This patch is preparation for replacing most uses of
".bss.page_aligned" and ".data.page_aligned" in the kernel with
macros, so that the section name can later be changed without having
to touch a lot of the kernel.

The long-term goal here is to be able to change the kernel's magic
section names to those that are compatible with -ffunction-sections
-fdata-sections.  This requires renaming all magic sections with names
of the form ".data.foo".
Signed-off-by: NTim Abbott <tabbott@ksplice.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

RW_DATA_SECTION is defined to take 4 different alignment parameters,
while NOSAVE_DATA currently uses a fixed PAGE_SIZE alignment as noted
in the comments.

There are presently no in-tree users of this at present, and I just
stumbled across this while implementing the simplified script on a new
architecture port, which subsequently resulted in a syntax error.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: misc small cleanups
  amd64_edac: fix ecc_enable_override handling
  amd64_edac: check only ECC bit in amd64_determine_edac_cap

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (29 commits)
  powerpc/rtas: Fix watchdog driver temperature read functionality
  powerpc/mm: Fix potential access to freed pages when using hugetlbfs
  powerpc/440: Fix warning early debug code
  powerpc/of: Fix usage of dev_set_name() in of_device_alloc()
  powerpc/pasemi: Use raw spinlock in SMP TB sync
  powerpc: Use one common impl. of RTAS timebase sync and use raw spinlock
  powerpc/rtas: Turn rtas lock into a raw spinlock
  powerpc: Add irqtrace support for 32-bit powerpc
  powerpc/BSR: Fix BSR to allow mmap of small BSR on 64k kernel
  powerpc/BSR: add 4096 byte BSR size
  powerpc: Map more memory early on 601 processors
  powerpc/pmac: Fix DMA ops for MacIO devices
  powerpc/mm: Make k(un)map_atomic out of line
  powerpc: Fix mpic alloc warning
  powerpc: Fix output from show_regs
  powerpc/pmac: Fix issues with PowerMac "PowerSurge" SMP
  powerpc/amigaone: Limit ISA I/O range to 4k in the device tree
  powerpc/warp: Platform fix for i2c change
  powerpc: Have git ignore generated files from dtc compile
  powerpc/mpic: Fix mapping of "DCR" based MPIC variants
  ...

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: video: prevent NULL deref in acpi_get_pci_dev()
  eeepc-laptop: add rfkill support for the 3G modem in Eee PC 901 Go
  eeepc-laptop: get the right value for CMSG
  eeepc-laptop: makes get_acpi() returns -ENODEV
  eeepc-laptop: right parent device
  eeepc-laptop: rfkill refactoring
  eeepc-laptop.c: use pr_fmt and pr_<level>
  eeepc-laptop: Register as a pci-hotplug device

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] remove unknown mount option warning message
  [CIFS] remove bkl usage from umount begin
  cifs: Fix incorrect return code being printed in cFYI messages
  [CIFS] cleanup asn handling for ntlmssp
  [CIFS] Copy struct *after* setting the port, instead of before.
  cifs: remove rw/ro options
  cifs: fix problems with earlier patches
  cifs: have cifs parse scope_id out of IPv6 addresses and use it
  [CIFS] Do not send tree disconnect if session is already disconnected
  [CIFS] Fix build break
  cifs: display scopeid in /proc/mounts
  cifs: add new routine for converting AF_INET and AF_INET6 addrs
  cifs: have cifs_show_options show forceuid/forcegid options
  cifs: remove unneeded NULL checks from cifs_show_options

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc32: Fix makefile not generating required files
  sparc32: Fix tftpboot.img Makefile
  sparc: fix tftpboot.img build
  sparc32: Fix obvious build issues for tftpboot.img build.
  sparc64: Fix build warnings in piggyback_64.c
  sparc64: Don't use alloc_bootmem() in init_IRQ() code paths.

- cleanup debug calls
- shorten function names
- cleanup error exit paths
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

amd64_check_ecc_enabled() returns non-zero status when ECC
checking/correcting is disabled and this fails further loading of the
driver even when 'ecc_enable_override' boot param is used.

Fix that by clearing return status in that case.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Checking whether the machine is using ECC enabled DRAM is done through
testing the DimmEccEn bit in the DRAM Cfg Low register (F2x[1,0]90). Do
that instead of testing all bits from the DimmEccEn upwards.

Also, remove mci->edac_cap assignment and use value returned from
amd64_determine_edac_cap().
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Using the RTAS watchdog driver to read out the temperature crashes
on a PXCAB:

Unable to handle kernel paging request for data at address 0xfe347b50
Faulting instruction address: 0xc00000000001af64
Oops: Kernel access of bad area, sig: 11 [#1]

The wrong usage of "(void *)__pa(&temperature)" in rtas_call() is
removed by using the function rtas_get_sensor() which does the
right thing.
Signed-off-by: NAdrian Reber <adrian@lisas.de>
Acked-by: NUtz Bacher <utz.bacher@de.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When using 64k page sizes, our PTE pages are split in two halves,
the second half containing the "extension" used to keep track of
individual 4k pages when not using HW 64k pages.

However, our page tables used for hugetlb have a slightly different
format and don't carry that "second half".

Our code that batched PTEs to be invalidated unconditionally reads
the "second half" (to put it into the batch), which means that when
called to invalidate hugetlb PTEs, it will access unrelated memory.

It breaks when CONFIG_DEBUG_PAGEALLOC is enabled.

This fixes it by only accessing the second half when the _PAGE_COMBO
bit is set in the first half, which indicates that we are dealing with
a "combo" page which represents 16x4k subpages. Anything else shouldn't
have this bit set and thus not require loading from the second half.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The function udbg_44x_as1_flush() has the wrong prototype causing
a warning when enabling 440 early debug.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

dev_set_name() takes a format string, so use it properly and avoid
a warning with recent gcc's
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

spin_lock() can hang if called while the timebase is frozen,
so use a raw lock instead, also disable interrupts while
at it.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Several platforms use their own copy of what is essentially the same code,
using RTAS to synchronize the timebases when bringing up new CPUs. This
moves it all into a single common implementation and additionally
turns the spinlock into a raw spinlock since the former can rely on
the timebase not being frozen when spinlock debugging is enabled, and finally
masks interrupts while the timebase is disabled.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

RTAS currently uses a normal spinlock. However it can be called from
contexts where this is not necessarily a good idea. For example, it
can be called while syncing timebases, with the core timebase being
frozen. Unfortunately, that will deadlock in case of lock contention
when spinlock debugging is enabled as the spin lock debugging code
will try to use __delay() which ... relies on the timebase being
enabled.

Also RTAS can be used in some low level IRQ handling code path so it
may as well be a raw spinlock for -rt sake.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Based on initial work from: Dale Farnsworth <dale@farnsworth.org>

Add the low level irq tracing hooks for 32-bit powerpc needed
to enable full lockdep functionality.

The approach taken to deal with the code in entry_32.S is that
we don't trace all the transitions of MSR:EE when we just turn
it off to peek at TI_FLAGS without races. Only when we are
calling into C code or returning from exceptions with a state
that have changed from what lockdep thinks.

There's a little bugger though: If we take an exception that
keeps interrupts enabled (such as an alignment exception) while
interrupts are enabled, we will call trace_hardirqs_on() on the
way back spurriously. Not a big deal, but to get rid of it would
require remembering in pt_regs that the exception was one of the
type that kept interrupts enabled which we don't know at this
stage. (Well, we could test all cases for regs->trap but that
sucks too much).
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: NKumar Gala <galak@kernel.crashing.org>

On Mon, Nov 17, 2008 at 01:26:13AM -0600, Sonny Rao wrote:
> On Fri, Nov 07, 2008 at 04:28:29PM +1100, Paul Mackerras wrote:
> > Sonny Rao writes:
> >
> > > Fix the BSR driver to allow small BSR devices, which are limited to a
> > > single 4k space, on a 64k page kernel.  Previously the driver would
> > > reject the mmap since the size was smaller than PAGESIZE (or because
> > > the size was greater than the size of the device).  Now, we check for
> > > this case use remap_4k_pfn(). Also, take out code to set vm_flags,
> > > as the remap_pfn functions will do this for us.
> >
> > Thanks.
> >
> > Do we know that the BSR size will always be 4k if it's not a multiple
> > of 64k?  Is it possible that we could get 8k, 16k or 32k or BSRs?
> > If it is possible, what does the user need to be able to do?  Do they
> > just want to map 4k, or might then want to map the whole thing?
>
>
> Hi Paul, I took a look at changing the driver to reject a request for
> mapping more than a single 4k page, however the only indication we get
> of the requested size in the mmap function is the vma size, and this
> is always one page at minimum.  So, it's not possible to determine if
> the user wants one 4k page or more.  As I noted in my first response,
> there is only one case where this is even possible and I don't think
> it is a significant concern.
>
> I did notice that I left out the check to see if the user is trying to
> map more than the device length, so I fixed that.  Here's the revised
> patch.

Alright, I've reworked this now so that if we get one of these cases
where there's a bsr that's > 4k and < 64k on a 64k kernel we'll only
advertise that it is a 4k BSR to userspace.  I think this is the best
solution since user programs are only supposed to look at sysfs to
determine how much can be mapped, and libbsr does this as well.

Please consider for 2.6.31 as a fix, thanks.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Add a 4096 byte BSR size which will be used on new machines.  Also, remove
the warning when we run into an unknown size, as this can spam the kernel
log excessively.
Signed-off-by: NSonny Rao <sonnyrao@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The 32-bit kernel relies on some memory being mapped covering
the kernel text,data and bss at least, early during boot before
the full MMU setup is done. On 32-bit "classic" processors, this
is done using BAT registers.

On 601, the size of BATs is limited to 8M and we use 2 of them
for that initial mapping. This can become quite tight when enabling
features like lockdep, so let's use a 3rd one to bump that mapping
from 16M to 24M. We keep the 4th BAT free as it can be useful for
debugging early boot code to map things like serial ports.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The macio_dev's created to map devices inside the MacIO ASICs
don't have proper dma_ops. This causes crashes on some machines
since the SCSI code calls dma_map_* on our behalf using the
device we hang from.

This fixes it by copying the parent PCI device dma_ops into
the macio_dev when creating it.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Those functions are way too big to be inline, besides, kmap_atomic()
wants to call debug_kmap_atomic() which isn't exported for modules
and causes module link failures.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Since we can use kmalloc earlier we are getting the following since the
mpic_alloc() code calls alloc_bootmem().  Move to using kzalloc() to
remove the warning.

------------[ cut here ]------------
Badness at c0583248 [verbose debug info unavailable]
NIP: c0583248 LR: c0583210 CTR: 00000004
REGS: c0741de0 TRAP: 0700   Not tainted  (2.6.30-06736-g12a31df)
MSR: 00021000 <ME,CE>  CR: 22024024  XER: 00000000
TASK = c070d3b8[0] 'swapper' THREAD: c0740000 CPU: 0
<6>GPR00: 00000001 c0741e90 c070d3b8 00000001 00000210 00000020 3fffffff 00000000
<6>GPR08: 00000000 c0c85700 c04f8c40 0000002d 22044022 1004a388 7ffd9400 00000000
<6>GPR16: 00000000 7ffcd100 7ffcd100 7ffcd100 c04f8c40 00000000 c059f62c c075a0c0
<6>GPR24: c059f648 00000000 0000000f 00000210 00000020 00000000 3fffffff 00000210
NIP [c0583248] alloc_arch_preferred_bootmem+0x50/0x80
LR [c0583210] alloc_arch_preferred_bootmem+0x18/0x80
Call Trace:
[c0741e90] [c07343b0] devtree_lock+0x0/0x24 (unreliable)
[c0741ea0] [c0583b14] ___alloc_bootmem_nopanic+0x54/0x108
[c0741ee0] [c0583e18] ___alloc_bootmem+0x18/0x50
[c0741ef0] [c057b9cc] mpic_alloc+0x48/0x710
[c0741f40] [c057ecf4] mpc85xx_ds_pic_init+0x190/0x1b8
[c0741f90] [c057633c] init_IRQ+0x24/0x34
[c0741fa0] [c05738b8] start_kernel+0x260/0x3dc
[c0741ff0] [c00003c8] skpinv+0x2e0/0x31c
Instruction dump:
409e001c 7c030378 80010014 83e1000c 38210010 7c0803a6 4e800020 3d20c0c8
39295700 80090004 7c000034 5400d97e <0f000000> 2f800000 409e001c 38800000

BenH: Changed to use GFP_KERNEL, the allocator will do the right thing
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

For some reason we've had an explicit KERN_INFO for GPR dumps.  With
recent changes we get output like:

<6>GPR00: 00000000 ef855eb0 ef858000 00000001 000000d0 f1000000 ffbc8000 ffffffff

The KERN_INFO is causing the <6>.  Don't see any reason to keep it
around.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The old PowerSurge SMP (ie, dual or quad 604 machines) code has
numerous issues in modern world.

One is cpu_possible_map is set too late (the device-tree is bogus)
so we fail to allocate the interrupt stacks and crash. Another
problem is the fact the timebase is frozen by the bringup of the
second CPU so the delays in the generic code will hang, we need
to move some of the calling procedure to inside the powermac code.

This makes it boot again for me
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The kernel reserves the I/O address space from 0x0 to 0xfff for legacy
ISA devices. Change the ranges property for the PCI2ISA bridge to match
the kernels behavior, even if the ranges property isn't used for now.
Signed-off-by: NGerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

A change to the i2c subsystem breaks the warp platform code. The patch
is cleaner anyway, the old way was a bit crufty.

For those with keen eyes, the gratuitous change in the string from
PIKA to Warp is just so the logs look a bit nicer. The following two
lines tend to be printed one after another.

  Warp POST OK
  Warp DTM thread running.

Yeah, this will be the third patch to warp.c submitted in this
release....

Cheers,
   Sean

The i2c_client struct changed, breaking the code that looked for the ad7414
chip. Use the new of_find_i2c_device_by_node function added in 2.6.29.
Signed-off-by: NSean MacLennan <smaclennan@pikatech.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Have git ignore generated files from dtc compile
Signed-off-by: NJon Smirl <jonsmirl@gmail.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NSean MacLennan <smaclennan@pikatech.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Commit 31207dab
"Fix incorrect allocation of interrupt rev-map"
introduced a regression crashing on boot on machines using
a "DCR" based MPIC, such as the Cell blades.

The reason is that the irq host data structure is initialized
much later as a result of that patch, causing our calls to
mpic_map() do be done before we have a host setup.

Unfortunately, this breaks _mpic_map_dcr() which uses the
mpic->irqhost to get to the device node.

This fixes it by, instead, passing the device node explicitely
to mpic_map().
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NAkira Tsukamoto <akirat@rd.scei.sony.co.jp>

Turning on SWIOTLB selects or enables PPC_NEED_DMA_SYNC_OPS, which means
we get the non empty versions of dma_sync_* in asm/dma-mapping.h

On my pseries machine the dma_ops have no such routines and we die with
a null pointer - this patch gets it booting, is there a more elegant way
to do it?
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

ref: http://thread.gmane.org/gmane.linux.kernel/857228/focus=857468

When the ACPI video driver initializes, it does a namespace walk
looking for for supported devices. When we find an appropriate
handle, we walk up the ACPI tree looking for a PCI root bus, and
then walk back down the PCI bus, assuming that every device
inbetween is a P2P bridge.

This assumption is not correct, and is reported broken on at
least:

	Dell Latitude E6400
	ThinkPad X61
	Dell XPS M1330

Add a NULL deref check to prevent boot panics.
Reported-by: NAlessandro Suardi <alessandro.suardi@gmail.com>
Signed-off-by: NTroy Moure <twmoure@szypr.net>
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NJanne Grunau <j@jannau.net>
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NLen Brown <len.brown@intel.com>

CMSG is an ACPI method used to find features available on
an Eee PC. But some features are never repported, even if present.

If the getter of a feature is present, this patch will set
the corresponding bit in cmsg.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NLen Brown <len.brown@intel.com>

If there is there is no getter defined, get_acpi()
will return -ENODEV.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NLen Brown <len.brown@intel.com>

Refactor rfkill code, because we'll add another
rfkill for wwan3g later.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NLen Brown <len.brown@intel.com>

Convert the unusual printk(EEEPC_<level> uses to
the more standard pr_fmt and pr_<level>(.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NLen Brown <len.brown@intel.com>

The eee contains a logically (but not physically) hotpluggable PCIe slot.
Currently this is handled by adding or removing the PCI device in response
to rfkill events, but if a user has forced pciehp to bind to it (with the
force=1 argument) then both drivers will try to handle the event and
hilarity (in the form of oopses) will ensue. This can be avoided by having
eee-laptop register the slot as a hotplug slot. Only one of pciehp and
eee-laptop will successfully register this, avoiding the problem.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Tested-by: NDarren Salt <linux@youmustbejoking.demon.co.uk>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLen Brown <len.brown@intel.com>