journal.
  $XFS_IO_PROG -c "pwrite -S 0xbb 8K 16K" \
               -c "fsync" \
               $SCRATCH_MNT/foo | _filter_xfs_io

  # Simulate a crash/power loss.
  _load_flakey_table $FLAKEY_DROP_WRITES
  _unmount_flakey

  # Allow writes again and mount. This makes the fs replay its fsync log.
  _load_flakey_table $FLAKEY_ALLOW_WRITES
  _mount_flakey

  echo "File content after crash and log replay:"
  od -t x1 $SCRATCH_MNT/foo

  echo "File xattrs after crash and log replay:"
  for ((i = 1; i <= $num_xattrs; i++)); do
      name="user.attr_$(printf "%04d" $i)"
      echo -n "$name="
      $GETFATTR_PROG --absolute-names -n $name --only-values $SCRATCH_MNT/foo
      echo
  done

  status=0
  exit

The golden output expects all xattrs to be available, and with the correct
values, after the fsync log is replayed.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

If we do an append write to a file (which increases its inode's i_size)
that does not have the flag BTRFS_INODE_NEEDS_FULL_SYNC set in its inode,
and the previous transaction added a new hard link to the file, which sets
the flag BTRFS_INODE_COPY_EVERYTHING in the file's inode, and then fsync
the file, the inode's new i_size isn't logged. This has the consequence
that after the fsync log is replayed, the file size remains what it was
before the append write operation, which means users/applications will
not be able to read the data that was successsfully fsync'ed before.

This happens because neither the inode item nor the delayed inode get
their i_size updated when the append write is made - doing so would
require starting a transaction in the buffered write path, something that
we do not do intentionally for performance reasons.

Fix this by making sure that when the flag BTRFS_INODE_COPY_EVERYTHING is
set the inode is logged with its current i_size (log the in-memory inode
into the log tree).

This issue is not a recent regression and is easy to reproduce with the
following test case for fstests:

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"

  here=`pwd`
  tmp=/tmp/$$
  status=1	# failure is the default!

  _cleanup()
  {
          _cleanup_flakey
          rm -f $tmp.*
  }
  trap "_cleanup; exit \$status" 0 1 2 3 15

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter
  . ./common/dmflakey

  # real QA test starts here
  _supported_fs generic
  _supported_os Linux
  _need_to_be_root
  _require_scratch
  _require_dm_flakey
  _require_metadata_journaling $SCRATCH_DEV

  _crash_and_mount()
  {
          # Simulate a crash/power loss.
          _load_flakey_table $FLAKEY_DROP_WRITES
          _unmount_flakey
          # Allow writes again and mount. This makes the fs replay its fsync log.
          _load_flakey_table $FLAKEY_ALLOW_WRITES
          _mount_flakey
  }

  rm -f $seqres.full

  _scratch_mkfs >> $seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create the test file with some initial data and then fsync it.
  # The fsync here is only needed to trigger the issue in btrfs, as it causes the
  # the flag BTRFS_INODE_NEEDS_FULL_SYNC to be removed from the btrfs inode.
  $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 32k" \
                  -c "fsync" \
                  $SCRATCH_MNT/foo | _filter_xfs_io
  sync

  # Add a hard link to our file.
  # On btrfs this sets the flag BTRFS_INODE_COPY_EVERYTHING on the btrfs inode,
  # which is a necessary condition to trigger the issue.
  ln $SCRATCH_MNT/foo $SCRATCH_MNT/bar

  # Sync the filesystem to force a commit of the current btrfs transaction, this
  # is a necessary condition to trigger the bug on btrfs.
  sync

  # Now append more data to our file, increasing its size, and fsync the file.
  # In btrfs because the inode flag BTRFS_INODE_COPY_EVERYTHING was set and the
  # write path did not update the inode item in the btree nor the delayed inode
  # item (in memory struture) in the current transaction (created by the fsync
  # handler), the fsync did not record the inode's new i_size in the fsync
  # log/journal. This made the data unavailable after the fsync log/journal is
  # replayed.
  $XFS_IO_PROG -c "pwrite -S 0xbb 32K 32K" \
               -c "fsync" \
               $SCRATCH_MNT/foo | _filter_xfs_io

  echo "File content after fsync and before crash:"
  od -t x1 $SCRATCH_MNT/foo

  _crash_and_mount

  echo "File content after crash and log replay:"
  od -t x1 $SCRATCH_MNT/foo

  status=0
  exit

The expected file output before and after the crash/power failure expects the
appended data to be available, which is:

  0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
  *
  0100000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb
  *
  0200000

Cc: stable@vger.kernel.org
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

Often when running fstests btrfs/079 I was running into the following
trace during umount on one of my qemu/kvm test vms:

[ 8245.682441] WARNING: CPU: 8 PID: 25064 at fs/btrfs/extent-tree.c:138 btrfs_put_block_group+0x51/0x69 [btrfs]()
[ 8245.685039] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse parport_pc i2c_piix4 acpi_cpufreq processor psmouse i2c_core thermal_sys parport evdev serio_raw button pcspkr microcode ext4 crc16 jbd2 mbcache sg sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata floppy virtio_pci virtio_ring scsi_mod virtio e1000 [last unloaded: btrfs]
[ 8245.693860] CPU: 8 PID: 25064 Comm: umount Tainted: G        W       4.1.0-rc5-btrfs-next-10+ #1
[ 8245.695081] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
[ 8245.697583]  0000000000000009 ffff88020d047ce8 ffffffff8145eec7 ffffffff81095dce
[ 8245.699234]  0000000000000000 ffff88020d047d28 ffffffff8104b399 0000000000000028
[ 8245.700995]  ffffffffa04db07b ffff8801c6036c00 ffff8801c6036d68 ffff880202eb40b0
[ 8245.702510] Call Trace:
[ 8245.703006]  [<ffffffff8145eec7>] dump_stack+0x4f/0x7b
[ 8245.705393]  [<ffffffff81095dce>] ? console_unlock+0x356/0x3a2
[ 8245.706569]  [<ffffffff8104b399>] warn_slowpath_common+0xa1/0xbb
[ 8245.707747]  [<ffffffffa04db07b>] ? btrfs_put_block_group+0x51/0x69 [btrfs]
[ 8245.709101]  [<ffffffff8104b456>] warn_slowpath_null+0x1a/0x1c
[ 8245.710274]  [<ffffffffa04db07b>] btrfs_put_block_group+0x51/0x69 [btrfs]
[ 8245.711823]  [<ffffffffa04e3473>] btrfs_free_block_groups+0x145/0x322 [btrfs]
[ 8245.713251]  [<ffffffffa04ef31a>] close_ctree+0x1ef/0x325 [btrfs]
[ 8245.714448]  [<ffffffff8117d26e>] ? evict_inodes+0xdc/0xeb
[ 8245.715539]  [<ffffffffa04cb3ad>] btrfs_put_super+0x19/0x1b [btrfs]
[ 8245.716835]  [<ffffffff81167607>] generic_shutdown_super+0x73/0xef
[ 8245.718015]  [<ffffffff81167a3a>] kill_anon_super+0x13/0x1e
[ 8245.719101]  [<ffffffffa04cb1b6>] btrfs_kill_super+0x17/0x23 [btrfs]
[ 8245.720316]  [<ffffffff81167544>] deactivate_locked_super+0x3b/0x68
[ 8245.721517]  [<ffffffff81167dd6>] deactivate_super+0x3f/0x43
[ 8245.722581]  [<ffffffff8117fbb9>] cleanup_mnt+0x59/0x78
[ 8245.723538]  [<ffffffff8117fc18>] __cleanup_mnt+0x12/0x14
[ 8245.724572]  [<ffffffff81065371>] task_work_run+0x8f/0xbc
[ 8245.725598]  [<ffffffff810028fb>] do_notify_resume+0x45/0x53
[ 8245.726892]  [<ffffffff814651ac>] int_signal+0x12/0x17
[ 8245.737887] ---[ end trace a01d038397e99b92 ]---
[ 8245.769363] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 8245.770737] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse parport_pc i2c_piix4 acpi_cpufreq processor psmouse i2c_core thermal_sys parport evdev serio_raw button pcspkr microcode ext4 crc16 jbd2 mbcache sg sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata floppy virtio_pci virtio_ring scsi_mod virtio e1000 [last unloaded: btrfs]
[ 8245.772641] CPU: 2 PID: 25064 Comm: umount Tainted: G        W       4.1.0-rc5-btrfs-next-10+ #1
[ 8245.772641] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
[ 8245.772641] task: ffff880013005810 ti: ffff88020d044000 task.ti: ffff88020d044000
[ 8245.772641] RIP: 0010:[<ffffffffa051c8e6>]  [<ffffffffa051c8e6>] btrfs_queue_work+0x2c/0x14d [btrfs]
[ 8245.772641] RSP: 0018:ffff88020d0478b8  EFLAGS: 00010202
[ 8245.772641] RAX: 0000000000000004 RBX: 6b6b6b6b6b6b6b6b RCX: ffffffffa0581488
[ 8245.772641] RDX: 0000000000000000 RSI: ffff880194b7bf48 RDI: ffff880144b6a7a0
[ 8245.772641] RBP: ffff88020d0478d8 R08: 0000000000000000 R09: 000000000000ffff
[ 8245.772641] R10: 0000000000000004 R11: 0000000000000005 R12: ffff880194b7bf48
[ 8245.772641] R13: ffff880194b7bf48 R14: 0000000000000410 R15: 0000000000000000
[ 8245.772641] FS:  00007f991e77d840(0000) GS:ffff88023e280000(0000) knlGS:0000000000000000
[ 8245.772641] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 8245.772641] CR2: 00007fbbd325ee68 CR3: 000000021de8e000 CR4: 00000000000006e0
[ 8245.772641] Stack:
[ 8245.772641]  ffff880194b7bf00 ffff880202eb4000 ffff880194b7bf48 0000000000000410
[ 8245.772641]  ffff88020d047958 ffffffffa04ec6d5 ffff8801629b2ee8 0000000082987570
[ 8245.772641]  0000000000a5813f 0000000000000001 ffff880013006100 0000000000000002
[ 8245.772641] Call Trace:
[ 8245.772641]  [<ffffffffa04ec6d5>] btrfs_wq_submit_bio+0xe1/0x17b [btrfs]
[ 8245.772641]  [<ffffffff81086bff>] ? check_irq_usage+0x76/0x87
[ 8245.772641]  [<ffffffffa04ec825>] btree_submit_bio_hook+0xb6/0xd9 [btrfs]
[ 8245.772641]  [<ffffffffa04ebb7c>] ? btree_csum_one_bio+0xad/0xad [btrfs]
[ 8245.772641]  [<ffffffffa04eb1a6>] ? btree_io_failed_hook+0x5e/0x5e [btrfs]
[ 8245.772641]  [<ffffffffa050a6e7>] submit_one_bio+0x8c/0xc7 [btrfs]
[ 8245.772641]  [<ffffffffa050d75b>] submit_extent_page.isra.18+0x9d/0x186 [btrfs]
[ 8245.772641]  [<ffffffffa050d95b>] write_one_eb+0x117/0x1ae [btrfs]
[ 8245.772641]  [<ffffffffa050a79b>] ? end_extent_buffer_writeback+0x21/0x21 [btrfs]
[ 8245.772641]  [<ffffffffa0510510>] btree_write_cache_pages+0x2ab/0x385 [btrfs]
[ 8245.772641]  [<ffffffffa04eb2b8>] btree_writepages+0x23/0x5c [btrfs]
[ 8245.772641]  [<ffffffff8111c661>] do_writepages+0x23/0x2c
[ 8245.772641]  [<ffffffff81189cd4>] __writeback_single_inode+0xda/0x5bd
[ 8245.772641]  [<ffffffff8118aa60>] ? writeback_single_inode+0x2b/0x173
[ 8245.772641]  [<ffffffff8118aafd>] writeback_single_inode+0xc8/0x173
[ 8245.772641]  [<ffffffff8118ac95>] write_inode_now+0x8a/0x95
[ 8245.772641]  [<ffffffff81247bf0>] ? _atomic_dec_and_lock+0x30/0x4e
[ 8245.772641]  [<ffffffff8117cc5e>] iput+0x17d/0x26a
[ 8245.772641]  [<ffffffffa04ef355>] close_ctree+0x22a/0x325 [btrfs]
[ 8245.772641]  [<ffffffff8117d26e>] ? evict_inodes+0xdc/0xeb
[ 8245.772641]  [<ffffffffa04cb3ad>] btrfs_put_super+0x19/0x1b [btrfs]
[ 8245.772641]  [<ffffffff81167607>] generic_shutdown_super+0x73/0xef
[ 8245.772641]  [<ffffffff81167a3a>] kill_anon_super+0x13/0x1e
[ 8245.772641]  [<ffffffffa04cb1b6>] btrfs_kill_super+0x17/0x23 [btrfs]
[ 8245.772641]  [<ffffffff81167544>] deactivate_locked_super+0x3b/0x68
[ 8245.772641]  [<ffffffff81167dd6>] deactivate_super+0x3f/0x43
[ 8245.772641]  [<ffffffff8117fbb9>] cleanup_mnt+0x59/0x78
[ 8245.772641]  [<ffffffff8117fc18>] __cleanup_mnt+0x12/0x14
[ 8245.772641]  [<ffffffff81065371>] task_work_run+0x8f/0xbc
[ 8245.772641]  [<ffffffff810028fb>] do_notify_resume+0x45/0x53
[ 8245.772641]  [<ffffffff814651ac>] int_signal+0x12/0x17
[ 8245.772641] Code: 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 49 89 f4 48 8b 46 70 a8 04 74 09 48 8b 5f 08 48 85 db 75 03 48 8b 1f 49 89 5c 24 68 <83> 7b 5c ff 74 04 f0 ff 43 50 49 83 7c 24 08 00 74 2c 4c 8d 6b
[ 8245.772641] RIP  [<ffffffffa051c8e6>] btrfs_queue_work+0x2c/0x14d [btrfs]
[ 8245.772641]  RSP <ffff88020d0478b8>
[ 8245.845040] ---[ end trace a01d038397e99b93 ]---

For logical reasons such as the phase of the moon, this happened more
often with "-o inode_cache" than without any mount options.

After some debugging it turned out to be simple to understand what was
happening:

1) close_ctree() is called;

2) It then stops the transaction kthread, which commits the current
   transaction;

3) It asks the cleaner kthread to stop, which is currently running
   btrfs_delete_unused_bgs();

4) btrfs_delete_unused_bgs() finds an unused block group, starts a new
   transaction, deletes the block group, which implies COWing some
   tree nodes and leafs and dirtying their respective pages, and then
   finally it ends the transaction it started, without committing it;

5) The cleaner kthread stops;

6) close_ctree() releases (from memory) the block group objects, which
   produces the warning in the trace pasted above;

7) Then it invalidates all pages of the btree inode, by calling
   invalidate_inode_pages2(), which waits for any pages under writeback,
   and releases any non-dirty pages;

8) All work queues are destroyed (waiting first for their current tasks
   to finish execution);

9) A final iput() is called against the btree inode;

10) This iput triggers a writeback of the btree inode because it still
    has dirty pages;

11) This starts the whole chain of callbacks for the btree inode until
    it eventually reaches btrfs_wq_submit_bio() where it leads to a
    NULL pointer dereference because the work queues were already
    destroyed.

Fix this by making the cleaner commit any transaction that it started
after the transaction kthread was stopped.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

While the inode cache caching kthread is calling btrfs_unpin_free_ino(),
we could have a concurrent call to btrfs_return_ino() that adds a new
entry to the root's free space cache of pinned inodes. This concurrent
call does not acquire the fs_info->commit_root_sem before adding a new
entry if the caching state is BTRFS_CACHE_FINISHED, which is a problem
because the caching kthread calls btrfs_unpin_free_ino() after setting
the caching state to BTRFS_CACHE_FINISHED and therefore races with
the task calling btrfs_return_ino(), which is adding a new entry, while
the former (caching kthread) is navigating the cache's rbtree, removing
and freeing nodes from the cache's rbtree without acquiring the spinlock
that protects the rbtree.

This race resulted in memory corruption due to double free of struct
btrfs_free_space objects because both tasks can end up doing freeing the
same objects. Note that adding a new entry can result in merging it with
other entries in the cache, in which case those entries are freed.
This is particularly important as btrfs_free_space structures are also
used for the block group free space caches.

This memory corruption can be detected by a debugging kernel, which
reports it with the following trace:

[132408.501148] slab error in verify_redzone_free(): cache `btrfs_free_space': double free detected
[132408.505075] CPU: 15 PID: 12248 Comm: btrfs-ino-cache Tainted: G        W       4.1.0-rc5-btrfs-next-10+ #1
[132408.505075] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
[132408.505075]  ffff880023e7d320 ffff880163d73cd8 ffffffff8145eec7 ffffffff81095dce
[132408.505075]  ffff880009735d40 ffff880163d73ce8 ffffffff81154e1e ffff880163d73d68
[132408.505075]  ffffffff81155733 ffffffffa054a95a ffff8801b6099f00 ffffffffa0505b5f
[132408.505075] Call Trace:
[132408.505075]  [<ffffffff8145eec7>] dump_stack+0x4f/0x7b
[132408.505075]  [<ffffffff81095dce>] ? console_unlock+0x356/0x3a2
[132408.505075]  [<ffffffff81154e1e>] __slab_error.isra.28+0x25/0x36
[132408.505075]  [<ffffffff81155733>] __cache_free+0xe2/0x4b6
[132408.505075]  [<ffffffffa054a95a>] ? __btrfs_add_free_space+0x2f0/0x343 [btrfs]
[132408.505075]  [<ffffffffa0505b5f>] ? btrfs_unpin_free_ino+0x8e/0x99 [btrfs]
[132408.505075]  [<ffffffff810f3b30>] ? time_hardirqs_off+0x15/0x28
[132408.505075]  [<ffffffff81084d42>] ? trace_hardirqs_off+0xd/0xf
[132408.505075]  [<ffffffff811563a1>] ? kfree+0xb6/0x14e
[132408.505075]  [<ffffffff811563d0>] kfree+0xe5/0x14e
[132408.505075]  [<ffffffffa0505b5f>] btrfs_unpin_free_ino+0x8e/0x99 [btrfs]
[132408.505075]  [<ffffffffa0505e08>] caching_kthread+0x29e/0x2d9 [btrfs]
[132408.505075]  [<ffffffffa0505b6a>] ? btrfs_unpin_free_ino+0x99/0x99 [btrfs]
[132408.505075]  [<ffffffff8106698f>] kthread+0xef/0xf7
[132408.505075]  [<ffffffff810f3b08>] ? time_hardirqs_on+0x15/0x28
[132408.505075]  [<ffffffff810668a0>] ? __kthread_parkme+0xad/0xad
[132408.505075]  [<ffffffff814653d2>] ret_from_fork+0x42/0x70
[132408.505075]  [<ffffffff810668a0>] ? __kthread_parkme+0xad/0xad
[132408.505075] ffff880023e7d320: redzone 1:0x9f911029d74e35b, redzone 2:0x9f911029d74e35b.
[132409.501654] slab: double free detected in cache 'btrfs_free_space', objp ffff880023e7d320
[132409.503355] ------------[ cut here ]------------
[132409.504241] kernel BUG at mm/slab.c:2571!

Therefore fix this by having btrfs_unpin_free_ino() acquire the lock
that protects the rbtree while doing the searches and removing entries.

Fixes: 1c70d8fb ("Btrfs: fix inode caching vs tree log")
Cc: stable@vger.kernel.org
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

The free space entries are allocated using kmem_cache_zalloc(),
through __btrfs_add_free_space(), therefore we should use
kmem_cache_free() and not kfree() to avoid any confusion and
any potential problem. Looking at the kfree() definition at
mm/slab.c it has the following comment:

  /*
   * (...)
   *
   * Don't free memory not originally allocated by kmalloc()
   * or you will run into trouble.
   */

So better be safe and use kmem_cache_free().

Cc: stable@vger.kernel.org
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

We have a race between deleting an unused block group and balancing the
same block group that leads to an assertion failure/BUG(), producing the
following trace:

[181631.208236] BTRFS: assertion failed: 0, file: fs/btrfs/volumes.c, line: 2622
[181631.220591] ------------[ cut here ]------------
[181631.222959] kernel BUG at fs/btrfs/ctree.h:4062!
[181631.223932] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[181631.224566] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse acpi_cpufreq parpor$
[181631.224566] CPU: 8 PID: 17451 Comm: btrfs Tainted: G        W       4.1.0-rc5-btrfs-next-10+ #1
[181631.224566] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
[181631.224566] task: ffff880127e09590 ti: ffff8800b5824000 task.ti: ffff8800b5824000
[181631.224566] RIP: 0010:[<ffffffffa03f19f6>]  [<ffffffffa03f19f6>] assfail.constprop.50+0x1e/0x20 [btrfs]
[181631.224566] RSP: 0018:ffff8800b5827ae8  EFLAGS: 00010246
[181631.224566] RAX: 0000000000000040 RBX: ffff8800109fc218 RCX: ffffffff81095dce
[181631.224566] RDX: 0000000000005124 RSI: ffffffff81464819 RDI: 00000000ffffffff
[181631.224566] RBP: ffff8800b5827ae8 R08: 0000000000000001 R09: 0000000000000000
[181631.224566] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800109fc200
[181631.224566] R13: ffff880020095000 R14: ffff8800b1a13f38 R15: ffff880020095000
[181631.224566] FS:  00007f70ca0b0c80(0000) GS:ffff88013ec00000(0000) knlGS:0000000000000000
[181631.224566] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[181631.224566] CR2: 00007f2872ab6e68 CR3: 00000000a717c000 CR4: 00000000000006e0
[181631.224566] Stack:
[181631.224566]  ffff8800b5827ba8 ffffffffa03f3916 ffff8800b5827b38 ffffffffa03d080e
[181631.224566]  ffffffffa03d1423 ffff880020095000 ffff88001233c000 0000000000000001
[181631.224566]  ffff880020095000 ffff8800b1a13f38 0000000a69c00000 0000000000000000
[181631.224566] Call Trace:
[181631.224566]  [<ffffffffa03f3916>] btrfs_remove_chunk+0xa4/0x6bb [btrfs]
[181631.224566]  [<ffffffffa03d080e>] ? join_transaction.isra.8+0xb9/0x3ba [btrfs]
[181631.224566]  [<ffffffffa03d1423>] ? wait_current_trans.isra.13+0x22/0xfc [btrfs]
[181631.224566]  [<ffffffffa03f3fbc>] btrfs_relocate_chunk.isra.29+0x8f/0xa7 [btrfs]
[181631.224566]  [<ffffffffa03f54df>] btrfs_balance+0xaa4/0xc52 [btrfs]
[181631.224566]  [<ffffffffa03fd388>] btrfs_ioctl_balance+0x23f/0x2b0 [btrfs]
[181631.224566]  [<ffffffff810872f9>] ? trace_hardirqs_on+0xd/0xf
[181631.224566]  [<ffffffffa04019a3>] btrfs_ioctl+0xfe2/0x2220 [btrfs]
[181631.224566]  [<ffffffff812603ed>] ? __this_cpu_preempt_check+0x13/0x15
[181631.224566]  [<ffffffff81084669>] ? arch_local_irq_save+0x9/0xc
[181631.224566]  [<ffffffff81138def>] ? handle_mm_fault+0x834/0xcd2
[181631.224566]  [<ffffffff81138def>] ? handle_mm_fault+0x834/0xcd2
[181631.224566]  [<ffffffff8103e48c>] ? __do_page_fault+0x211/0x424
[181631.224566]  [<ffffffff811755e6>] do_vfs_ioctl+0x3c6/0x479
(...)

The sequence of steps leading to this are:

           CPU 0                                         CPU 1

  btrfs_balance()
    btrfs_relocate_chunk()

      btrfs_relocate_block_group(bg X)
        btrfs_lookup_block_group(bg X)

                                               cleaner_kthread
                                                  locks fs_info->cleaner_mutex

                                                  btrfs_delete_unused_bgs()
                                                    finds bg X, which became
                                                    unused in the previous
                                                    transaction

                                                    checks bg X ->ro == 0,
                                                    so it proceeds
        sets bg X ->ro to 1
        (btrfs_set_block_group_ro(bg X))

        blocks on fs_info->cleaner_mutex
                                                    btrfs_remove_chunk(bg X)
                                                  unlocks fs_info->cleaner_mutex

        acquires fs_info->cleaner_mutex
        relocate_block_group()
          --> does nothing, no extents found in
              the extent tree from bg X
        unlocks fs_info->cleaner_mutex

      btrfs_relocate_block_group(bg X) returns

    btrfs_remove_chunk(bg X)
       extent map not found
          --> ASSERT(0)

Fix this by using a new mutex to make sure these 2 operations, block
group relocation and removal, are serialized.

This issue is reproducible by running fstests generic/038 (which stresses
chunk allocation and automatic removal of unused block groups) together
with the following balance loop:

    while true; do btrfs balance start -dusage=0 <mountpoint> ; done
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

Although it is a rare case, we'd better free previous allocated
memory on error.
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

It is introduced by:
 c404e0dc
 Btrfs: fix use-after-free in the finishing procedure of the device replace

But seems no relationship with that bug, this patch revirt these
code block for cleanup.
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Currently, we can only set a limitation on a qgroup, but we
can not clear it.

This patch provide a choice to user to clear a limitation on
qgroup by passing a value of CLEAR_VALUE(-1) to kernel.
Reported-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NDongsheng Yang <yangds.fnst@cn.fujitsu.com>
Tested-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

There is a cut and paste error so instead of freeing "head_ref", we free
"ref" twice.

Fixes: 3368d001 ('btrfs: qgroup: Record possible quota-related extent for qgroup.')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Tested-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

This patch will add support to show the replacing target in sysfs
during the process of replacement.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

When btrfs on a device is overwritten with a new btrfs (mkfs),
the old btrfs instance in the kernel becomes stale. So with this
patch, if kernel finds device is overwritten then delete the stale
fsid/uuid.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>

Neil Horman pointed out a problem where if he did something like this

receive A
snap A B
change B
send -p A B

and then on another box do

recieve A
receive B

the receive B would fail because we use the UUID of A for the clone sources for
B.  This makes sense most of the time because normally you are sending from the
original sources, not a received source.  However when you use a recieved subvol
its UUID is going to be something completely different, so if you then try to
receive the diff on a different volume it won't find the UUID because the new A
will be something else.  The only constant is the received uuid.  So instead
check to see if we have received_uuid set on the root, and if so use that as the
clone source, as btrfs receive looks for matches either in received_uuid or
uuid.  Thanks,
Reported-by: NNeil Horman <nhorman@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Reviewed-by: NHugo Mills <hugo@carfax.org.uk>
Signed-off-by: NChris Mason <clm@fb.com>

@log_root_tree should not be referenced after kfree.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Reported-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NChris Mason <clm@fb.com>

btrfs will report no_space when we run following write and delete
file loop:
 # FILE_SIZE_M=[ 75% of fs space ]
 # DEV=[ some dev ]
 # MNT=[ some dir ]
 #
 # mkfs.btrfs -f "$DEV"
 # mount -o nodatacow "$DEV" "$MNT"
 # for ((i = 0; i < 100; i++)); do dd if=/dev/zero of="$MNT"/file0 bs=1M count="$FILE_SIZE_M"; rm -f "$MNT"/file0; done
 #

Reason:
 iput() and evict() is run after write pages to block device, if
 write pages work is not finished before next write, the "rm"ed space
 is not freed, and caused above bug.

Fix:
 We can add "-o flushoncommit" mount option to avoid above bug, but
 it have performance problem. Actually, we can to wait for on-the-fly
 writes only when no-space happened, it is which this patch do.
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

qgroup.

Make snapshot accounting work with new extent-oriented mechanism by
skipping given root in new/old_roots in create_pending_snapshot().
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

This is used by later qgroup fix patches for snapshot.

As current snapshot accounting is done by btrfs_qgroup_inherit(), but
new extent oriented quota mechanism will account extent from
btrfs_copy_root() and other snapshot things, causing wrong result.

So add this ability to handle snapshot accounting.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

This function will delete unode with given (val,aux) pair.
And with this patch, seqnum for debug usage doesn't have any meaning
now, so remove them.

This is used by later patches to skip snapshot root.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Goodbye, the old mechanisim.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Since the self test transaction don't have delayed_ref_roots, so use
find_all_roots() and export btrfs_qgroup_account_extent() to simulate it
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Switch from old ref_node based qgroup to extent based qgroup mechanism
for normal operations.

The new mechanism should hugely reduce the overhead of btrfs quota
system, and further more, the codes and logic should be more clean and
easier to maintain.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Switch rescan to use the new new extent oriented mechanism.

As rescan is also based on extent, new mechanism is just a perfect match
for rescan.

With re-designed internal functions, rescan is quite easy, just call
btrfs_find_all_roots() and then btrfs_qgroup_account_one_extent().
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

btrfs_qgroup_account_extents().

The new btrfs_qgroup_account_extents() function should be called in
btrfs_commit_transaction() and it will update all the qgroup according
to delayed_ref_root->dirty_extent_root.

The new function can handle both normal operation during
commit_transaction() or in rescan in a unified method with clearer
logic.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

btrfs_find_all_roots().

Allow btrfs_find_all_roots() to skip all delayed_ref_head lock and tree
lock to do tree search.

This is important for later qgroup implement which will call
find_all_roots() after fs trees are committed.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Add function btrfs_qgroup_prepare_account_extents() to get old_roots
which are needed for qgroup.

We do it in commit_transaction() and before switch_roots(), and only
search commit_root, so it gives a quite accurate view for previous
transaction.

With old_roots from previous transaction, we can use it to do accurate
account with current transaction.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Add hook in add_delayed_ref_head() to record quota-related extent record
into delayed_ref_root->dirty_extent_record rb-tree for later qgroup
accounting.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>