- 14 3月, 2013 4 次提交
-
-
由 Martin Hundebøll 提交于
Network coding exploits the 802.11 shared medium to allow multiple packets to be sent in a single transmission. In brief, a relay can XOR two packets, and send the coded packet to two destinations. The receivers can decode one of the original packets by XOR'ing the coded packet with the other original packet. This will lead to increased throughput in topologies where two packets cross one relay. In a simple topology with three nodes, it takes four transmissions without network coding to get one packet from Node A to Node B and one from Node B to Node A: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <--- p2 ---- Node R Node B 4. Node A Node R ---- p1 ---> Node B With network coding, the relay only needs one transmission, which saves us one slot of valuable airtime: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <- p1 x p2 - Node R - p1 x p2 -> Node B The same principle holds for a topology including five nodes. Here the packets from Node A and Node B are overheard by Node C and Node D, respectively. This allows Node R to send a network coded packet to save one transmission: Node A Node B | \ / | | p1 p2 | | \ / | p1 > Node R < p2 | | | / \ | | p1 x p2 p1 x p2 | v / \ v / \ Node C < > Node D More information is available on the open-mesh.org wiki[1]. This patch adds the initial code to support network coding in batman-adv. It sets up a worker thread to do house keeping and adds a sysfs file to enable/disable network coding. The feature is disabled by default, as it requires a wifi-driver with working promiscuous mode, and also because it adds a small delay at each hop. [1] http://www.open-mesh.org/projects/batman-adv/wiki/CatwomanSigned-off-by: NMartin Hundebøll <martin@hundeboll.net> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Antonio Quartulli 提交于
In C standard any expression different from 0 will be converted to 'true' when casting to bool (whatever is the length of the value). Therefore all the "!!" conversions can be removed. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Martin Hundebøll 提交于
batadv_check_unicast_packet() is changed to return a value based on the reason to drop the packet, which will be useful information for future users of batadv_check_unicast_packet(). Signed-off-by: NMartin Hundebøll <martin@hundeboll.net> Acked-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Marek Lindner 提交于
The batadv_priv struct carries a pointer to its own interface struct. Therefore, it is not necessary to retrieve the soft_iface via the primary interface. Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
- 12 3月, 2013 1 次提交
-
-
由 Marek Lindner 提交于
batadv_iv_ogm_process() accesses the packet using the tt_num_changes attribute regardless of the real packet len (assuming the length check was done before). Therefore a length check is needed to avoid reading random memory. Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
- 28 2月, 2013 1 次提交
-
-
由 Sasha Levin 提交于
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: NPeter Senna Tschudin <peter.senna@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 2月, 2013 1 次提交
-
-
由 Pau Koning 提交于
An entry in DAT with the hashed position of 0 can cause a NULL pointer dereference when the first entry is checked by batadv_choose_next_candidate. This first candidate automatically has the max value of 0 and the max_orig_node of NULL. Not checking max_orig_node for NULL in batadv_is_orig_node_eligible will lead to a NULL pointer dereference when checking for the lowest address. This problem was added in 785ea114 ("batman-adv: Distributed ARP Table - create DHT helper functions"). Signed-off-by: NPau Koning <paukoning@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 1月, 2013 1 次提交
-
-
由 Antonio Quartulli 提交于
The last-seen field has to be printed for all the local entries but the one marked with the no-purge flag Introduced by 15727323d9f8864b2d41930940acc38de987045a ("batman-adv: don't print the last_seen time for bat0 TT local entry") Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
- 27 1月, 2013 3 次提交
-
-
由 Matthias Schiffer 提交于
We never want multicast MAC addresses in the Distributed ARP Table, so it's best to completely ignore ARP packets containing them where we expect unicast addresses. Signed-off-by: NMatthias Schiffer <mschiffer@universe-factory.net> Acked-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Matthias Schiffer 提交于
There are more types of IP addresses that may appear in ARP packets that we don't want to process. While some of these should never appear in sane ARP packets, a 0.0.0.0 source is used for duplicate address detection and thus seen quite often. Signed-off-by: NMatthias Schiffer <mschiffer@universe-factory.net> Acked-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Matthias Schiffer 提交于
The callers of batadv_dat_snoop_incoming_arp_reply() assume the skb has been freed when it returns true; fix this by calling kfree_skb before returning as it is done in batadv_dat_snoop_incoming_arp_request(). Signed-off-by: NMatthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Acked-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
- 19 1月, 2013 13 次提交
-
-
由 Antonio Quartulli 提交于
Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Antonio Quartulli 提交于
Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Simon Wunderlich 提交于
When processing the unregister notify for a hard interface, removing the sysfs files may lead to a circular deadlock (rtnl mutex <-> s_active). To overcome this problem, postpone the sysfs removal in a worker. Reported-by: NSasha Levin <sasha.levin@oracle.com> Reported-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Akinobu Mita 提交于
Use more preferable function name which implies using a pseudo-random number generator. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Acked-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Cc: Antonio Quartulli <ordex@autistici.org> Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Marek Lindner 提交于
Thanks to Sven Eckelmann and Simon Wunderlich for their support. Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Marek Lindner 提交于
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Marek Lindner 提交于
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Marek Lindner 提交于
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Marek Lindner 提交于
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Marek Lindner 提交于
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Marek Lindner 提交于
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Marek Lindner 提交于
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Antonio Quartulli 提交于
A delayed_work struct does not need to be initialized each every time before being enqueued. Therefore the INIT_DELAYED_WORK() macro should be used during the initialization process only. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
- 12 1月, 2013 15 次提交
-
-
由 Marek Lindner 提交于
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Marek Lindner 提交于
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Antonio Quartulli 提交于
in bat_iv_ogm.c a debug message should print "tq" instead of "td" Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
The data argument in each hash function should carry the "const" qualifier as it is never modified. Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
When the Bridge Loop Avoidance component is not compiled-in, its boolean switch should be not compiled as well. This patch surrounds the switch with a proper ifdef. This behaviour was introduced by 9fd6b0615b5499b270d39a92b8790e206cf75833 ("batman-adv: add bridge loop avoidance compile option") Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Acked-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
debugfs_remove_recursive() checks whether its argument is not null on its own, therefore it is possible to remove the external check. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
Different hashes have the same class key because they get initialised with the same one. For this reason lockdep can create false warning when they are used recursively. Re-initialise the key for each hash after the invocation to hash_new() to avoid this problem. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Tested-by: NLinus Lüssing <linus.luessing@web.de> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
The flag field of the tt_local_entry->common structure in tt_local_add() is first assigned NO_FLAGS and then TT_CLIENT_NEW so nullifying the first operation. For this reason it is safe to remove the first assignment. This was introuduced by ("batman-adv: keep local table consistency for further TT_RESPONSE") Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
Values are printed in hexadecimal format in several points in the code, but they are not printed using the same format string. This patches unifies the format used for such numbers so that they look the same everywhere. Given the fact that all the variables printed as hexadecimal are 16 bit long, this is the chosen printing format: %#.4x Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
To simplify debugging operations, it is better to print the related CRC together with the translation table (local CRC for the local table and global CRC for each entry in the global table) Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
This patch adds a nice header to the local translation table and the last_seen time for each local entry Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
The current timeout is set to one hour. However a client connected to the mesh network will always generate traffic. In the worst case it will send ARP requests every 4 or 5 minutes. On the other hand having a long timeout means storing dead entries for one hour and it leads to very big trans-tables containing useless clients. This patch reduces the timeout to 10 minutes Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Linus Lüssing 提交于
The current translation table mechanism is not suitable for multicast addresses and we are currently flooding such frames anyway. Therefore this patch prevents multicast MAC addresses being added to the translation table. Signed-off-by: NLinus Lüssing <linus.luessing@web.de> Acked-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Shan Wei 提交于
this_cpu_add is an atomic operation. and be more faster than per_cpu_ptr operation. Signed-off-by: NShan Wei <davidshan@tencent.com> Reviewed-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
- 07 1月, 2013 1 次提交
-
-
由 Jiri Pirko 提交于
Use strlcpy where possible to ensure the string is \0 terminated. Use always sizeof(string) instead of 32, ETHTOOL_BUSINFO_LEN and custom defines. Use snprintf instead of sprint. Remove unnecessary inits of ->fw_version Remove unnecessary inits of drvinfo struct. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-