The start of a large patch series to clean up and optimise the page
allocator.

The performance improvements are in a wide range depending on the exact
machine but the results I've seen so fair are approximately;

kernbench:	0	to	 0.12% (elapsed time)
		0.49%	to	 3.20% (sys time)
aim9:		-4%	to	30% (for page_test and brk_test)
tbench:		-1%	to	 4%
hackbench:	-2.5%	to	 3.45% (mostly within the noise though)
netperf-udp	-1.34%  to	 4.06% (varies between machines a bit)
netperf-tcp	-0.44%  to	 5.22% (varies between machines a bit)

I haven't sysbench figures at hand, but previously they were within the
-0.5% to 2% range.

On netperf, the client and server were bound to opposite number CPUs to
maximise the problems with cache line bouncing of the struct pages so I
expect different people to report different results for netperf depending
on their exact machine and how they ran the test (different machines, same
cpus client/server, shared cache but two threads client/server, different
socket client/server etc).

I also measured the vmlinux sizes for a single x86-based config with
CONFIG_DEBUG_INFO enabled but not CONFIG_DEBUG_VM.  The core of the
.config is based on the Debian Lenny kernel config so I expect it to be
reasonably typical.

This patch:

__alloc_pages_internal is the core page allocator function but essentially
it is an alias of __alloc_pages_nodemask.  Naming a publicly available and
exported function "internal" is also a big ugly.  This patch renames
__alloc_pages_internal() to __alloc_pages_nodemask() and deletes the old
nodemask function.

Warning - This patch renames an exported symbol.  No kernel driver is
affected by external drivers calling __alloc_pages_internal() should
change the call to __alloc_pages_nodemask() without any alteration of
parameters.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Reviewed-by: NChristoph Lameter <cl@linux-foundation.org>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On an x86_64 with 4GB ram, tcp_init()'s call to alloc_large_system_hash(),
to allocate tcp_hashinfo.ehash, is now triggering an mmotm WARN_ON_ONCE on
order >= MAX_ORDER - it's hoping for order 11.  alloc_large_system_hash()
had better make its own check on the order.
Signed-off-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: David Miller <davem@davemloft.net>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix allocating page cache/slab object on the unallowed node when memory
spread is set by updating tasks' mems_allowed after its cpuset's mems is
changed.

In order to update tasks' mems_allowed in time, we must modify the code of
memory policy.  Because the memory policy is applied in the process's
context originally.  After applying this patch, one task directly
manipulates anothers mems_allowed, and we use alloc_lock in the
task_struct to protect mems_allowed and memory policy of the task.

But in the fast path, we didn't use lock to protect them, because adding a
lock may lead to performance regression.  But if we don't add a lock,the
task might see no nodes when changing cpuset's mems_allowed to some
non-overlapping set.  In order to avoid it, we set all new allowed nodes,
then clear newly disallowed ones.

[lee.schermerhorn@hp.com:
  The rework of mpol_new() to extract the adjusting of the node mask to
  apply cpuset and mpol flags "context" breaks set_mempolicy() and mbind()
  with MPOL_PREFERRED and a NULL nodemask--i.e., explicit local
  allocation.  Fix this by adding the check for MPOL_PREFERRED and empty
  node mask to mpol_new_mpolicy().

  Remove the now unneeded 'nodes = NULL' from mpol_new().

  Note that mpol_new_mempolicy() is always called with a non-NULL
  'nodes' parameter now that it has been removed from mpol_new().
  Therefore, we don't need to test nodes for NULL before testing it for
  'empty'.  However, just to be extra paranoid, add a VM_BUG_ON() to
  verify this assumption.]
[lee.schermerhorn@hp.com:

  I don't think the function name 'mpol_new_mempolicy' is descriptive
  enough to differentiate it from mpol_new().

  This function applies cpuset set context, usually constraining nodes
  to those allowed by the cpuset.  However, when the 'RELATIVE_NODES flag
  is set, it also translates the nodes.  So I settled on
  'mpol_set_nodemask()', because the comment block for mpol_new() mentions
  that we need to call this function to "set nodes".

  Some additional minor line length, whitespace and typo cleanup.]
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Paul Menage <menage@google.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the bug that the kernel didn't spread page cache/slab object evenly
over all the allowed nodes when spread flags were set by updating tasks'
page/slab spread flags in time.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Paul Menage <menage@google.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kernel still allocates the page caches on old node after modifying its
cpuset's mems when 'memory_spread_page' was set, or it didn't spread the
page cache evenly over all the nodes that faulting task is allowed to usr
after memory_spread_page was set.  it is caused by the old mem_allowed and
flags of the task, the current kernel doesn't updates them unless some
function invokes cpuset_update_task_memory_state(), it is too late
sometimes.We must update the mem_allowed and the flags of the tasks in
time.

Slab has the same problem.

The following patches fix this bug by updating tasks' mem_allowed and
spread flag after its cpuset's mems or spread flag is changed.

This patch:

Extract a function from cpuset_update_task_memory_state().  It will be
used later for update tasks' page/slab spread flags after its cpuset's
flag is set
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Paul Menage <menage@google.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

get_dirty_limits() calls clip_bdi_dirty_limit() and task_dirty_limit()
with variable pbdi_dirty as one of the arguments.  This variable is an
unsigned long * but both functions expect it to be a long *.  This causes
the following sparse warnings:

  warning: incorrect type in argument 3 (different signedness)
     expected long *pbdi_dirty
     got unsigned long *pbdi_dirty
  warning: incorrect type in argument 2 (different signedness)
     expected long *pdirty
     got unsigned long *pbdi_dirty

Fix the warnings by changing the long * to unsigned long * in both
functions.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 33c120ed ("more aggressively use
lumpy reclaim") increased how aggressive lumpy reclaim was by isolating
both active and inactive pages for asynchronous lumpy reclaim on
costly-high-order pages and for cheap-high-order when memory pressure is
high.  However, if the system is under heavy pressure and there are dirty
pages, asynchronous IO may not be sufficient to reclaim a suitable page in
time.

This patch causes the caller to enter synchronous lumpy reclaim for
costly-high-order pages and for cheap-high-order pages when under memory
pressure.

Minchan.kim@gmail.com said:

Andy added synchronous lumpy reclaim with
c661b078.  At that time, lumpy reclaim is
not agressive.  His intension is just for high-order users.(above
PAGE_ALLOC_COSTLY_ORDER).

After some time, Rik added aggressive lumpy reclaim with
33c120ed.  His intention was to do lumpy
reclaim when high-order users and trouble getting a small set of
contiguous pages.

So we also have to add synchronous pageout for small set of contiguous
pages.

Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NMinchan Kim <Minchan.kim@gmail.com>
Reviewed-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move more documentation for get_user_pages_fast into the new kerneldoc comment.
Add some comments for get_user_pages as well.

Also, move get_user_pages_fast declaration up to get_user_pages. It wasn't
there initially because it was once a static inline function.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Andy Grover <andy.grover@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that we do readahead for sequential mmap reads, here is a simple
evaluation of the impacts, and one further optimization.

It's an NFS-root debian desktop system, readahead size = 60 pages.
The numbers are grabbed after a fresh boot into console.

approach        pgmajfault      RA miss ratio   mmap IO count   avg IO size(pages)
   A            383             31.6%           383             11
   B            225             32.4%           390             11
   C            224             32.6%           307             13

case A: mmap sync/async readahead disabled
case B: mmap sync/async readahead enabled, with enforced full async readahead size
case C: mmap sync/async readahead enabled, with enforced full sync/async readahead size
or:
A = vanilla 2.6.30-rc1
B = A plus mmap readahead
C = B plus this patch

The numbers show that
- there are good possibilities for random mmap reads to trigger readahead
- 'pgmajfault' is reduced by 1/3, due to the _async_ nature of readahead
- case C can further reduce IO count by 1/4
- readahead miss ratios are not quite affected

The theory is
- readahead is _good_ for clustered random reads, and can perform
  _better_ than readaround because they could be _async_.
- async readahead size is guaranteed to be larger than readaround
  size, and they are _async_, hence will mostly behave better
However for B
- sync readahead size could be smaller than readaround size, hence may
  make things worse by produce more smaller IOs
which will be fixed by this patch.

Final conclusion:
- mmap readahead reduced major faults by 1/3 and no obvious overheads;
- mmap io can be further reduced by 1/4 with this patch.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce page cache context based readahead algorithm.
This is to better support concurrent read streams in general.

RATIONALE
---------
The current readahead algorithm detects interleaved reads in a _passive_ way.
Given a sequence of interleaved streams 1,1001,2,1002,3,4,1003,5,1004,1005,6,...
By checking for (offset == prev_offset + 1), it will discover the sequentialness
between 3,4 and between 1004,1005, and start doing sequential readahead for the
individual streams since page 4 and page 1005.

The context readahead algorithm guarantees to discover the sequentialness no
matter how the streams are interleaved. For the above example, it will start
sequential readahead since page 2 and 1002.

The trick is to poke for page @offset-1 in the page cache when it has no other
clues on the sequentialness of request @offset: if the current requenst belongs
to a sequential stream, that stream must have accessed page @offset-1 recently,
and the page will still be cached now. So if page @offset-1 is there, we can
take request @offset as a sequential access.

BENEFICIARIES
-------------
- strictly interleaved reads  i.e. 1,1001,2,1002,3,1003,...
  the current readahead will take them as silly random reads;
  the context readahead will take them as two sequential streams.

- cooperative IO processes   i.e. NFS and SCST
  They create a thread pool, farming off (sequential) IO requests to different
  threads which will be performing interleaved IO.

  It was not easy(or possible) to reliably tell from file->f_ra all those
  cooperative processes working on the same sequential stream, since they will
  have different file->f_ra instances. And NFSD's file->f_ra is particularly
  unusable, since their file objects are dynamically created for each request.
  The nfsd does have code trying to restore the f_ra bits, but not satisfactory.

  The new scheme is to detect the sequential pattern via looking up the page
  cache, which provides one single and consistent view of the pages recently
  accessed. That makes sequential detection for cooperative processes possible.

USER REPORT
-----------
Vladislav recommends the addition of context readahead as a result of his SCST
benchmarks. It leads to 6%~40% performance gains in various cases and achieves
equal performance in others.                http://lkml.org/lkml/2009/3/19/239

OVERHEADS
---------
In theory, it introduces one extra page cache lookup per random read.  However
the below benchmark shows context readahead to be slightly faster, wondering..

Randomly reading 200MB amount of data on a sparse file, repeat 20 times for
each block size. The average throughputs are:

                       	original ra	context ra	gain
 4K random reads:	 65.561MB/s	 65.648MB/s	+0.1%
16K random reads:	124.767MB/s	124.951MB/s	+0.1%
64K random reads: 	162.123MB/s	162.278MB/s	+0.1%

Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Tested-by: NVladislav Bolkhovitin <vst@vlnb.net>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Split all readahead cases, and move the random one to bottom.

No behavior changes.

This is to prepare for the introduction of context readahead, and make it
easy for inserting accounting/tracing points for each case.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Vladislav Bolkhovitin <vst@vlnb.net>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The counterpart of radix_tree_next_hole(). To be used by context readahead.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Vladislav Bolkhovitin <vst@vlnb.net>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Mmap read-around now shares the same code style and data structure with
readahead code.

This also removes do_page_cache_readahead().  Its last user, mmap
read-around, has been changed to call ra_submit().

The no-readahead-if-congested logic is dumped by the way.  Users will be
pretty sensitive about the slow loading of executables.  So it's
unfavorable to disabled mmap read-around on a congested queue.

[akpm@linux-foundation.org: coding-style fixes]
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need this in one particular case and two more general ones.

Now we do async readahead for sequential mmap reads, and do it with the
help of PG_readahead.  For normal reads, PG_readahead is the sufficient
condition to do a sequential readahead.  But unfortunately, for mmap
reads, there is a tiny nuisance:

[11736.998347] readahead-init0(process: sh/23926, file: sda1/w3m, offset=0:4503599627370495, ra=0+4-3) = 4
[11737.014985] readahead-around(process: w3m/23926, file: sda1/w3m, offset=0:0, ra=290+32-0) = 17
[11737.019488] readahead-around(process: w3m/23926, file: sda1/w3m, offset=0:0, ra=118+32-0) = 32
[11737.024921] readahead-interleaved(process: w3m/23926, file: sda1/w3m, offset=0:2, ra=4+6-6) = 6
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~                                                 ~~~~~~~~~~~~~

An unfavorably small readahead.  The original dumb read-around size could
be more efficient.

That happened because ld-linux.so does a read(832) in L1 before mmap(),
which triggers a 4-page readahead, with the second page tagged
PG_readahead.

L0: open("/lib/libc.so.6", O_RDONLY)        = 3
L1: read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340\342"..., 832) = 832
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
L2: fstat(3, {st_mode=S_IFREG|0755, st_size=1420624, ...}) = 0
L3: mmap(NULL, 3527256, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fac6e51d000
L4: mprotect(0x7fac6e671000, 2097152, PROT_NONE) = 0
L5: mmap(0x7fac6e871000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x154000) = 0x7fac6e871000
L6: mmap(0x7fac6e876000, 16984, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fac6e876000
L7: close(3)                                = 0

In general, the PG_readahead flag will also be hit in cases

- sequential reads

- clustered random reads

A full readahead size is desirable in both cases.

Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Auto-detect sequential mmap reads and do readahead for them.

The sequential mmap readahead will be triggered when
- sync readahead: it's a major fault and (prev_offset == offset-1);
- async readahead: minor fault on PG_readahead page with valid readahead state.

The benefits of doing readahead instead of read-around:
- less I/O wait thanks to async readahead
- double real I/O size and no more cache hits

The single stream case is improved a little.
For 100,000 sequential mmap reads:

                                    user       system    cpu        total
(1-1)  plain -mm, 128KB readaround: 3.224      2.554     48.40%     11.838
(1-2)  plain -mm, 256KB readaround: 3.170      2.392     46.20%     11.976
(2)  patched -mm, 128KB readahead:  3.117      2.448     47.33%     11.607

The patched (2) has smallest total time, since it has no cache hit overheads
and less I/O block time(thanks to async readahead). Here the I/O size
makes no much difference, since there's only one single stream.

Note that (1-1)'s real I/O size is 64KB and (1-2)'s real I/O size is 128KB,
since the half of the read-around pages will be readahead cache hits.

This is going to make _real_ differences for _concurrent_ IO streams.

Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This shouldn't really change behavior all that much, but the single rather
complex function with read-ahead inside a loop etc is broken up into more
manageable pieces.

The behaviour is also less subtle, with the read-ahead being done up-front
rather than inside some subtle loop and thus avoiding the now unnecessary
extra state variables (ie "did_readaround" is gone).

Fengguang: the code split in fact fixed a bug reported by Pavel Levshin:
the PGMAJFAULT accounting used to be bypassed when MADV_RANDOM is set, in
which case the original code will directly jump to no_cached_page reading.

Cc: Pavel Levshin <lpk@581.spb.su>
Cc: <wli@movementarian.org>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The readahead call scheme is error-prone in that it expects the call sites
to check for async readahead after doing a sync one.  I.e.

			if (!page)
				page_cache_sync_readahead();
			page = find_get_page();
			if (page && PageReadahead(page))
				page_cache_async_readahead();

This is because PG_readahead could be set by a sync readahead for the
_current_ newly faulted in page, and the readahead code simply expects one
more callback on the same page to start the async readahead.  If the
caller fails to do so, it will miss the PG_readahead bits and never able
to start an async readahead.

Eliminate this insane constraint by piggy-backing the async part into the
current readahead window.

Now if an async readahead should be started immediately after a sync one,
the readahead logic itself will do it.  So the following code becomes
valid: (the 'else' in particular)

			if (!page)
				page_cache_sync_readahead();
			else if (PageReadahead(page))
				page_cache_async_readahead();

Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make sure interleaved readahead size is larger than request size.  This
also makes the readahead window grow up more quickly.
Reported-by: NXu Chenfeng <xcf@ustc.edu.cn>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

(hit_readahead_marker != 0) means the page at @offset is present, so we
can search for non-present page starting from @offset+1.
Reported-by: NXu Chenfeng <xcf@ustc.edu.cn>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Just in case someone aggressively sets a huge readahead size.

Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Impact: code simplification.

Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This makes the performance impact of possible mmap_miss wrap around to be
temporary and tolerable: i.e.  MMAP_LOTSAMISS=100 extra readarounds.

Otherwise if ever mmap_miss wraps around to negative, it takes INT_MAX
cache misses to bring it back to normal state.  During the time mmap
readaround will be _enabled_ for whatever wild random workload.  That's
almost permanent performance impact.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* create mm/init-mm.c, move init_mm there
* remove INIT_MM, initialize init_mm with C99 initializer
* unexport init_mm on all arches:

  init_mm is already unexported on x86.

  One strange place is some OMAP driver (drivers/video/omap/) which
  won't build modular, but it's already wants get_vm_area() export.
  Somebody should look there.

[akpm@linux-foundation.org: add missing #includes]
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13484

Peer reported:
| The bug is introduced from kernel 2.6.27, if E820 table reserve the memory
| above 4G in 32bit OS(BIOS-e820: 00000000fff80000 - 0000000120000000
| (reserved)), system will report Int 6 error and hang up. The bug is caused by
| the following code in drivers/firmware/memmap.c, the resource_size_t is 32bit
| variable in 32bit OS, the BUG_ON() will be invoked to result in the Int 6
| error. I try the latest 32bit Ubuntu and Fedora distributions, all hit this
| bug.
|======
|static int firmware_map_add_entry(resource_size_t start, resource_size_t end,
|                  const char *type,
|                  struct firmware_map_entry *entry)

and it only happen with CONFIG_PHYS_ADDR_T_64BIT is not set.

it turns out we need to pass u64 instead of resource_size_t for that.

[akpm@linux-foundation.org: add comment]
Reported-and-tested-by: NPeer Chen <pchen@nvidia.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Do not take the size of a pointer to determine the size of the pointed-to
type.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Acked-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

PIT_TICK_RATE is currently defined in four architectures, but in three
different places.  While linux/timex.h is not the perfect place for it, it
is still a reasonable replacement for those drivers that traditionally use
asm/timex.h to get CLOCK_TICK_RATE and expect it to be the PIT frequency.

Note that for Alpha, the actual value changed from 1193182UL to 1193180UL.
 This is unlikely to make a difference, and probably can only improve
accuracy.  There was a discussion on the correct value of CLOCK_TICK_RATE
a few years ago, after which every existing instance was getting changed
to 1193182.  According to the specification, it should be
1193181.818181...
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Len Brown <lenb@kernel.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] fix compile error in arch/ia64/mm/extable.c

Merge branch 'timers-for-linus-migration' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus-migration' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timers: Logic to move non pinned timers
  timers: /proc/sys sysctl hook to enable timer migration
  timers: Identifying the existing pinned timers
  timers: Framework for identifying pinned timers
  timers: allow deferrable timers for intervals tv2-tv5 to be deferred

Fix up conflicts in kernel/sched.c and kernel/timer.c manually

Merge branch 'timers-for-linus-clockevents' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus-clockevents' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clockevent: export register_device and delta2ns
  clockevents: tick_broadcast_device can become static

Merge branch 'timers-for-linus-clocksource' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus-clocksource' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clocksource: prevent selection of low resolution clocksourse also for nohz=on
  clocksource: sanity check sysfs clocksource changes

Merge branch 'timers-for-linus-ntp' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus-ntp' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ntp: fix comment typos
  ntp: adjust SHIFT_PLL to improve NTP convergence

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1244 commits)
  pkt_sched: Rename PSCHED_US2NS and PSCHED_NS2US
  ipv4: Fix fib_trie rebalancing
  Bluetooth: Fix issue with uninitialized nsh.type in DTL-1 driver
  Bluetooth: Fix Kconfig issue with RFKILL integration
  PIM-SM: namespace changes
  ipv4: update ARPD help text
  net: use a deferred timer in rt_check_expire
  ieee802154: fix kconfig bool/tristate muckup
  bonding: initialization rework
  bonding: use is_zero_ether_addr
  bonding: network device names are case sensative
  bonding: elminate bad refcount code
  bonding: fix style issues
  bonding: fix destructor
  bonding: remove bonding read/write semaphore
  bonding: initialize before registration
  bonding: bond_create always called with default parameters
  x_tables: Convert printk to pr_err
  netfilter: conntrack: optional reliable conntrack event delivery
  list_nulls: add hlist_nulls_add_head and hlist_nulls_del
  ...

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (103 commits)
  powerpc: Fix bug in move of altivec code to vector.S
  powerpc: Add support for swiotlb on 32-bit
  powerpc/spufs: Remove unused error path
  powerpc: Fix warning when printing a resource_size_t
  powerpc/xmon: Remove unused variable in xmon.c
  powerpc/pseries: Fix warnings when printing resource_size_t
  powerpc: Shield code specific to 64-bit server processors
  powerpc: Separate PACA fields for server CPUs
  powerpc: Split exception handling out of head_64.S
  powerpc: Introduce CONFIG_PPC_BOOK3S
  powerpc: Move VMX and VSX asm code to vector.S
  powerpc: Set init_bootmem_done on NUMA platforms as well
  powerpc/mm: Fix a AB->BA deadlock scenario with nohash MMU context lock
  powerpc/mm: Fix some SMP issues with MMU context handling
  powerpc: Add PTRACE_SINGLEBLOCK support
  fbdev: Add PLB support and cleanup DCR in xilinxfb driver.
  powerpc/virtex: Add ml510 reference design device tree
  powerpc/virtex: Add Xilinx ML510 reference design support
  powerpc/virtex: refactor intc driver and add support for i8259 cascading
  powerpc/virtex: Add support for Xilinx PCI host bridge
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator/max1586: fix V3 gain calculation integer overflow
  regulator/max1586: support increased V3 voltage range
  regulator: lp3971 - fix driver link error when built-in.
  LP3971 PMIC regulator driver (updated and combined version)
  regulator: remove driver_data direct access of struct device
  regulator: Set MODULE_ALIAS for regulator drivers
  regulator: Support list_voltage for fixed voltage regulator
  regulator: Move regulator drivers to subsys_initcall()
  regulator: build fix for powerpc - renamed show_state
  regulator: add userspace-consumer driver
  Maxim 1586 regulator driver

ad6561df ("module: trim exception table on init
free.") put a bogus trim_init_extable() function into ia64 which didn't compile.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NTony Luck <tony.luck@intel.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (22 commits)
  nilfs2: support contiguous lookup of blocks
  nilfs2: add sync_page method to page caches of meta data
  nilfs2: use device's backing_dev_info for btree node caches
  nilfs2: return EBUSY against delete request on snapshot
  nilfs2: modify list of unsupported features in caveats
  nilfs2: enable sync_page method
  nilfs2: set bio unplug flag for the last bio in segment
  nilfs2: allow future expansion of metadata read out via get info ioctl
  NILFS2: Pagecache usage optimization on NILFS2
  nilfs2: remove nilfs_btree_operations from btree mapping
  nilfs2: remove nilfs_direct_operations from direct mapping
  nilfs2: remove bmap pointer operations
  nilfs2: remove useless b_low and b_high fields from nilfs_bmap struct
  nilfs2: remove pointless NULL check of bpop_commit_alloc_ptr function
  nilfs2: move get block functions in bmap.c into btree codes
  nilfs2: remove nilfs_bmap_delete_block
  nilfs2: remove nilfs_bmap_put_block
  nilfs2: remove header file for segment list operations
  nilfs2: eliminate removal list of segments
  nilfs2: add sufile function that can modify multiple segment usages
  ...

On Thu, May 28, 2009 at 10:59 AM, Mark Brown <broonie@opensource.wolfsonmicro.com> wrote:
> On Thu, May 28, 2009 at 07:15:16AM +0200, Philipp Zabel wrote:
>> The V3 regulator can be configured with an external resistor
>> connected to the feedback pin (R24 in the data sheet) to
>> increase the voltage range.
>>
>> For example, hx4700 has R24 = 3.32 kOhm to achieve a maximum
>> V3 voltage of 1.55 V which is needed for 624 MHz CPU frequency.
>>
>> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
>
> Looks good.
>
> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Thanks, but it turns out I hit a 32 bit integer overflow in
the gain calculation. I'd like to mend that with the following
patch. Now max_uV could be increased up to 4.294 V, enough to
charge LiPo cells.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Acked-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>

The V3 regulator can be configured with an external resistor
connected to the feedback pin (R24 in the data sheet) to
increase the voltage range.

For example, hx4700 has R24 = 3.32 kOhm to achieve a maximum
V3 voltage of 1.55 V which is needed for 624 MHz CPU frequency.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>

lp3971_i2c_remove' referenced in section `.data' of drivers/built-in.o:
defined in discarded section `.devexit.text' of drivers/built-in.o
Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>