Since the recovery testing is effectively about emulating power cuts by UBIFS,
use "power cut" as the base term for all the related variables and name them
correspondingly. This is just a minor clean-up for the sake of readability.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

This is a clean-up of the power-cut emulation code - remove the custom list of
superblocks which we maintained to find the superblock by the UBI volume
descriptor. We do not need that crud any longer, because now we can get the
superblock as a function argument.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Now when we use UBIFS helpers for all the I/O, we can remove the horrible hack
of re-defining UBI I/O functions.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Switch the rest of direct UBI calls to UBIFS helper functions.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Stop using 'ubi_leb_write()' directly and switch to the 'ubifs_leb_write()'
helper.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Instead of using 'ubi_read()' function directly, used the 'ubifs_leb_read()'
helper function instead. This allows to get rid of several redundant error
messages and make sure that we always have a stack dump on read errors.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Introduce the following I/O helper functions: 'ubifs_leb_read()',
'ubifs_leb_write()', 'ubifs_leb_change()', 'ubifs_leb_unmap()',
'ubifs_leb_map()', 'ubifs_is_mapped().

The idea is to wrap all UBI I/O functions in order to encapsulate various
assertions and error path handling (error message, stack dump, switching to R/O
mode). And there are some other benefits of this which will be used in the
following patches.

This patch does not switch whole UBIFS to use these functions yet.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

When switching to R/O mode due to an I/O error, always dump the stack, not only
when debugging is enabled.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

This patch contains several minor clean-up and preparational cahnges.

1. Remove 'dbg_read()', 'dbg_write()', 'dbg_change()', and 'dbg_leb_erase()'
   functions as they are not used.
2. Remove 'dbg_leb_read()' and 'dbg_is_mapped()' as they are not really needed,
   it is fine to let reads go through in failure mode.
3. Rename 'offset' argument to 'offs' to be consistent with the rest of UBIFS
   code.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Now we have per-FS (superblock) debugfs knobs, but they have one drawback - you
have to first mount the FS and only after this you can switch self-checks
on/off. But often we want to have the checks enabled during the mount.
Introduce global debugging knobs for this purpose.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Separate out pieces of code from the debugfs file read/write functions and
create separate 'interpret_user_input()'/'provide_user_output()' helpers. These
helpers will be needed in one of the following patches, so this is just a
preparational change.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Move 'dbg_debugfs_init()' and 'dbg_debugfs_exit()' functions which initialize
debugfs for whole UBIFS subsystem below the code which initializes debugfs for
a particular UBIFS instance. And do the same for 'ubifs_debugging_init()' and
'ubifs_debugging_exit()' functions. This layout is a bit better for the next
patches, so this is just a preparation.

Also, rename 'open_debugfs_file()' into 'dfs_file_open()' for consistency.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

When we are testing UBIFS recovery, it is better to print in which eraseblock
we are going to fail. Currently UBIFS prints it only if recovery debugging
messages are enabled, but this is not very practical. So change 'dbg_rcvry()'
messages to 'ubifs_warn()' messages.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

UBIFS has many built-in self-check functions which can be enabled using the
debug_chks module parameter or the corresponding sysfs file
(/sys/module/ubifs/parameters/debug_chks). However, this is not flexible enough
because it is not per-filesystem. This patch moves this to debugfs interfaces.

We already have debugfs support, so this patch just adds more debugfs files.
While looking at debugfs support I've noticed that it is racy WRT file-system
unmount, and added a TODO entry for that. This problem has been there for long
time and it is quite standard debugfs PITA. The plan is to fix this later.

This patch is simple, but it is large because it changes many places where we
check if a particular type of checks is enabled or disabled.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

We have too many different debugging checks - lessen the amount by merging all
index-related checks into one. At the same time, move the "force in-the-gap"
test to the "index checks" class, because it is too heavy for the "general"
class.

This patch merges TNC, Old index, and Index size check and calles this just
"index checks".
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

This patch introduces helper functions for all debugging checks, so instead of
doing

if (!(ubifs_chk_flags & UBIFS_CHK_GEN))

we now do

if (!dbg_is_chk_gen(c))

This is a preparation to further changes where the flags will go away, and
we'll need to only change the helper functions, but the code which utilizes
them won't be touched.

At the same time this patch removes 'dbg_force_in_the_gaps()',
'dbg_force_in_the_gaps_enabled()', and dbg_failure_mode helpers for
consistency.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Add 'const struct ubifs_info *c' parameter to 'dbg_check_synced_i_size()'
function because we'll need it in the next patch when we switch to debugfs.
So this patch is just a preparation.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Add 'struct ubifs_info *c' parameter to the 'dbg_check_name()' debugging
function - it will be needed in one of the following commits where we switch to
debugfs. So this is just a preparation.

Mark parameters as 'const' while on it.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Add a couple of comments - while looking into TNC I could not easily figure out
few facts, so it is a good idea to document them in the code.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

The UBIFS lpt tree is in many aspects similar to the TNC tree, and we have
similar flags for these trees. And by mistake we use the COW_ZNODE flag for
LPT in some places, instead of the right flag COW_CNODE. And this works
only because these two constants have the same value.

This patch makes all the LPT code to use COW_CNODE and also changes COW_CNODE
constant value to make sure we do not misuse the flags any more.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

We have 3 znode flags: cow, obsolete, dirty. For the last flag we have a
'ubifs_zn_dirty()' helper function, but for the other 2 flags we use
'test_bit()' directly.

This patch makes the situation more consistent and introduces helpers for the
other 2 flags: 'ubifs_zn_cow()' and 'ubifs_zn_obsolete()'.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Remove dead pieces of code under "if (c->min_io_size == 1)" statement -
we never execute it because in UBIFS 'c->min_io_size' is always at least 8.
This are leftovers from old pre-mainline prototype.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Remove unnecessary brackets in "inode->i_flags |= (S_NOCMTIME)" statement to
make the code not look silly.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Instead of using long "(inode->i_mode & S_IFMT) != S_IFREG" expression, use
shorted "!S_ISREG(inode->i_mode)".
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Since this function is not only about size checking, rename it to
'dbg_check_dir()'.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Teach 'dbg_dump_inode()' dump directory entries for directory inodes.
This requires few additional changes:
1. The 'c' argument of 'dbg_dump_inode()' cannot be const any more.
2. Users of 'dbg_dump_inode()' should not have 'tnc_mutex' locked.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

When we fail to read a pnode or nnode - print stacktrace if debugging is enabled.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

This patch lessens the 'struct ubifs_debug_info' size by 90 bytes by
allocating less bytes for the debugfs root directory name. It introduces macros
for the name patter an length instead of hard-coding 100 bytes. It also makes
UBIFS use 'snprintf()' and teaches it to gracefully catch situations when the
name array is too short.

Additionally, this patch makes 2 unrelated changes - I just thought they do not
deserve separate commits: simplifies 'ubifs_assert()' for non-debugging case
and makes 'dbg_debugfs_init()' properly verify debugfs return code which may be
an error code or NULL, so we should you 'IS_ERR_OR_NULL()' instead of
'IS_ERR()'.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

If commit failed and it is in broken state, UBIFS switches to R/O mode. Most
operations return -EROFS in this case, except of commit which returns -EINVAL.
Make it return -EROFS too for consistency. This is also important for our power
cut emulation testing.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Under heavy memory and filesystem load, users observe the assertion
mapping->nrpages == 0 in end_writeback() trigger.  This can be caused by
page reclaim reclaiming the last page from a mapping in the following
race:

	CPU0				CPU1
  ...
  shrink_page_list()
    __remove_mapping()
      __delete_from_page_cache()
        radix_tree_delete()
					evict_inode()
					  truncate_inode_pages()
					    truncate_inode_pages_range()
					      pagevec_lookup() - finds nothing
					  end_writeback()
					    mapping->nrpages != 0 -> BUG
        page->mapping = NULL
        mapping->nrpages--

Fix the problem by doing a reliable check of mapping->nrpages under
mapping->tree_lock in end_writeback().

Analyzed by Jay <jinshan.xiong@whamcloud.com>, lost in LKML, and dug out
by Miklos Szeredi <mszeredi@suse.de>.

Cc: Jay <jinshan.xiong@whamcloud.com>
Cc: Miklos Szeredi <mszeredi@suse.de>
Signed-off-by: NJan Kara <jack@suse.cz>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

romfs_get_unmapped_area() checks argument `len' without considering
PAGE_ALIGN which will cause do_mmap_pgoff() return -EINVAL error after
commit f67d9b15 ("nommu: add page_align to mmap").

Fix the check by changing it in same way ramfs_nommu_get_unmapped_area()
was changed in ramfs/file-nommu.c.
Signed-off-by: NBob Liu <lliubbo@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: NGreg Ungerer <gerg@snapgear.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When iputting the inode, We may leave the delayed nodes if they have some
delayed items that have not been dealt with. So when the inode is read again,
we must look up the relative delayed node, and use the information in it to
initialize the inode. Or we will get inconsonant inode information, it may
cause that the same directory index number is allocated again, and hit the
following oops:

[ 5447.554187] err add delayed dir index item(name: pglog_0.965_0) into the
insertion tree of the delayed node(root id: 262, inode id: 258, errno: -17)
[ 5447.569766] ------------[ cut here ]------------
[ 5447.575361] kernel BUG at fs/btrfs/delayed-inode.c:1301!
[SNIP]
[ 5447.790721] Call Trace:
[ 5447.793191]  [<ffffffffa0641c4e>] btrfs_insert_dir_item+0x189/0x1bb [btrfs]
[ 5447.800156]  [<ffffffffa0651a45>] btrfs_add_link+0x12b/0x191 [btrfs]
[ 5447.806517]  [<ffffffffa0651adc>] btrfs_add_nondir+0x31/0x58 [btrfs]
[ 5447.812876]  [<ffffffffa0651d6a>] btrfs_create+0xf9/0x197 [btrfs]
[ 5447.818961]  [<ffffffff8111f840>] vfs_create+0x72/0x92
[ 5447.824090]  [<ffffffff8111fa8c>] do_last+0x22c/0x40b
[ 5447.829133]  [<ffffffff8112076a>] path_openat+0xc0/0x2ef
[ 5447.834438]  [<ffffffff810c58e2>] ? __perf_event_task_sched_out+0x24/0x44
[ 5447.841216]  [<ffffffff8103ecdd>] ? perf_event_task_sched_out+0x59/0x67
[ 5447.847846]  [<ffffffff81121a79>] do_filp_open+0x3d/0x87
[ 5447.853156]  [<ffffffff811e126c>] ? strncpy_from_user+0x43/0x4d
[ 5447.859072]  [<ffffffff8111f1f5>] ? getname_flags+0x2e/0x80
[ 5447.864636]  [<ffffffff8111f179>] ? do_getname+0x14b/0x173
[ 5447.870112]  [<ffffffff8111f1b7>] ? audit_getname+0x16/0x26
[ 5447.875682]  [<ffffffff8112b1ab>] ? spin_lock+0xe/0x10
[ 5447.880882]  [<ffffffff81112d39>] do_sys_open+0x69/0xae
[ 5447.886153]  [<ffffffff81112db1>] sys_open+0x20/0x22
[ 5447.891114]  [<ffffffff813b9aab>] system_call_fastpath+0x16/0x1b

Fix it by reusing the old delayed node.
Reported-by: NJim Schutt <jaschut@sandia.gov>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Tested-by: NJim Schutt <jaschut@sandia.gov>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

A user reported this bug again where we have more bitmaps than we are supposed
to.  This is because we failed to load the free space cache, but don't update
the ctl->total_bitmaps counter when we remove entries from the tree.  This patch
fixes this problem and we should be good to go again.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

data parameter should be u64 because a full-sized chunk flags field is
passed instead of 0/1 for distinguishing data from metadata.  All
underlying functions expect u64.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

... instead of just failing with -EINVAL
Acked-by: NPavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Acked-by: NPavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

if cifs_get_root() fails, we end up with ->mount() returning NULL,
which is not what callers expect.  Moreover, in case of superblock
reuse we end up leaking a superblock reference...
Acked-by: NPavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

have ->s_fs_info set by the set() callback passed to sget()
Acked-by: NPavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

all callers of cifs_umount() proceed to do the same thing; pull it into
cifs_umount() itself.
Acked-by: NPavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

instead of calling it manually in case if cifs_read_super() fails
to set ->s_root, just call it from ->kill_sb().  cifs_put_super()
is gone now *and* we have cifs_sb shutdown and destruction done
after the superblock is gone from ->s_instances.
Acked-by: NPavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>