- 31 5月, 2008 1 次提交
-
-
由 Thomas Gleixner 提交于
arch/x86/kernel/mmconf-fam10h_64.c is missing the prototypes, which are decalred in arch/x86/kernel/setup_64.c. Move the prototypes and the inline stubs to the appropriate header file. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 26 5月, 2008 1 次提交
-
-
由 Sam Ravnborg 提交于
init/Kconfig contains a list of configs that are searched for if 'make *config' are used with no .config present. Extend this list to look at the config identified by ARCH_DEFCONFIG. With this change we now try the defconfig targets last. This fixes a regression reported by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
-
- 23 5月, 2008 8 次提交
-
-
由 Harvey Harrison 提交于
arch/x86/boot/printf.c:59:10: warning: Using plain integer as NULL pointer Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Jeremy's gcc 3.4 seems to be unable to inline a 8 byte memcpy. But the vdso doesn't support external references. Copy the structure members of struct timezone explicitely instead. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Beulich 提交于
While I realize that the function isn't currently being used, I still think an obvious mistake like this should be corrected. Signed-off-by: NJan Beulich <jbeulich@novell.com> Acked-by: NJeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Chuck Ebbert 提交于
A check for unmapped apic was added before reading maxlvt but the early read of maxlvt wasn't removed. Signed-off-by: NChuck Ebbert <cebbert@redhat.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
-
由 Thomas Gleixner 提交于
When the TSC calibration fails then TSC is still used in sched_clock(). Disable it completely in that case. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
-
由 Thomas Gleixner 提交于
tsc_enabled is set to 0 from the command line switch "notsc" and from the mark_tsc_unstable code. Seperate those functionalities and replace tsc_enable with tsc_disable. This makes also the native_sched_clock() decision when to use TSC understandable. Preparatory patch to solve the sched_clock() issue on 32 bit. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
When the TSC is calibrated against the PIT due to the nonavailability of PMTIMER/HPET or due to SMI interference then the setup of the per CPU cyc2ns variables is skipped. This is unlikely to happen but it would definitely render sched_clock() unusable. This was introduced with commit 53d517cd x86: scale cyc_2_nsec according to CPU frequency Update the per CPU cyc2ns variables in all exit pathes of tsc_calibrate. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
-
- 20 5月, 2008 3 次提交
-
-
由 maximilian attems 提交于
The longrun cpufreq module reports a false minimum frequency 3MHz on 300-600MHz Crusoe processor. This may be due to a calculation bug in the module. Original patch from Kaz Sasayama <kazssym@hypercore.co.jp> submitted as http://bugs.debian.org/468149 patch ported to x86 Cc: Kaz Sasayama <kazssym@hypercore.co.jp> Signed-off-by: Nmaximilian attems <max@stro.at> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Mark Langsdorf 提交于
The most common error with powernow-k8 is an ACPI _PSS error caused either by failure to load the ACPI processor module or a bad parse of the _PSS object. Make the error message returned to the user in these situations more straightforward and easier to understand. -Mark Langsdorf Operating System Research Center AMD Signed-off-by: NMark Langsdorf <mark.langsdorf@amd.com> Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Tony Camuso 提交于
Replace Redundant Whitelist Entries with the Correct Ones The ProLiant DL585 G2 and the DL585 G2 are entered reundantly in the dmi_system_id table. What should have been there are the DL360 and DL380. This patch simply replaces the redundant entries with the correct entries. Signed-off-by: NTony Camuso <tony.camuso@hp.com> Signed-off-by: NPat Schoeller <patrick.schoeller@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 18 5月, 2008 6 次提交
-
-
由 Marcelo Tosatti 提交于
Only use the APIC pending timers count to break out of HLT emulation if the timer vector is enabled. Certain configurations of Windows simply mask out the vector without disabling the timer. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Marcelo Tosatti 提交于
Otherwise hlt emulation fails if PIT is not injecting IRQ's. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
A register destination encoded with a mod=3 encoding left dst.ptr NULL. Normally we don't trap writes to registers, but in the case of smsw, we do. Fix by pointing dst.ptr at the destination register. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Thomas Gleixner 提交于
The previous revert of 0c07ee38 left out the mwait disable condition for AMD family 10H/11H CPUs. Andreas Herrman said: It depends on the CPU. For AMD CPUs that support MWAIT this is wrong. Family 0x10 and 0x11 CPUs will enter C1 on HLT. Powersavings then depend on a clock divisor and current Pstate of the core. If all cores of a processor are in halt state (C1) the processor can enter the C1E (C1 enhanced) state. If mwait is used this will never happen. Thus HLT saves more power than MWAIT here. It might be best to switch off the mwait flag for these AMD CPU families like it was introduced with commit f039b754 (x86: Don't use MWAIT on AMD Family 10) Re-add the AMD families 10H/11H check and disable the mwait usage for those. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Avi Kivity 提交于
pat_disable() is __init, which means it goes away after booting is complete. Unfortunately it is used by the hotplug code if the machine is not pat-capable, causing a crash. Fix by marking pat_disable() as __cpuinit. Signed-off-by: NAvi Kivity <avi@qumranet.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Vegard Nossum reports: | powertop shows between 200-400 wakeups/second with the description | "<kernel IPI>: Rescheduling interrupts" when all processors have load (e.g. | I need to run two busy-loops on my 2-CPU system for this to show up). | | The bisect resulted in this commit: | | commit 0c07ee38 | Date: Wed Jan 30 13:33:16 2008 +0100 | | x86: use the correct cpuid method to detect MWAIT support for C states remove the functional effects of this patch and make mwait unconditional. A future patch will turn off mwait on specific CPUs where that causes power to be wasted. Bisected-by: NVegard Nossum <vegard.nossum@gmail.com> Tested-by: NVegard Nossum <vegard.nossum@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 17 5月, 2008 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 14 5月, 2008 7 次提交
-
-
由 Roland McGrath 提交于
The user_regset_view table for the 32-bit regsets on the 64-bit build had the wrong sizes for the FP regsets. This bug had no user-visible effect (just on kernel modules using the user_regset interfaces and the like). But the fix is trivial and risk-free. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Pranith Kumar 提交于
fix this warning: arch/x86/mm/pat.c: In function `phys_mem_access_prot_allowed': arch/x86/mm/pat.c:558: warning: long long unsigned int format, long unsigned int arg (arg 6) arch/x86/mm/pat.c: In function `map_devmem': arch/x86/mm/pat.c:580: warning: long long unsigned int format, long unsigned int arg (arg 6) Signed-off-by: ND Pranith Kumar <bobby.prani@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Fix this symbol export problem: Building modules, stage 2. MODPOST 193 modules ERROR: "csum_partial" [fs/reiserfs/reiserfs.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 This is due to a known weakness of symbol exports: if a symbol's only in-core user is an EXPORT_SYMBOL from a lib-y section, the symbol is not linked in. The solution is to move the export to x8664_ksyms_64.c - but the real solution would be to fix kbuild. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Andrew Morton 提交于
arch/x86/kernel/setup_64.c:954: warning: passing argument 2 of 'set_bit' from incompatible pointer type Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Hugh Dickins 提交于
After resume on a 2cpu laptop, kernel builds collapse with a sed hang, sh or make segfault (often on 20295564), real-time signal to cc1 etc. Several hurdles to jump, but a manually-assisted bisect led to -rc1's d2bcbad5 x86: do not zap_low_mappings in __smp_prepare_cpus. Though the low mappings were removed at bootup, they were left behind (with Global flags helping to keep them in TLB) after resume or cpu online, causing the crashes seen. Reinstate zap_low_mappings (with local __flush_tlb_all) for each cpu_up on x86_32. This used to be serialized by smp_commenced_mask: that's now gone, but a low_mappings flag will do. No need for native_smp_cpus_done to repeat the zap: let mem_init zap BSP's low mappings just like on UP. (In passing, fix error code from native_cpu_up: do_boot_cpu returns a variety of diagnostic values, Dprintk what it says but convert to -EIO. And save_pg_dir separately before zap_low_mappings: doesn't matter now, but zapping twice in succession wiped out resume's swsusp_pg_dir.) That worked well on the duo and one quad, but wouldn't boot 3rd or 4th cpu on P4 Xeon, oopsing just after unlock_ipi_call_lock. The TLB flush IPI now being sent reveals a long-standing bug: the booting cpu has its APIC readied in smp_callin at the top of start_secondary, but isn't put into the cpu_online_map until just before that unlock_ipi_call_lock. So native_smp_call_function_mask to online cpus would send_IPI_allbutself, including the cpu just coming up, though it has been excluded from the count to wait for: by the time it handles the IPI, the call data on native_smp_call_function_mask's stack may well have been overwritten. So fall back to send_IPI_mask while cpu_online_map does not match cpu_callout_map: perhaps there's a better APICological fix to be made at the start_secondary end, but I wouldn't know that. Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Venki Pallipadi 提交于
Some versions of X used the mprotect workaround to change caching type from UC to WB, so that it can then use mtrr to program WC for that region [1]. Change the mmap of pci space through /sys or /proc interfaces from UC to UC_MINUS. With this change, X will not need to use mprotect workaround to get WC type since the MTRR mapping type will be honored. The bug in mprotect that clobbers PAT bits is fixed in a follow on patch. So, this X workaround will stop working as well. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Takashi Iwai 提交于
Rene Herman reported: > commit 8779f2fc > > "x86: don't try to allocate from DMA zone at first" > > breaks all of ISA DMA. Or all of ALSA ISA DMA at least. All > ISA soundcards are silent following that commit -- no error > messages, everything appears fine, just silence. That patch is buggy. We had an implicit assumption that dev = NULL for ISA devices that require 24bit DMA. The recent work on x86 dma_alloc_coherent() breaks the ISA DMA buffer allocation, which is represented by "dev = NULL" and requires 24bit DMA implicitly. Bisected-by: NRene Herman <rene.herman@keyaccess.nl> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 13 5月, 2008 3 次提交
-
-
由 Cyrill Gorcunov 提交于
To allow linker to catch sections overlapping we have to declare them in appropriate order. Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 James Bottomley 提交于
The phys_cpu_present_map is an expected symbol in the SMP harness. Unfortunately, x86 recently moved this and a few others to kernel/setup.c where it doesn't quite work because voyager has to define its own. Use CONFIG_X86_LOCAL_APIC to isolate these definitions and fix up another area in setup.c where CONFIG_X86_SMP should be used instead of CONFIG_SMP. Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: toralf.foerster@gmx.de Cc: Mike Travis <travis@sgi.com> Cc: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Takashi Iwai 提交于
Rene Herman reported: > commit 8779f2fc > > "x86: don't try to allocate from DMA zone at first" > > breaks all of ISA DMA. Or all of ALSA ISA DMA at least. All > ISA soundcards are silent following that commit -- no error > messages, everything appears fine, just silence. That patch is buggy. We had an implicit assumption that dev = NULL for ISA devices that require 24bit DMA. The recent work on x86 dma_alloc_coherent() breaks the ISA DMA buffer allocation, which is represented by "dev = NULL" and requires 24bit DMA implicitly. Bisected-by: NRene Herman <rene.herman@keyaccess.nl> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Tested-by: NRene Herman <rene.herman@keyaccess.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 11 5月, 2008 5 次提交
-
-
由 Ingo Molnar 提交于
select NEW_LEDS for now until the Kconfig dependencies have been fixed. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Helge Wagner 提交于
On some of our (single board computer) boards (x86) we are using an IPMI controller that uses I/O ports 0x62 and 0x66 for a KCS (keyboard controller style) IPMI system interface. Trying to load the openipmi driver fails, because the ports (0x62/0x66) are reserved for keyboard. keyboard reserves the full range 0x60-0x6F while it doesn't need to. Reserve only ports 0x60 and 0x64 for the legacy PS/2 i8042 keyboad controller instead of 0x60-0x6F to allow the openipmi driver to work. [ tglx: added 64bit fixup ] Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Suresh Siddha 提交于
If the task never used fpu, initialize the fpu before restoring the FP state from the signal handler context. This will allocate the fpu state, if the task never needed it before. Reported-and-bisected-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Tested-by: NEric Sesterhenn <snakebyte@gmx.de> Cc: Frederik Deweerdt <deweerdt@free.fr> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Yinghai Lu 提交于
Jeff Garzik pointed out that this printout is not needed. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
commit 62179849 x86: fix setup printk format warning is for linux-next and not for .26 Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 09 5月, 2008 1 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit 9f8dacca, which was reported to break X startup (xf86-video-ati-6.8.0). See http://bugs.freedesktop.org/show_bug.cgi?id=15523 for details. Reported-by: NLaurence Withers <l@lwithers.me.uk> Cc: Gary Hade <garyhade@us.ibm.com> Cc: Greg KH <greg@kroah.com> Cc: Jan Beulich <jbeulich@novell.com> Cc: "Jun'ichi Nomura" <j-nomura@ce.jp.nec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 5月, 2008 3 次提交
-
-
由 Thomas Gleixner 提交于
Move the scattered checks for PAT support to a single function. Its moved to addon_cpuid_features.c as this file is shared between 32 and 64 bit. Remove the manipulation of the PAT feature bit and just disable PAT in the PAT layer, based on the PAT bit provided by the CPU and the current CPU version/model white list. Change the boot CPU check so it works on Voyager somewhere in the future as well :) Also panic, when a secondary has PAT disabled but the primary one has alrady switched to PAT. We have no way to undo that. The white list is kept for now to ensure that we can rely on known to work CPU types and concentrate on the software induced problems instead of fighthing CPU erratas and subtle wreckage caused by not yet verified CPUs. Once the PAT code has stabilized enough, we can remove the white list and open the can of worms. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Andres Salomon 提交于
This moves geode_has_vsa2 into a .c file, caches the result we get from the VSA virtual registers, and causes the function to no longer be inline. [akpm@linux-foundation.org: cleanup] Signed-off-by: NAndres Salomon <dilinger@debian.org> Cc: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
commit e26a28d1 x86: olpc build fix was a fix to a patch that was withdrawn/delayed and then erroneously commited to x86.git. Revert it. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 07 5月, 2008 1 次提交
-
-
由 Stas Sergeev 提交于
fix pcspkr dependancies: make the pcspkr platform drivers to depend on a platform device, and not the other way around. Signed-off-by: NStas Sergeev <stsp@aknet.ru> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NDmitry Torokhov <dtor@mail.ru> CC: Vojtech Pavlik <vojtech@suse.cz> CC: Michael Opdenacker <michael-lists@free-electrons.com> [fixed for 2.6.26-rc1 by tiwai] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-