- 12 7月, 2006 8 次提交
-
-
由 Heiko Carstens 提交于
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
1. Multipath devices for which SetPGID is not supported are not handled well. Use NOP ccws for path verification (sans path grouping) when SetPGID is not supported. 2. Check for PGIDs already set with SensePGID on _all_ paths (not just the first one) and try to find a common one. Moan if no common PGID can be found (and use NOP verification). If no PGIDs have been set, use the css global PGID (as before). (Rationale: SetPGID will get a command reject if the PGID it tries to set does not match the already set PGID.) 3. Immediately before reboot, issue RESET CHANNEL PATH (rcp) on all chpids. This will remove the old PGIDs. rcp will generate solicited CRWs which can be savely ignored by the machine check handler (all other actions create unsolicited CRWs). Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
The module parameters for xpram are not or in a wrong way parsed. The xpram module uses the module_param_array directive with an int parameter which causes the kernel to automatically parse the passed numbers. This will cause errors if arguments are omitted or cause wrong results if arguments have size qualifiers. Use module_param_array with charp and parse the arguments later. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
futex_atomic_cmpxchg_inatomic has the same bug as the other atomic futex operations: the operation needs to be done in the user address space, not the kernel address space. Add the missing sacf 256 & sacf 0. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Add a reg_mutex to prevent unregistering a subchannel before it has been registered. Since 2.6.17, we've seen oopses in kslowcrw when a device is found to be not operational during sense id when doing initial device recognition; it is not clear yet why that particular problem was not (yet) observed with earlier kernels... Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Make sure that raw_local_save_flags and raw_local_irq_restore always get an unsigned long parameter. raw_irqs_disabled should call raw_local_save_flags instead of local_save_flags. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
__builtin_trap() has the archictecture defined backend in gcc since gcc 3.3. To make sure the kernel builds with gcc 3.2 as well, use the old style BUG() statement if compiled with older gcc versions. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 11 7月, 2006 32 次提交
-
-
由 Linus Torvalds 提交于
The MacMini board table seems to largely look like any bog-standard Intel 945 board. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: ACPI_DOCK: Initialize the atomic notifier list ACPI: acpi_os_allocate() fixes ACPI: SBS: fix initialization, sem2mutex ACPI: add 'const' to several ACPI file_operations ACPI: delete some defaults from ACPI Kconfig ACPI: "Device `[%s]' is not power manageable" make message debug only ACPI: ACPI_DOCK Kconfig Revert "Revert "ACPI: dock driver"" ACPI: acpi_os_get_thread_id() returns current ACPI: ACPICA 20060707
-
由 Linus Torvalds 提交于
* HEAD: [DCCP]: Fix sparse warnings. [TCP]: Remove TCP Compound [BPQ] lockdep: fix false positive [IPV4] inetpeer: Get rid of volatile from peer_total [AX.25]: Get rid of the last volatile.
-
由 Andi Kleen 提交于
We can't safely directly access an compat_alloc_user_space() pointer with the siginfo copy functions. Bounce it through the stack. Noticed by Al Viro using sparse [ This was only added post 2.6.17, not in any released kernel ] Cc: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Add it for P4 model 6 - reported to work and have a similar PMU to earlier P4s. Add an p4force=1 module override parameter for future use. We had a discussion about that earlier - it's a trade off between the PMU staying compatible or not. I think the force parameter is a reasonable compromise. Cc: oprofile-list@lists.sf.net Cc: Asit Mallick <asit.k.mallick@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
No need for video to be always in No need for smart battery driver to be always in Acked-by: NLen Brown <len.brown@intel.com> Cc: linux-acpi@vger.kernel.org Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Muli Ben-Yehuda 提交于
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: NJon Mason <jdmason@us.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Muli Ben-Yehuda 提交于
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: NJon Mason <jdmason@us.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jacob Shin 提交于
Signed-off-by: NJacob Shin <jacob.shin@amd.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Markus Schoder 提交于
Currently ia32 binaries behave differently with respect to enabling READ_IMPLIES_EXEC. On i386 a binary with the exec_stack flag set is executed with READ_IMPLIES_EXEC enabled as well. The same binary executes without READ_IMPLIES_EXEC on x86-64. This causes binaries that work on i386 to fail on x86-64 which goes somewhat against the whole 32 bit emulation idea. It has been argued that READ_IMPLIES_EXEC should not be enabled at all for binaries that have the exec_stack flag. Which is probably a valid point. However until this is clarified I think x86-64 should behave the same for ia32 binaries as i386. The following patch brings x86-64 in sync with i386 for ia32 binaries. Signed-off-by: NMarkus Schoder <lists@gammarayburst.de> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alan Cox 提交于
No actual bugs that I can see just a couple of unmarked casts getting annoying in my debug log files. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This reverts: f890f921 The inclusion of TCP Compound needs to be reverted at this time because it is not 100% certain that this code conforms to the requirements of Developer's Certificate of Origin 1.1 paragraph (b). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
Bpqether is encapsulating AX.25 frames into ethernet frames. There is a virtual bpqether device paired with each ethernet devices, so it's normal to pass through dev_queue_xmit twice for each frame which triggers the locking detector. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The variable peer_total is protected by a lock. The volatile marker makes no sense. This shaves off 20 bytes on i386. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
This volatile makes no sense - not even wearing pink shades ... Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shankar Anand 提交于
Add an nfs4 operations count array to nfsd_stats structure. The count is incremented in nfsd4_proc_compound() where all the operations are handled by the nfsv4 server. This count of individual nfsv4 operations is also entered into /proc filesystem. Signed-off-by: Shankar Anand<shanand@novell.com> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric Sesterhenn 提交于
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Arjan van de Ven 提交于
Disable lockdep debugging in two situations where the integrity of the kernel no longer is guaranteed: when oopsing and when hitting a tainting-condition. The goal is to not get weird lockdep traces that don't make sense or are otherwise undebuggable, to not waste time. Lockdep assumes that the previous state it knows about is valid to operate, which is why lockdep turns itself off after the first violation it reports, after that point it can no longer make that assumption. A kernel oops means that the integrity of the kernel compromised; in addition anything lockdep would report is of lesser importance than the oops. All the tainting conditions are of similar integrity-violating nature and also make debugging/diagnosing more difficult. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Update Documentation/SubmitChecklist. - Mention lockdep coverage - Describe documentation requirements - Number the various items to simplify the composition of caustic emails. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
Add a proper prototype for i2o_parm_issue() in core.h. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Hellwig 提交于
As announced half a year ago this patch will remove the tasklist_lock export. The previous two patches got rid of the remaining modular users. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Heiko Carstens 提交于
Remove BINFMT_ELF32 config option. Support should be always compiled in if CONFIG_COMPAT is set. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Hellwig 提交于
Currently most architectures either always build binfmt_elf32 in the kernel image or make it a boolean option. Only sparc64 and s390 allow to build it modularly. This patch turns the option into a boolean aswell because elf requires various symbols that shouldn't be available to modules. The most urgent one is tasklist_lock whos export this patch series kills, but there are others like force_sgi aswell. Note that sparc doesn't allow a modular 32bit a.out handler either, and that would be the more useful case as only few people want 32bit sunos compatibility and 99.9% of all sparc64 users need 32bit linux native elf support. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: N"David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Hellwig 提交于
Currently the snsc driver uses force_sig to send init a SIGPWR when the system overheats. This patch switches it to kill_proc instead which has the following advantages: (1) gets rid of one of the last remaining tasklist_lock users in modular code (2) simplifies the snsc code significantly The downside is that an init implementation could in theory block SIGPWR and it would not get delivered. The sysvinit code used by all major distributions doesn't do this and blocking this signal in init would be a rather stupid thing to do. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jim Cromie 提交于
- Switch from register_chrdev() to (register|alloc)_chrdev_region(). - use a cdev. This was intended for original patchset, but was overlooked. We use a single cdev for all pins (minor device-numbers), as gleaned from cs5535_gpio, and in contrast to whats currently done in scx200_gpio (which I'll fix soon) Signed-off-by: NJim Cromie <jim.cromie@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jim Cromie 提交于
Fix module-init-func by repairing usage of platform_device_del/put in module-exit-func. IOW, it imitates Ingo's 'mishaps' patch, which fixed the module-init-func's undo handling. Also fixes lack of release_region to undo the earlier registration. Also starts to 'use a cdev' which was originally intended (its present in scx200_gpio). Code compiles and runs, exhibits a lesser error than previously. (re-register-chrdev fails) Since I had to add "include <linux/cdev.h>", I went ahead and made 2 tweaks that fell into diff-context-window: - remove include <linux/config.h> everyone's doing it - copyright updates - current date is 'wrong' Signed-off-by: NJim Cromie <jim.cromie@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jim Cromie 提交于
add constant defines - preparatory patch - adds #define CONSTs for max-pin, gpio-addr-range (for reserving region) - fix wrong max-pin check in gpio_open() - add 'Winbond' to module description. NSC sold the product, Winbond has supported us / lm-sensors Signed-off-by: NJim Cromie <jim.cromie@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chris Boot 提交于
Add LED Class device support for the Soekris net48xx Error LED. Tested only on a net4801, but should work on a net4826 as well. I'd love to find a way of detecting a Soekris net48xx device but there is no DMI or any Soekris-specific PCI devices. [akpm@osdl.org: fixlets, cleanups] Signed-off-by: NChris Boot <bootc@bootc.net> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andreas Gruenbacher 提交于
These functions no longer exist; remove their declarations. Signed-off-by: NAndreas Gruenbacher <agruen@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric Sesterhenn 提交于
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
allyesconfig vmlinux size delta: text data bss dec filename 20736884 6073834 3075176 29885894 vmlinux.before 20721009 6073966 3075176 29870151 vmlinux.after ~18 bytes per callsite, 15K of text size (~0.1%) saved. (as an added bonus this also removes a lockdep annotation.) Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-