- 25 1月, 2017 4 次提交
-
-
由 Michael S. Tsirkin 提交于
I don't have any guests with PAGE_SIZE > 64k but the code seems to be clearly broken in that case as PAGE_SIZE / MERGEABLE_BUFFER_ALIGN will need more than 8 bit and so the code in mergeable_ctx_to_buf_address does not give us the actual true size. Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
mlxsw_sp_nexthop_group_mac_update() is called in one of two cases: 1) When the MAC of a nexthop needs to be updated 2) When the size of a nexthop group has changed In the second case the adjacency entries for the nexthop group need to be reallocated from the adjacency table. In this case we must write to the entries the MAC addresses of all the nexthops that should be offloaded and not only those whose MAC changed. Otherwise, these entries would be filled with garbage data, resulting in packet loss. Fixes: a7ff87ac ("mlxsw: spectrum_router: Implement next-hop routing") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Runtime suspend shouldn't be executed if the tx queue is not empty, because the device is not idle. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingju Hou 提交于
Signed-off-by: NJingju Hou <houjingj@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 1月, 2017 1 次提交
-
-
由 Florian Fainelli 提交于
phy_error() is called in the PHY state machine workqueue context, and calls phy_trigger_machine() which does a cancel_delayed_work_sync() of the workqueue we execute from, causing a deadlock situation. Augment phy_trigger_machine() machine with a sync boolean indicating whether we should use cancel_*_sync() or just cancel_*_work(). Fixes: 3c293f4e ("net: phy: Trigger state machine on state change and not polling.") Reported-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 1月, 2017 2 次提交
-
-
由 Lendacky, Thomas 提交于
The xgbe_init() routine returns a return code indicating success or failure, but the return code is not checked. Add code to xgbe_init() to issue a message when failures are seen and add code to check the xgbe_init() return code. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
A newer version of the hardware is using the same PCI ids for the network device but has altered register definitions for determining the window settings for the indirect PCS access. Add support to check for this hardware and if found use the new register values. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 1月, 2017 6 次提交
-
-
由 Vineeth Remanan Pillai 提交于
During an OOM scenario, request slots could not be created as skb allocation fails. So the netback cannot pass in packets and netfront wrongly assumes that there is no more work to be done and it disables polling. This causes Rx to stall. The issue is with the retry logic which schedules the timer if the created slots are less than NET_RX_SLOTS_MIN. The count of new request slots to be pushed are calculated as a difference between new req_prod and rsp_cons which could be more than the actual slots, if there are unconsumed responses. The fix is to calculate the count of newly created slots as the difference between new req_prod and old req_prod. Signed-off-by: NVineeth Remanan Pillai <vineethp@amazon.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
A driver using dev_alloc_page() must not reuse a page allocated from emergency memory reserve. Otherwise all packets using this page will be immediately dropped, unless for very specific sockets having SOCK_MEMALLOC bit set. This issue might be hard to debug, because only a fraction of received packets would be dropped. Fixes: 4415a031 ("net/mlx5e: Implement RX mapped page cache for page recycle") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Acked-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
gcc-7 and probably earlier versions get confused by this function and print a harmless warning: drivers/net/ethernet/broadcom/bcm63xx_enet.c: In function 'bcm_enet_open': drivers/net/ethernet/broadcom/bcm63xx_enet.c:1130:3: error: 'phydev' may be used uninitialized in this function [-Werror=maybe-uninitialized] This adds an initialization for the 'phydev' variable when it is unused and changes the check to test for that NULL pointer to make it clear that we always pass a valid pointer here. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
struct qed_ll2_info is rather large, so putting it on the stack can cause an overflow, as this warning tries to tell us: drivers/net/ethernet/qlogic/qed/qed_ll2.c: In function 'qed_ll2_start': drivers/net/ethernet/qlogic/qed/qed_ll2.c:2159:1: error: the frame size of 1056 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] qed_ll2_start_ooo() already uses a dynamic allocation for the structure to work around that problem, and we could do the same in qed_ll2_start() as well as qed_roce_ll2_start(), but since the structure is only used to pass a couple of initialization values here, it seems nicer to replace it with a different structure. Lacking any idea for better naming, I'm adding 'struct qed_ll2_conn', which now contains all the initialization data, and this now simply gets copied into struct qed_ll2_info rather than assigning all members one by one. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
The rtl8152_post_reset() should sumbit rx urb and interrupt transfer, otherwise the rx wouldn't work and the linking change couldn't be detected. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jason Wang 提交于
Commit 501db511 ("virtio: don't set VIRTIO_NET_HDR_F_DATA_VALID on xmit") in fact disables VIRTIO_HDR_F_DATA_VALID on receiving path too, fixing this by adding a hint (has_data_valid) and set it only on the receiving path. Cc: Rolf Neugebauer <rolf.neugebauer@docker.com> Signed-off-by: NJason Wang <jasowang@redhat.com> Acked-by: NRolf Neugebauer <rolf.neugebauer@docker.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 1月, 2017 2 次提交
-
-
由 Eric Dumazet 提交于
A driver using dev_alloc_page() must not reuse a page that had to use emergency memory reserve. Otherwise all packets using this page will be immediately dropped, unless for very specific sockets having SOCK_MEMALLOC bit set. This issue might be hard to debug, because only a fraction of the RX ring buffer would suffer from drops. Fixes: 75354148 ("gianfar: Add paged allocation and Rx S/G") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Claudiu Manoil <claudiu.manoil@freescale.com> Acked-by: NClaudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
A cleanup removed the only user of this variable mlx5/core/en_ethtool.c: In function 'mlx5e_set_channels': mlx5/core/en_ethtool.c:546:6: error: unused variable 'ncv' [-Werror=unused-variable] Let's remove the declaration as well. Fixes: 639e9e94 ("net/mlx5e: Remove unnecessary checks when setting num channels") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 1月, 2017 6 次提交
-
-
由 Michael Chan 提交于
In the TPA GRO code path, initialize the tcp_opt_len variable to 0 so that it will be correct for packets without TCP timestamps. The bug caused the SKB fields to be incorrectly set up for packets without TCP timestamps, leading to these packets being rejected by the stack. Reported-by: NAndy Gospodarek <andrew.gospodarek@broadocm.com> Acked-by: NAndy Gospodarek <andrew.gospodarek@broadocm.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Commit a1cba561 ("net: phy: Add Broadcom phy library for common interfaces") make the BCM63xx PHY driver utilize bcm_phy_config_intr() which would appear to do the right thing, except that it does not write to the MII_BCM63XX_IR register but to MII_BCM54XX_ECR which is different. This would be causing invalid link parameters and events from being generated by the PHY interrupt. Fixes: a1cba561 ("net: phy: Add Broadcom phy library for common interfaces") Signed-off-by: NDaniel Gonzalez Cabanelas <dgcbueu@gmail.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Igor Druzhinin 提交于
vif->lock is used to protect statistics gathering agents from using the queue structure during cleaning. Signed-off-by: NIgor Druzhinin <igor.druzhinin@citrix.com> Acked-by: NWei Liu <wei.liu2@citrix.com> Reviewed-by: NPaul Durrant <paul.durrant@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Igor Druzhinin 提交于
Eliminate memory leaks introduced several years ago by cleaning the queue resources which are allocated on XenBus connection event. Namely, queue structure array and pages used for IO rings. Signed-off-by: NIgor Druzhinin <igor.druzhinin@citrix.com> Reviewed-by: NPaul Durrant <paul.durrant@citrix.com> Acked-by: NWei Liu <wei.liu2@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eran Ben Elisha 提交于
Boundaries checks for the number of RX and TX should be checked by the caller and not in the driver. Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com> Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eran Ben Elisha 提交于
Boundaries checks for the number of RX, TX, other and combined channels should be checked by the caller and not in the driver. In addition, remove wrong memset on get channels as it overrides the cmd field in the requester struct. Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com> Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 1月, 2017 5 次提交
-
-
由 Yegor Yefremov 提交于
In order to make the driver work with the common clock framework, this patch converts the clk_enable()/clk_disable() to clk_prepare_enable()/clk_disable_unprepare(). Also add error checking for clk_prepare_enable(). Signed-off-by: NYegor Yefremov <yegorslists@googlemail.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Einar Jón 提交于
The priv->device pointer for c_can_pci is never set, but it is used without a NULL check in c_can_start(). Setting it in c_can_pci_probe() like c_can_plat_probe() prevents c_can_pci.ko from crashing, with and without CONFIG_PM. This might also cause the pm_runtime_*() functions in c_can.c to actually be executed for c_can_pci devices - they are the only other place where priv->device is used, but they all contain a null check. Signed-off-by: NEinar Jón <tolvupostur@gmail.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Alvaro G. M 提交于
This PHY with fiber support is register compatible with DP83848, so add support for it. Signed-off-by: NAlvaro Gamez Machado <alvaro.gamez@hazent.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lance Richardson 提交于
vxlan->cfg.dst_port is in network byte order, so an htons() is needed here. Also reduced comment length to stay closer to 80 column width (still slightly over, however). Fixes: e1e5314d ("vxlan: implement GPE") Signed-off-by: NLance Richardson <lrichard@redhat.com> Acked-by: NJiri Benc <jbenc@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
The function stmmac_dt_phy provides several possibilities for initializing plat->mdio_node, all of which have the effect of increasing the reference count of the assigned value. This field is not updated elsewhere, so the value is live until the end of the lifetime of plat (devm_allocated), just after the end of stmmac_remove_config_dt. Thus, add an of_node_put on plat->mdio_node in stmmac_remove_config_dt. It is possible that the field mdio_node is never initialized, but of_node_put is NULL-safe, so it is also safe to call of_node_put in that case. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Acked-by: NAlexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 1月, 2017 12 次提交
-
-
由 Jack Morgenstein 提交于
When running SRIOV, warnings for SRQ LIMIT events flood the Hypervisor's message log when (correct, normally operating) apps use SRQ LIMIT events as a trigger to post WQEs to SRQs. Add more information to the existing debug printout for SRQ_LIMIT, and output the warning messages only for the SRQ CATAS ERROR event. Fixes: acba2420 ("mlx4_core: Add wrapper functions and comm channel and slave event support to EQs") Fixes: e0debf9c ("mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level") Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jack Morgenstein 提交于
Save the qp context flags byte containing the flag disabling vlan stripping in the RESET to INIT qp transition, rather than in the INIT to RTR transition. Per the firmware spec, the flags in this byte are active in the RESET to INIT transition. As a result of saving the flags in the incorrect qp transition, when switching dynamically from VGT to VST and back to VGT, the vlan remained stripped (as is required for VST) and did not return to not-stripped (as is required for VGT). Fixes: f0f829bf ("net/mlx4_core: Add immediate activate for VGT->VST->VGT") Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jack Morgenstein 提交于
In function mlx4_cq_completion() and mlx4_cq_event(), the radix_tree_lookup requires a rcu_read_lock. This is mandatory: if another core frees the CQ, it could run the radix_tree_node_rcu_free() call_rcu() callback while its being used by the radix tree lookup function. Additionally, in function mlx4_cq_event(), since we are adding the rcu lock around the radix-tree lookup, we no longer need to take the spinlock. Also, the synchronize_irq() call for the async event eliminates the need for incrementing the cq reference count in mlx4_cq_event(). Other changes: 1. In function mlx4_cq_free(), replace spin_lock_irq with spin_lock: we no longer take this spinlock in the interrupt context. The spinlock here, therefore, simply protects against different threads simultaneously invoking mlx4_cq_free() for different cq's. 2. In function mlx4_cq_free(), we move the radix tree delete to before the synchronize_irq() calls. This guarantees that we will not access this cq during any subsequent interrupts, and therefore can safely free the CQ after the synchronize_irq calls. The rcu_read_lock in the interrupt handlers only needs to protect against corrupting the radix tree; the interrupt handlers may access the cq outside the rcu_read_lock due to the synchronize_irq calls which protect against premature freeing of the cq. 3. In function mlx4_cq_event(), we change the mlx_warn message to mlx4_dbg. 4. We leave the cq reference count mechanism in place, because it is still needed for the cq completion tasklet mechanism. Fixes: 6d90aa5c ("net/mlx4_core: Make sure there are no pending async events when freeing CQ") Fixes: 225c7b1f ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiner Kallweit 提交于
Don't use netdev_info and friends before the net_device is registered. This avoids ugly messages like "meson8b-dwmac c9410000.ethernet (unnamed net_device) (uninitialized): Enable RX Mitigation via HW Watchdog Timer" Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
As found by Olof's build bot, we gain a harmless warning about a potential uninitialized variable reference in mlx5: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c: In function 'parse_tc_fdb_actions': drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:769:13: warning: 'out_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:811:21: note: 'out_dev' was declared here This was introduced through the addition of an 'IS_ERR/PTR_ERR' pair that gcc is unfortunately unable to completely figure out. The problem being gcc cannot tell that if(IS_ERR()) in mlx5e_route_lookup_ipv4() is equivalent to checking if(err) later, so it assumes that 'out_dev' is used after the 'return PTR_ERR(rt)'. The PTR_ERR_OR_ZERO() case by comparison is fairly easy to detect by gcc, so it can't get that wrong, so it no longer warns. Hadar Hen Zion already attempted to fix the warning earlier by adding fake initializations, but that ended up not fully addressing all warnings, so I'm reverting it now that it is no longer needed. Link: http://arm-soc.lixom.net/buildlogs/mainline/v4.10-rc3-98-gcff3b2c/ Fixes: a42485eb ("net/mlx5e: TC ipv4 tunnel encap offload error flow fixes") Fixes: a757d108 ("net/mlx5e: Fix kbuild warnings for uninitialized parameters") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karicheri, Muralidharan 提交于
Currently dp83867 driver returns error if phy interface type PHY_INTERFACE_MODE_RGMII_RXID is used to set the rx only internal delay. Similarly issue happens for PHY_INTERFACE_MODE_RGMII_TXID. Fix this by checking also the interface type if a particular delay value is missing in the phy dt bindings. Also update the DT document accordingly. Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Vecera 提交于
During interface opening MAC address stored in netdev->dev_addr is programmed in the HW with exception of BE3 VFs where the initial MAC is programmed by parent PF. This is OK when MAC address is not changed when an interfaces is down. In this case the requested MAC is stored to netdev->dev_addr and later is stored into HW during opening. But this is not done for all BE3 VFs so the NIC HW does not know anything about this change and all traffic is filtered. This is the case of bonding if fail_over_mac == 0 where the MACs of the slaves are changed while they are down. The be2net behavior is too restrictive because if a BE3 VF has the FILTMGMT privilege then it is able to modify its MAC without any restriction. To solve the described problem the driver should take care about these privileged BE3 VFs so the MAC is programmed during opening. And by contrast unpriviled BE3 VFs should not be allowed to change its MAC in any case. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: NIvan Vecera <cera@cera.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Vecera 提交于
BE3 VFs without FILTMGMT privilege are not allowed to modify its MAC, VLAN table and UC/MC lists. So don't try to delete MAC on such VFs. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: NIvan Vecera <cera@cera.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Vecera 提交于
Return value from be_mcc_notify_wait() contains a base completion status together with an additional status. The base_status() macro need to be used to access base status. Fixes: e3a7ae2c be2net: Changing MAC Address of a VF was broken Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: NIvan Vecera <cera@cera.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
The #warning was present 10 years ago when the driver first got merged. As the platform is rather obsolete by now, it seems very unlikely that the warning will cause anyone to fix the code properly. kernelci.org reports the warning for every build in the meantime, so I think it's better to just turn it into a code comment to reduce noise. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Masaru Nagai 提交于
Due to alignment requirements of the hardware transmissions are split into two DMA descriptors, a small padding descriptor of 0 - 3 bytes in length followed by a descriptor for rest of the packet. In the case of IP packets the first descriptor will never be zero due to the way that the stack aligns buffers for IP packets. However, for non-IP packets it may be zero. In that case it has been reported that timeouts occur, presumably because transmission stops at the first zero-length DMA descriptor and thus the packet is not transmitted. However, in my environment a BUG is triggered as follows: [ 20.381417] ------------[ cut here ]------------ [ 20.386054] kernel BUG at lib/swiotlb.c:495! [ 20.390324] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 20.395805] Modules linked in: [ 20.398862] CPU: 0 PID: 2089 Comm: mz Not tainted 4.10.0-rc3-00001-gf13ad2db193f #162 [ 20.406689] Hardware name: Renesas Salvator-X board based on r8a7796 (DT) [ 20.413474] task: ffff80063b1f1900 task.stack: ffff80063a71c000 [ 20.419404] PC is at swiotlb_tbl_map_single+0x178/0x2ec [ 20.424625] LR is at map_single+0x4c/0x98 [ 20.428629] pc : [<ffff00000839c4c0>] lr : [<ffff00000839c680>] pstate: 800001c5 [ 20.436019] sp : ffff80063a71f9b0 [ 20.439327] x29: ffff80063a71f9b0 x28: ffff80063a20d500 [ 20.444636] x27: ffff000008ed5000 x26: 0000000000000000 [ 20.449944] x25: 000000067abe2adc x24: 0000000000000000 [ 20.455252] x23: 0000000000200000 x22: 0000000000000001 [ 20.460559] x21: 0000000000175ffe x20: ffff80063b2a0010 [ 20.465866] x19: 0000000000000000 x18: 0000ffffcae6fb20 [ 20.471173] x17: 0000ffffa09ba018 x16: ffff0000087c8b70 [ 20.476480] x15: 0000ffffa084f588 x14: 0000ffffa09cfa14 [ 20.481787] x13: 0000ffffcae87ff0 x12: 000000000063abe2 [ 20.487098] x11: ffff000008096360 x10: ffff80063abe2adc [ 20.492407] x9 : 0000000000000000 x8 : 0000000000000000 [ 20.497718] x7 : 0000000000000000 x6 : ffff000008ed50d0 [ 20.503028] x5 : 0000000000000000 x4 : 0000000000000001 [ 20.508338] x3 : 0000000000000000 x2 : 000000067abe2adc [ 20.513648] x1 : 00000000bafff000 x0 : 0000000000000000 [ 20.518958] [ 20.520446] Process mz (pid: 2089, stack limit = 0xffff80063a71c000) [ 20.526798] Stack: (0xffff80063a71f9b0 to 0xffff80063a720000) [ 20.532543] f9a0: ffff80063a71fa30 ffff00000839c680 [ 20.540374] f9c0: ffff80063b2a0010 ffff80063b2a0010 0000000000000001 0000000000000000 [ 20.548204] f9e0: 000000000000006e ffff80063b23c000 ffff80063b23c000 0000000000000000 [ 20.556034] fa00: ffff80063b23c000 ffff80063a20d500 000000013b1f1900 0000000000000000 [ 20.563864] fa20: ffff80063ffd18e0 ffff80063b2a0010 ffff80063a71fa60 ffff00000839cd10 [ 20.571694] fa40: ffff80063b2a0010 0000000000000000 ffff80063ffd18e0 000000067abe2adc [ 20.579524] fa60: ffff80063a71fa90 ffff000008096380 ffff80063b2a0010 0000000000000000 [ 20.587353] fa80: 0000000000000000 0000000000000001 ffff80063a71fac0 ffff00000864f770 [ 20.595184] faa0: ffff80063b23caf0 0000000000000000 0000000000000000 0000000000000140 [ 20.603014] fac0: ffff80063a71fb60 ffff0000087e6498 ffff80063a20d500 ffff80063b23c000 [ 20.610843] fae0: 0000000000000000 ffff000008daeaf0 0000000000000000 ffff000008daeb00 [ 20.618673] fb00: ffff80063a71fc0c ffff000008da7000 ffff80063b23c090 ffff80063a44f000 [ 20.626503] fb20: 0000000000000000 ffff000008daeb00 ffff80063a71fc0c ffff000008da7000 [ 20.634333] fb40: ffff80063b23c090 0000000000000000 ffff800600000037 ffff0000087e63d8 [ 20.642163] fb60: ffff80063a71fbc0 ffff000008807510 ffff80063a692400 ffff80063a20d500 [ 20.649993] fb80: ffff80063a44f000 ffff80063b23c000 ffff80063a69249c 0000000000000000 [ 20.657823] fba0: 0000000000000000 ffff80063a087800 ffff80063b23c000 ffff80063a20d500 [ 20.665653] fbc0: ffff80063a71fc10 ffff0000087e67dc ffff80063a20d500 ffff80063a692400 [ 20.673483] fbe0: ffff80063b23c000 0000000000000000 ffff80063a44f000 ffff80063a69249c [ 20.681312] fc00: ffff80063a5f1a10 000000103a087800 ffff80063a71fc70 ffff0000087e6b24 [ 20.689142] fc20: ffff80063a5f1a80 ffff80063a71fde8 000000000000000f 00000000000005ea [ 20.696972] fc40: ffff80063a5f1a10 0000000000000000 000000000000000f ffff00000887fbd0 [ 20.704802] fc60: fffffff43a5f1a80 0000000000000000 ffff80063a71fc80 ffff000008880240 [ 20.712632] fc80: ffff80063a71fd90 ffff0000087c7a34 ffff80063afc7180 0000000000000000 [ 20.720462] fca0: 0000ffffcae6fe18 0000000000000014 0000000060000000 0000000000000015 [ 20.728292] fcc0: 0000000000000123 00000000000000ce ffff0000088d2000 ffff80063b1f1900 [ 20.736122] fce0: 0000000000008933 ffff000008e7cb80 ffff80063a71fd80 ffff0000087c50a4 [ 20.743951] fd00: 0000000000008933 ffff000008e7cb80 ffff000008e7cb80 000000100000000e [ 20.751781] fd20: ffff80063a71fe4c 0000ffff00000300 0000000000000123 0000000000000000 [ 20.759611] fd40: 0000000000000000 ffff80063b1f0000 000000000000000e 0000000000000300 [ 20.767441] fd60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 20.775271] fd80: 0000000000000000 0000000000000000 ffff80063a71fda0 ffff0000087c8c20 [ 20.783100] fda0: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000 [ 20.790930] fdc0: ffffffffffffffff 0000ffffa0903078 0000000000000000 000000001ea87232 [ 20.798760] fde0: 000000000000000f ffff80063a71fe40 ffff800600000014 ffff000000000001 [ 20.806590] fe00: 0000000000000000 0000000000000000 ffff80063a71fde8 0000000000000000 [ 20.814420] fe20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001 [ 20.822249] fe40: 0000000203000011 0000000000000000 0000000000000000 ffff80063a68aa00 [ 20.830079] fe60: ffff80063a68aa00 0000000000000003 0000000000008933 ffff0000081f1b9c [ 20.837909] fe80: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000 [ 20.845739] fea0: ffffffffffffffff 0000ffffa07ca81c 0000000060000000 0000000000000015 [ 20.853569] fec0: 0000000000000003 000000001ea87232 000000000000000f 0000000000000000 [ 20.861399] fee0: 0000ffffcae6fe18 0000000000000014 0000000000000300 0000000000000000 [ 20.869228] ff00: 00000000000000ce 0000000000000000 00000000ffffffff 0000000000000000 [ 20.877059] ff20: 0000000000000002 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588 [ 20.884888] ff40: 0000000000000000 0000ffffa09ba018 0000ffffcae6fb20 000000001ea87010 [ 20.892718] ff60: 0000ffffa09b9000 0000ffffcae6fe30 0000ffffcae6fe18 000000000000000f [ 20.900548] ff80: 0000000000000003 000000001ea87232 0000000000000000 0000000000000000 [ 20.908378] ffa0: 0000000000000000 0000ffffcae6fdc0 0000ffffa09a7824 0000ffffcae6fdc0 [ 20.916208] ffc0: 0000ffffa0903078 0000000060000000 0000000000000003 00000000000000ce [ 20.924038] ffe0: 0000000000000000 0000000000000000 ffffffffffffffff ffffffffffffffff [ 20.931867] Call trace: [ 20.934312] Exception stack(0xffff80063a71f7e0 to 0xffff80063a71f910) [ 20.940750] f7e0: 0000000000000000 0001000000000000 ffff80063a71f9b0 ffff00000839c4c0 [ 20.948580] f800: ffff80063a71f840 ffff00000888a6e4 ffff80063a24c418 ffff80063a24c448 [ 20.956410] f820: 0000000000000000 ffff00000811cd54 ffff80063a71f860 ffff80063a24c458 [ 20.964240] f840: ffff80063a71f870 ffff00000888b258 ffff80063a24c418 0000000000000001 [ 20.972070] f860: ffff80063a71f910 ffff80063a7b7028 ffff80063a71f890 ffff0000088825e4 [ 20.979899] f880: 0000000000000000 00000000bafff000 000000067abe2adc 0000000000000000 [ 20.987729] f8a0: 0000000000000001 0000000000000000 ffff000008ed50d0 0000000000000000 [ 20.995560] f8c0: 0000000000000000 0000000000000000 ffff80063abe2adc ffff000008096360 [ 21.003390] f8e0: 000000000063abe2 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588 [ 21.011219] f900: ffff0000087c8b70 0000ffffa09ba018 [ 21.016097] [<ffff00000839c4c0>] swiotlb_tbl_map_single+0x178/0x2ec [ 21.022362] [<ffff00000839c680>] map_single+0x4c/0x98 [ 21.027411] [<ffff00000839cd10>] swiotlb_map_page+0xa4/0x138 [ 21.033072] [<ffff000008096380>] __swiotlb_map_page+0x20/0x7c [ 21.038821] [<ffff00000864f770>] ravb_start_xmit+0x174/0x668 [ 21.044484] [<ffff0000087e6498>] dev_hard_start_xmit+0x8c/0x120 [ 21.050407] [<ffff000008807510>] sch_direct_xmit+0x108/0x1a0 [ 21.056064] [<ffff0000087e67dc>] __dev_queue_xmit+0x194/0x4cc [ 21.061807] [<ffff0000087e6b24>] dev_queue_xmit+0x10/0x18 [ 21.067214] [<ffff000008880240>] packet_sendmsg+0xf40/0x1220 [ 21.072873] [<ffff0000087c7a34>] sock_sendmsg+0x18/0x2c [ 21.078097] [<ffff0000087c8c20>] SyS_sendto+0xb0/0xf0 [ 21.083150] [<ffff000008082f30>] el0_svc_naked+0x24/0x28 [ 21.088462] Code: d34bfef7 2a1803f3 1a9f86d6 35fff878 (d4210000) [ 21.094611] ---[ end trace 5bc544ad491f3814 ]--- [ 21.099234] Kernel panic - not syncing: Fatal exception in interrupt [ 21.105587] Kernel Offset: disabled [ 21.109073] Memory Limit: none [ 21.112126] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Fixes: 2f45d190 ("ravb: minimize TX data copying") Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Acked-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Disable BH around the call to napi_schedule() to avoid following warning [ 52.095499] NOHZ: local_softirq_pending 08 [ 52.421291] NOHZ: local_softirq_pending 08 [ 52.608313] NOHZ: local_softirq_pending 08 Fixes: 8d59de8f ("net/mlx4_en: Process all completions in RX rings after port goes up") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Erez Shitrit <erezsh@mellanox.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Acked-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 1月, 2017 1 次提交
-
-
由 Florian Fainelli 提交于
The __bcm_sysport_tx_reclaim() function is used to reclaim transmit resources in different places within the driver. Most of them should not affect the state of the transit flow control. Introduce bcm_sysport_tx_clean() which cleans the ring, but does not re-enable flow control towards the networking stack, and make bcm_sysport_tx_reclaim() do the actual transmit queue flow control. Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 1月, 2017 1 次提交
-
-
由 Vadim Lomovtsev 提交于
While probing BGX we requesting appropriate QLM for it's configuration and get LMAC count by that request. Then, while reading configured MAC values from SSDT table we need to save them in proper mapping: BGX[i]->lmac[j].mac = <MAC value> to later provide for initialization stuff. In order to fill such mapping properly we need to add lmac index to be used while acpi initialization since at this moment bgx->lmac_count already contains actual value. Signed-off-by: NVadim Lomovtsev <Vadim.Lomovtsev@caviumnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-