Use a dedicated copy of the current power state since
we may have to adjust it on the fly.

v2: fix up redundant state sets
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use a dedicated copy of the current power state since
we may have to adjust it on the fly.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use a dedicated copy of the current power state since
we may have to adjust it on the fly.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Driver needs this information to validate power states.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This data will be needed for dpm on newer asics.

v2: fix typo in rebase
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When using UVD, the driver must switch to a special UVD power
state.  In the CS ioctl, switch to the power state and schedule
work to change the power state back, when the work comes up,
check if uvd is still busy and if not, switch back to the user
state, otherwise, reschedule the work.

Note:  We really need some better way to decide when to
switch out of the uvd power state.  Switching power states
while playback is active make uvd angry.

V2: fix locking.

V3: switch from timer to delayed work

V4: check fence driver for UVD jobs, reduce timeout to
    1 second and rearm timeout on activity

v5: rebase on new dpm tree

v6: rebase on interim uvd on demand changes

v7: fix UVD when DPM is disabled

v8: unify non-DPM and DPM UVD handling

v9: remove leftover idle work struct
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <deathsimple@vodafone.de>

v2: fix typo noticed by Dan Carpenter
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds dpm support for trinity asics.  This includes:
- clockgating
- powergating
- dynamic engine clock scaling
- dynamic voltage scaling

set radeon.dpm=1 to enable it.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds dpm support for sumo asics.  This includes:
- clockgating
- powergating
- dynamic engine clock scaling
- dynamic voltage scaling

set radeon.dpm=1 to enable it.

v2: fix indention
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>

This adds dpm support for btc asics.  This includes:
- clockgating
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2 switching (requires additional acpi support)

Set radeon.dpm=1 to enable.

v2: reduce stack usage
v3: attempt to fix state enable
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds dpm support for evergreen asics.  This includes:
- clockgating
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2 switching (requires additional acpi support)

Set radeon.dpm=1 to enable.

v2: reduce stack usage, rename ulv struct
v3: fix thermal interrupt check notices by Jerome
v4: fix state enable
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds dpm support for rv7xx asics.  This includes:
- clockgating
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2 switching

Set radeon.dpm=1 to enable.

v2: reduce stack usage
v3: fix 64 bit div
v4: fix state enable
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds dpm support for rv6xx asics.  This includes:
- clockgating
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2 switching

Set radeon.dpm=1 to enable.

v2: remove duplicate line
v3: fix thermal interrupt check noticed by Jerome
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

This adds dpm support for rs780/rs880 asics.  This includes:
- clockgating
- dynamic engine clock scaling
- dynamic voltage scaling

set radeon.dpm=1 to enable it.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These are shared by rs780/rs880, rv6xx, and newer chips.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Calculate the low and high watermarks based on the low and high
clocks for the current power state.  The dynamic pm hw will select
the appropriate watermark based on the internal dpm state.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Calculate the low and high watermarks based on the low and high
clocks for the current power state.  The dynamic pm hw will select
the appropriate watermark based on the internal dpm state.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Calculate the low and high watermarks based on the low and high
clocks for the current power state.  The dynamic pm hw will select
the appropriate watermark based on the internal dpm state.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

calculate the low and high watermarks based on the low and high
clocks for the current power state.  The dynamic pm hw will select
the appropriate watermark based on the internal dpm state.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds the common dpm (dynamic power management)
infrastructure:
- dpm callbacks
- dpm init/fini/suspend/resume
- dpm power state selection

No device specific code is enabled yet.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Has a different dpm controller than r600.

v2: rebase on gpu reset changes
v3: rebase on get_xclk changes
v4: update rptr/wtpr callbacks
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

dpm needs access to atombios data and command tables
for setup and calculation of a number of parameters.

v2: endian fix
v3: fix mc reg table bug
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is required for certain advanced functionality.

v2: save/restore list takes dword offsets
v3: rebase on gpu reset changes
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Avoids confusion and duplication.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: fix up for latest reset changes
v3: use CP for pt updates for now
v4: update for 2 level PTs
v5: update for ib_parse removal
v6: vm_flush api change
v7: rebase
v8: fix gfx ring function pointers
v9: fix vm_set_page function params
v10: update for compute changes
v11: cleanup for release
v12: update rptr/wptr callbacks
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The compute rings use RELEASE_MEM rather then EOP
packets for writing fences and there is no SYNC_PFP_ME
packet on the compute rings.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Type 2 packets are deprecated on CIK MEC and we should use
type 3 nop packets.  Setting the count field to the max value
(0x3fff) indicates that only one dword should be skipped
like a type 2 packet.

v2: add comment to code
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>