Use a switch for the sense key, and remove two pointless variables that
are only used once.

[mkp: Added UNMAP comment and removed good_bytes based on comment from
Damien]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Re-shuffle the code to be more efficient by not initializing variables
upfront (i.e. do it only when necessary).  Also replace the do_div calls
with calls to sectors_to_logical().

No functional change is introduced by this patch.

[mkp: bytes_to_logical()]
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix argument names and description of function documentation comments.
No functional change is introduced by this patch.

[mkp: verbify]
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

If sd_eh_action() decides to take the device offline there is
no point in returning FAILED, as taking the device offline
is the ultimate step in SCSI EH anyway.
So further escalation via SCSI EH is not likely to make a
difference and we can as well return SUCCESS.

Cc: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The current medium access timeout counter will be increased for
each command, so if there are enough failed commands we'll hit
the medium access timeout for even a single device failure and
the following kernel message is displayed:

sd H:C:T:L: [sdXY] Medium access timeout failure. Offlining disk!

Fix this by making the timeout per EH run, ie the counter will
only be increased once per device and EH run.

Fixes: 18a4d0a2 ("[SCSI] Handle disk devices which can not process medium access commands")
Cc: Ewan Milne <emilne@redhat.com>
Cc: Lawrence Obermann <loberman@redhat.com>
Cc: Benjamin Block <bblock@linux.vnet.ibm.com>
Cc: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This reverts commit 0dba1314. It causes
leaking of device numbers for SCSI when SCSI registers multiple gendisks
for one request_queue in succession. It can be easily reproduced using
Omar's script [1] on kernel with CONFIG_DEBUG_TEST_DRIVER_REMOVE.
Furthermore the protection provided by this commit is not needed anymore
as the problem it was fixing got also fixed by commit 165a5e22
"block: Move bdi_unregister() to del_gendisk()".

[1]: http://marc.info/?l=linux-block&m=148554717109098&w=2Signed-off-by: NJan Kara <jack@suse.cz>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Tested-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

And switch all callers to use scsi_execute instead.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Remove bogus evaluations of retval and sshdr when the device is offline,
and fix a possible NULL pointer dereference by allocating the 8 byte
sized sense header on stack.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

On an allocation failure of gd, the current exit path is via
out_free_devt which leaves sdpk still allocated and hence it gets
leaked. Fix this by correcting the order of resource free'ing with a
change in the error exit path labels.

Detected by CoverityScan, CID#1399519 ("Resource Leak")

Fixes: 0dba1314 ("scsi, block: fix duplicate bdi name registration crashes")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NBart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fixes the following sparse warning:

drivers/scsi/sd.c:3087:6: warning:
 symbol 'sd_devt_release' was not declared. Should it be static?
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Warnings of the following form occur because scsi reuses a devt number
while the block layer still has it referenced as the name of the bdi
[1]:

 WARNING: CPU: 1 PID: 93 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x62/0x80
 sysfs: cannot create duplicate filename '/devices/virtual/bdi/8:192'
 [..]
 Call Trace:
  dump_stack+0x86/0xc3
  __warn+0xcb/0xf0
  warn_slowpath_fmt+0x5f/0x80
  ? kernfs_path_from_node+0x4f/0x60
  sysfs_warn_dup+0x62/0x80
  sysfs_create_dir_ns+0x77/0x90
  kobject_add_internal+0xb2/0x350
  kobject_add+0x75/0xd0
  device_add+0x15a/0x650
  device_create_groups_vargs+0xe0/0xf0
  device_create_vargs+0x1c/0x20
  bdi_register+0x90/0x240
  ? lockdep_init_map+0x57/0x200
  bdi_register_owner+0x36/0x60
  device_add_disk+0x1bb/0x4e0
  ? __pm_runtime_use_autosuspend+0x5c/0x70
  sd_probe_async+0x10d/0x1c0
  async_run_entry_fn+0x39/0x170

This is a brute-force fix to pass the devt release information from
sd_probe() to the locations where we register the bdi,
device_add_disk(), and unregister the bdi, blk_cleanup_queue().

Thanks to Omar for the quick reproducer script [2]. This patch survives
where an unmodified kernel fails in a few seconds.

[1]: https://marc.info/?l=linux-scsi&m=147116857810716&w=4
[2]: http://marc.info/?l=linux-block&m=148554717109098&w=2

Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Jan Kara <jack@suse.cz>
Reported-by: NOmar Sandoval <osandov@osandov.com>
Tested-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

->done can only be called for fs requests, so no need to check again here.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

And require all drivers that want to support BLOCK_PC to allocate it
as the first thing of their private data.  To support this the legacy
IDE and BSG code is switched to set cmd_size on their queues to let
the block layer allocate the additional space.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

This patch reverts commit f80de881 and avoids that sending a
WRITE SAME command to the iSCSI initiator triggers the following:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000014
TARGET_CORE[iSCSI]: Expected Transfer Length: 260096 does not match SCSI CDB Length: 512 for SAM Opcode: 0x41
IP: iscsi_tcp_segment_done+0x20b/0x310 [libiscsi_tcp]

Oops: 0000 [#1] SMP
Modules linked in: target_core_user uio target_core_iblock target_core_file iscsi_target_mod target_core_mod netconsole configfs crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 crypto_simd cryptd glue_helper virtio_console virtio_rng virtio_balloon serio_raw i2c_piix4 acpi_cpufreq button iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ext4 jbd2 mbcache virtio_blk virtio_net psmouse floppy drm_kms_helper syscopyarea
sysfillrect sysimgblt fb_sys_fops ttm drm virtio_pci
CPU: 2 PID: 5 Comm: kworker/u8:0 Not tainted 4.10.0-rc5-debug+ #3
Workqueue: iscsi_q_0 iscsi_xmitworker [libiscsi]
RIP: 0010:iscsi_tcp_segment_done+0x20b/0x310 [libiscsi_tcp]
Call Trace:
 iscsi_sw_tcp_xmit_segment+0x84/0x120 [iscsi_tcp]
 iscsi_sw_tcp_pdu_xmit+0x51/0x180 [iscsi_tcp]
 iscsi_tcp_task_xmit+0xb3/0x290 [libiscsi_tcp]
 iscsi_xmit_task+0x4e/0xc0 [libiscsi]
 iscsi_xmitworker+0x243/0x330 [libiscsi]
 process_one_work+0x1d8/0x4b0
 worker_thread+0x49/0x4a0
 kthread+0x102/0x140

Fixes: f80de881 ("sd: remove __data_len hack for WRITE SAME")
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Jens Axboe <axboe@fb.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Chris Leech <cleech@redhat.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

In sd.c there are two comment references to 'struct scsi_device *sdp' as
an argument.  One of the references has a typo and the other should be a
reference to 'struct device *dev' instead.

Fixed by correcting the typo in the first and changing the explanation
in the second.
Signed-off-by: NJohn Pittman <jpittman@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There is no good match of the zoned field of the block device
characteristics page for host-managed devices. For these devices, the
zoning model is derived directly from the device type. So ignore the
zoned field for these drives.

[mkp: typo]
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Zoned block devices force the use of READ/WRITE(16) commands by setting
sdkp->use_16_for_rw and clearing sdkp->use_10_for_rw. This result in
DPOFUA always being disabled for these drives as the assumed use of
the deprecated READ/WRITE(6) commands only looks at sdkp->use_10_for_rw.
Strenghten the test by also checking that sdkp->use_16_for_rw is false.
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Now that we have the blk_rq_payload_bytes helper available to determine
the actual I/O size we don't need to mess around with __data_len for
WRITE SAME.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@fb.com>

This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.
Requested-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of allocating a single unused biovec for discard requests, send
them down without any payload.  Instead we allow the driver to add a
"special" payload using a biovec embedded into struct request (unioned
over other fields never used while in the driver), and overloading
the number of segments for this case.

This has a couple of advantages:

 - we don't have to allocate the bio_vec
 - the amount of special casing for discard requests in the block
   layer is significantly reduced
 - using this same scheme for other request types is trivial,
   which will be important for implementing the new WRITE_ZEROES
   op on devices where it actually requires a payload (e.g. SCSI)
 - we can get rid of playing games with the request length, as
   we'll never touch it and completions will work just fine
 - it will allow us to support ranged discard operations in the
   future by merging non-contiguous discard bios into a single
   request
 - last but not least it removes a lot of code

This patch is the common base for my WIP series for ranges discards and to
remove discard_zeroes_data in favor of always using REQ_OP_WRITE_ZEROES,
so it would be good to get it in quickly.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

In kernel we have defined specifier (%*ph[C]) to dump small buffers in a
hex format. Replace custom approach by a generic one.

Cc: Jon Mason <jonmason@broadcom.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Now that we don't need the common flags to overflow outside the range
of a 32-bit type we can encode them the same way for both the bio and
request fields.  This in addition allows us to place the operation
first (and make some room for more ops while we're at it) and to
stop having to shift around the operation values.

In addition this allows passing around only one value in the block layer
instead of two (and eventuall also in the file systems, but we can do
that later) and thus clean up a lot of code.

Last but not least this allows decreasing the size of the cmd_flags
field in struct request to 32-bits.  Various functions passing this
value could also be updated, but I'd like to avoid the churn for now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

A lot of the REQ_* flags are only used on struct requests, and only of
use to the block layer and a few drivers that dig into struct request
internals.

This patch adds a new req_flags_t rq_flags field to struct request for
them, and thus dramatically shrinks the number of common requests.  It
also removes the unfortunate situation where we have to fit the fields
from the same enum into 32 bits for struct bio and 64 bits for
struct request.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NShaun Tancheff <shaun.tancheff@seagate.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Implement ZBC support functions to setup zoned disks, both
host-managed and host-aware models. Only zoned disks that satisfy
the following conditions are supported:
1) All zones are the same size, with the exception of an eventual
   last smaller runt zone.
2) For host-managed disks, reads are unrestricted (reads are not
   failed due to zone or write pointer alignement constraints).
Zoned disks that do not satisfy these 2 conditions are setup with
a capacity of 0 to prevent their use.

The function sd_zbc_read_zones, called from sd_revalidate_disk,
checks that the device satisfies the above two constraints. This
function may also change the disk capacity previously set by
sd_read_capacity for devices reporting only the capacity of
conventional zones at the beginning of the LBA range (i.e. devices
reporting rc_basis set to 0).

The capacity message output was moved out of sd_read_capacity into
a new function sd_print_capacity to include this eventual capacity
change by sd_zbc_read_zones. This new function also includes a call
to sd_zbc_print_zones to display the number of zones and zone size
of the device.
Signed-off-by: NHannes Reinecke <hare@suse.de>

[Damien: * Removed zone cache support
         * Removed mapping of discard to reset write pointer command
         * Modified sd_zbc_read_zones to include checks that the
           device satisfies the kernel constraints
         * Implemeted REPORT ZONES setup and post-processing based
           on code from Shaun Tancheff <shaun.tancheff@seagate.com>
         * Removed confusing use of 512B sector units in functions
           interface]
Signed-off-by: NDamien Le Moal <damien.lemoal@hgst.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NShaun Tancheff <shaun.tancheff@seagate.com>
Tested-by: NShaun Tancheff <shaun.tancheff@seagate.com>
Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

These should go together with the rest of the T10 protection information
defintions.

[mkp: s/T10_DIF/T10_PI/]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

These only work if the we use the same initiator ID for all path,
which might not be true if we use different protocols, or even just
different HBAs.

Instead dm-mpath will grow support to register all path manually
later in this series.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

For block drivers that specify a parent device, convert them to use
device_add_disk().

This conversion was done with the following semantic patch:

    @@
    struct gendisk *disk;
    expression E;
    @@

    - disk->driverfs_dev = E;
    ...
    - add_disk(disk);
    + device_add_disk(E, disk);

    @@
    struct gendisk *disk;
    expression E1, E2;
    @@

    - disk->driverfs_dev = E1;
    ...
    E2 = disk;
    ...
    - add_disk(E2);
    + device_add_disk(E1, E2);

...plus some manual fixups for a few missed conversions.

Cc: Jens Axboe <axboe@fb.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

This adds a REQ_OP_FLUSH operation that is sent to request_fn
based drivers by the block layer's flush code, instead of
sending requests with the request->cmd_flags REQ_FLUSH bit set.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This patch drops the compat definition of req_op where it matches
the rq_flag_bits definitions, and drops the related old and compat
code that allowed users to set either the op or flags for the operation.

We also then store the operation in the bi_rw/cmd_flags field similar
to how we used to store the bio ioprio where it sat in the upper bits
of the field.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The req operation REQ_OP is separated from the rq_flag_bits
definition. This converts the block layer drivers to
use req_op to get the op from the request struct.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

For historic reasons, io_opt is in bytes and max_sectors in block layer
sectors. This interface inconsistency is error prone and should be
fixed. But for 4.4--4.7 let's make the unit difference explicit via a
wrapper function.

Fixes: d0eb20a8 ("sd: Optimal I/O size is in bytes, not sectors")
Cc: stable@vger.kernel.org # 4.4+
Reported-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NAndrew Patterson <andrew.patterson@hpe.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

sd_check_events() is called asynchronously, and might race
with device removal. So always take a disk reference when
processing the event to avoid the device being removed while
the event is processed.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Switch to the newer interface, instead of using blk_queue_flush()
directly.
Signed-off-by: NJens Axboe <axboe@fb.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>

We could kmalloc() the payload, so need the offset in page.
Signed-off-by: NMing Lin <ming.l@ssi.samsung.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

The patch "scsi: rescan VPD attributes" introduced a regression in which
devices that don't support VPD were being scanned for VPD attributes
anyway.  This could cause issues for some devices and should be avoided
so the check for scsi_level has been moved out of scsi_add_lun and into
scsi_attach_vpd so that all callers will not scan VPD for devices that
don't support it.

[mkp: Merge fix]

Fixes: 09e2b0b1 ("scsi: rescan VPD attributes")
Cc: <stable@vger.kernel.org> #v4.5+
Suggested-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During revalidate we check whether device capacity has changed before we
decide whether to output disk information or not.

The check for old capacity failed to take into account that we scaled
sdkp->capacity based on the reported logical block size. And therefore
the capacity test would always fail for devices with sectors bigger than
512 bytes and we would print several copies of the same discovery
information.

Avoid scaling sdkp->capacity and instead adjust the value on the fly
when setting the block device capacity and generating fake C/H/S
geometry.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Cc: <stable@vger.kernel.org>
Reported-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NHannes Reinicke <hare@suse.de>
Reviewed-by: NEwan Milne <emilne@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Commit 39773722 ("sd: Make discard granularity match logical block
size when LBPRZ=1") accidentally set the granularity to one byte instead
of one logical block on devices that provide deterministic zeroes after
UNMAP.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reported-by: NMike Snitzer <snitzer@redhat.com>
Reviewed-by: NEwan Milne <emilne@redhat.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Fixes: 39773722
Cc: <stable@vger.kernel.org> #v4.4+

Commit 39773722 ("sd: Make discard granularity match logical block
size when LBPRZ=1") accidentally set the granularity to one byte instead
of one logical block on devices that provide deterministic zeroes after
UNMAP.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reported-by: NMike Snitzer <snitzer@redhat.com>
Reviewed-by: NEwan Milne <emilne@redhat.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Fixes: 39773722
Cc: <stable@vger.kernel.org> #v4.4+

When a storage device rejects a WRITE SAME command we will disable write
same functionality for the device and return -EREMOTEIO to the block
layer. -EREMOTEIO will in turn prevent DM from retrying the I/O and/or
failing the path.

Yiwen Jiang discovered a small race where WRITE SAME requests issued
simultaneously would cause -EIO to be returned. This happened because
any requests being prepared after WRITE SAME had been disabled for the
device caused us to return BLKPREP_KILL. The latter caused the block
layer to return -EIO upon completion.

To overcome this we introduce BLKPREP_INVALID which indicates that this
is an invalid request for the device. blk_peek_request() is modified to
return -EREMOTEIO in that case.
Reported-by: NYiwen Jiang <jiangyiwen@huawei.com>
Suggested-by: NMike Snitzer <snitzer@redhat.com>
Reviewed-by: NHannes Reinicke <hare@suse.de>
Reviewed-by: NEwan Milne <emilne@redhat.com>
Reviewed-by: NYiwen Jiang <jiangyiwen@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>