The update_rate attribute can be used by drivers to let userspace choose
the update rate of the chip, if it is configurable.
Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The lm90 driver programs the sensor chip to update its readings at 2 Hz
(500 ms between readings). However, the driver only does reads from the
chip at intervals of 2 * HZ (2000 ms between readings). Change the driver
update rate to the programmed update rate.
Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Acquire the I/O region for the Super I/O chip while we're working on it.
Signed-off-by: NGiel van Schijndel <me@mortis.eu>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Some code cleanup: properly use previously defined functions, rather
than duplicating their code.
Signed-off-by: NGiel van Schijndel <me@mortis.eu>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Use the strict_strol and strict_stroul functions instead of simple_strol
and simple_stroul respectively in sysfs functions.
Signed-off-by: NGiel van Schijndel <me@mortis.eu>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Fixed several coding style issues.
Signed-off-by: NGiel van Schijndel <me@mortis.eu>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The LM64 appears to be an LM63 with added GPIO lines. Add support for the
hwmon functionality - GPIO can be added at some later stage if someone
has a need for them.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

When the user passes the kernel parameter acpi_enforce_resources=lax,
the ACPI resources are no longer protected, so a native driver can
make use of them. In that case, we do not want the asus_atk0110 to be
loaded. Unfortunately, this driver loads automatically due to its
MODULE_DEVICE_TABLE, so the user ends up with two drivers loaded for
the same device - this is bad.

So I suggest that we prevent the asus_atk0110 driver from loading if
acpi_enforce_resources=lax.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NLuca Tettamanti <kronos.it@gmail.com>
Cc: Len Brown <lenb@kernel.org>

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  agp: amd64, fix pci reference leaks
  drm/edid: Allow non-fatal checksum errors in CEA blocks
  drm/radeon/kms: suppress a build warning (unused variable)
  drm: Fixes linux-next & linux-2.6 checkstack warnings:
  nouveau: fix acpi_lid_open undefined
  drm/radeon/kms: release AGP bridge at suspend

I/O errors can happen due to temporary failures, like multipath
errors or losing network contact with the iSCSI server. Because
of that, the VM will retry readpage on the page.

However, do_generic_file_read does not clear PG_error.  This
causes the system to be unable to actually use the data in the
page cache page, even if the subsequent readpage completes
successfully!

The function filemap_fault has had a ClearPageError before
readpage forever.  This patch simply adds the same to
do_generic_file_read.
Signed-off-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NRik van Riel <riel@redhat.com>
Acked-by: NLarry Woodman <lwoodman@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
  squashfs: update documentation to include description of xattr layout
  squashfs: fix name reading in squashfs_xattr_get
  squashfs: constify xattr handlers
  squashfs: xattr fix sparse warnings
  squashfs: xattr_lookup sparse fix
  squashfs: add xattr support configure option
  squashfs: add new extended inode types
  squashfs: add support for xattr reading
  squashfs: add xattr id support

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: roccat: fix build failure if built as module
  HID: roccat: propagate special events of roccat hardware to userspace
  HID: Add the GYR4101US USB ID to hid-gyration
  HID: fix hid-roccat-kone for bin_attr API change

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: emu10k1: allow high-resolution mixer controls
  ALSA: pcm: fix delta calculation at boundary wraparound
  ALSA: hda_intel: fix handling of non-completion stream interrupts
  ALSA: usb/caiaq: fix Traktor Kontrol X1 ABS_HAT2X axis
  ALSA: hda: Fix model quirk for Dell M1730
  ALSA: hda - iMac9,1 sound fixes
  ALSA: hda: Use LPIB for Toshiba A100-259
  ALSA: hda: Use LPIB for Acer Aspire 5110
  ALSA: aw2-alsa.c: use pci_ids.h defines and fix checkpatch.pl noise
  ALSA: usb-audio: add support for Akai MPD16
  ALSA: pcm: fix the fix of the runtime->boundary calculation

This reverts commit b3b77c8c, which was
also totally broken (see commit 0d2daf5c that reverted the crc32
version of it).  As reported by Stephen Rothwell, it causes problems on
big-endian machines:

> In file included from fs/jfs/jfs_types.h:33,
>                  from fs/jfs/jfs_incore.h:26,
>                  from fs/jfs/file.c:22:
> fs/jfs/endian24.h:36:101: warning: "__LITTLE_ENDIAN" is not defined

The kernel has never had that crazy "__BYTE_ORDER == __LITTLE_ENDIAN"
model.  It's not how we do things, and it isn't how we _should_ do
things.  So don't go there.
Requested-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It doesn't work on big-endian - those architectures don't define
__LITTLE_ENDIAN.

Cc: Joakim Tjernlund <joakim.tjernlund@transmode.se>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fs/fscache/object-list.c: In function 'fscache_objlist_lookup':
fs/fscache/object-list.c:105: warning: cast to pointer from integer of different size
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Slightly rearrange the logic that determines capabilities and vm_flags.
Disable BDI_CAP_MAP_DIRECT in all cases if the device can't support the
protections.  Allow private readonly mappings of readonly backing devices.
Signed-off-by: NBernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NDavid McCullough <davidm@snapgear.com>
Acked-by: NGreg Ungerer <gerg@uclinux.org>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: NDavid Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The original code called mpol_put(new) while "new" was an ERR_PTR.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Stanse found pci reference leaks in uli_agp_init and nforce3_agp_init
initialization functions.

The PCI devices are bridges, so it's not critical, but still worth fixing.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Switches will try to update the topology address and not correctly fix
up the checksum, so just let it slide.

https://bugs.freedesktop.org/28229Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

At least 'make CONFIG_DEBUG_SECTION_MISMATCH=y' causes
drivers/gpu/drm/radeon/atombios_crtc.c: In function 'atombios_crtc_set_pll':
drivers/gpu/drm/radeon/atombios_crtc.c:684: warning: 'pll' may be used uninitialized in this function
which has the looks of a falso positive.

Add a default: case so that gcc rests assured that all possible pll_id's are covered.
Keep the present cases that fall through to the default one for self-documentation.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NPhillip Lougher <phillip@lougher.demon.co.uk>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (63 commits)
  drivers/net/usb/asix.c: Fix pointer cast.
  be2net: Bug fix to avoid disabling bottom half during firmware upgrade.
  proc_dointvec: write a single value
  hso: add support for new products
  Phonet: fix potential use-after-free in pep_sock_close()
  ath9k: remove VEOL support for ad-hoc
  ath9k: change beacon allocation to prefer the first beacon slot
  sock.h: fix kernel-doc warning
  cls_cgroup: Fix build error when built-in
  macvlan: do proper cleanup in macvlan_common_newlink() V2
  be2net: Bug fix in init code in probe
  net/dccp: expansion of error code size
  ath9k: Fix rx of mcast/bcast frames in PS mode with auto sleep
  wireless: fix sta_info.h kernel-doc warnings
  wireless: fix mac80211.h kernel-doc warnings
  iwlwifi: testing the wrong variable in iwl_add_bssid_station()
  ath9k_htc: rare leak in ath9k_hif_usb_alloc_tx_urbs()
  ath9k_htc: dereferencing before check in hif_usb_tx_cb()
  rt2x00: Fix rt2800usb TX descriptor writing.
  rt2x00: Fix failed SLEEP->AWAKE and AWAKE->SLEEP transitions.
  ...

* 'alpha-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
  alpha: simplify and optimize sched_find_first_bit
  alpha: invoke oom-killer from page fault
  Convert alpha to use clocksources instead of arch_gettimeoffset

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  driver core: add devname module aliases to allow module on-demand auto-loading

This reverts commit 480b02df, since
Rafael reports that it causes occasional kernel paging request faults in
load_module().

Dropping the module lock and re-taking it deep in the call-chain is
definitely not the right thing to do.  That just turns the mutex from a
lock into a "random non-locking data structure" that doesn't actually
protect what it's supposed to protect.
Requested-and-tested-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Brandon Philips <brandon@ifup.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Stephen Rothwell reports the following new warning:

drivers/net/usb/asix.c: In function 'asix_rx_fixup':
drivers/net/usb/asix.c:325: warning: cast from pointer to integer of different size
drivers/net/usb/asix.c:354: warning: cast from pointer to integer of different size

The code just cares about the low alignment bits, so use
an "unsigned long" cast instead of one to "u32".
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Certain firmware commands/operations to upgrade firmware could take several
seconds to complete. The code presently disables bottom half during these
operations which could lead to unpredictable behaviour in certain cases. This
patch now does all firmware upgrade operations asynchronously using a
completion variable.
Signed-off-by: NSarveshwar Bandi <sarveshwarb@serverengines.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit 00b7c339
"sysctl: refactor integer handling proc code"
modified the behaviour of writing to /proc.
Before the commit, write("1\n") to /proc/sys/kernel/printk succeeded. But
now it returns EINVAL.

This commit supports writing a single value to a multi-valued entry.
Signed-off-by: NJ. R. Okajima <hooanon05@yahoo.co.jp>
Reviewed-and-tested-by: NWANG Cong <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a few new product id's for the hso driver.
Signed-off-by: NFilip Aben <f.aben@option.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sk_common_release() might destroy our last reference to the socket.
So an extra temporary reference is needed during cleanup.
Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Search only the first 100 bits instead of 140, saving a couple
instructions. The resulting code is about 1/3 faster (40K ticks/1000
iterations down to 30K ticks/1000 iterations).

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: linux-alpha@vger.kernel.org
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

As explained in commit 1c0fe6e3, we want to call the architecture
independent oom killer when getting an unexplained OOM from
handle_mm_fault, rather than simply killing current.

[mattst88: kill now unused 'survive' label]
Cc: linux-alpha@vger.kernel.org
Cc: Richard Henderson <rth@twiddle.net>
Cc: linux-arch@vger.kernel.org
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NNick Piggin <npiggin@suse.de>

Alpha has a tsc like rpcc counter that it uses to manage time.
This can be converted to an actual clocksource instead of utilizing
the arch_gettimeoffset method that is really only there for legacy
systems with no continuous counter.

Further cleanups could be made if alpha converted to the clockevent
model.

CC: Thomas Gleixner <tglx@linutronix.de>
CC: Richard Henderson <rth@twiddle.net>
Acked-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Tested-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NJohn Stultz <johnstul@us.ibm.com>

This adds:
  alias: devname:<name>
to some common kernel modules, which will allow the on-demand loading
of the kernel module when the device node is accessed.

Ideally all these modules would be compiled-in, but distros seems too
much in love with their modularization that we need to cover the common
cases with this new facility. It will allow us to remove a bunch of pretty
useless init scripts and modprobes from init scripts.

The static device node aliases will be carried in the module itself. The
program depmod will extract this information to a file in the module directory:
  $ cat /lib/modules/2.6.34-00650-g537b60d1-dirty/modules.devname
  # Device nodes to trigger on-demand module loading.
  microcode cpu/microcode c10:184
  fuse fuse c10:229
  ppp_generic ppp c108:0
  tun net/tun c10:200
  dm_mod mapper/control c10:235

Udev will pick up the depmod created file on startup and create all the
static device nodes which the kernel modules specify, so that these modules
get automatically loaded when the device node is accessed:
  $ /sbin/udevd --debug
  ...
  static_dev_create_from_modules: mknod '/dev/cpu/microcode' c10:184
  static_dev_create_from_modules: mknod '/dev/fuse' c10:229
  static_dev_create_from_modules: mknod '/dev/ppp' c108:0
  static_dev_create_from_modules: mknod '/dev/net/tun' c10:200
  static_dev_create_from_modules: mknod '/dev/mapper/control' c10:235
  udev_rules_apply_static_dev_perms: chmod '/dev/net/tun' 0666
  udev_rules_apply_static_dev_perms: chmod '/dev/fuse' 0666

A few device nodes are switched to statically allocated numbers, to allow
the static nodes to work. This might also useful for systems which still run
a plain static /dev, which is completely unsafe to use with any dynamic minor
numbers.

Note:
The devname aliases must be limited to the *common* and *single*instance*
device nodes, like the misc devices, and never be used for conceptually limited
systems like the loop devices, which should rather get fixed properly and get a
control node for losetup to talk to, instead of creating a random number of
device nodes in advance, regardless if they are ever used.

This facility is to hide the mess distros are creating with too modualized
kernels, and just to hide that these modules are not compiled-in, and not to
paper-over broken concepts. Thanks! :)

Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-Off-By: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (103 commits)
  ARM: 6141/1: Add audio support part in arch/arm/mach-w90x900
  ARM: 5939/1: ARM: Add option CMDLINE_FORCE to force usage of the in-kernel cmdline
  ARM: 6140/1: silence a bogus sparse warning in unwind.c
  ARM: mach-at91: duplicated include
  ARM: arch/arm/nwfpe/fpsr.h: Checkpatch cleanup
  ARM: arch/arm/mach-shark/pci.c: Checkpatch cleanup
  ARM: arch/arm/nwfpe/ChangeLog: Checkpatch cleanup
  ARM: arch/arm/mach-sa1100/leds.c: Checkpatch cleanup
  ARM: arch/arm/mach-h720x/common.h: Checkpatch cleanup
  ARM: arch/arm/mach-footbridge/ebsa285-pci.c: Checkpatch cleanup
  ARM: arch/arm/mach-clps711x/Makefile.boot: Checkpatch cleanup
  ARM: arch/arm/boot/bootp/bootp.lds: Checkpatch cleanup
  ARM: SPEAR6xx: remove duplicated #include
  ARM: s3c6400_defconfig: Add NAND driver
  ARM: s3c6400_defconfig: enable sound as modules
  ARM: s3c6400_defconfig: enable power management
  ARM: s5pv210_defconfig: Update s5pv210_defconfig to v2.6.34
  ARM: s5pc110_defconfig: Update s5pc110_defconfig to v2.6.34
  ARM: s5p6442_defconfig: Update s5p6442_defconfig to v2.6.34
  ARM: s5p6440_defconfig: Update s5p6440_defconfig to v2.6.34
  ...