- 29 6月, 2013 9 次提交
-
-
由 Jeff Layton 提交于
This looks like pointless refactoring for now, but we'll flesh out the need_mount case a little more in a later patch. Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
Not need to create pipes for dying client. So just skip them. Note: we can safely dereference the client structure, because notification caller is holding sn->pipefs_sb_lock. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Cc: stable@vger.kernel.org Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
This helper moves all "registration" code to the new rpc_client_register() helper. This helper will be used later in the series to synchronize against PipeFS MOUNT/UMOUNT events. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
CPU#0 CPU#1 ----------------------------- ----------------------------- rpc_kill_sb sn->pipefs_sb = NULL rpc_release_client (UMOUNT_EVENT) rpc_free_auth rpc_pipefs_event rpc_get_client_for_event !atomic_inc_not_zero(cl_count) <skip the client> atomic_inc(cl_count) rpc_free_client rpc_clnt_remove_pipedir <skip client dir removing> To fix this, this patch does the following: 1) Calls RPC_PIPEFS_UMOUNT notification with sn->pipefs_sb_lock being held. 2) Removes SUNRPC client from the list AFTER pipes destroying. 3) Doesn't hold RPC client on notification: if client in the list, then it can't be destroyed while sn->pipefs_sb_lock in hold by notification caller. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Cc: stable@vger.kernel.org Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
Below are races, when RPC client can be created without PiepFS dentries CPU#0 CPU#1 ----------------------------- ----------------------------- rpc_new_client rpc_fill_super rpc_setup_pipedir mutex_lock(&sn->pipefs_sb_lock) rpc_get_sb_net == NULL (no per-net PipeFS superblock) sn->pipefs_sb = sb; notifier_call_chain(MOUNT) (client is not in the list) rpc_register_client (client without pipes dentries) To fix this patch: 1) makes PipeFS mount notification call with pipefs_sb_lock being held. 2) releases pipefs_sb_lock on new SUNRPC client creation only after registration. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Cc: stable@vger.kernel.org Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
The GETDEVICEINFO gdia_maxcount represents all of the data being returned within the GETDEVICEINFO4resok structure and includes the XDR overhead. The CREATE_SESSION ca_maxresponsesize is the maximum reply and includes the RPC headers (including security flavor credentials and verifiers). Split out the struct pnfs_device field maxcount which is the gdia_maxcount from the pglen field which is the reply (the total) buffer length. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
Fallback should happen only when the request_key() call fails, because this indicates that there was a problem running the nfsidmap program. We shouldn't call the legacy code if the error was elsewhere. Signed-off-by: NBryan Schumaker <bjschuma@netappp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 6月, 2013 1 次提交
-
-
由 Andy Adamson 提交于
We need to ensure that we clear NFS4_SLOT_TBL_DRAINING on the back channel when we're done recovering the session. Regression introduced by commit 774d5f14 (NFSv4.1 Fix a pNFS session draining deadlock) Signed-off-by: NAndy Adamson <andros@netapp.com> [Trond: Changed order to start back-channel first. Minor code cleanup] Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org [>=3.10]
-
- 19 6月, 2013 5 次提交
-
-
由 Trond Myklebust 提交于
Give them names that are a bit more consistent with the general pNFS naming scheme. - lo_seg_contained -> pnfs_lseg_range_contained - lo_seg_intersecting -> pnfs_lseg_range_intersecting - cmp_layout -> pnfs_lseg_range_cmp - is_matching_lseg -> pnfs_lseg_range_match Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Also strip off the unnecessary 'inline' declarations. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The other protocols don't use it, so make it local to NFSv4, and remove the EXPORT. Also ensure that we only compile in cache_lib.o if we're using the legacy DNS resolver. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Bryan Schumaker <bjschuma@netapp.com>
-
由 Jeff Layton 提交于
We had a report of a reproducible WARNING: [ 1360.039358] ------------[ cut here ]------------ [ 1360.043978] WARNING: at fs/dcache.c:1355 d_set_d_op+0x8d/0xc0() [ 1360.049880] Hardware name: HP Z200 Workstation [ 1360.054308] Modules linked in: nfsv4 nfs dns_resolver fscache nfsd auth_rpcgss nfs_acl lockd sunrpc sg acpi_cpufreq mperf coretemp kvm_intel kvm snd_hda_codec_realtek snd_hda_intel snd_hda_codec hp_wmi crc32c_intel snd_hwdep e1000e snd_seq snd_seq_device snd_pcm snd_page_alloc snd_timer snd sparse_keymap rfkill soundcore serio_raw ptp iTCO_wdt pps_core pcspkr iTCO_vendor_support mei microcode lpc_ich mfd_core wmi xfs libcrc32c sr_mod sd_mod cdrom crc_t10dif radeon i2c_algo_bit drm_kms_helper ttm ahci libahci drm i2c_core libata dm_mirror dm_region_hash dm_log dm_mod [last unloaded: auth_rpcgss] [ 1360.107406] Pid: 8814, comm: mount.nfs4 Tainted: G I -------------- 3.9.0-0.55.el7.x86_64 #1 [ 1360.116771] Call Trace: [ 1360.119219] [<ffffffff810610c0>] warn_slowpath_common+0x70/0xa0 [ 1360.125208] [<ffffffff810611aa>] warn_slowpath_null+0x1a/0x20 [ 1360.131025] [<ffffffff811af46d>] d_set_d_op+0x8d/0xc0 [ 1360.136159] [<ffffffffa05a7d6f>] __rpc_lookup_create_exclusive+0x4f/0x80 [sunrpc] [ 1360.143710] [<ffffffffa05a8cc6>] rpc_mkpipe_dentry+0x86/0x170 [sunrpc] [ 1360.150311] [<ffffffffa062a7b6>] nfs_idmap_new+0x96/0x130 [nfsv4] [ 1360.156475] [<ffffffffa062e7cd>] nfs4_init_client+0xad/0x2d0 [nfsv4] [ 1360.162902] [<ffffffff812f02df>] ? idr_get_empty_slot+0x16f/0x3c0 [ 1360.169062] [<ffffffff812f0582>] ? idr_mark_full+0x52/0x60 [ 1360.174615] [<ffffffff812f0699>] ? idr_alloc+0x79/0xe0 [ 1360.179826] [<ffffffffa0598081>] ? __rpc_init_priority_wait_queue+0x81/0xc0 [sunrpc] [ 1360.187635] [<ffffffffa05980f3>] ? rpc_init_wait_queue+0x13/0x20 [sunrpc] [ 1360.194493] [<ffffffffa05d05da>] nfs_get_client+0x27a/0x350 [nfs] [ 1360.200666] [<ffffffffa062e438>] nfs4_set_client.isra.8+0x78/0x100 [nfsv4] [ 1360.207624] [<ffffffffa062f2f3>] nfs4_create_server+0xf3/0x3a0 [nfsv4] [ 1360.214222] [<ffffffffa06284be>] nfs4_remote_mount+0x2e/0x60 [nfsv4] [ 1360.220644] [<ffffffff8119ea79>] mount_fs+0x39/0x1b0 [ 1360.225691] [<ffffffff81153880>] ? __alloc_percpu+0x10/0x20 [ 1360.231348] [<ffffffff811b7ccf>] vfs_kern_mount+0x5f/0xf0 [ 1360.236822] [<ffffffffa0628396>] nfs_do_root_mount+0x86/0xc0 [nfsv4] [ 1360.243246] [<ffffffffa06287b4>] nfs4_try_mount+0x44/0xc0 [nfsv4] [ 1360.249410] [<ffffffffa05d1457>] ? get_nfs_version+0x27/0x80 [nfs] [ 1360.255659] [<ffffffffa05db985>] nfs_fs_mount+0x5c5/0xd10 [nfs] [ 1360.261650] [<ffffffffa05dc550>] ? nfs_clone_super+0x140/0x140 [nfs] [ 1360.268074] [<ffffffffa05da8e0>] ? param_set_portnr+0x60/0x60 [nfs] [ 1360.274406] [<ffffffff8119ea79>] mount_fs+0x39/0x1b0 [ 1360.279443] [<ffffffff81153880>] ? __alloc_percpu+0x10/0x20 [ 1360.285088] [<ffffffff811b7ccf>] vfs_kern_mount+0x5f/0xf0 [ 1360.290556] [<ffffffff811b9f5d>] do_mount+0x1fd/0xa00 [ 1360.295677] [<ffffffff81137dee>] ? __get_free_pages+0xe/0x50 [ 1360.301405] [<ffffffff811b9be6>] ? copy_mount_options+0x36/0x170 [ 1360.307479] [<ffffffff811ba7e3>] sys_mount+0x83/0xc0 [ 1360.312515] [<ffffffff8160ad59>] system_call_fastpath+0x16/0x1b [ 1360.318503] ---[ end trace 8fa1f4cbc36094a7 ]--- The problem is that we're ending up in __rpc_lookup_create_exclusive with a negative dentry that already has d_op set. A little debugging has shown that when we hit this, the d_ops are already set to simple_dentry_operations. I believe that what's happening is that during a mount, idmapd is racing in and doing a lookup of /var/lib/nfs/rpc_pipefs/nfs/clnt???/idmap. Before that dentry reference is released, the kernel races in to create that file and finds the new negative dentry, which already has the d_op set. This patch just avoids setting the d_op if it's already set. simple_dentry_operations and rpc_dentry_operations are functionally equivalent so it shouldn't matter which one it's set to. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Djalal Harouni 提交于
Make sure that NFSv4 SETCLIENTID does not parse the NETID as a format string. Signed-off-by: NDjalal Harouni <tixxdz@opendz.org> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 07 6月, 2013 17 次提交
-
-
由 Trond Myklebust 提交于
State recovery currently relies on being able to find a valid nfs_open_context in the inode->open_files list. We therefore need to put the nfs_open_context on the list while we're still protected by the sp->so_reclaim_seqcount in order to avoid reboot races. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Instead of having the callers set ctx->state, do it inside _nfs4_open_and_get_state. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
All the callers have an open_context at this point, and since we always need one in order to do state recovery, it makes sense to use it as the basis for the nfs4_do_open() call. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We already check the EXEC access mode in the lower layers. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The RPC_TASK_RUNNING flag will always have been set in rpc_make_runnable() once we get past the test for out_of_line_wait_on_bit() returning ERESTARTSYS. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If the rpc_task is asynchronous, it could theoretically finish executing on the workqueue it was assigned by rpc_make_runnable() before we get round to testing RPC_IS_ASYNC() in rpc_execute. In practice, however, all the existing callers hold a reference to the rpc_task, so this can't happen today... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
ctx->cred == ctx->state->owner->so_cred, so let's just use the former. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Use the EXCHGID4_FLAG_BIND_PRINC_STATEID exchange_id flag to enable stateid protection. This means that if we create a stateid using a particular principal, then we must use the same principal if we want to change that state. IOW: if we OPEN a file using a particular credential, then we have to use the same credential in subsequent OPEN_DOWNGRADE, CLOSE, or DELEGRETURN operations that use that stateid. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
This is not strictly needed, since get_deviceinfo is not allowed to return NFS4ERR_ACCESS or NFS4ERR_WRONG_CRED, but lets do it anyway for consistency with other pNFS operations. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We want to use the same credential for reclaim_complete as we used for the exchange_id call. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We need to use the same credential as was used for the layoutget and/or layoutcommit operations. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Ensure that we use the same credential for layoutget, layoutcommit and layoutreturn. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 31 5月, 2013 1 次提交
-
-
由 Chuck Lever 提交于
Darrick J. Wong <darrick.wong@oracle.com> reports: > I have a kvm-based testing setup that netboots VMs over NFS, the > client end of which seems to have broken somehow in 3.10-rc1. The > server's exports file looks like this: > > /storage/mtr/x64 192.168.122.0/24(ro,sync,no_root_squash,no_subtree_check) > > On the client end (inside the VM), the initrd runs the following > command to try to mount the rootfs over NFS: > > # mount -o nolock -o ro -o retrans=10 192.168.122.1:/storage/mtr/x64/ /root > > (Note: This is the busybox mount command.) > > The mount fails with -EINVAL. Commit 4580a92d "NFS: Use server-recommended security flavor by default (NFSv3)" introduced a behavior regression for NFS mounts done via a legacy binary mount(2) call. Ensure that a default security flavor is specified for legacy binary mount requests, since they do not invoke nfs_select_flavor() in the kernel. Busybox uses klibc's nfsmount command, which performs NFS mounts using the legacy binary mount data format. /sbin/mount.nfs is not affected by this regression. Reported-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NDarrick J. Wong <darrick.wong@oracle.com> Acked-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 30 5月, 2013 1 次提交
-
-
由 Trond Myklebust 提交于
We need to pass the full open mode flags to nfs_may_open() when doing a delegated open. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
-
- 24 5月, 2013 1 次提交
-
-
由 Chuck Lever 提交于
Commit 79d852bf "NFS: Retry SETCLIENTID with AUTH_SYS instead of AUTH_NONE" did not take into account commit 23631227 "NFSv4: Fix the fallback to AUTH_NULL if krb5i is not available". Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 23 5月, 2013 1 次提交
-
-
由 Trond Myklebust 提交于
The lockless RPC_IS_QUEUED() test in __rpc_execute means that we need to be careful about ordering the calls to rpc_test_and_set_running(task) and rpc_clear_queued(task). If we get the order wrong, then we may end up testing the RPC_TASK_RUNNING flag after __rpc_execute() has looped and changed the state of the rpc_task. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
-
- 21 5月, 2013 1 次提交
-
-
由 Andy Adamson 提交于
On a CB_RECALL the callback service thread flushes the inode using filemap_flush prior to scheduling the state manager thread to return the delegation. When pNFS is used and I/O has not yet gone to the data server servicing the inode, a LAYOUTGET can preceed the I/O. Unlike the async filemap_flush call, the LAYOUTGET must proceed to completion. If the state manager starts to recover data while the inode flush is sending the LAYOUTGET, a deadlock occurs as the callback service thread holds the single callback session slot until the flushing is done which blocks the state manager thread, and the state manager thread has set the session draining bit which puts the inode flush LAYOUTGET RPC to sleep on the forechannel slot table waitq. Separate the draining of the back channel from the draining of the fore channel by moving the NFS4_SESSION_DRAINING bit from session scope into the fore and back slot tables. Drain the back channel first allowing the LAYOUTGET call to proceed (and fail) so the callback service thread frees the callback slot. Then proceed with draining the forechannel. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 16 5月, 2013 3 次提交
-
-
由 Trond Myklebust 提交于
This seems to have been overlooked when we did the namespace conversion. If a container is running a legacy version of rpc.gssd then it will be disrupted if the global 'pipe_version' is set by a container running the new version of rpc.gssd. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Recent changes to the NFS security flavour negotiation mean that we have a stronger dependency on rpc.gssd. If the latter is not running, because the user failed to start it, then we time out and mark the container as not having an instance. We then use that information to time out faster the next time. If, on the other hand, the rpc.gssd successfully binds to an rpc_pipe, then we mark the container as having an rpc.gssd instance. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If wait_event_interruptible_timeout() is successful, it returns the number of seconds remaining until the timeout. In that case, we should be retrying the upcall. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-