- 25 5月, 2012 1 次提交
-
-
由 Andy Adamson 提交于
We only support one layout type per file system, so one threshold_item4 per mdsthreshold4. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 23 5月, 2012 2 次提交
-
-
由 Chuck Lever 提交于
Save the server major and minor ID results from EXCHANGE_ID, as they are needed for detecting server trunking. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Currently our NFS client assigns a unique SETCLIENTID boot verifier for each server IP address it knows about. It's set to CURRENT_TIME when the struct nfs_client for that server IP is created. During the SETCLIENTID operation, our client also presents an nfs_client_id4 string to servers, as an identifier on which the server can hang all of this client's NFSv4 state. Our client's nfs_client_id4 string is unique for each server IP address. An NFSv4 server is obligated to wipe all NFSv4 state associated with an nfs_client_id4 string when the client presents the same nfs_client_id4 string along with a changed SETCLIENTID boot verifier. When our client unmounts the last of a server's shares, it destroys that server's struct nfs_client. The next time the client mounts that NFS server, it creates a fresh struct nfs_client with a fresh boot verifier. On seeing the fresh verifer, the server wipes any previous NFSv4 state associated with that nfs_client_id4. However, NFSv4.1 clients are supposed to present the same nfs_client_id4 string to all servers. And, to support Transparent State Migration, the same nfs_client_id4 string should be presented to all NFSv4.0 servers so they recognize that migrated state for this client belongs with state a server may already have for this client. (This is known as the Uniform Client String model). If the nfs_client_id4 string is the same but the boot verifier changes for each server IP address, SETCLIENTID and EXCHANGE_ID operations from such a client could unintentionally result in a server wiping a client's previously obtained lease. Thus, if our NFS client is going to use a fixed nfs_client_id4 string, either for NFSv4.0 or NFSv4.1 mounts, our NFS client should use a boot verifier that does not change depending on server IP address. Replace our current per-nfs_client boot verifier with a per-nfs_net boot verifier. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 02 5月, 2012 6 次提交
-
-
由 Trond Myklebust 提交于
No attributes are supposed to change during a COMMIT call, so there is no need to request post-op attributes. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Get rid of the post-op GETATTR on the directory in order to reduce the amount of processing done on the server. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Get rid of the post-op GETATTR on the directory in order to reduce the amount of processing done on the server. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Get rid of the post-op GETATTR on the directory in order to reduce the amount of processing done on the server. The cost is that if we later need to stat() the directory, then we know that the ctime and mtime are likely to be invalid. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
In order to retrieve cache consistency attributes before anyone else has a chance to change the inode, we need to put the GETATTR op _before_ the DELEGRETURN op. We can then use that as part of a 'nfs_post_op_update_inode_force_wcc()' call, to ensure that we update the attributes without clearing our cached data. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 28 4月, 2012 5 次提交
-
-
由 Fred Isaman 提交于
Commits don't need the vectors of pages, etc. that writes do. Split out a separate structure for the commit operation. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
Whenever lookup sees wrongsec do a secinfo and retry the lookup to find attributes of the file or directory, such as "is this a referral mountpoint?". This also allows me to remove handling -NFS4ERR_WRONSEC as part of getattr xdr decoding. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
I was using the same decoder function for SECINFO and SECINFO_NO_NAME, so it was returning an error when it tried to decode an OP_SECINFO_NO_NAME header as OP_SECINFO. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Sachin Prabhu 提交于
When attempting to cache ACLs returned from the server, if the bitmap size + the ACL size is greater than a PAGE_SIZE but the ACL size itself is smaller than a PAGE_SIZE, we can read past the buffer page boundary. Signed-off-by: NSachin Prabhu <sprabhu@redhat.com> Reported-by: NJian Li <jiali@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Sachin Prabhu 提交于
Bug noticed in commit bf118a34 When calling GETACL, if the size of the bitmap array, the length attribute and the acl returned by the server is greater than the allocated buffer(args.acl_len), we can Oops with a General Protection fault at _copy_from_pages() when we attempt to read past the pages allocated. This patch allocates an extra PAGE for the bitmap and checks to see that the bitmap + attribute_length + ACLs don't exceed the buffer space allocated to it. Signed-off-by: NSachin Prabhu <sprabhu@redhat.com> Reported-by: NJian Li <jiali@redhat.com> [Trond: Fixed a size_t vs unsigned int printk() warning] Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 21 4月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
The NFSv4 spec is ambiguous about whether or not it is permissible to reuse open owner names, so play it safe. This patch adds a timestamp to the state_owner structure, and combines that with the IDA based uniquifier. Fixes a regression whereby the Linux server returns NFS4ERR_BAD_SEQID. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 15 3月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
We should use the 'ifdebug' wrapper rather than trying to inline tests of nfs_debug, so that the code compiles correctly when we don't define NFS_DEBUG. Reported-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 09 3月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
Ensure that we select delegation stateids first, then lock stateids and then open stateids. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 06 3月, 2012 12 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up due to code review. The nfs4_verifier's data field is not guaranteed to be u32-aligned. Casting an array of chars to a u32 * is considered generally hazardous. Fix this by using a __be32 array to generate a verifier's contents, and then byte-copy the contents into the verifier field. The contents of a verifier, for all intents and purposes, are opaque bytes. Only local code that generates a verifier need know the actual content and format. Everyone else compares the full byte array for exact equality. Also, sizeof(nfs4_verifer) is the size of the in-core verifier data structure, but NFS4_VERIFIER_SIZE is the number of octets in an XDR'd verifier. The two are not interchangeable, even if they happen to have the same value. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Replace the union with the common struct stateid4 as defined in both RFC3530 and RFC5661. This makes it easier to access the sequence id, which will again make implementing support for parallel OPEN calls easier. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
It is really a function for selecting the correct stateid to use in a read or write situation. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The current version of encode_stateid really only applies to open stateids. You can't use it for locks, delegations or layouts. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 03 3月, 2012 5 次提交
-
-
由 Chuck Lever 提交于
Get rid of encode_compound: tag= when XDR debugging is enabled. The current Linux client never sets compound tags. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
The fh_expire_type file attribute is a filesystem wide attribute that consists of flags that indicate what characteristics file handles on this FSID have. Our client doesn't support volatile file handles. It should find out early (say, at mount time) whether the server is going to play shenanighans with file handles during a migration. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
The Linux NFS client must distinguish between referral events (which it currently supports) and migration events (which it does not yet support). In both types of events, an fs_locations array is returned. But upper layers, not the XDR layer, should make the distinction between a referral and a migration. There really isn't a way for an XDR decoder function to distinguish the two, in general. Slightly adjust the FATTR flags returned by decode_fs_locations() to set NFS_ATTR_FATTR_V4_LOCATIONS only if a non-empty locations array was returned from the server. Then have logic in nfs4proc.c distinguish whether the locations array is for a referral or something else. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: pass just the clientid4 to encode_renew(). This enables it to be used by callers who might not have an full nfs_client. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
I noticed recently that decode_attr_fs_locations() is not generating very pretty debugging output. The pathname components each appear on a separate line of output, though that does not appear to be the intended display behavior. The preferred way to generate continued lines of output on the console is to use pr_cont(). Note that incoming pathname4 components contain a string that is not necessarily NUL-terminated. I did actually see some trailing garbage on the console. In addition to correcting the line continuation problem, add a string precision format specifier to ensure that each component string is displayed properly, and that vsnprintf() does not Oops. Someone pointed out that allowing incoming network data to possibly generate a console line of unbounded length may not be such a good idea. Since this output will rarely be enabled, and there is a hard upper bound (NFS4_PATHNAME_MAXCOMPONENTS) in our implementation, this is probably not a major concern. It might be useful to additionally sanity-check the length of each incoming component, however. RFC 3530bis15 does not suggest a maximum number of UTF-8 characters per component for either the pathname4 or component4 types. However, we could invent one that is appropriate for our implementation. Another possibility is to scrap all of this and print these pathnames in upper layers after a reasonable amount of sanity checking in the XDR layer. This would give us an opportunity to allocate a full buffer so that the whole pathname would be output via a single dprintk. Introduced by commit 7aaa0b3b: "NFSv4: convert fs-locations-components to conform to RFC3530," (June 9, 2006). Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 02 3月, 2012 2 次提交
-
-
由 Weston Andros Adamson 提交于
Shows the implementation ids in /proc/self/mountstats. This doesn't break the nfs-utils mountstats tool. Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Weston Andros Adamson 提交于
Send the nfs implementation id in EXCHANGE_ID requests unless the module parameter nfs.send_implementation_id is 0. This adds a CONFIG variable for the nii_domain that defaults to "kernel.org". Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 07 2月, 2012 3 次提交
-
-
由 Weston Andros Adamson 提交于
This patch addresses printks that have some context to show that they are from fs/nfs/, but for the sake of consistency now start with NFS: Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Weston Andros Adamson 提交于
Messages like "Got error -10052 from the server on DESTROY_SESSION. Session has been destroyed regardless" can be confusing to users who aren't very familiar with NFS. NOTE: This patch ignores any printks() that start by printing __func__ - that will be in a separate patch. Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This takes the guesswork out of what stateid to use. The caller is expected to figure this out and pass in the correct one. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 04 2月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
Commit bf118a34 (NFSv4: include bitmap in nfsv4 get acl data) introduces the 'acl_scratch' page for the case where we may need to decode multi-page data. However it fails to take into account the fact that the variable may be NULL (for the case where we're not doing multi-page decode), and it also attaches it to the encoding xdr_stream rather than the decoding one. The immediate result is an Oops in nfs4_xdr_enc_getacl due to the call to page_address() with a NULL page pointer. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Andy Adamson <andros@netapp.com> Cc: stable@vger.kernel.org
-