When a cloned request is retried on other queues it always needs
to be checked against the queue limits of that queue.
Otherwise the calculations for nr_phys_segments might be wrong,
leading to a crash in scsi_init_sgtable().

To clarify this the patch renames blk_rq_check_limits()
to blk_cloned_rq_check_limits() and removes the symbol
export, as the new function should only be used for
cloned requests and never exported.

Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Ewan Milne <emilne@redhat.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NHannes Reinecke <hare@suse.de>
Fixes: e2a60da7 ("block: Clean up special command handling logic")
Cc: stable@vger.kernel.org # 3.7+
Acked-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Commit 4f258a46 ("sd: Fix maximum I/O size for BLOCK_PC requests")
had the unfortunate side-effect of removing an implicit clamp to
BLK_DEF_MAX_SECTORS for REQ_TYPE_FS requests in the block layer
code. This caused problems for some SMR drives.

Debugging this issue revealed a few problems with the existing
infrastructure since the block layer didn't know how to deal with
device-imposed limits, only limits set by the I/O controller.

 - Introduce a new queue limit, max_dev_sectors, which is used by the
   ULD to signal the maximum sectors for a REQ_TYPE_FS request.

 - Ensure that max_dev_sectors is correctly stacked and taken into
   account when overriding max_sectors through sysfs.

 - Rework sd_read_block_limits() so it saves the max_xfer and opt_xfer
   values for later processing.

 - In sd_revalidate() set the queue's max_dev_sectors based on the
   MAXIMUM TRANSFER LENGTH value in the Block Limits VPD. If this value
   is not reported, fall back to a cap based on the CDB TRANSFER LENGTH
   field size.

 - In sd_revalidate(), use OPTIMAL TRANSFER LENGTH from the Block Limits
   VPD--if reported and sane--to signal the preferred device transfer
   size for FS requests. Otherwise use BLK_DEF_MAX_SECTORS.

 - blk_limits_max_hw_sectors() is no longer used and can be removed.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93581Reviewed-by: NChristoph Hellwig <hch@lst.de>
Tested-by: sweeneygj@gmx.com
Tested-by: NArzeets <anatol.pomozov@gmail.com>
Tested-by: NDavid Eisner <david.eisner@oriel.oxon.org>
Tested-by: NMario Kicherer <dev@kicherer.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix use after free crashes like the following:

 general protection fault: 0000 [#1] SMP
 Call Trace:
  [<ffffffffa0050216>] ? pmem_do_bvec.isra.12+0xa6/0xf0 [nd_pmem]
  [<ffffffffa0050ba2>] pmem_rw_page+0x42/0x80 [nd_pmem]
  [<ffffffff8128fd90>] bdev_read_page+0x50/0x60
  [<ffffffff812972f0>] do_mpage_readpage+0x510/0x770
  [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20
  [<ffffffff811d86dc>] ? lru_cache_add+0x1c/0x50
  [<ffffffff81297657>] mpage_readpages+0x107/0x170
  [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20
  [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20
  [<ffffffff8129058d>] blkdev_readpages+0x1d/0x20
  [<ffffffff811d615f>] __do_page_cache_readahead+0x28f/0x310
  [<ffffffff811d6039>] ? __do_page_cache_readahead+0x169/0x310
  [<ffffffff811c5abd>] ? pagecache_get_page+0x2d/0x1d0
  [<ffffffff811c76f6>] filemap_fault+0x396/0x530
  [<ffffffff811f816e>] __do_fault+0x4e/0xf0
  [<ffffffff811fce7d>] handle_mm_fault+0x11bd/0x1b50

Cc: <stable@vger.kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Reported-by: Nkbuild test robot <lkp@intel.com>
Acked-by: NMatthew Wilcox <willy@linux.intel.com>
[willy: symmetry fixups]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Add basic support for polling for specific IO to complete. This uses
the cookie that blk-mq passes back, which enables the block layer
to pass this cookie to the driver to spin for a specific request.

This will be combined with request latency tracking, so we can make
qualified decisions about when to poll and when not to. For now, for
benchmark purposes, we add a sysfs file that controls whether polling
is enabled or not.
Signed-off-by: NJens Axboe <axboe@fb.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>

No functional changes in this patch, but it prepares us for returning
a more useful cookie related to the IO that was queued up.
Signed-off-by: NJens Axboe <axboe@fb.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>

This commits adds a driver API and ioctls for controlling Persistent
Reservations s/genericly/generically/ at the block layer.  Persistent
Reservations are supported by SCSI and NVMe and allow controlling who gets
access to a device in a shared storage setup.

Note that we add a pr_ops structure to struct block_device_operations
instead of adding the members directly to avoid bloating all instances
of devices that will never support Persistent Reservations.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

A trace like the following proceeds a crash in bio_integrity_process()
when it goes to use an already freed blk_integrity profile.

 BUG: unable to handle kernel paging request at ffff8800d31b10d8
 IP: [<ffff8800d31b10d8>] 0xffff8800d31b10d8
 PGD 2f65067 PUD 21fffd067 PMD 80000000d30001e3
 Oops: 0011 [#1] SMP
 Dumping ftrace buffer:
 ---------------------------------
    ndctl-2222    2.... 44526245us : disk_release: pmem1s
 systemd--2223    4.... 44573945us : bio_integrity_endio: pmem1s
    <...>-409     4.... 44574005us : bio_integrity_process: pmem1s
 ---------------------------------
[..]
  Call Trace:
  [<ffffffff8144e0f9>] ? bio_integrity_process+0x159/0x2d0
  [<ffffffff8144e4f6>] bio_integrity_verify_fn+0x36/0x60
  [<ffffffff810bd2dc>] process_one_work+0x1cc/0x4e0

Given that a request_queue is pinned while i/o is in flight and that a
gendisk is allowed to have a shorter lifetime, move blk_integrity to
request_queue to satisfy requests arriving after the gendisk has been
torn down.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
[martin: fix the CONFIG_BLK_DEV_INTEGRITY=n case]
Tested-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Allow pmem, and other synchronous/bio-based block drivers, to fallback
on a per-cpu reference count managed by the core for tracking queue
live/dead state.

The existing per-cpu reference count for the blk_mq case is promoted to
be used in all block i/o scenarios.  This involves initializing it by
default, waiting for it to drop to zero at exit, and holding a live
reference over the invocation of q->make_request_fn() in
generic_make_request().  The blk_mq code continues to take its own
reference per blk_mq request and retains the ability to freeze the
queue, but the check that the queue is frozen is moved to
generic_make_request().

This fixes crash signatures like the following:

 BUG: unable to handle kernel paging request at ffff880140000000
 [..]
 Call Trace:
  [<ffffffff8145e8bf>] ? copy_user_handle_tail+0x5f/0x70
  [<ffffffffa004e1e0>] pmem_do_bvec.isra.11+0x70/0xf0 [nd_pmem]
  [<ffffffffa004e331>] pmem_make_request+0xd1/0x200 [nd_pmem]
  [<ffffffff811c3162>] ? mempool_alloc+0x72/0x1a0
  [<ffffffff8141f8b6>] generic_make_request+0xd6/0x110
  [<ffffffff8141f966>] submit_bio+0x76/0x170
  [<ffffffff81286dff>] submit_bh_wbc+0x12f/0x160
  [<ffffffff81286e62>] submit_bh+0x12/0x20
  [<ffffffff813395bd>] jbd2_write_superblock+0x8d/0x170
  [<ffffffff8133974d>] jbd2_mark_journal_empty+0x5d/0x90
  [<ffffffff813399cb>] jbd2_journal_destroy+0x24b/0x270
  [<ffffffff810bc4ca>] ? put_pwq_unlocked+0x2a/0x30
  [<ffffffff810bc6f5>] ? destroy_workqueue+0x225/0x250
  [<ffffffff81303494>] ext4_put_super+0x64/0x360
  [<ffffffff8124ab1a>] generic_shutdown_super+0x6a/0xf0

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Up until now the_integrity profile has been dynamically allocated and
attached to struct gendisk after the disk has been made active.

This causes problems because NVMe devices need to register the profile
prior to the partition table being read due to a mandatory metadata
buffer requirement. In addition, DM goes through hoops to deal with
preallocating, but not initializing integrity profiles.

Since the integrity profile is small (4 bytes + a pointer), Christoph
suggested moving it to struct gendisk proper. This requires several
changes:

 - Moving the blk_integrity definition to genhd.h.

 - Inlining blk_integrity in struct gendisk.

 - Removing the dynamic allocation code.

 - Adding helper functions which allow gendisk to set up and tear down
   the integrity sysfs dir when a disk is added/deleted.

 - Adding a blk_integrity_revalidate() callback for updating the stable
   pages bdi setting.

 - The calls that depend on whether a device has an integrity profile or
   not now key off of the bi->profile pointer.

 - Simplifying the integrity support routines in DM (Mike Snitzer).
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reported-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The per-device properties in the blk_integrity structure were previously
unsigned short. However, most of the values fit inside a char. The only
exception is the data interval size and we can work around that by
storing it as a power of two.

This cuts the size of the dynamic portion of blk_integrity in half.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reported-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

We previously made a complete copy of a device's data integrity profile
even though several of the fields inside the blk_integrity struct are
pointers to fixed template entries in t10-pi.c.

Split the static and per-device portions so that we can reference the
template directly.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reported-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The integrity kobject purely exists to support the integrity
subdirectory in sysfs and doesn't really have anything to do with the
blk_integrity data structure. Move the kobject to struct gendisk where
it belongs.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reported-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

There is a race between cpu hotplug handling and adding/deleting
gendisk for blk-mq, where both are trying to register and unregister
the same sysfs entries.

null_add_dev
    --> blk_mq_init_queue
        --> blk_mq_init_allocated_queue
            --> add to 'all_q_list' (*)
    --> add_disk
        --> blk_register_queue
            --> blk_mq_register_disk (++)

null_del_dev
    --> del_gendisk
        --> blk_unregister_queue
            --> blk_mq_unregister_disk (--)
    --> blk_cleanup_queue
        --> blk_mq_free_queue
            --> del from 'all_q_list' (*)

blk_mq_queue_reinit
    --> blk_mq_sysfs_unregister (-)
    --> blk_mq_sysfs_register (+)

While the request queue is added to 'all_q_list' (*),
blk_mq_queue_reinit() can be called for the queue anytime by CPU
hotplug callback.  But blk_mq_sysfs_unregister (-) and
blk_mq_sysfs_register (+) in blk_mq_queue_reinit must not be called
before blk_mq_register_disk (++) and after blk_mq_unregister_disk (--)
is finished.  Because '/sys/block/*/mq/' is not exists.

There has already been BLK_MQ_F_SYSFS_UP flag in hctx->flags which can
be used to track these sysfs stuff, but it is only fixing this issue
partially.

In order to fix it completely, we just need per-queue flag instead of
per-hctx flag with appropriate locking.  So this introduces
q->mq_sysfs_init_done which is properly protected with all_q_mutex.

Also, we need to ensure that blk_mq_map_swqueue() is called with
all_q_mutex is held.  Since hctx->nr_ctx is reset temporarily and
updated in blk_mq_map_swqueue(), so we should avoid
blk_mq_register_hctx() seeing the temporary hctx->nr_ctx value
in CPU hotplug handling or adding/deleting gendisk .
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: NMing Lei <tom.leiming@gmail.com>
Cc: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

rq_data_dir() returns either READ or WRITE (0 == READ, 1 == WRITE), not
a boolean value.

Now, admittedly the "!= 0" doesn't really change the value (0 stays as
zero, 1 stays as one), but it's not only redundant, it confuses gcc, and
causes gcc to warn about the construct

    switch (rq_data_dir(req)) {
        case READ:
            ...
        case WRITE:
            ...

that we have in a few drivers.

Now, the gcc warning is silly and stupid (it seems to warn not about the
switch value having a different type from the case statements, but about
_any_ boolean switch value), but in this case the code itself is silly
and stupid too, so let's just change it, and get rid of warnings like
this:

  drivers/block/hd.c: In function ‘hd_request’:
  drivers/block/hd.c:630:11: warning: switch condition has boolean value [-Wswitch-bool]
     switch (rq_data_dir(req)) {

The odd '!= 0' came in when "cmd_flags" got turned into a "u64" in
commit 5953316d ("block: make rq->cmd_flags be 64-bit") and is
presumably because the old code (that just did a logical 'and' with 1)
would then end up making the type of rq_data_dir() be u64 too.

But if we want to retain the old regular integer type, let's just cast
the result to 'int' rather than use that rather odd '!= 0'.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If a driver sets the block queue virtual boundary mask, it means that
it cannot handle gaps so we must not allow those in the integrity
payload as well.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>

Fixed up by me to have duplicate integrity merge functions, depending
on whether block integrity is enabled or not. Fixes a compilations
issue with CONFIG_BLK_DEV_INTEGRITY unset.
Signed-off-by: NJens Axboe <axboe@fb.com>

We are checking for gaps to previous bio_vec, which can
only detect back merges gaps. Moreover, at the point where
we check for a gap, we don't know if we will attempt a back
or a front merge. Thus, check for gap to prev in a back merge
attempt and check for a gap to next in a front merge attempt.
Signed-off-by: NJens Axboe <axboe@fb.com>
[sagig: Minor rename change]
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>

None of the implementations currently use it.  The common
bdev_direct_access() entry point handles all the size checks before
calling ->direct_access().
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Update the annotation for the kaddr pointer returned by direct_access()
so that it is a __pmem pointer.  This is consistent with the PMEM driver
and with how this direct_access() pointer is used in the DAX code.
Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The SG_GAPS queue flag caused checks for bio vector alignment against
PAGE_SIZE, but the device may have different constraints. This patch
adds a queue limits so a driver with such constraints can set to allow
requests that would have been unnecessarily split. The new gaps check
takes the request_queue as a parameter to simplify the logic around
invoking this function.

This new limit makes the queue flag redundant, so removing it and
all usage. Device-mappers will inherit the correct settings through
blk_stack_limits().
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

A value of 2560 (1280k) will accommodate a 10-data-disk stripe
write with chunk size 128k.  In the testing I've done using
iozone, fio, and aio-stress across a number of different storage
devices, a value of 1280 does not show a big performance
difference from 512, but will hopefully help software RAID
setups using SATA disks, as reported by Christoph.

NOTE: drivers/block/aoe/aoeblk.c sets its own max_hw_sectors_kb to
BLK_DEF_MAX_SECTORS.  So, this patch essentially changes aeoblk to
Use a larger maximum sector size, and I did not test this.
Signed-off-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This reverts commit 34b48db6.
That commit caused performance regressions for streaming I/O
workloads on a number of different storage devices, from
SATA disks to external RAID arrays.  It also managed to
trip up some buggy firmware in at least one drive, causing
data corruption.

The next patch will bump the default max_sectors_kb value to
1280, which will accommodate a 10-data-disk stripe write
with chunk size 128k.  In the testing I've done using iozone,
fio, and aio-stress, a value of 1280 does not show a big
performance difference from 512.  This will hopefully still
help the software RAID setup that Christoph saw the original
performance gains with while still not regressing other
storage configurations.
Signed-off-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

As generic_make_request() is now able to handle arbitrarily sized bios,
it's no longer necessary for each individual block driver to define its
own ->merge_bvec_fn() callback. Remove every invocation completely.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: drbd-user@lists.linbit.com
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@kernel.org>
Cc: ceph-devel@vger.kernel.org
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Neil Brown <neilb@suse.de>
Cc: linux-raid@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: NeilBrown <neilb@suse.de> (for the 'md' bits)
Acked-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
[dpark: also remove ->merge_bvec_fn() in dm-thin as well as
 dm-era-target, and resolve merge conflicts]
Signed-off-by: NDongsu Park <dpark@posteo.net>
Signed-off-by: NMing Lin <ming.l@ssi.samsung.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The way the block layer is currently written, it goes to great lengths
to avoid having to split bios; upper layer code (such as bio_add_page())
checks what the underlying device can handle and tries to always create
bios that don't need to be split.

But this approach becomes unwieldy and eventually breaks down with
stacked devices and devices with dynamic limits, and it adds a lot of
complexity. If the block layer could split bios as needed, we could
eliminate a lot of complexity elsewhere - particularly in stacked
drivers. Code that creates bios can then create whatever size bios are
convenient, and more importantly stacked drivers don't have to deal with
both their own bio size limitations and the limitations of the
(potentially multiple) devices underneath them.  In the future this will
let us delete merge_bvec_fn and a bunch of other code.

We do this by adding calls to blk_queue_split() to the various
make_request functions that need it - a few can already handle arbitrary
size bios. Note that we add the call _after_ any call to
blk_queue_bounce(); this means that blk_queue_split() and
blk_recalc_rq_segments() don't need to be concerned with bouncing
affecting segment merging.

Some make_request_fn() callbacks were simple enough to audit and verify
they don't need blk_queue_split() calls. The skipped ones are:

 * nfhd_make_request (arch/m68k/emu/nfblock.c)
 * axon_ram_make_request (arch/powerpc/sysdev/axonram.c)
 * simdisk_make_request (arch/xtensa/platforms/iss/simdisk.c)
 * brd_make_request (ramdisk - drivers/block/brd.c)
 * mtip_submit_request (drivers/block/mtip32xx/mtip32xx.c)
 * loop_make_request
 * null_queue_bio
 * bcache's make_request fns

Some others are almost certainly safe to remove now, but will be left
for future patches.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: drbd-user@lists.linbit.com
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Jim Paris <jim@jtan.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Acked-by: NeilBrown <neilb@suse.de> (for the 'md/md.c' bits)
Acked-by: NMike Snitzer <snitzer@redhat.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
[dpark: skip more mq-based drivers, resolve merge conflicts, etc.]
Signed-off-by: NDongsu Park <dpark@posteo.net>
Signed-off-by: NMing Lin <ming.l@ssi.samsung.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Lots of devices support huge discard sizes these days. Depending
on how the device handles them internally, huge discards can
introduce massive latencies (hundreds of msec) on the device side.

We have a sysfs file, discard_max_bytes, that advertises the max
hardware supported discard size. Make this writeable, and split
the settings into a soft and hard limit. This can be set from
'discard_granularity' and up to the hardware limit.

Add a new sysfs file, 'discard_max_hw_bytes', that shows the hw
set limit.
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This reverts commit 5f1b670d.

Justification for revert as reported in this dm-devel post:
https://www.redhat.com/archives/dm-devel/2015-June/msg00160.html

this change should not be pushed to mainline yet.

Firstly, Christoph has a newer version of the patch that fixes silent
data corruption problem:
  https://www.redhat.com/archives/dm-devel/2015-May/msg00229.html

And the new version still depends on LLDDs to always complete requests
to the end when error happens, while block API doesn't enforce such a
requirement. If the assumption is ever broken, the inconsistency between
request and bio (e.g. rq->__sector and rq->bio) will cause silent data
corruption:
  https://www.redhat.com/archives/dm-devel/2015-June/msg00022.htmlReported-by: NJunichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

We export this function and NVMe wants to use it, but for some reason
it was never added to the block header. Do that.
Signed-off-by: NJens Axboe <axboe@fb.com>

blk_{set|clear}_queue_congested() take @q and set or clear,
respectively, the congestion state of its bdi's root wb.  Because bdi
used to be able to handle congestion state only on the root wb, the
callers of those functions tested whether the congestion is on the
root blkcg and skipped if not.

This is cumbersome and makes implementation of per cgroup
bdi_writeback congestion state propagation difficult.  This patch
renames blk_{set|clear}_queue_congested() to
blk_{set|clear}_congested(), and makes them take request_list instead
of request_queue and test whether the specified request_list is the
root one before updating bdi_writeback congestion state.  This makes
the tests in the callers unnecessary and simplifies them.

As there are no external users of these functions, the definitions are
moved from include/linux/blkdev.h to block/blk-core.c.

This patch doesn't introduce any noticeable behavior difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

With the planned cgroup writeback support, backing-dev related
declarations will be more widely used across block and cgroup;
unfortunately, including backing-dev.h from include/linux/blkdev.h
makes cyclic include dependency quite likely.

This patch separates out backing-dev-defs.h which only has the
essential definitions and updates blkdev.h to include it.  c files
which need access to more backing-dev details now include
backing-dev.h directly.  This takes backing-dev.h off the common
include dependency chain making it a lot easier to use it across block
and cgroup.

v2: fs/fat build failure fixed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NJens Axboe <axboe@fb.com>

We don't need to honor chunk sizes for IO that doesn't carry any
data.
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently dm-multipath has to clone the bios for every request sent
to the lower devices, which wastes cpu cycles and ties down memory.

This patch instead adds a new REQ_CLONE flag that instructs req_bio_endio
to not complete bios attached to a request, which we set on clone
requests similar to bios in a flush sequence.  With this change I/O
errors on a path failure only get propagated to dm-multipath, which
can then either resubmit the I/O or complete the bios on the original
request.

I've done some basic testing of this on a Linux target with ALUA support,
and it survives path failures during I/O nicely.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

lockdep gets unhappy about the not disabling irqs when using the queue_lock
around it.  Instead of trying to fix that up just switch to an atomic_t
and get rid of the lock.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

With commit ff36ab34 ("dm: remove request-based logic from
make_request_fn wrapper") DM no longer calls blk_queue_bio() directly,
so remove its export.  Doing so required a forward declaration in
blk-core.c.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This removes the request types and hacks from the block code and into the
old IDE driver.  There is a small amunt of code duplication due to this,
but it's not too bad.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

These values are only used by the IDE driver, so move them into it
by allowing drivers to take cmd_type values after the first private
one.  Note that we have to turn cmd_type into a plain unsigned integer
so that gcc doesn't complain about mismatching enum types.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

We don't have any arch specific scatterlist now that parisc switched over
to the generic one.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Make use of a new interface provided by iov_iter, backed by
scatter-gather list of iovec, instead of the old interface based on
sg_iovec. Also use iov_iter_advance() instead of manual iteration.

This commit should contain only literal replacements, without
functional changes.

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Signed-off-by: NKent Overstreet <kmo@daterainc.com>
[dpark: add more description in commit message]
Signed-off-by: NDongsu Park <dongsu.park@profitbricks.com>
[hch: fixed to do a deep clone of the iov_iter, and to properly use
      the iov_iter direction]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NJens Axboe <axboe@fb.com>