- 30 4月, 2008 5 次提交
-
-
由 Heiko Carstens 提交于
This exposes the core siblings to user space via sysfs. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Mathieu Desnoyers 提交于
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> CC: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
On some smp sysfs store attributes get_online_cpus() may block on cpu_hotplug.lock, but we hold already smp_cpu_state_mutex. Since the locking order on cpu hotplug via arch_update_cpu_topology is inverse this might lead to deadlocks. So make sure locking order is always the same. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
This is where it should be and we can get rid of some externs and a static inline function. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 29 4月, 2008 3 次提交
-
-
由 Christoph Lameter 提交于
New version that does not preserve the marker. Arch maintainers indicate that the marker functionality is is not needed anymore. Note you may simplify the s390 asm-offsets.c code further if you use the OFFSET() macro instead of the DEFINE. See kbuild.h Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
s390 has a strange marker in DEFINE. Undefine the DEFINE from kbuild.h and define it the way s390 wants it to preserve things as they were. May be good if the arch maintainer could go over this and check if this workaround is really necessary. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adrian Bunk 提交于
Add a proper prototype for __do_softirq() in include/linux/interrupt.h Signed-off-by: NAdrian Bunk <bunk@kernel.org> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 4月, 2008 3 次提交
-
-
由 Carsten Otte 提交于
This patch adds functionality to detect if the kernel runs under the KVM hypervisor. A macro MACHINE_IS_KVM is exported for device drivers. This allows drivers to skip device detection if the systems runs non-virtualized. We also define a preferred console to avoid having the ttyS0, which is a line mode only console. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Heiko Carstens 提交于
This patch contains the port of Qumranet's kvm kernel module to IBM zSeries (aka s390x, mainframe) architecture. It uses the mainframe's virtualization instruction SIE to run virtual machines with up to 64 virtual CPUs each. This port is only usable on 64bit host kernels, and can only run 64bit guest kernels. However, running 31bit applications in guest userspace is possible. The following source files are introduced by this patch arch/s390/kvm/kvm-s390.c similar to arch/x86/kvm/x86.c, this implements all arch callbacks for kvm. __vcpu_run calls back into sie64a to enter the guest machine context arch/s390/kvm/sie64a.S assembler function sie64a, which enters guest context via SIE, and switches world before and after that include/asm-s390/kvm_host.h contains all vital data structures needed to run virtual machines on the mainframe include/asm-s390/kvm.h defines kvm_regs and friends for user access to guest register content arch/s390/kvm/gaccess.h functions similar to uaccess to access guest memory arch/s390/kvm/kvm-s390.h header file for kvm-s390 internals, extended by later patches Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Carsten Otte 提交于
The SIE instruction on s390 uses the 2nd half of the page table page to virtualize the storage keys of a guest. This patch offers the s390_enable_sie function, which reorganizes the page tables of a single-threaded process to reserve space in the page table: s390_enable_sie makes sure that the process is single threaded and then uses dup_mm to create a new mm with reorganized page tables. The old mm is freed and the process has now a page status extended field after every page table. Code that wants to exploit pgstes should SELECT CONFIG_PGSTE. This patch has a small common code hit, namely making dup_mm non-static. Edit (Carsten): I've modified Martin's patch, following Jeremy Fitzhardinge's review feedback. Now we do have the prototype for dup_mm in include/linux/sched.h. Following Martin's suggestion, s390_enable_sie() does now call task_lock() to prevent race against ptrace modification of mm_users. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Acked-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
- 19 4月, 2008 1 次提交
-
-
由 Matthew Wilcox 提交于
None of these files use any of the functionality promised by asm/semaphore.h. It's possible that they rely on it dragging in some unrelated header file, but I can't build all these files, so we'll have fix any build failures as they come up. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
- 17 4月, 2008 11 次提交
-
-
由 Matthew Wilcox 提交于
Semaphores are no longer performance-critical, so a generic C implementation is better for maintainability, debuggability and extensibility. Thanks to Peter Zijlstra for fixing the lockdep warning. Thanks to Harvey Harrison for pointing out that the unlikely() was unnecessary. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Acked-by: NIngo Molnar <mingo@elte.hu>
-
由 Christian Borntraeger 提交于
Newer s390 models have a breaking-event-address-recording register. Each time an instruction causes a break in the sequential instruction execution, the address is saved in that hardware register. On a program interrupt the address is copied to the lowcore address 272-279, which makes it software accessible. This patch changes the program check handler and the stack overflow checker to copy the value into the pt_regs argument. The oops output is enhanced to show the last known breaking address. It might give additional information if the stack trace is corrupted. The feature is only available on 64 bit. The new oops output looks like: [---------snip----------] Modules linked in: vmcp sunrpc qeth_l2 dm_mod qeth ccwgroup CPU: 2 Not tainted 2.6.24zlive-host #8 Process modprobe (pid: 4788, task: 00000000bf3d8718, ksp: 00000000b2b0b8e0) Krnl PSW : 0704200180000000 000003e000020028 (vmcp_init+0x28/0xe4 [vmcp]) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3 Krnl GPRS: 0000000004000002 000003e000020000 0000000000000000 0000000000000001 000000000015734c ffffffffffffffff 000003e0000b3b00 0000000000000000 000003e00007ca30 00000000b5bb5d40 00000000b5bb5800 000003e0000b3b00 000003e0000a2000 00000000003ecf50 00000000b2b0bd50 00000000b2b0bcb0 Krnl Code: 000003e000020018: c0c000040ff4 larl %r12,3e0000a2000 000003e00002001e: e3e0f0000024 stg %r14,0(%r15) 000003e000020024: a7f40001 brc 15,3e000020026 >000003e000020028: e310c0100004 lg %r1,16(%r12) 000003e00002002e: c020000413dc larl %r2,3e0000a27e6 000003e000020034: c0a00004aee6 larl %r10,3e0000b5e00 000003e00002003a: a7490001 lghi %r4,1 000003e00002003e: a75900f0 lghi %r5,240 Call Trace: ([<000000000014b300>] blocking_notifier_call_chain+0x2c/0x40) [<000000000015735c>] sys_init_module+0x19d8/0x1b08 [<0000000000110afc>] sysc_noemu+0x10/0x16 [<000002000011cda2>] 0x2000011cda2 Last Breaking-Event-Address: [<000003e000020024>] vmcp_init+0x24/0xe4 [vmcp] [---------snip----------] Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Heiko Carstens 提交于
Most noteable part of this commit is the new local header file entry.h which contains all the function declarations of functions that get only called from asm code or are arch internal. That way we can avoid extern declarations in C files. This is more or less the same that was done for sparc64. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Heiko Carstens 提交于
This way we get rid of s390's NO_IDLE_HZ and use the generic dynticks variant instead. In addition we get high resolution timers for free. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Heiko Carstens 提交于
Remove the program check generating monitor calls and use function calls instead. Theres is no real advantage in using monitor calls, but they do make debugging harder, because of all the program checks it generates. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Michael Holzheu 提交于
The new function supports setting of permissions for the debugfs files created by the debug feature. In addition to that, the function provides uid and gid as parameters for future use. Currently only root is allowed for uid and gid. Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Jan Glauber 提交于
Add get_clock_xt to read an 8 byte clock value using store clock extended (STCKE) and use get_clock_xt for sched_clock. STCKE should be faster than STCK on newer machines. Signed-off-by: NJan Glauber <jan.glauber@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Heiko Carstens 提交于
If vertical cpu polarization is active then the hypervisor will dispatch certain cpus for a longer time than other cpus for maximum performance. For example if a guest would have three virtual cpus, each of them with a share of 33 percent, then in case of vertical cpu polarization all of the processing time would be combined to a single cpu which would run all the time, while the other two cpus would get nearly no cpu time. There are three different types of vertical cpus: high, medium and low. Low cpus hardly get any real cpu time, while high cpus get a full real cpu. Medium cpus get something in between. In order to switch between the two possible modes (default is horizontal) a 0 for horizontal polarization or a 1 for vertical polarization must be written to the dispatching sysfs attribute: /sys/devices/system/cpu/dispatching The polarization of each single cpu can be figured out by the polarization sysfs attribute of each cpu: /sys/devices/system/cpu/cpuX/polarization horizontal, vertical:high, vertical:medium, vertical:low or unknown. When switching polarization the polarization attribute may contain the value unknown until the configuration change is done and the kernel has figured out the new polarization of each cpu. Note that running a system with different types of vertical cpus may result in significant performance regressions. If possible only one type of vertical cpus should be used. All other cpus should be offlined. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Heiko Carstens 提交于
Add s390 backend so we can give the scheduler some hints about the cpu topology. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Heiko Carstens 提交于
Make stfle visible so other code can call this. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Heiko Carstens 提交于
This is just a port of 83bd0102 "x86: protect against sigaltstack wraparound". Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
- 05 3月, 2008 4 次提交
-
-
由 Hongjie Yang 提交于
/sys/firmware/reipl/nss/name contains the nss name when defsys or savesys command has been executed. If the defsys or savesys command fails the kernel_nss_name has to be cleared since a reipl on that nss name won't be possible. Signed-off-by: NHongjie Yang <hongjie@us.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
Normally this should not happen, but it's cleaner to do it that way. Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Compile smp.o with -Wno-nonnull so gcc stops warning about memcpy being used with a null parameter. Also remove the workaround code and use a char * cast instead of a void * cast to do computations. Cc: Bastian Blank <bastian@waldi.eu.org> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
If a machine check handling is pending when the idle loop is entered default_idle will be left with timer ticks and virtual timer disabled. Fix this by "calling" the idle_chain. Also a BUG_ON(!in_interrupt) in start_hz_timer must be removed since the function now gets called from non interrupt context as well. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 19 2月, 2008 3 次提交
-
-
由 Heiko Carstens 提交于
Since a5fbb6d1 "KVM: fix !SMP build error" smp_call_function isn't a define anymore that folds into nothing but a define that calls up_smp_call_function with all parameters. Hence we cannot #ifdef out the unused code anymore... This seems to be the preferred method, so do this for s390 as well. arch/s390/kernel/time.c: In function 'etr_sync_clock': arch/s390/kernel/time.c:825: error: 'clock_sync_cpu_start' undeclared arch/s390/kernel/time.c:862: error: 'clock_sync_cpu_end' undeclared Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Just copy the first 512 read-only bytes of the current cpu lowcore if a new cpu gets onlined. The rest is zeroed out and must be explicitly initialized. Current code just copies the entire lowcore and initializes the needed fields. This should reveal bugs in future enhancements quite early. Also when the lowcore of the first cpu is replaced this is now done atomically (no interrupts, no machine checks). Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
If both NO_IDLE_HZ and VIRT_TIMER are disabled default_idle won't load an enabled wait psw and busy loop instead. This is because the idle_chain is empty and the return value of atomic_notifier_call_chain will be NOTIFY_DONE, which causes default_idle to return instead of loading an enabled wait psw. Fix this by calling __atomic_notifier_call_chain instead and add proper return value handling. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 10 2月, 2008 3 次提交
-
-
由 Martin Schwidefsky 提交于
Add support for different number of page table levels dependent on the highest address used for a process. This will cause a 31 bit process to use a two level page table instead of the four level page table that is the default after the pud has been introduced. Likewise a normal 64 bit process will use three levels instead of four. Only if a process runs out of the 4 tera bytes which can be addressed with a three level page table the fourth level is dynamically added. Then the process can use up to 8 peta byte. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 09 2月, 2008 1 次提交
-
-
由 Eric W. Biederman 提交于
Currently we possibly lookup the pid in the wrong pid namespace. So seq_file convert proc_pid_status which ensures the proper pid namespaces is passed in. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: another build fix] [akpm@linux-foundation.org: s390 build fix] [akpm@linux-foundation.org: fix task_name() output] [akpm@linux-foundation.org: fix nommu build] Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Cc: Andrew Morgan <morgan@kernel.org> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Paul Jackson <pj@sgi.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 2月, 2008 1 次提交
-
-
由 Bernhard Walle 提交于
This patchset adds a flags variable to reserve_bootmem() and uses the BOOTMEM_EXCLUSIVE flag in crashkernel reservation code to detect collisions between crashkernel area and already used memory. This patch: Change the reserve_bootmem() function to accept a new flag BOOTMEM_EXCLUSIVE. If that flag is set, the function returns with -EBUSY if the memory already has been reserved in the past. This is to avoid conflicts. Because that code runs before SMP initialisation, there's no race condition inside reserve_bootmem_core(). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix powerpc build] Signed-off-by: NBernhard Walle <bwalle@suse.de> Cc: <linux-arch@vger.kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 2月, 2008 1 次提交
-
-
由 Davide Libenzi 提交于
This is the new timerfd API as it is implemented by the following patch: int timerfd_create(int clockid, int flags); int timerfd_settime(int ufd, int flags, const struct itimerspec *utmr, struct itimerspec *otmr); int timerfd_gettime(int ufd, struct itimerspec *otmr); The timerfd_create() API creates an un-programmed timerfd fd. The "clockid" parameter can be either CLOCK_MONOTONIC or CLOCK_REALTIME. The timerfd_settime() API give new settings by the timerfd fd, by optionally retrieving the previous expiration time (in case the "otmr" parameter is not NULL). The time value specified in "utmr" is absolute, if the TFD_TIMER_ABSTIME bit is set in the "flags" parameter. Otherwise it's a relative time. The timerfd_gettime() API returns the next expiration time of the timer, or {0, 0} if the timerfd has not been set yet. Like the previous timerfd API implementation, read(2) and poll(2) are supported (with the same interface). Here's a simple test program I used to exercise the new timerfd APIs: http://www.xmailserver.org/timerfd-test2.c [akpm@linux-foundation.org: coding-style cleanups] [akpm@linux-foundation.org: fix ia64 build] [akpm@linux-foundation.org: fix m68k build] [akpm@linux-foundation.org: fix mips build] [akpm@linux-foundation.org: fix alpha, arm, blackfin, cris, m68k, s390, sparc and sparc64 builds] [heiko.carstens@de.ibm.com: fix s390] [akpm@linux-foundation.org: fix powerpc build] [akpm@linux-foundation.org: fix sparc64 more] Signed-off-by: NDavide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 2月, 2008 4 次提交
-
-
由 Heiko Carstens 提交于
Remove BUILD_BUG_ON() in vmem code since it causes build failures if the size of struct page increases. Instead calculate at compile time the address of the highest physical address that can be added to the 1:1 mapping. This supposed to fix a build failure with the page owner tracking leak detector patches as reported by akpm. page-owner-tracking-leak-detector-broken-on-s390.patch can be removed from -mm again when this is merged. Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Cc: Holger Wolf <wolf@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Peter Oberparleiter 提交于
Fix console detection logic to support configurations in which the vt220 console is the only available Linux console. Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Fix couple of section mismatches. And since we touch the code anyway change the IPL code to use C99 initializers. Cc: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-