Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Saves lots of dwords in blit emit
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

group state that is emitted sequentially into fewer packets.
This saves a number of dwords.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Use of HDP_*_COHERENCY_FLUSH_CNTL can cause a hang in certain
situations.  Add workaround.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

We used to limit the rs4xx gart aperture to 32 MB, but I suspect
that was due to not meeting the alignment requirements of the
aperture.  This patch should only be applied after:
"drm/radeon/kms: fix gtt MC base alignment on rs4xx/rs690/rs740 asics"
has been applied.

This patch should probably soak for a bit in d-r-t.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Need this to avoid conflicts with future radeon fixes

The "error" variable is unsigned so it's never less than zero.  I
changed it to check if (freq < current_freq) directly.

"best_error" is also unsigned so "best_error - 100" could be a large
number instead of a negative.  Since "error" is unsigned it is never
less than a negative and so the cases where "best_error" is less than or
equal to 100 are false.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

On systems using kexec, the new kernel is booted straight from the old kernel, without any warning to the graphics driver. So the GPU is basically left as-is in a running state, however the CPU side is completly reset.

Without stating the saneness of anyone using kexec on live systems, we should at least try not to crash the GPU. This patch resets 3 registers to 0 that could cause bad things to happen to the running system.

This allows kexec to work on a Power6/RN50 system.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This fixes a problem where on low VRAM cards we'd run out of space for validation.

[airlied: Tested on my M7, Thinkpad T42, compiz works with no problems.]
Signed-off-by: NMichel Dänzer <daenzer@vmware.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is required for the NB_MISC regs on rs780/rs880 which
means HDMI/DVI/DP ports using PCIEPHY won't work without
it. It might also help with s/r (asic init) issues on other
atombios cards.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=28774
and similar issues reported by Alberto Milone.

[airlied: Squash io fix patch]
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Tested-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We will need method of selecting encoder that should receive HDMI block. For
now we assign HDMI block to first enabled encoder. Hopefully there are not many
RS6x0 chips with two digital encoders.

[airlied: add RS740 checks as per Alex suggestion.]
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is needed to enable audio support on devices using polling. In case user
decides to disable audio (module parameter) we still will try to use timer in
r600_audio_enable_polling. This would lead to BUG in kernel/timer.c.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Userspace needs this information to access tiled
buffers via the CPU.

v2: rebased on evergreen accel changes
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Covers depth, cb, and textures. Hopefully I got this right.

v2: - fix bugs:
      https://bugs.freedesktop.org/show_bug.cgi?id=28327
      https://bugs.freedesktop.org/show_bug.cgi?id=28381
    - use ALIGNED(), IS_ALIGNED() macros
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Check for relocs for DB_DEPTH_INFO, CB_COLOR*_INFO, and texture
resources.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Needed for scanning out of a tiled buffer.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Needed for scanning out of a tiled buffer.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

rv6xx/rv7xx/evergreen families supported; older asics did
not have an internal thermal sensor.

Note, not all oems use the internal thermal sensor, so it's
only exposed in cases where it is used.

Note also, that most laptops use an oem specific ACPI solution for
GPU thermal information rather than using the internal thermal
sensor directly.

v2: export millidegrees celsius, use hwmon device properly.
v3: fix Kconfig
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

By calling the ATIF method in the radeon driver we can make sure
that hotkeys such as the video switch key emit ACPI events when
pressed.

agd5f: fix warning
Signed-off-by: NAlberto Milone <alberto.milone@canonical.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Some tables have delays that can cause the timeout to hit
even when not intended.

Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=27744
and related bugs.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

- Make the logic in r100_pll_errata_after_index() match the other
errata functions
- Use rdev->family rather than rdev->flags & RADEON_FAMILY_MASK for kms
- replace rn50 check using ids with ASIC_IS_RN50 convenience macro
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics - relax capability ID checks on newer hardware
  Input: twl40300-keypad - fix handling of "all ground" rows
  Input: gamecon - reference correct pad in gc_psx_command()
  Input: gamecon - reference correct input device in NES mode
  Input: w90p910_keypad - change platfrom driver name to 'nuc900-kpi'
  Input: i8042 - add Gigabyte Spring Peak to dmi_noloop_table
  Input: qt2160 - rename kconfig symbol name

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: add quirk to make HP DV5000 laptop resume
  drm/radeon/kms: fix RADEON_INFO_CRTC_FROM_ID info ioctl
  Fix ttm_page_alloc.c build breakage
  drm/radeon/kms: fix legacy LVDS dpms sequence
  drm/radeon/kms: drop taking lock around crtc lookup.

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: talitos - fix bug in sg_copy_end_to_buffer

Merge branch 'x86/auditsyscall' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland

* 'x86/auditsyscall' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland:
  x86: auditsyscall: fix fastpath return value after reschedule

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  sysrq,kdb: Use __handle_sysrq() for kdb's sysrq function
  debug_core,kdb: fix kgdb_connected bit set in the wrong place
  Fix merge regression from external kdb to upstream kdb
  repair gdbstub to match the gdbserial protocol specification
  kdb: break out of kdb_ll() when command is terminated

Fix the security problem in the CIFS filesystem DNS lookup code in which a
malicious redirect could be installed by a random user by simply adding a
result record into one of their keyrings with add_key() and then invoking a
CIFS CFS lookup [CVE-2010-2524].

This is done by creating an internal keyring specifically for the caching of
DNS lookups.  To enforce the use of this keyring, the module init routine
creates a set of override credentials with the keyring installed as the thread
keyring and instructs request_key() to only install lookup result keys in that
keyring.

The override is then applied around the call to request_key().

This has some additional benefits when a kernel service uses this module to
request a key:

 (1) The result keys are owned by root, not the user that caused the lookup.

 (2) The result keys don't pop up in the user's keyrings.

 (3) The result keys don't come out of the quota of the user that caused the
     lookup.

The keyring can be viewed as root by doing cat /proc/keys:

2a0ca6c3 I-----     1 perm 1f030000     0     0 keyring   .dns_resolver: 1/4

It can then be listed with 'keyctl list' by root.

	# keyctl list 0x2a0ca6c3
	1 key in keyring:
	726766307: --alswrv     0     0 dns_resolver: foo.bar.com
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-and-Tested-by: NJeff Layton <jlayton@redhat.com>
Acked-by: NSteve French <smfrench@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=29062Reported-by: NAndres Cimmarusti <acimmarusti@gmail.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Older firmwares fixed the middle byte of the Synaptics capabilities
query to 0x47, but starting with firmware 7.5 the middle byte
represents submodel ID, sometimes also called "dash number".
Reported-and-tested-by: NMiroslav Šulc <fordfrog@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

In the CONFIG_AUDITSYSCALL fast-path for x86 64-bit system calls,
we can pass a bad return value and/or error indication for the
system call to audit_syscall_exit().  This happens when
TIF_NEED_RESCHED was set as the system call returned, so we went
out to schedule() and came back to the exit-audit fast-path.  The
fix is to reload the user return value register from the pt_regs
before using it for audit_syscall_exit().

Both the 32-bit kernel's fast path and the 64-bit kernel's 32-bit
system call fast paths work slightly differently, so that they
always leave the fast path entirely to reschedule and don't return
there, so they don't have the analogous bugs.
Reported-by: NAlexander Viro <aviro@redhat.com>
Signed-off-by: NRoland McGrath <roland@redhat.com>

The kdb code should not toggle the sysrq state in case an end user
wants to try and resume the normal kernel execution.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Immediately following an exit from the kdb shell the kgdb_connected
variable should be set to zero, unless there are breakpoints planted.
If the kgdb_connected variable is not zeroed out with kdb, it is
impossible to turn off kdb.

This patch is merely a work around for now, the real fix will check
for the breakpoints.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

In the process of merging kdb to the mainline, the kdb lsmod command
stopped printing the base load address of kernel modules.  This is
needed for using kdb in conjunction with external tools such as gdb.

Simply restore the functionality by adding a kdb_printf for the base
load address of the kernel modules.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

The gdbserial protocol handler should return an empty packet instead
of an error string when ever it responds to a command it does not
implement.

The problem cases come from a debugger client sending
qTBuffer, qTStatus, qSearch, qSupported.

The incorrect response from the gdbstub leads the debugger clients to
not function correctly.  Recent versions of gdb will not detach correctly as a result of this behavior.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Signed-off-by: NDongdong Deng <dongdong.deng@windriver.com>

Without this patch the "ll" linked-list traversal command won't
terminate when you hit q/Q.
Signed-off-by: NMartin Hicks <mort@sgi.com>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

Return the crtc_id, not the counter value.  They are not
necessarily the same.

Cc: Jerome Glisse <glisse@freedesktop.org>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The commit 1e8655f8
    drm/ttm: Fix build on architectures without AGP

looks at TTM_HAS_AGP before it has been set in ttm_bo_driver.h

Move the conditional inclusion of <asm/agp.h> *after* we have included
ttm_bo_driver.h
Signed-of-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>