The fake SIGSTOP during attach has numerous problems. PTRACE_SEIZE
is already fine, but we have basically the same problems is SIGSTOP
is sent on auto-attach, the tracer can't know if this signal signal
should be cancelled or not.

Change ptrace_event() to set JOBCTL_TRAP_STOP if the new child is
PT_SEIZED, this triggers the PTRACE_EVENT_STOP report.

Thereafter a PT_SEIZED task can never report the bogus SIGSTOP.

Test-case:

	#define PTRACE_SEIZE		0x4206
	#define PTRACE_SEIZE_DEVEL	0x80000000
	#define PTRACE_EVENT_STOP	7
	#define WEVENT(s)		((s & 0xFF0000) >> 16)

	int main(void)
	{
		int child, grand_child, status;
		long message;

		child = fork();
		if (!child) {
			kill(getpid(), SIGSTOP);
			fork();
			assert(0);
			return 0x23;
		}

		assert(ptrace(PTRACE_SEIZE, child, 0,PTRACE_SEIZE_DEVEL) == 0);
		assert(wait(&status) == child);
		assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGSTOP);

		assert(ptrace(PTRACE_SETOPTIONS, child, 0, PTRACE_O_TRACEFORK) == 0);

		assert(ptrace(PTRACE_CONT, child, 0,0) == 0);
		assert(waitpid(child, &status, 0) == child);
		assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGTRAP);
		assert(WEVENT(status) == PTRACE_EVENT_FORK);

		assert(ptrace(PTRACE_GETEVENTMSG, child, 0, &message) == 0);
		grand_child = message;

		assert(waitpid(grand_child, &status, 0) == grand_child);
		assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGTRAP);
		assert(WEVENT(status) == PTRACE_EVENT_STOP);

		kill(child, SIGKILL);
		kill(grand_child, SIGKILL);
		return 0;
	}
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NTejun Heo <tj@kernel.org>

If the new child is traced, do_fork() adds the pending SIGSTOP.
It assumes that either it is traced because of auto-attach or the
tracer attached later, in both cases sigaddset/set_thread_flag is
correct even if SIGSTOP is already pending.

Now that we have PTRACE_SEIZE this is no longer right in the latter
case. If the tracer does PTRACE_SEIZE after copy_process() makes the
child visible the queued SIGSTOP is wrong.

We could check PT_SEIZED bit and change ptrace_attach() to set both
PT_PTRACED and PT_SEIZED bits simultaneously but see the next patch,
we need to know whether this child was auto-attached or not anyway.

So this patch simply moves this code to ptrace_init_task(), this
way we can never race with ptrace_attach().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NTejun Heo <tj@kernel.org>

new_child->jobctl is not initialized during the fork, it is copied
from parent->jobctl. Currently this is harmless, the forking task
is running and copy_process() can't succeed if signal_pending() is
true, so only JOBCTL_STOP_DEQUEUED can be copied. Still this is a
bit fragile, it would be more clean to set ->jobctl = 0 explicitly.

Also, check ->ptrace != 0 instead of PT_PTRACED, move the
CONFIG_HAVE_HW_BREAKPOINT code up.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NTejun Heo <tj@kernel.org>

has_stopped_jobs() naively checks task_is_stopped(group_leader). This
was always wrong even without ptrace, group_leader can be dead. And
given that ptrace can change the state to TRACED this is wrong even
in the single-threaded case.

Change the code to check SIGNAL_STOP_STOPPED and simplify the code,
retval + break/continue doesn't make this trivial code more readable.

We could probably add the usual "|| signal->group_stop_count" check
but I don't think this makes sense, the task can start the group-stop
right after the check anyway.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NTejun Heo <tj@kernel.org>

When multithreaded program execs under ptrace,
all traced threads report WIFEXITED status, except for
thread group leader and the thread which execs.

Unless tracer tracks thread group relationship between tracees,
which is a nontrivial task, it will not detect that
execed thread no longer exists.

This patch allows tracer to figure out which thread
performed this exec, by requesting PTRACE_GETEVENTMSG
in PTRACE_EVENT_EXEC stop.

Another, samller problem which is solved by this patch
is that tracer now can figure out which of the several
concurrent execs in multithreaded program succeeded.
Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

wait_consider_task() checks same_thread_group(parent, real_parent),
this is the open-coded ptrace_reparented().

__ptrace_detach() remains the only function which has to check this by
hand, although we could reorganize the code to delay __ptrace_unlink.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NTejun Heo <tj@kernel.org>

Kill real_parent_is_ptracer() and update the callers to use
ptrace_reparented(), after the previous patch they do the same.

Remove the unnecessary ->ptrace != 0 check in get_signal_to_deliver(),
if ptrace_reparented() == T then the task must be ptraced.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NTejun Heo <tj@kernel.org>

ptrace_reparented() naively does parent != real_parent, this means
it returns true even if the tracer _is_ the real parent. This is per
process thing, not per-thread. The only reason ->real_parent can
point to the non-leader thread is that we have __WNOTHREAD.

Change it to check !same_thread_group(parent, real_parent).

It has two callers, and in both cases the current check does not
look right.

exit_notify: we should respect ->exit_signal if the exiting leader
is traced by any thread from the parent thread group. It is the
child of the whole group, and we are going to send the signal to
the whole group.

wait_task_zombie: without __WNOTHREAD do_wait() should do the same
for any thread, only sys_ptrace() is "bound" to the single thread.
However do_wait(WEXITED) succeeds but does not release a traced
natural child unless the caller is the tracer.

Test-case:

	void *tfunc(void *arg)
	{
		assert(ptrace(PTRACE_ATTACH, (long)arg, 0,0) == 0);
		pause();
		return NULL;
	}

	int main(void)
	{
		pthread_t thr;
		pid_t pid, stat, ret;

		pid = fork();
		if (!pid) {
			pause();
			assert(0);
		}

		assert(pthread_create(&thr, NULL, tfunc, (void*)(long)pid) == 0);

		assert(waitpid(-1, &stat, 0) == pid);
		assert(WIFSTOPPED(stat));

		kill(pid, SIGKILL);

		assert(waitpid(-1, &stat, 0) == pid);
		assert(WIFSIGNALED(stat) && WTERMSIG(stat) == SIGKILL);

		ret = waitpid(pid, &stat, 0);
		if (ret < 0)
			return 0;

		printf("WTF? %d is dead, but: wait=%d stat=%x\n",
				pid, ret, stat);

		return 1;
	}

Note that the main thread simply does

	pid = fork();
	kill(pid, SIGKILL);

and then without the patch wait4(WEXITED) succeeds twice and reports
WTERMSIG(stat) == SIGKILL.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NTejun Heo <tj@kernel.org>

Change de_thread() to set old_leader->exit_signal = -1. This is
good for the consistency, it is no longer the leader and all
sub-threads have exit_signal = -1 set by copy_process(CLONE_THREAD).

And this allows us to micro-optimize thread_group_leader(), it can
simply check exit_signal >= 0. This also makes sense because we
should move ->group_leader from task_struct to signal_struct.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NTejun Heo <tj@kernel.org>

__ptrace_detach() and do_notify_parent() set task->exit_signal = -1
to mark the task dead. This is no longer needed, nobody checks
exit_signal to detect the EXIT_DEAD task.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NTejun Heo <tj@kernel.org>

Upadate the last user of task_detached(), wait_task_zombie(), to
use thread_group_leader() and kill task_detached().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NTejun Heo <tj@kernel.org>

Change reparent_leader() to check ->exit_state instead of ->exit_signal,
this matches the similar EXIT_DEAD check in wait_consider_task() and
allows us to cleanup the do_notify_parent/task_detached logic.

task_detached() was really needed during reparenting before 9cd80bbb
"do_wait() optimization: do not place sub-threads on ->children list"
to filter out the sub-threads. After this change task_detached(p) can
only be true if p is the dead group_leader and its parent ignores
SIGCHLD, in this case the caller of do_notify_parent() is going to
reap this task and it should set EXIT_DEAD.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NTejun Heo <tj@kernel.org>

Change other callers of do_notify_parent() to check the value it
returns, this makes the subsequent task_detached() unnecessary.
Mark do_notify_parent() as __must_check.

Use thread_group_leader() instead of !task_detached() to check
if we need to notify the real parent in wait_task_zombie().

Remove the stale comment in release_task(). "just for sanity" is
no longer true, we have to set EXIT_DEAD to avoid the races with
do_wait().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NTejun Heo <tj@kernel.org>

__ptrace_detach() relies on the current obscure behaviour of
do_notify_parent(tsk) which changes tsk->exit_signal if this child
should be silently reaped. That is why we check task_detached(), it
is true if the task is sub-thread, or it is the group_leader but
its exit_signal was changed by do_notify_parent().

This is confusing, change the code to rely on !thread_group_leader()
or the value returned by do_notify_parent().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NTejun Heo <tj@kernel.org>

Kill tracehook_notify_death(), reimplement the logic in its caller,
exit_notify().

Also, change the exec_id's check to use thread_group_leader() instead
of task_detached(), this is more clear. This logic only applies to
the exiting leader, a sub-thread must never change its exit_signal.

Note: when the traced group leader exits the exit_signal-or-SIGCHLD
logic looks really strange:

	- we notify the tracer even if !thread_group_empty() but
	   do_wait(WEXITED) can't work until all threads exit

	- if the tracer is real_parent, it is not clear why can't
	  we use ->exit_signal event if !thread_group_empty()

-v2: do not try to fix the 2nd oddity to avoid the subtle behavior
     change mixed with reorganization, suggested by Tejun.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NTejun Heo <tj@kernel.org>

- change do_notify_parent() to return a boolean, true if the task should
  be reaped because its parent ignores SIGCHLD.

- update the only caller which checks the returned value, exit_notify().

This temporary uglifies exit_notify() even more, will be cleanuped by
the next change.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NTejun Heo <tj@kernel.org>

tracehook.h is on the way out.  Rename tracehook_tracer_task() to
ptrace_parent() and move it from tracehook.h to ptrace.h.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

At this point, tracehooks aren't useful to mainline kernel and mostly
just add an extra layer of obfuscation.  Although they have comments,
without actual in-kernel users, it is difficult to tell what are their
assumptions and they're actually trying to achieve.  To mainline
kernel, they just aren't worth keeping around.

This patch kills the following clone and exec related tracehooks.

	tracehook_prepare_clone()
	tracehook_finish_clone()
	tracehook_report_clone()
	tracehook_report_clone_complete()
	tracehook_unsafe_exec()

The changes are mostly trivial - logic is moved to the caller and
comments are merged and adjusted appropriately.

The only exception is in check_unsafe_exec() where LSM_UNSAFE_PTRACE*
are OR'd to bprm->unsafe instead of setting it, which produces the
same result as the field is always zero on entry.  It also tests
p->ptrace instead of (p->ptrace & PT_PTRACED) for consistency, which
also gives the same result.

This doesn't introduce any behavior change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

At this point, tracehooks aren't useful to mainline kernel and mostly
just add an extra layer of obfuscation.  Although they have comments,
without actual in-kernel users, it is difficult to tell what are their
assumptions and they're actually trying to achieve.  To mainline
kernel, they just aren't worth keeping around.

This patch kills the following trivial tracehooks.

* Ones testing whether task is ptraced.  Replace with ->ptrace test.

	tracehook_expect_breakpoints()
	tracehook_consider_ignored_signal()
	tracehook_consider_fatal_signal()

* ptrace_event() wrappers.  Call directly.

	tracehook_report_exec()
	tracehook_report_exit()
	tracehook_report_vfork_done()

* ptrace_release_task() wrapper.  Call directly.

	tracehook_finish_release_task()

* noop

	tracehook_prepare_release_task()
	tracehook_report_death()

This doesn't introduce any behavior change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

Move SIGTRAP on exec(2) logic from tracehook_report_exec() to
ptrace_event().  This is part of changes to make ptrace_event()
smarter and handle ptrace event related details in one place.

This doesn't introduce any behavior change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

This patch implements ptrace_event_enabled() which tests whether a
given PTRACE_EVENT_* is enabled and use it to simplify ptrace_event()
and tracehook_prepare_clone().

PT_EVENT_FLAG() macro is added which calculates PT_TRACE_* flag from
PTRACE_EVENT_*.  This is used to define PT_TRACE_* flags and by
ptrace_event_enabled() to find the matching flag.

This is used to make ptrace_event() and tracehook_prepare_clone()
simpler.

* ptrace_event() callers were responsible for providing mask to test
  whether the event was enabled.  This patch implements
  ptrace_event_enabled() and make ptrace_event() drop @mask and
  determine whether the event is enabled from @event.  Note that
  @event is constant and this conversion doesn't add runtime overhead.

  All conversions except tracehook_report_clone_complete() are
  trivial.  tracehook_report_clone_complete() used to use 0 for @mask
  (always enabled) but now tests whether the specified event is
  enabled.  This doesn't cause any behavior difference as it's
  guaranteed that the event specified by @trace is enabled.

* tracehook_prepare_clone() now only determines which event is
  applicable and use ptrace_event_enabled() for enable test.

This doesn't introduce any behavior change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

task_ptrace(task) simply dereferences task->ptrace and isn't even used
consistently only adding confusion.  Kill it and directly access
->ptrace instead.

This doesn't introduce any behavior change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

The previous patch implemented async notification for ptrace but it
only worked while trace is running.  This patch introduces
PTRACE_LISTEN which is suggested by Oleg Nestrov.

It's allowed iff tracee is in STOP trap and puts tracee into
quasi-running state - tracee never really runs but wait(2) and
ptrace(2) consider it to be running.  While ptracer is listening,
tracee is allowed to re-enter STOP to notify an async event.
Listening state is cleared on the first notification.  Ptracer can
also clear it by issuing INTERRUPT - tracee will re-trap into STOP
with listening state cleared.

This allows ptracer to monitor group stop state without running tracee
- use INTERRUPT to put tracee into STOP trap, issue LISTEN and then
wait(2) to wait for the next group stop event.  When it happens,
PTRACE_GETSIGINFO provides information to determine the current state.

Test program follows.

  #define PTRACE_SEIZE		0x4206
  #define PTRACE_INTERRUPT	0x4207
  #define PTRACE_LISTEN		0x4208

  #define PTRACE_SEIZE_DEVEL	0x80000000

  static const struct timespec ts1s = { .tv_sec = 1 };

  int main(int argc, char **argv)
  {
	  pid_t tracee, tracer;
	  int i;

	  tracee = fork();
	  if (!tracee)
		  while (1)
			  pause();

	  tracer = fork();
	  if (!tracer) {
		  siginfo_t si;

		  ptrace(PTRACE_SEIZE, tracee, NULL,
			 (void *)(unsigned long)PTRACE_SEIZE_DEVEL);
		  ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL);
	  repeat:
		  waitid(P_PID, tracee, NULL, WSTOPPED);

		  ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si);
		  if (!si.si_code) {
			  printf("tracer: SIG %d\n", si.si_signo);
			  ptrace(PTRACE_CONT, tracee, NULL,
				 (void *)(unsigned long)si.si_signo);
			  goto repeat;
		  }
		  printf("tracer: stopped=%d signo=%d\n",
			 si.si_signo != SIGTRAP, si.si_signo);
		  if (si.si_signo != SIGTRAP)
			  ptrace(PTRACE_LISTEN, tracee, NULL, NULL);
		  else
			  ptrace(PTRACE_CONT, tracee, NULL, NULL);
		  goto repeat;
	  }

	  for (i = 0; i < 3; i++) {
		  nanosleep(&ts1s, NULL);
		  printf("mother: SIGSTOP\n");
		  kill(tracee, SIGSTOP);
		  nanosleep(&ts1s, NULL);
		  printf("mother: SIGCONT\n");
		  kill(tracee, SIGCONT);
	  }
	  nanosleep(&ts1s, NULL);

	  kill(tracer, SIGKILL);
	  kill(tracee, SIGKILL);
	  return 0;
  }

This is identical to the program to test TRAP_NOTIFY except that
tracee is PTRACE_LISTEN'd instead of PTRACE_CONT'd when group stopped.
This allows ptracer to monitor when group stop ends without running
tracee.

  # ./test-listen
  tracer: stopped=0 signo=5
  mother: SIGSTOP
  tracer: SIG 19
  tracer: stopped=1 signo=19
  mother: SIGCONT
  tracer: stopped=0 signo=5
  tracer: SIG 18
  mother: SIGSTOP
  tracer: SIG 19
  tracer: stopped=1 signo=19
  mother: SIGCONT
  tracer: stopped=0 signo=5
  tracer: SIG 18
  mother: SIGSTOP
  tracer: SIG 19
  tracer: stopped=1 signo=19
  mother: SIGCONT
  tracer: stopped=0 signo=5
  tracer: SIG 18

-v2: Moved JOBCTL_LISTENING check in wait_task_stopped() into
     task_stopped_code() as suggested by Oleg.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>

Currently there's no way for ptracer to find out whether group stop
finished other than polling with INTERRUPT - GETSIGINFO - CONT
sequence.  This patch implements group stop notification for ptracer
using STOP traps.

When group stop state of a seized tracee changes, JOBCTL_TRAP_NOTIFY
is set, which schedules a STOP trap which is sticky - it isn't cleared
by other traps and at least one STOP trap will happen eventually.
STOP trap is synchronization point for event notification and the
tracer can determine the current group stop state by looking at the
signal number portion of exit code (si_status from waitid(2) or
si_code from PTRACE_GETSIGINFO).

Notifications are generated both on start and end of group stops but,
because group stop participation always happens before STOP trap, this
doesn't cause an extra trap while tracee is participating in group
stop.  The symmetry will be useful later.

Note that this notification works iff tracee is not trapped.
Currently there is no way to be notified of group stop state changes
while tracee is trapped.  This will be addressed by a later patch.

An example program follows.

  #define PTRACE_SEIZE		0x4206
  #define PTRACE_INTERRUPT	0x4207

  #define PTRACE_SEIZE_DEVEL	0x80000000

  static const struct timespec ts1s = { .tv_sec = 1 };

  int main(int argc, char **argv)
  {
	  pid_t tracee, tracer;
	  int i;

	  tracee = fork();
	  if (!tracee)
		  while (1)
			  pause();

	  tracer = fork();
	  if (!tracer) {
		  siginfo_t si;

		  ptrace(PTRACE_SEIZE, tracee, NULL,
			 (void *)(unsigned long)PTRACE_SEIZE_DEVEL);
		  ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL);
	  repeat:
		  waitid(P_PID, tracee, NULL, WSTOPPED);

		  ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si);
		  if (!si.si_code) {
			  printf("tracer: SIG %d\n", si.si_signo);
			  ptrace(PTRACE_CONT, tracee, NULL,
				 (void *)(unsigned long)si.si_signo);
			  goto repeat;
		  }
		  printf("tracer: stopped=%d signo=%d\n",
			 si.si_signo != SIGTRAP, si.si_signo);
		  ptrace(PTRACE_CONT, tracee, NULL, NULL);
		  goto repeat;
	  }

	  for (i = 0; i < 3; i++) {
		  nanosleep(&ts1s, NULL);
		  printf("mother: SIGSTOP\n");
		  kill(tracee, SIGSTOP);
		  nanosleep(&ts1s, NULL);
		  printf("mother: SIGCONT\n");
		  kill(tracee, SIGCONT);
	  }
	  nanosleep(&ts1s, NULL);

	  kill(tracer, SIGKILL);
	  kill(tracee, SIGKILL);
	  return 0;
  }

In the above program, tracer keeps tracee running and gets
notification of each group stop state changes.

  # ./test-notify
  tracer: stopped=0 signo=5
  mother: SIGSTOP
  tracer: SIG 19
  tracer: stopped=1 signo=19
  mother: SIGCONT
  tracer: stopped=0 signo=5
  tracer: SIG 18
  mother: SIGSTOP
  tracer: SIG 19
  tracer: stopped=1 signo=19
  mother: SIGCONT
  tracer: stopped=0 signo=5
  tracer: SIG 18
  mother: SIGSTOP
  tracer: SIG 19
  tracer: stopped=1 signo=19
  mother: SIGCONT
  tracer: stopped=0 signo=5
  tracer: SIG 18
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>

Currently, there's no way to trap a running ptracee short of sending a
signal which has various side effects.  This patch implements
PTRACE_INTERRUPT which traps ptracee without any signal or job control
related side effect.

The implementation is almost trivial.  It uses the group stop trap -
SIGTRAP | PTRACE_EVENT_STOP << 8.  A new trap flag
JOBCTL_TRAP_INTERRUPT is added, which is set on PTRACE_INTERRUPT and
cleared when any trap happens.  As INTERRUPT should be useable
regardless of the current state of tracee, task_is_traced() test in
ptrace_check_attach() is skipped for INTERRUPT.

PTRACE_INTERRUPT is available iff tracee is attached with
PTRACE_SEIZE.

Test program follows.

  #define PTRACE_SEIZE		0x4206
  #define PTRACE_INTERRUPT	0x4207

  #define PTRACE_SEIZE_DEVEL	0x80000000

  static const struct timespec ts100ms = { .tv_nsec = 100000000 };
  static const struct timespec ts1s = { .tv_sec = 1 };
  static const struct timespec ts3s = { .tv_sec = 3 };

  int main(int argc, char **argv)
  {
	  pid_t tracee;

	  tracee = fork();
	  if (tracee == 0) {
		  nanosleep(&ts100ms, NULL);
		  while (1) {
			  printf("tracee: alive pid=%d\n", getpid());
			  nanosleep(&ts1s, NULL);
		  }
	  }

	  if (argc > 1)
		  kill(tracee, SIGSTOP);

	  nanosleep(&ts100ms, NULL);

	  ptrace(PTRACE_SEIZE, tracee, NULL,
		 (void *)(unsigned long)PTRACE_SEIZE_DEVEL);
	  if (argc > 1) {
		  waitid(P_PID, tracee, NULL, WSTOPPED);
		  ptrace(PTRACE_CONT, tracee, NULL, NULL);
	  }
	  nanosleep(&ts3s, NULL);

	  printf("tracer: INTERRUPT and DETACH\n");
	  ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL);
	  waitid(P_PID, tracee, NULL, WSTOPPED);
	  ptrace(PTRACE_DETACH, tracee, NULL, NULL);
	  nanosleep(&ts3s, NULL);

	  printf("tracer: exiting\n");
	  kill(tracee, SIGKILL);
	  return 0;
  }

When called without argument, tracee is seized from running state,
interrupted and then detached back to running state.

  # ./test-interrupt
  tracee: alive pid=4546
  tracee: alive pid=4546
  tracee: alive pid=4546
  tracer: INTERRUPT and DETACH
  tracee: alive pid=4546
  tracee: alive pid=4546
  tracee: alive pid=4546
  tracer: exiting

When called with argument, tracee is seized from stopped state,
continued, interrupted and then detached back to stopped state.

  # ./test-interrupt  1
  tracee: alive pid=4548
  tracee: alive pid=4548
  tracee: alive pid=4548
  tracer: INTERRUPT and DETACH
  tracer: exiting

Before PTRACE_INTERRUPT, once the tracee was running, there was no way
to trap tracee and do PTRACE_DETACH without causing side effect.

-v2: Updated to use task_set_jobctl_pending() so that it doesn't end
     up scheduling TRAP_STOP if child is dying which may make the
     child unkillable.  Spotted by Oleg.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>

PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side
effects on tracee signal and job control states.  This patch
implements a new ptrace request PTRACE_SEIZE which attaches a tracee
without trapping it or affecting its signal and job control states.

The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_*
flags in @data.  Currently, the only defined flag is
PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE.
PTRACE_SEIZE will change ptrace behaviors outside of attach itself.
The changes will be implemented gradually and the DEVEL flag is to
prevent programs which expect full SEIZE behavior from using it before
all the behavior modifications are complete while allowing unit
testing.  The flag will be removed once SEIZE behaviors are completely
implemented.

* PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap.  After
  attaching tracee continues to run unless a trap condition occurs.

* PTRACE_SEIZE doesn't affect signal or group stop state.

* If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses
  exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of
  the stopping signals if group stop is in effect or SIGTRAP
  otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO
  instead of NULL.

Seizing sets PT_SEIZED in ->ptrace of the tracee.  This flag will be
used to determine whether new SEIZE behaviors should be enabled.

Test program follows.

  #define PTRACE_SEIZE		0x4206
  #define PTRACE_SEIZE_DEVEL	0x80000000

  static const struct timespec ts100ms = { .tv_nsec = 100000000 };
  static const struct timespec ts1s = { .tv_sec = 1 };
  static const struct timespec ts3s = { .tv_sec = 3 };

  int main(int argc, char **argv)
  {
	  pid_t tracee;

	  tracee = fork();
	  if (tracee == 0) {
		  nanosleep(&ts100ms, NULL);
		  while (1) {
			  printf("tracee: alive\n");
			  nanosleep(&ts1s, NULL);
		  }
	  }

	  if (argc > 1)
		  kill(tracee, SIGSTOP);

	  nanosleep(&ts100ms, NULL);

	  ptrace(PTRACE_SEIZE, tracee, NULL,
		 (void *)(unsigned long)PTRACE_SEIZE_DEVEL);
	  if (argc > 1) {
		  waitid(P_PID, tracee, NULL, WSTOPPED);
		  ptrace(PTRACE_CONT, tracee, NULL, NULL);
	  }
	  nanosleep(&ts3s, NULL);
	  printf("tracer: exiting\n");
	  return 0;
  }

When the above program is called w/o argument, tracee is seized while
running and remains running.  When tracer exits, tracee continues to
run and print out messages.

  # ./test-seize-simple
  tracee: alive
  tracee: alive
  tracee: alive
  tracer: exiting
  tracee: alive
  tracee: alive

When called with an argument, tracee is seized from stopped state and
continued, and returns to stopped state when tracer exits.

  # ./test-seize
  tracee: alive
  tracee: alive
  tracee: alive
  tracer: exiting
  # ps -el|grep test-seize
  1 T     0  4720     1  0  80   0 -   941 signal ttyS0    00:00:00 test-seize

-v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan
     suggested.

-v3: PTRACE_EVENT_STOP traps now report group stop state by signr.  If
     group stop is in effect the stop signal number is returned as
     part of exit_code; otherwise, SIGTRAP.  This was suggested by
     Denys and Oleg.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Oleg Nesterov <oleg@redhat.com>

do_signal_stop() implemented both normal group stop and trap for group
stop while ptraced.  This approach has been enough but scheduled
changes require trap mechanism which can be used in more generic
manner and using group stop trap for generic trap site simplifies both
userland visible interface and implementation.

This patch adds a new jobctl flag - JOBCTL_TRAP_STOP.  When set, it
triggers a trap site, which behaves like group stop trap, in
get_signal_to_deliver() after checking for pending signals.  While
ptraced, do_signal_stop() doesn't stop itself.  It initiates group
stop if requested and schedules JOBCTL_TRAP_STOP and returns.  The
caller - get_signal_to_deliver() - is responsible for checking whether
TRAP_STOP is pending afterwards and handling it.

ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of
JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap
bits and TRAPPING so that TRAP_STOP and future trap bits don't linger
after detach.

While at it, add proper function comment to do_signal_stop() and make
it return bool.

-v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING
     instead of JOBCTL_PENDING_MASK.  This avoids accidentally
     clearing JOBCTL_STOP_CONSUME.  Spotted by Oleg.

-v3: do_signal_stop() updated to return %false without dropping
     siglock while ptraced and TRAP_STOP check moved inside for(;;)
     loop after group stop participation.  This avoids unnecessary
     relocking and also will help avoiding unnecessary traps by
     consuming group stop before handling pending traps.

-v4: Jobctl trap handling moved into a separate function -
     do_jobctl_trap().
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>

Remove the following three noop tracehooks in signals.c.

* tracehook_force_sigpending()
* tracehook_get_signal()
* tracehook_finish_jctl()

The code area is about to be updated and these hooks don't do anything
other than obfuscating the logic.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

ptracer->signal->wait_chldexit was used to wait for TRAPPING; however,
->wait_chldexit was already complicated with waker-side filtering
without adding TRAPPING wait on top of it.  Also, it unnecessarily
made TRAPPING clearing depend on the current ptrace relationship - if
the ptracee is detached, wakeup is lost.

There is no reason to use signal->wait_chldexit here.  We're just
waiting for JOBCTL_TRAPPING bit to clear and given the relatively
infrequent use of ptrace, bit_waitqueue can serve it perfectly.

This patch makes JOBCTL_TRAPPING wait use bit_waitqueue instead of
signal->wait_chldexit.

-v2: Use JOBCTL_*_BIT macros instead of ilog2() as suggested by Linus.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

task->jobctl currently hosts JOBCTL_STOP_PENDING and will host TRAP
pending bits too.  Setting pending conditions on a dying task may make
the task unkillable.  Currently, each setting site is responsible for
checking for the condition but with to-be-added job control traps this
becomes too fragile.

This patch adds task_set_jobctl_pending() which should be used when
setting task->jobctl bits to schedule a stop or trap.  The function
performs the followings to ease setting pending bits.

* Sanity checks.

* If fatal signal is pending or PF_EXITING is set, no bit is set.

* STOP_SIGMASK is automatically cleared if new value is being set.

do_signal_stop() and ptrace_attach() are updated to use
task_set_jobctl_pending() instead of setting STOP_PENDING explicitly.
The surrounding structures around setting are changed to fit
task_set_jobctl_pending() better but there should be no userland
visible behavior difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

JOBCTL_TRAPPING indicates that ptracer is waiting for tracee to
(re)transit into TRACED.  task_clear_jobctl_pending() must be called
when either tracee enters TRACED or the transition is cancelled for
some reason.  The former is achieved by explicitly calling
task_clear_jobctl_pending() in ptrace_stop() and the latter by calling
it at the end of do_signal_stop().

Calling task_clear_jobctl_trapping() at the end of do_signal_stop()
limits the scope TRAPPING can be used and is fragile in that seemingly
unrelated changes to tracee's control flow can lead to stuck TRAPPING.

We already have task_clear_jobctl_pending() calls on those cancelling
events to clear JOBCTL_STOP_PENDING.  Cancellations can be handled by
making those call sites use JOBCTL_PENDING_MASK instead and updating
task_clear_jobctl_pending() such that task_clear_jobctl_trapping() is
called automatically if no stop/trap is pending.

This patch makes the above changes and removes the fallback
task_clear_jobctl_trapping() call from do_signal_stop().
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

This patch introduces JOBCTL_PENDING_MASK and replaces
task_clear_jobctl_stop_pending() with task_clear_jobctl_pending()
which takes an extra @mask argument.

JOBCTL_PENDING_MASK is currently equal to JOBCTL_STOP_PENDING but
future patches will add more bits.  recalc_sigpending_tsk() is updated
to use JOBCTL_PENDING_MASK instead.

task_clear_jobctl_pending() takes @mask which in subset of
JOBCTL_PENDING_MASK and clears the relevant jobctl bits.  If
JOBCTL_STOP_PENDING is set, other STOP bits are cleared together.  All
task_clear_jobctl_stop_pending() users are updated to call
task_clear_jobctl_pending() with JOBCTL_STOP_PENDING which is
functionally identical to task_clear_jobctl_stop_pending().

This patch doesn't cause any functional change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

In ptrace_stop(), after arch hook is done, the task state and jobctl
bits are updated while holding siglock.  The ordering requirement
there is that TASK_TRACED is set before JOBCTL_TRAPPING is cleared to
prevent ptracer waiting on TRAPPING doesn't end up waking up TRACED is
actually set and sees TASK_RUNNING in wait(2).

Move set_current_state(TASK_TRACED) to the top of the block and
reorganize comments.  This makes the ordering more obvious
(TASK_TRACED before other updates) and helps future updates to group
stop participation.

This patch doesn't cause any functional change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

PTRACE_INTERRUPT is going to be added which should also skip
task_is_traced() check in ptrace_check_attach().  Rename @kill to
@ignore_state and make it bool.  Add function comment while at it.

This patch doesn't introduce any behavior difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

signal->group_stop currently hosts mostly group stop related flags;
however, it's gonna be used for wider purposes and the GROUP_STOP_
flag prefix becomes confusing.  Rename signal->group_stop to
signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*.

Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are
defined in terms of them to allow using bitops later.

While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate
future additions.

This doesn't cause any functional change.

-v2: JOBCTL_*_BIT macros added as suggested by Linus.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

Remove local variable wait_trap which determines whether to wait for
!TRAPPING or not and simply wait for it if attach was successful.

-v2: Oleg pointed out wait should happen iff attach was successful.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] Fix oops caused by queue refcounting failure

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits)
  tg3: Fix tg3_skb_error_unmap()
  net: tracepoint of net_dev_xmit sees freed skb and causes panic
  drivers/net/can/flexcan.c: add missing clk_put
  net: dm9000: Get the chip in a known good state before enabling interrupts
  drivers/net/davinci_emac.c: add missing clk_put
  af-packet: Add flag to distinguish VID 0 from no-vlan.
  caif: Fix race when conditionally taking rtnl lock
  usbnet/cdc_ncm: add missing .reset_resume hook
  vlan: fix typo in vlan_dev_hard_start_xmit()
  net/ipv4: Check for mistakenly passed in non-IPv4 address
  iwl4965: correctly validate temperature value
  bluetooth l2cap: fix locking in l2cap_global_chan_by_psm
  ath9k: fix two more bugs in tx power
  cfg80211: don't drop p2p probe responses
  Revert "net: fix section mismatches"
  drivers/net/usb/catc.c: Fix potential deadlock in catc_ctrl_run()
  sctp: stop pending timers and purge queues when peer restart asoc
  drivers/net: ks8842 Fix crash on received packet when in PIO mode.
  ip_options_compile: properly handle unaligned pointer
  iwlagn: fix incorrect PCI subsystem id for 6150 devices
  ...

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: Use hlist_entry() for io_context.cic_list.first
  cfq-iosched: Remove bogus check in queue_fail path
  xen/blkback: potential null dereference in error handling
  xen/blkback: don't call vbd_size() if bd_disk is NULL
  block: blkdev_get() should access ->bd_disk only after success
  CFQ: Fix typo and remove unnecessary semicolon
  block: remove unwanted semicolons
  Revert "block: Remove extra discard_alignment from hd_struct."
  nbd: adjust 'max_part' according to part_shift
  nbd: limit module parameters to a sane value
  nbd: pass MSG_* flags to kernel_recvmsg()
  block: improve the bio_add_page() and bio_add_pc_page() descriptions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: strncpy: fix handling of zero lengths