Cisco Aironet doesn't resume properly from swsusp, because the resume
method confuses a PM_EVENT_* for a PCI power state. It thinks that it is
resuming from PCI_D1 and doesn't do the necessary initialization of the
card.
Signed-off-by: NMichal Schmidt <xschmi00@stud.feec.vutbr.cz>

Fixes bus address truncation bug for certain configs.

this patch display the correct channel number with iwlist scan
Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

	Dan Williams already included most parts of my WE-19 patch for
the airo driver in the kernel. There was just a few bits he could not
do because WE-19 itself was not in the kernel. Those are the missing
bits.
        Tested with 2.6.13 (with real HW).
Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

This adds type-checking to pm_message_t, so that people can't confuse it
with int or u32.  It also allows us to fix "disk yoyo" during suspend (disk
spinning down/up/down).

[We've tried that before; since that cpufreq problems were fixed and I've
tried make allyes config and fixed resulting damage.]
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAlexander Nyberg <alexn@telia.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Since the patch to add a NULL short-circuit to crypto_free_tfm() went in,
there's no longer any need for callers of that function to check for NULL.
This patch removes the redundant NULL checks and also a few similar checks
for NULL before calls to kfree() that I ran into while doing the
crypto_free_tfm bits.

I've succesfuly compile tested this patch, and a kernel with the patch 
applied boots and runs just fine.

When I posted the patch to LKML (and other lists/people on Cc) it drew the
following comments :

 J. Bruce Fields commented
  "I've no problem with the auth_gss or nfsv4 bits.--b."

 Sridhar Samudrala said
  "sctp change looks fine."

 Herbert Xu signed off on the patch.

So, I guess this is ready to be dropped into -mm and eventually mainline.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch goes through the current users of the crypto layer and sets
CRYPTO_TFM_REQ_MAY_SLEEP at crypto_alloc_tfm() where all crypto operations
are performed in process context.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

`gcc -W' likes to complain if the static keyword is not at the beginning of
the declaration.  This patch fixes all remaining occurrences of "inline
static" up with "static inline" in the entire kernel tree (140 occurrences in
47 files).

While making this change I came across a few lines with trailing whitespace
that I also fixed up, I have also added or removed a blank line or two here
and there, but there are no functional changes in the patch.
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is part of the grand scheme to eliminate the qlen
member of skb_queue_head, and subsequently remove the
'list' member of sk_buff.

Most users of skb_queue_len() want to know if the queue is
empty or not, and that's trivially done with skb_queue_empty()
which doesn't use the skb_queue_head->qlen member and instead
uses the queue list emptyness as the test.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This conversion makes code from line 7101 right:
	if (copy_to_user(com.data, swversion, sizeof(swversion)))

size output (before, after):
  55416    2228     160   57804    e1cc drivers/net/wireless/airo.o
  55412    2228     160   57800    e1c8 drivers/net/wireless/airo.o

more outputs from Alexey Dobriyan:
2.95.3:
           text    data     bss     dec     hex filename
before    51118    2156     160   53434    d0ba drivers/net/wireless/airo.o
after     51118    2156     160   53434    d0ba drivers/net/wireless/airo.o

3.3.5-20050130:
before    46999    2156     160   49315    c0a3 drivers/net/wireless/airo.o
after     46994    2156     160   49310    c09e drivers/net/wireless/airo.o

4.1.0-20050522:
before    45555    2220     160   47935    bb3f drivers/net/wireless/airo.o
after     45550    2220     160   47930    bb3a drivers/net/wireless/airo.o
Signed-off-by: NDomen Puncer <domen@coderock.org>

Fix int vs. pm_message_t confusion in airo. Should change no code.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

1. Establish a simple API for process freezing defined in linux/include/sched.h:

   frozen(process)		Check for frozen process
   freezing(process)		Check if a process is being frozen
   freeze(process)		Tell a process to freeze (go to refrigerator)
   thaw_process(process)	Restart process
   frozen_process(process)	Process is frozen now

2. Remove all references to PF_FREEZE and PF_FROZEN from all
   kernel sources except sched.h

3. Fix numerous locations where try_to_freeze is manually done by a driver

4. Remove the argument that is no longer necessary from two function calls.

5. Some whitespace cleanup

6. Clear potential race in refrigerator (provides an open window of PF_FREEZE
   cleared before setting PF_FROZEN, recalc_sigpending does not check
   PF_FROZEN).

This patch does not address the problem of freeze_processes() violating the rule
that a task may only modify its own flags by setting PF_FREEZE. This is not clean
in an SMP environment. freeze(process) is therefore not SMP safe!
Signed-off-by: NChristoph Lameter <christoph@lameter.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch brings the airo driver into line with the current
WEXT specification of signal quality.  It also fixes the values
used to determine signal quality and level for MPI & PCMCIA 350
cards.  It turns out that BSSListRid.rssi was actually in dBm
for 350 series cards, and that we can use the normalized
signal strength reported by the card as our "quality" value, on
a scale of 0 - 100.  Since signal level values are in dBm for
this driver, max_qual->level MUST be 0, as specified in the WEXT
spec.  This patch also uses the IW_QUAL constants new in WEXT
version 17.
Signed-off-by: NDan Williams <dcbw@redhat.com>

Includes minor cleanups from Adrian Bunk <bunk@stusta.de>.

This fixes remaining u32s in drivers/ net.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!