Use devm_*() functions to make cleanup paths simpler,
and remove redundant return value check of platform_get_resource()
because the value is checked by devm_ioremap_resource().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Signed-off-by: NJean-Jacques Hiblot <jjhiblot@traphandler.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

This patch adds the support of the I2C_SMBUS_I2C_BLOCK_DATA transaction
type for the iSMT SMBus Controller.
Signed-off-by: NRobert Valiquette <robert.valiquette@intel.com>
Acked-by: NSeth Heasley <seth.heasley@intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

OSIF, Open Source InterFace, is a USB based i2c bus master.  The
origional design was based on i2c-tiny-usb, but more modern versions
of the firmware running on the MegaAVR microcontroller use a different
protocol over the USB. This code is based on Barry Carter
<barry.carter@gmail.com> driver.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

The RobotFuzz device is not compatible with i2c-tiny-usb. Remove its
entry from the USB table so that the new correct driver can be used.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Since 93abe8e4 (clk: add non CONFIG_HAVE_CLK routines) code using clk.h
like this platform driver need not depend on HAVE_CLK. Also, remove a
redundant clk.h include from core driver.
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

The Nomadik I2C is now configured from the device tree on all platforms
using this controller. Delete the platform data header and move the
definitions into the driver so it is all contained in one single file.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

The Nomadik I2C controller needs to have the slave set-up time
configured based off the clock used to drive the I2C bus block.
Currently this is done with static assignments assuming that the
block is clocked 48MHz which is pretty likely to be bug-prone.
Calculate the SLSU from the equation given in the datasheet
instead.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

cppcheck rightfully says:

drivers/i2c/busses/i2c-viperboard.c:169: style: Variable 'bytes_xfer' is assigned a value that is never used.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NLars Poeschel <poeschel@lemonage.de>

Simplified the probe and remove functions using devm_* functions
Signed-off-by: NKedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

IRQ handler has to be register first before IRQ
is enabled in xiic_reinit().
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Code changes to fix checkpatch warnings listed below.
- WARNING: please, no space before tabs
- WARNING: quoted string split across lines
Signed-off-by: NKedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Use devm_request_region() to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Use devm_kzalloc() functions to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NLars Poeschel <poeschel@lemonage.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

smatch rightfully says:
drivers/i2c/busses/i2c-imx.c:610 i2c_imx_probe() info: why not propagate 'irq' from platform_get_irq() instead of (-2)?
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

For Exynos4 and Exynos5 SoCs from Samsung the i2c clock is based
on a fixed 66 MHz peripheral clock, and therefore is completely
independent of the cpu frequency.
Thus, registering for a CPU freq notifier is very wasteful.

This patch modifes the code such that, i2c bus registers to
cpu_freq_transition only if CONFIG_CPU_FREQ_S3C24XX is enabled.

This change should save a bunch of cpufreq transitions calls
which does not apply to exynos SoCs.
Signed-off-by: NNaveen Krishna Chatradhi <ch.naveen@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

This patch adds polling mode support for i2c-s3c2410 driver.The
SATA PHY controller's CMU and TRSV block's are of I2C register
map in exynos5250.These blocks can be configured using i2c.

But i2c controller instance on which these block's sits lacks an
interrupt line.Also the current i2c-s3c2410 driver is only interrupt
driven, thus a polling mode support is required in the driver for
supporting this controller. This patch adds this support to the driver.
Signed-off-by: NVasanth Ananthan <vasanth.a@samsung.com>
Signed-off-by: NYuvaraj Kumar C D <yuvaraj.cd@samsung.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Hardware supported by the i2c sh_mobile and rcar drivers is only found
on SUPERH or ARCH_SHMOBILE platforms. Restrict non-COMPILE_TEST
compilation to them.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

If a reset GPIO support is specified, request the GPIO and get the chip
out of reset at probe time.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

This simplifies error and removal paths.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

This helps avoiding duplicate includes.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Tested with a r7s72100 genmai board acessing an eeprom.
Signed-off-by: NWolfram Sang <wsa@sang-engineering.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Commit "drm/ttm: Don't move non-existing data" didn't take the
swapped-out corner case into account. This patch corrects that.
Fixes blank screen after attempted suspend / hibernate on vmwgfx.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fix build error: qxl uses crc32 functions so it needs to select
CRC32.

Also use angle quotes around a kernel header file name.

drivers/built-in.o: In function `qxl_display_read_client_monitors_config':
(.text+0x19d754): undefined reference to `crc32_le'
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This patch adds support for RAPL on Intel ValleyView based SoC
platforms, such as Baytrail.

Besides adding CPU ID, special energy unit encoding is handled
for ValleyView.
Signed-off-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

When configuring a default governor (via CONFIG_CPU_FREQ_DEFAULT_*) with the
intel_pstate driver, the desired default policy is not properly set. For
example, setting 'CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE' ends up with the
'powersave' policy being set.

Fix by configuring the correct default policy, if either 'powersave' or
'performance' are requested. Otherwise, fallback to what the driver originally
set via its 'init' routine.
Signed-off-by: NJason Baron <jbaron@akamai.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

There are cases where cpufreq_add_dev() may fail for some CPUs
during system resume. With the current code we will still have
sysfs cpufreq files for those CPUs and struct cpufreq_policy
would be already freed for them. Hence any operation on those
sysfs files would result in kernel warnings.

Example of problems resulting from resume errors (from Bjørn Mork):

WARNING: CPU: 0 PID: 6055 at fs/sysfs/file.c:343 sysfs_open_file+0x77/0x212()
missing sysfs attribute operations for kobject: (null)
Modules linked in: [stripped as irrelevant]
CPU: 0 PID: 6055 Comm: grep Tainted: G      D      3.13.0-rc2 #153
Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011
 0000000000000009 ffff8802327ebb78 ffffffff81380b0e 0000000000000006
 ffff8802327ebbc8 ffff8802327ebbb8 ffffffff81038635 0000000000000000
 ffffffff811823c7 ffff88021a19e688 ffff88021a19e688 ffff8802302f9310
Call Trace:
 [<ffffffff81380b0e>] dump_stack+0x55/0x76
 [<ffffffff81038635>] warn_slowpath_common+0x7c/0x96
 [<ffffffff811823c7>] ? sysfs_open_file+0x77/0x212
 [<ffffffff810386e3>] warn_slowpath_fmt+0x41/0x43
 [<ffffffff81182dec>] ? sysfs_get_active+0x6b/0x82
 [<ffffffff81182382>] ? sysfs_open_file+0x32/0x212
 [<ffffffff811823c7>] sysfs_open_file+0x77/0x212
 [<ffffffff81182350>] ? sysfs_schedule_callback+0x1ac/0x1ac
 [<ffffffff81122562>] do_dentry_open+0x17c/0x257
 [<ffffffff8112267e>] finish_open+0x41/0x4f
 [<ffffffff81130225>] do_last+0x80c/0x9ba
 [<ffffffff8112dbbd>] ? inode_permission+0x40/0x42
 [<ffffffff81130606>] path_openat+0x233/0x4a1
 [<ffffffff81130b7e>] do_filp_open+0x35/0x85
 [<ffffffff8113b787>] ? __alloc_fd+0x172/0x184
 [<ffffffff811232ea>] do_sys_open+0x6b/0xfa
 [<ffffffff811233a7>] SyS_openat+0xf/0x11
 [<ffffffff8138c812>] system_call_fastpath+0x16/0x1b

To fix this, remove those sysfs files or put the associated kobject
in case of such errors. Also, to make it simple, remove the cpufreq
sysfs links from all the CPUs (except for the policy->cpu) during
suspend, as that operation won't result in a loss of sysfs file
permissions and we can create those links during resume just fine.

Fixes: 5302c3fb ("cpufreq: Perform light-weight init/teardown during suspend/resume")
Reported-and-tested-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
[rjw: Changelog]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

In the case of both the submit_queues param and use_per_node_hctx param
are used. We limit the number af submit_queues to the number of online
nodes.

If the submit_queues is a multiple of nr_online_nodes, its trivial. Simply map
them to the nodes. For example: 8 submit queues are mapped as node0[0,1],
node1[2,3], ...
If uneven, we are left with an uneven number of submit_queues that must be
mapped. These are mapped toward the first node and onward. E.g. 5
submit queues mapped onto 4 nodes are mapped as node0[0,1], node1[2], ...
Signed-off-by: NMatias Bjorling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The defaults for the module is to instantiate itself with blk-mq and a
submit queue for each CPU node in the system.

To save resources, initialize instead with a single submit queue.
Signed-off-by: NMatias Bjorling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Some pstore backing devices use on board flash as persistent
storage. These have limited numbers of write cycles so it
is a poor idea to use them from high frequency operations.
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds a check on the output buffer with access_ok(VERIFY_WRITE, ...)
to ensure the whole buffer is in userspace memory before using the
pointer in uverbs functions.  If the buffer or a subset of it is not
valid, returns -EFAULT to the caller.

This will also catch invalid buffer before the final call to
copy_to_user() which happen late in most uverb functions.

Just like the check in read(2) syscall, it's a sanity check to detect
invalid parameters provided by userspace. This particular check was added
in vfs_read() by Linus Torvalds for v2.6.12 with following commit message:

https://git.kernel.org/cgit/linux/kernel/git/tglx/history.git/commit/?id=fd770e66c9a65b14ce114e171266cf6f393df502

  Make read/write always do the full "access_ok()" tests.

  The actual user copy will do them too, but only for the
  range that ends up being actually copied. That hides
  bugs when the range has been clamped by file size or other
  issues.

Note: there's no need to check input buffer since vfs_write() already does
access_ok(VERIFY_READ, ...) as part of write() syscall.

Link: http://marc.info/?i=cover.1387273677.git.ydroneaud@opteya.comSigned-off-by: NYann Droneaud <ydroneaud@opteya.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Since ib_copy_from_udata() doesn't check yet the available input data
length before accessing userspace memory, an explicit check of this
length is required to prevent:

- reading past the user provided buffer,
- underflow when subtracting the expected command size from the input
  length.

This will ensure the newly added flow steering uverbs don't try to
process truncated commands.

Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com>
Signed-off-by: NYann Droneaud <ydroneaud@opteya.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

If the flow_spec items parsed count does not match the number of items
declared in the flow_attr command, or if not all bytes are used for
flow_spec items (eg. trailing garbage), a log message is reported and
the function leave through the error path. Unfortunately the error
code is currently not set.

This patch set error code to -EINVAL in such cases, so that the error
is reported to userspace instead of silently fail.

Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com>
Signed-off-by: NYann Droneaud <ydroneaud@opteya.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

As noted by Daniel Vetter in its article "Botching up ioctls"[1]

  "Check *all* unused fields and flags and all the padding for whether
   it's 0, and reject the ioctl if that's not the case.  Otherwise
   your nice plan for future extensions is going right down the
   gutters since someone *will* submit an ioctl struct with random
   stack garbage in the yet unused parts. Which then bakes in the ABI
   that those fields can never be used for anything else but garbage."

It's important to ensure that reserved fields are set to known value,
so that it will be possible to use them latter to extend the ABI.

The same reasonning apply to comp_mask field present in newer uverbs
command: per commit 22878dbc ("IB/core: Better checking of
userspace values for receive flow steering"), unsupported values in
comp_mask are rejected.

[1] http://blog.ffwll.ch/2013/11/botching-up-ioctls.html

Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com>
Signed-off-by: NYann Droneaud <ydroneaud@opteya.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Just like the check added to create_flow in 22878dbc ("IB/core:
Better checking of userspace values for receive flow steering"),
comp_mask must be checked in destroy_flow too.

Since only empty comp_mask is currently supported, any other value
must be rejected.

This check was silently added in a previous patch[1] to move comp_mask
in extended command header, part of previous patchset[2] against
create/destroy_flow uverbs. The idea of moving comp_mask to the header
was discarded for the final patchset[3].

Unfortunately the check added in destroy_flow uverb was not integrated
in the final patchset.

[1] http://marc.info/?i=40175eda10d670d098204da6aa4c327a0171ae5f.1381510045.git.ydroneaud@opteya.com
[2] http://marc.info/?i=cover.1381510045.git.ydroneaud@opteya.com
[3] http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.com

Cc: Matan Barak <matanb@mellanox.com>
Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com>
Signed-off-by: NYann Droneaud <ydroneaud@opteya.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

As noted by Daniel Vetter in its article "Botching up ioctls"[1]

  "Check *all* unused fields and flags and all the padding for whether
   it's 0, and reject the ioctl if that's not the case.  Otherwise
   your nice plan for future extensions is going right down the
   gutters since someone *will* submit an ioctl struct with random
   stack garbage in the yet unused parts. Which then bakes in the ABI
   that those fields can never be used for anything else but garbage."

It's important to ensure that reserved fields are set to known value,
so that it will be possible to use them latter to extend the ABI.

The same reasonning apply to comp_mask field present in newer uverbs
command: per commit 22878dbc ("IB/core: Better checking of
userspace values for receive flow steering"), unsupported values in
comp_mask are rejected.

[1] http://blog.ffwll.ch/2013/11/botching-up-ioctls.html

Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com>
Signed-off-by: NYann Droneaud <ydroneaud@opteya.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Trying to have a ternary operator to choose between NULL (or 0) and the
real pointer value in invocations leads to an impossible choice between
a sparse error about a literal 0 used as a NULL pointer, and a gcc
warning about "pointer/integer type mismatch in conditional expression."

Rather than clutter the source with more casts, move the ternary
operator into a new INIT_UDATA_BUF_OR_NULL() macro, which makes it
easier to use and simplifies its callers.
Reported-by: NYann Droneaud <ydroneaud@opteya.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Fixes gfx corruption on certain TN/RL parts.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=60389Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This patch fixes a possible scsi_host reference leak in qlt_lport_register(),
when a non zero return from the passed (*callback) does not call drop the
local reference via scsi_host_put() before returning.

This currently does not effect existing tcm_qla2xxx code as the passed callback
will never fail, but fix this up regardless for future code.

Cc: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

lun->lun_ref is also initialized in core_tpg_post_addlun, so it doesn't
need to be done in core_tpg_setup_virtual_lun0.

(nab: Drop left-over percpu_ref_cancel_init in failure path)
Signed-off-by: NAndy Grover <agrover@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>