Set the backing device info capabilities for /dev/mem and /dev/kmem to
permit direct sharing under no-MMU conditions and full mapping capabilities
under MMU conditions.  Make the BDI used by these available to all directly
mappable character devices.

Also comment the capabilities for /dev/zero.

[akpm@osdl.org: ifdef reductions]
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The function is exported but not used from anywhere else.  It's also marked as
"not for driver use" so noone out there should really care.
Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Implement do_no_pfn() for handling mapping of memory without a struct page
backing it.  This avoids creating fake page table entries for regions which
are not backed by real memory.

This feature is used by the MSPEC driver and other users, where it is
highly undesirable to have a struct page sitting behind the page (for
instance if the page is accessed in cached mode via the struct page in
parallel to the the driver accessing it uncached, which can result in data
corruption on some architectures, such as ia64).

This version uses specific NOPFN_{SIGBUS,OOM} return values, rather than
expect all negative pfn values would be an error.  It also bugs on cow
mappings as this would not work with the VM.

[akpm@osdl.org: micro-optimise]
Signed-off-by: NJes Sorensen <jes@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add the node in order to optimize zone_to_nid.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Acked-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

GFP_THISNODE must be set to 0 in the non numa case otherwise we disable retry
and warnings for failing allocations in the SMP and UP case.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The NUMA_BUILD constant is always available and will be set to 1 on
NUMA_BUILDs.  That way checks valid only under CONFIG_NUMA can easily be done
without #ifdef CONFIG_NUMA

F.e.

if (NUMA_BUILD && <numa_condition>) {
...
}

[akpm: not a thing we'd normally do, but CONFIG_NUMA is special: it is
 causing ifdef explosion in core kernel, so let's see if this is a comfortable
 way in whcih to control that]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This moves the definition of struct page from mm.h to its own header file
page-struct.h.  This is a prereq to fix SetPageUptodate which is broken on
s390:

#define SetPageUptodate(_page)
       do {
               struct page *__page = (_page);
               if (!test_and_set_bit(PG_uptodate, &__page->flags))
                       page_test_and_clear_dirty(_page);
       } while (0)

_page gets used twice in this macro which can cause subtle bugs.  Using
__page for the page_test_and_clear_dirty call doesn't work since it causes
yet another problem with the page_test_and_clear_dirty macro as well.

In order to avoid all these problems caused by macros it seems to be a good
idea to get rid of them and convert them to static inline functions.
Because of header file include order it's necessary to have a seperate
header file for the struct page definition.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The VM is supposed to minimise the number of pages which get written off the
LRU (for IO scheduling efficiency, and for high reclaim-success rates).  But
we don't actually have a clear way of showing how true this is.

So add `nr_vmscan_write' to /proc/vmstat and /proc/zoneinfo - the number of
pages which have been written by the vm scanner in this zone and globally.

Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Arch-independent zone-sizing determines the size of a node
(pgdat->node_spanned_pages) based on the physical memory that was
registered by the architecture.  However, when
CONFIG_MEMORY_HOTPLUG_RESERVE is set, the architecture expects that the
spanned_pages will be much larger and that mem_map will be allocated that
is used lated on memory hot-add.

This patch allows an architecture that sets CONFIG_MEMORY_HOTPLUG_RESERVE
to call push_node_boundaries() which will set the node beginning and end to
at *least* the requested boundary.

Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The x86_64 code accounted for memmap and some portions of the the DMA zone as
holes.  This was because those areas would never be reclaimed and accounting
for them as memory affects min watermarks.  This patch will account for the
memmap as a memory hole.  Architectures may optionally use set_dma_reserve()
if they wish to account for a portion of memory in ZONE_DMA as a hole.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Size zones and holes in an architecture independent manner for ia64.

[bob.picco@hp.com: fix ia64 FLATMEM+VIRTUAL_MEM_MAP]
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NBob Picco <bob.picco@hp.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NBob Picco <bob.picco@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Size zones and holes in an architecture independent manner for x86_64.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

At a basic level, architectures define structures to record where active
ranges of page frames are located.  Once located, the code to calculate zone
sizes and holes in each architecture is very similar.  Some of this zone and
hole sizing code is difficult to read for no good reason.  This set of patches
eliminates the similar-looking architecture-specific code.

The patches introduce a mechanism where architectures register where the
active ranges of page frames are with add_active_range().  When all areas have
been discovered, free_area_init_nodes() is called to initialise the pgdat and
zones.  The zone sizes and holes are then calculated in an architecture
independent manner.

Patch 1 introduces the mechanism for registering and initialising PFN ranges
Patch 2 changes ppc to use the mechanism - 139 arch-specific LOC removed
Patch 3 changes x86 to use the mechanism - 136 arch-specific LOC removed
Patch 4 changes x86_64 to use the mechanism - 74 arch-specific LOC removed
Patch 5 changes ia64 to use the mechanism - 52 arch-specific LOC removed
Patch 6 accounts for mem_map as a memory hole as the pages are not reclaimable.
	It adjusts the watermarks slightly

Tony Luck has successfully tested for ia64 on Itanium with tiger_defconfig,
gensparse_defconfig and defconfig.  Bob Picco has also tested and debugged on
IA64.  Jack Steiner successfully boot tested on a mammoth SGI IA64-based
machine.  These were on patches against 2.6.17-rc1 and release 3 of these
patches but there have been no ia64-changes since release 3.

There are differences in the zone sizes for x86_64 as the arch-specific code
for x86_64 accounts the kernel image and the starting mem_maps as memory holes
but the architecture-independent code accounts the memory as present.

The big benefit of this set of patches is a sizable reduction of
architecture-specific code, some of which is very hairy.  There should be a
greater reduction when other architectures use the same mechanisms for zone
and hole sizing but I lack the hardware to test on.

Additional credit;
	Dave Hansen for the initial suggestion and comments on early patches
	Andy Whitcroft for reviewing early versions and catching numerous
		errors
	Tony Luck for testing and debugging on IA64
	Bob Picco for fixing bugs related to pfn registration, reviewing a
		number of patch revisions, providing a number of suggestions
		on future direction and testing heavily
	Jack Steiner and Robin Holt for testing on IA64 and clarifying
		issues related to memory holes
	Yasunori for testing on IA64
	Andi Kleen for reviewing and feeding back about x86_64
	Christian Kujau for providing valuable information related to ACPI
		problems on x86_64 and testing potential fixes

This patch:

Define the structure to represent an active range of page frames within a node
in an architecture independent manner.  Architectures are expected to register
active ranges of PFNs using add_active_range(nid, start_pfn, end_pfn) and call
free_area_init_nodes() passing the PFNs of the end of each zone.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NBob Picco <bob.picco@hp.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We need processor.h for cpu_relax().

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

un-, de-, -free, -destroy, -exit, etc functions should in general return
void.  Also,

There is very little, say, filesystem driver code can do upon failed
kmem_cache_destroy().  If it will be decided to BUG in this case, BUG
should be put in generic code, instead.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fixing up some endian-ness warnings in preparation to clone ext4 from ext3.
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

More white space cleanups in preparation of cloning ext4 from ext3.
Removing spaces that precede a tab.
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These are a few places I've found in jbd that look like they may not be
16T-safe, or consistent with the use of unsigned longs for block
containers.  Problems here would be somewhat hard to hit, would require
journal blocks past the 8T boundary, which would not be terribly common.
Still, should fix.

(some of these have come from the ext4 work on jbd as well).

I think there's one more possibility that the wrap() function may not be
safe IF your last block in the journal butts right up against the 232 block
boundary, but that seems like a VERY remote possibility, and I'm not
worrying about it at this point.
Signed-off-by: NEric Sandeen <esandeen@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove whitespace from ext3 and jbd, before we clone ext4.

Signed-off-by: Mingming Cao<cmm@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix build error introduced by 3212fe15

Non-NUMA case should be handled.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

MIPS is the only port to call its fstatat()-related syscalls
"__NR_fstatat".  Now I can see why that might be seen as every
other port being wrong, but I think for o32, it is at best confusing.
__NR_fstat provides a plain (32-bit) stat while __NR_fstatat provides a
64-bit stat.  Changing the name to __NR_fstatat64 would make things more
explicit, match x86, and make the glibc port slightly easier.

The current name is more appropriate for n32 and n64, but it would be
appropriate for other 64-bit targets too, and those targets have chosen
to call it __NR_newfstatat instead.  Using the same name for MIPS would
again be more consistent and make the glibc port slightly easier.

I'm not wedded to this idea if the current names are preferred,
but FWIW...
Signed-off-by: NRichard Sandiford <richard@codesourcery.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Mostly based on patch by Chris Dearman and cleanups from Yoichi.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The code in pgtable-64.h assumes TASK_SIZE is always bigger than a first
level PGDIR_SIZE. This is not the case for 64K pages, where task size is
40 bits (1TB) and a pgd entry can map 42 bits. This leads to
USER_PTRS_PER_PGD being zero for 64K pages.
Signed-off-by: NPeter Watkins <treestem@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

excite_fpga.h, like all platform headers, really belongs in the
platform header directory.
Signed-off-by: NThomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The following change updates the Atlas interrupt handling to match that
of Malta.  Tested with a 5Kc and a 34Kf successfully.
Signed-off-by: NMaciej W. Rozycki <macro@mips.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Atlas maps its RTC chip in the host mmio space rather than using the
"traditional" location in the PCI/ISA port space.  A change that has
happened to the generic RTC header requires to define ARCH_RTC_LOCATION
now.
Signed-off-by: NMaciej W. Rozycki <macro@mips.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* export asm/sgidefs.h
* include asm/isadep.h only if in kernel
* do not export contents of asm/timex.h and asm/user.h
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

generic__raw_read_trylock() is a defect generic function actually doing
a __raw_read_lock ...
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

On the 34K the redundant cache operations were causing excessive stalls
resulting in realtime code running on the second VPE missing its deadline.
For all other platforms this patch is just a significant performance
improvment as illustrated by below benchmark numbers.

Processor, Processes - times in microseconds - smaller is better
------------------------------------------------------------------------------
Host                 OS  Mhz null null      open slct sig  sig  fork exec sh
                             call  I/O stat clos TCP  inst hndl proc proc proc
--------- ------------- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
25Kf      2.6.18-rc4     533 0.49 1.16 7.57 33.4 30.5 1.34 12.4 5497 17.K 54.K
25Kf      2.6.18-rc4-p   533 0.49 1.16 6.68 23.0 30.7 1.36 8.55 5030 16.K 48.K
4Kc       2.6.18-rc4      80 4.21 15.0 131. 289. 261. 16.5 258. 18.K 70.K 227K
4Kc       2.6.18-rc4-p    80 4.34 13.1 128. 285. 262. 18.2 258. 12.K 52.K 176K
34Kc      2.6.18-rc4      40 5.01 14.0 61.6 90.0 477. 17.9 94.7 29.K 108K 342K
34Kc      2.6.18-rc4-p    40 4.98 13.9 61.2 89.7 475. 17.6 93.7 8758 44.K 158K
BCM1480   2.6.18-rc4     700 0.28 0.60 3.68 5.92 16.0 0.78 5.08 931. 3163 15.K
BCM1480   2.6.18-rc4-p   700 0.28 0.61 3.65 5.85 16.0 0.79 5.20 395. 1464 8385
TX49-16K  2.6.18-rc3     197 0.73 2.41 19.0 37.8 82.9 2.94 17.5 4438 14.K 56.K
TX49-16K  2.6.18-rc3-p   197 0.73 2.40 19.9 36.3 82.9 2.94 23.4 2577 9103 38.K
TX49-32K  2.6.18-rc3     396 0.36 1.19 6.80 11.8 41.0 1.46 8.17 2738 8465 32.K
TX49-32K  2.6.18-rc3-p   396 0.36 1.19 6.82 10.2 41.0 1.46 8.18 1330 4638 18.K
    
Original patch by me with enhancements by Atsushi Nemoto.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>

CONFIG_IRQ_PER_CPU now controls the IRQ_PER_CPU stuff.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>