Impact: cleanup

Make the max_low_pfn logic a bit more standard between
lowmem_pfn_init() and highmem_pfn_init().
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Split find_low_pfn_range() into two functions:

 - lowmem_pfn_init()
 - highmem_pfn_init()

The former gets called if all of RAM fits into lowmem,
otherwise we call highmem_pfn_init().
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

 arch/x86/mm/init_32.c: In function ‘find_low_pfn_range’:
 arch/x86/mm/init_32.c:696: warning: format ‘%u’ expects type ‘unsigned int’, but
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Debugging and original patch from Nick Piggin <npiggin@suse.de>

The early fixmap pmd entry inserted at the very top of the KVA is causing the
subsequent fixmap mapping code to not provide physically linear pte pages over
the kmap atomic portion of the fixmap (which relies on said property to
calculate pte addresses).

This has caused weird boot failures in kmap_atomic much later in the boot
process (initial userspace faults) on a 32-bit PAE system with a larger number
of CPUs (smaller CPU counts tend not to run over into the next page so don't
show up the problem).

Solve this by attempting to clear out the page table, and copy any of its
entries to the new one. Also, add a bug if a nonlinear condition is encountered
and can't be resolved, which might save some hours of debugging if this fragile
scheme ever breaks again...

Once we have such logic, we can also use it to eliminate the early ioremap
trickery around the page table setup for the fixmap area. This also fixes
potential issues with FIX_* entries sharing the leaf page table with the early
ioremap ones getting discarded by early_ioremap_clear() and not restored by
early_ioremap_reset(). It at once eliminates the temporary (and configuration,
namely NR_CPUS, dependent) unavailability of early fixed mappings during the
time the fixmap area page tables get constructed.

Finally, also replace the hard coded calculation of the initial table space
needed for the fixmap area with a proper one, allowing kernels configured for
large CPU counts to actually boot.

Based-on: Nick Piggin <npiggin@suse.de>
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Device drivers that use pci_request_regions() (and similar APIs) have a
reasonable expectation that they are the only ones accessing their device.
As part of the e1000e hunt, we were afraid that some userland (X or some
bootsplash stuff) was mapping the MMIO region that the driver thought it
had exclusively via /dev/mem or via various sysfs resource mappings.

This patch adds the option for device drivers to cause their reserved
regions to the "banned from /dev/mem use" list, so now both kernel memory
and device-exclusive MMIO regions are banned.
NOTE: This is only active when CONFIG_STRICT_DEVMEM is set.

In addition to the config option, a kernel parameter iomem=relaxed is
provided for the cases where developers want to diagnose, in the field,
drivers issues from userspace.
Reviewed-by: NMatthew Wilcox <willy@linux.intel.com>
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Impact: cleanup, moving NON-SMP stuff from smp.h
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Show node to memory section relationship with symlinks in sysfs

Add /sys/devices/system/node/nodeX/memoryY symlinks for all
the memory sections located on nodeX.  For example:
/sys/devices/system/node/node1/memory135 -> ../../memory/memory135
indicates that memory section 135 resides on node1.

Also revises documentation to cover this change as well as updating
Documentation/ABI/testing/sysfs-devices-memory to include descriptions
of memory hotremove files 'phys_device', 'phys_index', and 'state'
that were previously not described there.

In addition to it always being a good policy to provide users with
the maximum possible amount of physical location information for
resources that can be hot-added and/or hot-removed, the following
are some (but likely not all) of the user benefits provided by
this change.
Immediate:
  - Provides information needed to determine the specific node
    on which a defective DIMM is located.  This will reduce system
    downtime when the node or defective DIMM is swapped out.
  - Prevents unintended onlining of a memory section that was
    previously offlined due to a defective DIMM.  This could happen
    during node hot-add when the user or node hot-add assist script
    onlines _all_ offlined sections due to user or script inability
    to identify the specific memory sections located on the hot-added
    node.  The consequences of reintroducing the defective memory
    could be ugly.
  - Provides information needed to vary the amount and distribution
    of memory on specific nodes for testing or debugging purposes.
Future:
  - Will provide information needed to identify the memory
    sections that need to be offlined prior to physical removal
    of a specific node.

Symlink creation during boot was tested on 2-node x86_64, 2-node
ppc64, and 2-node ia64 systems.  Symlink creation during physical
memory hot-add tested on a 2-node x86_64 system.
Signed-off-by: NGary Hade <garyhade@us.ibm.com>
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NIngo Brueckl <ib@wupperonline.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Impact: cleanup

This compiler warning:

  arch/x86/mm/init_32.c:515: warning: unused variable 'pgd_base'

triggers because permanent_kmaps_init() is a CPP macro in the
!CONFIG_HIGHMEM case, that does not tell the compiler that the
'pgd_base' parameter is used.

Convert permanent_kmaps_init() (and set_highmem_pages_init()) to
C inline functions - which gives the parameter a proper type and
which gets rid of the compiler warning as well.
Signed-off-by: NIngo Brueckl <ib@wupperonline.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

swiotlb on 32 bit will be used by Xen domain 0 support.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Some of the inconsistencies checked for at run time can be detected at
build time already, so duplicate the checks done at run time to also be
done at build time.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Neither of the callers really needs the physical address this function
returns, so eliminate the pointless argument.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: simplify implementation, cleanup

If !(pgd_val(*pgd) & _PAGE_PRESENT) in PAE mode, we need not get value of
pmd_table again.
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: introduce new APIs, separate kmap code from CONFIG_HIGHMEM

This takes the code used for CONFIG_HIGHMEM memory mappings except that
it's designed for dynamic IO resource mapping.

These fixmaps are available even with CONFIG_HIGHMEM turned off.
Signed-off-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: change the implementation of the debug feature

the periodic corruption checks are better off run from a work queue; there's
nothing time critical about them and this way the amount of
interrupt-context work is reduced.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

to prepare to use dyn_array support etc.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use one of the software-defined PTE bits to indicate that a mapping is
intended for an IO address.  On native hardware this is irrelevent,
since a physical address is a physical address.  But in a virtual
environment, physical addresses are also virtualized, so there needs
to be some way to distinguish between pseudo-physical addresses and
actual hardware addresses; _PAGE_IOMAP indicates this intent.

By default, __supported_pte_mask masks out _PAGE_IOMAP, so it doesn't
even appear in the final pagetable.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move the prototypes from the generic kernel.h header to the more
appropriate include/asm-x86/bios_ebda.h header file.

Also, remove the check from the power management code - this is a
pure x86 matter for now.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Interrupt context no longer splits large page in cpa(). So we can do away
with cpa memory pool code.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: arjan@linux.intel.com
Cc: venkatesh.pallipadi@intel.com
Cc: jeremy@goop.org
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Don't use large pages for kernel identity mapping with DEBUG_PAGEALLOC.
This will remove the need to split the large page for the
allocated kernel page in the interrupt context.

This will simplify cpa code(as we don't do the split any more from the
interrupt context). cpa code simplication in the subsequent patches.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: arjan@linux.intel.com
Cc: venkatesh.pallipadi@intel.com
Cc: jeremy@goop.org
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In the first pass, kernel physical mapping will be setup using large or
small pages but uses the same PTE attributes as that of the early
PTE attributes setup by early boot code in head_[32|64].S

After flushing TLB's, we go through the second pass, which setups the
direct mapped PTE's with the appropriate attributes (like NX, GLOBAL etc)
which are runtime detectable.

This two pass mechanism conforms to the TLB app note which says:

"Software should not write to a paging-structure entry in a way that would
 change, for any linear address, both the page size and either the page frame
 or attributes."
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: arjan@linux.intel.com
Cc: venkatesh.pallipadi@intel.com
Cc: jeremy@goop.org
Signed-off-by: NIngo Molnar <mingo@elte.hu>

They were already called once in arch/x86/kernel/setup.c - we don't need to call them again.

fixes:

  http://bugzilla.kernel.org/show_bug.cgi?id=11485Signed-off-by: NAlex Nixon <alex.nixon@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Perodically check for corruption in low phusical memory.  Don't bother
checking at fault time, since it won't show anything useful.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

They were already called once in arch/x86/kernel/setup.c - we don't need to call them again.
Signed-off-by: NAlex Nixon <alex.nixon@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

included <asm/smp.h> in mm/init_32.c for zap_low_mappings()

declared free_initmem() in asm-x86/page_XX.h
Signed-off-by: NJaswinder Singh <jaswinder@infradead.org>

only supports memory below max_low_pfn.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

when more than 4g memory is installed, don't map the big hole below 4g.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Older x86-32 processors do not support global mappings (PGD), so must
only use it if the processor supports it.

The _PAGE_KERNEL* flags always have _PAGE_KERNEL set, since logically
we always want it set.

This is OK even on processors which do not support PGD, since all
_PAGE flags are masked with __supported_pte_mask before being turned
into a real in-pagetable pte.  On 32-bit systems, __supported_pte_mask
is initialized to not contain _PAGE_GLOBAL, and it is then added if
the CPU is found to support it.

The x86-32 code used to use __PAGE_KERNEL/__PAGE_KERNEL_EXEC for this
purpose, but they're now redundant and can be removed.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

move out e820_register_active_regions from non numa zones_sizes_init()
and remove numa version zones_sizes_init().

and let 32 bit call remove_all_active_ranges() in setup_arch() directly
like 64-bit
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

use PMD_SHIFT to calculate boundary also adjust size for pre-allocated
table size
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

some ram-end boundary only has page alignment, instead of 2M alignment.

v2: make init_memory_mapping more solid: start could be any value other than 0
v3: fix NON PAE by handling left over in kernel_physical_mapping
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

do that in init_memory_mapping

also remove one init_ohci1394_dma_on_all_controllers
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The patch "x86: introduce init_memory_mapping for 32bit" does not allocate
enough space for PTEs if the CPU does not implement PSE.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

move kva related early backto initmem_init for numa32
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

moving relocate_initrd early
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

... so can we use mem below max_low_pfn earlier.

this allows us to move several functions more early instead of waiting
to after paging_init.

That includes moving relocate_initrd() earlier in the bootup, and kva
related early setup done in initmem_init. (in followup patches)
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

those function depend on paging setup pgtable, so they could access
the ram in bootmem region but just get mapped.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>