1. 25 2月, 2010 4 次提交
    • T
      perf/scripts: Add perf-trace-python Documentation · cff68e58
      Tom Zanussi 提交于
      Also small update to perf-trace-perl and perf-trace docs.
      Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      LKML-Reference: <1264580883-15324-13-git-send-email-tzanussi@gmail.com>
      Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
      cff68e58
    • T
      perf/scripts: Remove unnecessary PyTuple resizes · 44ad9cd8
      Tom Zanussi 提交于
      If we know the size of a tuple in advance, there's no need to resize
      it - start out with the known size in the first place.
      Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      LKML-Reference: <1266822779.6426.4.camel@tropicana>
      Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
      44ad9cd8
    • T
      perf/scripts: Add syscall tracing scripts · 4d161f03
      Tom Zanussi 提交于
      Adds a set of scripts that aggregate system call totals and system
      call errors.  Most are Python scripts that also test basic
      functionality of the new Python engine, but there's also one Perl
      script added for comparison and for reference in some new
      Documentation contained in a later patch.
      Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      LKML-Reference: <1264580883-15324-8-git-send-email-tzanussi@gmail.com>
      Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
      4d161f03
    • T
      perf/scripts: Add Python scripting engine · 7e4b21b8
      Tom Zanussi 提交于
      Add base support for Python scripting to perf trace.
      Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      LKML-Reference: <1264580883-15324-6-git-send-email-tzanussi@gmail.com>
      Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
      7e4b21b8
  2. 24 2月, 2010 5 次提交
    • T
      perf/scripts: Remove check-perf-trace from listed scripts · 266fe2f2
      Tom Zanussi 提交于
      The check-perf-trace script only checks Perl functionality, and
      doesn't really need to be listed as as user script anyway.
      
      This only removes the '-report' shell script, so although it doesn't
      appear in the listing, the '-record' shell script and the check perf
      trace perl script itself is still available and can still be run
      manually as such:
      
      $ libexec/perf-core/scripts/perl/bin/check-perf-trace-record
      $ perf trace -s libexec/perf-core/scripts/perl/check-perf-trace.pl
      Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      LKML-Reference: <1264580883-15324-6-git-send-email-tzanussi@gmail.com>
      Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
      266fe2f2
    • T
      perf/scripts: Move Perl scripting files to scripting-engines dir · 82d156cd
      Tom Zanussi 提交于
      Create a scripting-engines directory to contain scripting engine
      implementation code, in anticipation of the addition of new scripting
      support.  Also removes trace-event-perl.h.
      Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      LKML-Reference: <1264580883-15324-5-git-send-email-tzanussi@gmail.com>
      Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
      82d156cd
    • T
      perf/scripts: Move common code out of Perl-specific files · 7397d80d
      Tom Zanussi 提交于
      This stuff is needed by all scripting engines; move it from the Perl
      engine source to a more common place.
      Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      LKML-Reference: <1264580883-15324-4-git-send-email-tzanussi@gmail.com>
      Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
      7397d80d
    • T
      perf/scripts: Fix bug in Util.pm · e26207a3
      Tom Zanussi 提交于
      Fix bogus calculation.
      Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      LKML-Reference: <1264580883-15324-3-git-send-email-tzanussi@gmail.com>
      Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
      e26207a3
    • T
      perf/scripts: Fix supported language listing option · f526d68b
      Tom Zanussi 提交于
      'perf trace -s list' prints a list of the supported scripting
      languages.  One problem with it is that it falls through and prints
      the trace as well.  The use of 'list' for this also makes it easy to
      confuse with 'perf trace -l', used for listing available scripts.  So
      change 'perf trace -s list' to 'perf trace -s lang' and fixes the
      fall-through problem.
      Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      LKML-Reference: <1264580883-15324-2-git-send-email-tzanussi@gmail.com>
      Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
      f526d68b
  3. 22 2月, 2010 2 次提交
  4. 08 2月, 2010 3 次提交
    • A
      perf record: Fix existing process callgraph symbol · f7e7ee36
      austin_zhang@linux.intel.com 提交于
      When 'perf record -g' a existing process, even with debuginfo
      packages, still cannnot get symbol from 'perf report'.
      
      try:
      
       perf record -g -p `pidof xxx` -f
       perf report
      
          68.26%    :1181           b74870f2  [.] 0x000000b74870f2
                    |
                    |--32.09%-- 0xb73b5b44
                    |          0xb7487102
                    |          0xb748a4e2
                    |          0xb748633d
                    |          0xb73b41cd
                    |          0xb73b4467
                    |          0xb747d531
      
      The reason is: for existing process, in __cmd_record(),
      the pid is 0 rather than the existing process id.
      Signed-off-by: NAustin Zhang <austin_zhang@linux.intel.com>
      Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      LKML-Reference: <4710.10.255.24.35.1265389362.squirrel@linux.intel.com>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      f7e7ee36
    • A
      perf top: Use address pattern in lookup_sym_source · 5f485364
      Arnaldo Carvalho de Melo 提交于
      Because we may have aliases, like __GI___strcoll_l in
      /lib64/libc-2.10.2.so that appears in objdump as:
      
      $ objdump --start-address=0x0000003715a86420 \
                 --stop-address=0x0000003715a872dc -dS /lib64/libc-2.10.2.so
      
      0000003715a86420 <__strcoll_l>:
        3715a86420:	55                   	push   %rbp
        3715a86421:	48 89 e5             	mov    %rsp,%rbp
        3715a86424:	41 57                	push   %r15
      [root@doppio linux-2.6-tip]#
      
      So look for the address exactly at the start of the line instead
      so that annotation can work for in these cases.
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Kirill Smelkov <kirr@landau.phys.spbu.ru>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1265550376-12665-2-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      5f485364
    • K
      perf top: Fix annotate for userspace · ee11b90b
      Kirill Smelkov 提交于
      First, for programs and prelinked libraries, annotate code was
      fooled by objdump output IPs (src->eip in the code) being
      wrongly converted to absolute IPs. In such case there were no
      conversion needed, but in
      
         src->eip = strtoull(src->line, NULL, 16);
         src->eip = map->unmap_ip(map, src->eip); // = eip + map->start - map->pgoff
      
      we were reading absolute address from objdump (e.g. 8048604) and
      then almost doubling it, because eip & map->start are
      approximately close for small programs.
      
      Needless to say, that later, in record_precise_ip() there was no
      matching with real runtime IPs.
      
      And second, like with `perf annotate` the problem with
      non-prelinked *.so was that we were doing rip -> objdump address
      conversion wrong.
      
      Also, because unlike `perf annotate`, `perf top` code does
      annotation based on absolute IPs for performance reasons(*), new
      helper for mapping objdump addresse to IP is introduced.
      
      (*) we get samples info in absolute IPs, and since we do lots of
          hit-testing on absolute IPs at runtime in record_precise_ip(), it's
          better to convert objdump addresses to IPs once and do no conversion
          at runtime.
      
      I also had to fix how objdump output is parsed (with hardcoded
      8/16 characters format, which was inappropriate for ET_DYN dsos
      with small addresses like '4ac')
      
      Also note, that not all objdump output lines has associtated
      IPs, e.g. look at source lines here:
      
          000004ac <my_strlen>:
          extern "C"
          int my_strlen(const char *s)
           4ac:   55                      push   %ebp
           4ad:   89 e5                   mov    %esp,%ebp
           4af:   83 ec 10                sub    $0x10,%esp
          {
              int len = 0;
           4b2:   c7 45 fc 00 00 00 00    movl   $0x0,-0x4(%ebp)
           4b9:   eb 08                   jmp    4c3 <my_strlen+0x17>
      
              while (*s) {
                  ++len;
           4bb:   83 45 fc 01             addl   $0x1,-0x4(%ebp)
                  ++s;
           4bf:   83 45 08 01             addl   $0x1,0x8(%ebp)
      
      So we mark them with eip=0, and ignore such lines in annotate
      lookup code.
      Signed-off-by: NKirill Smelkov <kirr@landau.phys.spbu.ru>
      [ Note: one hunk of this patch was applied by Mike in 57d81889 ]
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Mike Galbraith <efault@gmx.de>
      LKML-Reference: <1265550376-12665-1-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      ee11b90b
  5. 04 2月, 2010 12 次提交
    • I
      perf tools: Fix session init on non-modular kernels · 2161db96
      Ingo Molnar 提交于
      perf top and perf record refuses to initialize on non-modular kernels:
      refuse to initialize:
      
       $ perf top -v
        map_groups__set_modules_path_dir: cannot open /lib/modules/2.6.33-rc6-tip-00586-g398dde3-dirty/
      
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1265223128-11786-1-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      2161db96
    • X
      perf tools: Clean up O_LARGEFILE et al usage · f887f301
      Xiao Guangrong 提交于
      Setting _FILE_OFFSET_BITS and using O_LARGEFILE, lseek64, etc,
      is redundant. Thanks H. Peter Anvin for pointing it out.
      
      So, this patch removes O_LARGEFILE, lseek64, etc.
      Suggested-by: N"H. Peter Anvin" <hpa@zytor.com>
      Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      LKML-Reference: <4B6A8972.3070605@cn.fujitsu.com>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      f887f301
    • M
      perf annotate: Fix perf top module symbol annotation · 57d81889
      Mike Galbraith 提交于
      Signed-off-by: NMike Galbraith <efault@gmx.de>
      Cc: Kirill Smelkov <kirr@landau.phys.spbu.ru>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      LKML-Reference: <1265265106.6364.5.camel@marge.simson.net>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      57d81889
    • K
      perf top: Teach it to autolocate vmlinux · 6cff0e8d
      Kirill Smelkov 提交于
      By relying on logic in dso__load_kernel_sym(), we can
      automatically load vmlinux.
      
      The only thing which needs to be adjusted, is how --sym-annotate
      option is handled - now we can't rely on vmlinux been loaded
      until full successful pass of dso__load_vmlinux(), but that's
      not the case if we'll do sym_filter_entry setup in
      symbol_filter().
      
      So move this step right after event__process_sample() where we
      know the whole dso__load_kernel_sym() pass is done.
      
      By the way, though conceptually similar `perf top` still can't
      annotate userspace - see next patches with fixes.
      Signed-off-by: NKirill Smelkov <kirr@landau.phys.spbu.ru>
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Mike Galbraith <efault@gmx.de>
      LKML-Reference: <1265223128-11786-9-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      6cff0e8d
    • K
      perf annotate: Fix it for non-prelinked *.so · 7a2b6209
      Kirill Smelkov 提交于
      The problem was we were incorrectly calculating objdump
      addresses for sym->start and sym->end, look:
      
      For simple ET_DYN type DSO (*.so) with one function, objdump -dS
      output is something like this:
      
          000004ac <my_strlen>:
          int my_strlen(const char *s)
           4ac:   55                      push   %ebp
           4ad:   89 e5                   mov    %esp,%ebp
           4af:   83 ec 10                sub    $0x10,%esp
          {
      
      i.e. we have relative-to-dso-mapping IPs (=RIP) there.
      
      For ET_EXEC type and probably for prelinked libs as well (sorry
      can't test - I don't use prelink) objdump outputs absolute IPs,
      e.g.
      
          08048604 <zz_strlen>:
          extern "C"
          int zz_strlen(const char *s)
           8048604:       55                      push   %ebp
           8048605:       89 e5                   mov    %esp,%ebp
           8048607:       83 ec 10                sub    $0x10,%esp
          {
      
      So, if sym->start is always relative to dso mapping(*), we'll
      have to unmap it for ET_EXEC like cases, and leave as is for
      ET_DYN cases.
      
      (*) and it is - we've explicitely made it relative. Look for
          adjust_symbols handling in dso__load_sym()
      
      Previously we were always unmapping sym->start and for ET_DYN
      dsos resulting addresses were wrong, and so objdump output was
      empty.
      
      The end result was that perf annotate output for symbols from
      non-prelinked *.so had always 0.00% percents only, which is
      wrong.
      
      To fix it, let's introduce a helper for converting rip to
      objdump address, and also let's document what map_ip() and
      unmap_ip() do -- I had to study sources for several hours to
      understand it.
      Signed-off-by: NKirill Smelkov <kirr@landau.phys.spbu.ru>
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Mike Galbraith <efault@gmx.de>
      LKML-Reference: <1265223128-11786-8-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      7a2b6209
    • A
      perf tools: Adjust some verbosity levels · 29a9f66d
      Arnaldo Carvalho de Melo 提交于
      Not to pollute too much 'perf annotate' debugging sessions.
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1265223128-11786-7-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      29a9f66d
    • A
      perf record: Stop intercepting events, use postprocessing to get build-ids · 6122e4e4
      Arnaldo Carvalho de Melo 提交于
      We want to stream events as fast as possible to perf.data, and
      also in the future we want to have splice working, when no
      interception will be possible.
      
      Using build_id__mark_dso_hit_ops to create the list of DSOs that
      back MMAPs we also optimize disk usage in the build-id cache by
      only caching DSOs that had hits.
      Suggested-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1265223128-11786-6-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      6122e4e4
    • A
      perf build-id: Move the routine to find DSOs with hits to the lib · 7b2567c1
      Arnaldo Carvalho de Melo 提交于
      Because 'perf record' will have to find the build-ids in after
      we stop recording, so as to reduce even more the impact in the
      workload while we do the measurement.
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1265223128-11786-5-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      7b2567c1
    • A
      perf probe: Don't use a perf_session instance just to resolve symbols · 8ad94c60
      Arnaldo Carvalho de Melo 提交于
      With the recent modifications done to untie the session and
      symbol layers, 'perf probe' now can use just the symbols layer.
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Masami Hiramatsu <mhiramat@redhat.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      8ad94c60
    • A
      perf symbols: Ditch vdso global variable · 8d92c02a
      Arnaldo Carvalho de Melo 提交于
      We can check using strcmp, most DSOs don't start with '[' so the
      test is cheap enough and we had to test it there anyway since
      when reading perf.data files we weren't calling the routine that
      created this global variable and thus weren't setting it as
      "loaded", which was causing a bogus:
      
        Failed to open [vdso], continuing without symbols
      
      Message as the first line of 'perf report'.
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1265223128-11786-3-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      8d92c02a
    • A
      perf symbols: Fixup vsyscall maps · 6275ce2d
      Arnaldo Carvalho de Melo 提交于
      While debugging a problem reported by Pekka Enberg by printing
      the IP and all the maps for a thread when we don't find a map
      for an IP I noticed that dso__load_sym needs to fixup these
      extra maps it creates to hold symbols in different ELF sections
      than the main kernel one.
      
      Now we're back showing things like:
      
      [root@doppio linux-2.6-tip]# perf report | grep vsyscall
           0.02%             mutt  [kernel.kallsyms].vsyscall_fn  [.] vread_hpet
           0.01%            named  [kernel.kallsyms].vsyscall_fn  [.] vread_hpet
           0.01%   NetworkManager  [kernel.kallsyms].vsyscall_fn  [.] vread_hpet
           0.01%         gconfd-2  [kernel.kallsyms].vsyscall_0   [.] vgettimeofday
           0.01%  hald-addon-rfki  [kernel.kallsyms].vsyscall_fn  [.] vread_hpet
           0.00%      dbus-daemon  [kernel.kallsyms].vsyscall_fn  [.] vread_hpet
      [root@doppio linux-2.6-tip]#
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Pekka Enberg <penberg@cs.helsinki.fi>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1265223128-11786-2-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      6275ce2d
    • A
      perf symbols: Remove perf_session usage in symbols layer · 9de89fe7
      Arnaldo Carvalho de Melo 提交于
      I noticed while writing the first test in 'perf regtest' that to
      just test the symbol handling routines one needs to create a
      perf session, that is a layer centered on a perf.data file,
      events, etc, so I untied these layers.
      
      This reduces the complexity for the users as the number of
      parameters to most of the symbols and session APIs now was
      reduced while not adding more state to all the map instances by
      only having data that is needed to split the kernel (kallsyms
      and ELF symtab sections) maps and do vmlinux relocation on the
      main kernel map.
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1265223128-11786-1-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      9de89fe7
  6. 03 2月, 2010 1 次提交
    • X
      perf tools: Use O_LARGEFILE to open perf data file · b8f46c5a
      Xiao Guangrong 提交于
      Open perf data file with O_LARGEFILE flag since its size is
      easily larger that 2G.
      
      For example:
      
       # rm -rf perf.data
       # ./perf kmem record sleep 300
      
       [ perf record: Woken up 0 times to write data ]
       [ perf record: Captured and wrote 3142.147 MB perf.data
       (~137282513 samples) ]
      
       # ll -h perf.data
       -rw------- 1 root root 3.1G .....
      Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      LKML-Reference: <4B68F32A.9040203@cn.fujitsu.com>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      b8f46c5a
  7. 31 1月, 2010 5 次提交
    • I
      perf lock: Clean up various details · 59f411b6
      Ingo Molnar 提交于
      Fix up a few small stylistic details:
      
       - use consistent vertical spacing/alignment
       - remove line80 artifacts
       - group some global variables better
       - remove dead code
      
      Plus rename 'prof' to 'report' to make it more in line with other
      tools, and remove the line/file keying as we really want to use
      IPs like the other tools do.
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      LKML-Reference: <1264851813-8413-12-git-send-email-mitake@dcl.info.waseda.ac.jp>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      59f411b6
    • H
      perf lock: Introduce new tool "perf lock", for analyzing lock statistics · 9b5e350c
      Hitoshi Mitake 提交于
      Adding new subcommand "perf lock" to perf.
      
      I have a lot of remaining ToDos, but for now perf lock can
      already provide minimal functionality for analyzing lock
      statistics.
      Signed-off-by: NHitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      LKML-Reference: <1264851813-8413-12-git-send-email-mitake@dcl.info.waseda.ac.jp>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      9b5e350c
    • H
      perf: Add util/include/linuxhash.h to include hash.h of kernel · 18e97e06
      Hitoshi Mitake 提交于
      linux/hash.h, hash header of kernel, is also useful for perf.
      
      util/include/linuxhash.h includes linux/hash.h, so we can use
      hash facilities (e.g. hash_long()) in perf now.
      Signed-off-by: NHitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      LKML-Reference: <1264851813-8413-3-git-send-email-mitake@dcl.info.waseda.ac.jp>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      18e97e06
    • H
      perf tools: Add __data_loc support · 86d8d296
      Hitoshi Mitake 提交于
      This patch is required to test the next patch for perf lock.
      
      At 064739bc ,
      support for the modifier "__data_loc" of format is added.
      
      But, when I wanted to parse format of lock_acquired (or some
      event else), raw_field_ptr() did not returned correct pointer.
      
      So I modified raw_field_ptr() like this patch. Then
      raw_field_ptr() works well.
      Signed-off-by: NHitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
      Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Tom Zanussi <tzanussi@gmail.com>
      Cc: Steven Rostedt <srostedt@redhat.com>
      LKML-Reference: <1264851813-8413-2-git-send-email-mitake@dcl.info.waseda.ac.jp>
      [ v3: fixed minor stylistic detail ]
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      86d8d296
    • H
      Revert "perf record: Intercept all events" · a8e6f734
      Hitoshi Mitake 提交于
      This reverts commit f5a2c3dc.
      
      This patch is required for making "perf lock rec" work.
      The commit f5a2c3dc changes write_event() of builtin-record.c
      . And changed write_event() sometimes doesn't stop with perf
      lock rec.
      
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      LKML-Reference: <new-submission>
      [ that commit also causes perf record to not be Ctrl-C-able,
        and it's concetually wrong to parse the data at record time
        (unconditionally - even when not needed), as we eventually
        want to be able to do zero-copy recording, at least for
        non-archive recordings.  ]
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      a8e6f734
  8. 29 1月, 2010 6 次提交
  9. 27 1月, 2010 2 次提交