If the session has an error, then we want to start by recovering the
session, as any SEQUENCE we send is going to fail with a session
error.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

It now has only one field and is only used in one structure.
So replaced it in that structure by the field it contains.
Signed-off-by: NNeilBrown <neilb@suse.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

A process can have two possible lock owner for a given open file:
a per-process Posix lock owner and a per-open-file flock owner
Use both of these when searching for a suitable stateid to use.

With this patch, READ/WRITE requests will use the correct stateid
if a flock lock is active.
Signed-off-by: NNeilBrown <neilb@suse.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The only time that a lock_context is not immediately available is in
setattr, and now that it has an open_context, it can easily find one
with nfs_get_lock_context.
This removes the need for the on-stack nfs_lockowner.

This change is preparation for correctly support flock stateids.
Signed-off-by: NNeilBrown <neilb@suse.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Now that we're doing TEST_STATEID in nfs4_reclaim_open_state(), we can have
a NFS4ERR_OLD_STATEID returned from nfs41_open_expired() .  Instead of
marking state recovery as failed, mark the state for recovery again.
Signed-off-by: NBenjamin Coddington <bcodding@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Tested-by: NOleg Drokin <green@linuxhacker.ru>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

If the file permissions change on the server, then we may not be able to
recover open state. If so, we need to ensure that we mark the file
descriptor appropriately.

Cc: stable@vger.kernel.org
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Tested-by: NOleg Drokin <green@linuxhacker.ru>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Modify the helper nfs_inode_find_state_and_recover() so that it
can check all open/lock/delegation state trackers on that inode for
whether or not they need are affected by a revoked stateid error.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Tested-by: NOleg Drokin <green@linuxhacker.ru>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

According to RFC5661, if any of the SEQUENCE status bits
SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED,
SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED, SEQ4_STATUS_ADMIN_STATE_REVOKED,
or SEQ4_STATUS_RECALLABLE_STATE_REVOKED are set, then we need to use
TEST_STATEID to figure out which stateids have been revoked, so we
can acknowledge the loss of state using FREE_STATEID.

While we already do this for open and lock state, we have not been doing
so for all the delegations.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Tested-by: NOleg Drokin <green@linuxhacker.ru>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

As described in RFC5661, section 18.46, some of the status flags exist
in order to tell the client when it needs to acknowledge the existence of
revoked state on the server and/or to recover state.
Those flags will then remain set until the recovery procedure is done.

In order to avoid looping, the client therefore needs to ignore
those particular flags while recovering.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Tested-by: NOleg Drokin <green@linuxhacker.ru>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Make a helper function nfs4_set_lease_period() and have
nfs41_setup_state_renewal() and nfs4_do_fsinfo() use it.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Commit e8d975e7 ("fixing infinite OPEN loop in 4.0 stateid recovery")
introduced access to state after it was just potentially freed by
nfs4_put_open_state leading to a random data corruption somewhere.

BUG: unable to handle kernel paging request at ffff88004941ee40
IP: [<ffffffff813baf01>] nfs4_do_reclaim+0x461/0x740
PGD 3501067 PUD 3504067 PMD 6ff37067 PTE 800000004941e060
Oops: 0002 [#1] SMP DEBUG_PAGEALLOC
Modules linked in: loop rpcsec_gss_krb5 acpi_cpufreq tpm_tis joydev i2c_piix4 pcspkr tpm virtio_console nfsd ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops floppy serio_raw virtio_blk drm
CPU: 6 PID: 2161 Comm: 192.168.10.253- Not tainted 4.7.0-rc1-vm-nfs+ #112
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
task: ffff8800463dcd00 ti: ffff88003ff48000 task.ti: ffff88003ff48000
RIP: 0010:[<ffffffff813baf01>]  [<ffffffff813baf01>] nfs4_do_reclaim+0x461/0x740
RSP: 0018:ffff88003ff4bd68  EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffffff81a49900 RCX: 00000000000000e8
RDX: 00000000000000e8 RSI: ffff8800418b9930 RDI: ffff880040c96c88
RBP: ffff88003ff4bdf8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff880040c96c98
R13: ffff88004941ee20 R14: ffff88004941ee40 R15: ffff88004941ee00
FS:  0000000000000000(0000) GS:ffff88006d000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff88004941ee40 CR3: 0000000060b0b000 CR4: 00000000000006e0
Stack:
 ffffffff813baad5 ffff8800463dcd00 ffff880000000001 ffffffff810e6b68
 ffff880043ddbc88 ffff8800418b9800 ffff8800418b98c8 ffff88004941ee48
 ffff880040c96c90 ffff880040c96c00 ffff880040c96c20 ffff880040c96c40
Call Trace:
 [<ffffffff813baad5>] ? nfs4_do_reclaim+0x35/0x740
 [<ffffffff810e6b68>] ? trace_hardirqs_on_caller+0x128/0x1b0
 [<ffffffff813bb7cd>] nfs4_run_state_manager+0x5ed/0xa40
 [<ffffffff813bb1e0>] ? nfs4_do_reclaim+0x740/0x740
 [<ffffffff813bb1e0>] ? nfs4_do_reclaim+0x740/0x740
 [<ffffffff810af0d1>] kthread+0x101/0x120
 [<ffffffff810e6b68>] ? trace_hardirqs_on_caller+0x128/0x1b0
 [<ffffffff818843af>] ret_from_fork+0x1f/0x40
 [<ffffffff810aefd0>] ? kthread_create_on_node+0x250/0x250
Code: 65 80 4c 8b b5 78 ff ff ff e8 fc 88 4c 00 48 8b 7d 88 e8 13 67 d2 ff 49 8b 47 40 a8 02 0f 84 d3 01 00 00 4c 89 ff e8 7f f9 ff ff <f0> 41 80 26 7f 48 8b 7d c8 e8 b1 84 4c 00 e9 39 fd ff ff 3d e6
RIP  [<ffffffff813baf01>] nfs4_do_reclaim+0x461/0x740
 RSP <ffff88003ff4bd68>
CR2: ffff88004941ee40
Signed-off-by: NOleg Drokin <green@linuxhacker.ru>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Older versions of gcc don't understand named initializers inside a
anonymous structure or union member.  It can be worked around by adding
the bracin gin the initializer for the anonymous member.

Without this, gcc 4.4.4 will fail the build with

    CC      fs/nfs/nfs4state.o
  fs/nfs/nfs4state.c:69: error: unknown field ‘data’ specified in initializer
  fs/nfs/nfs4state.c:69: warning: missing braces around initializer
  fs/nfs/nfs4state.c:69: warning: (near initialization for ‘zero_stateid.<anonymous>.data’)
  make[2]: *** [fs/nfs/nfs4state.o] Error 1

introduced in commit 93b717fd ("NFSv4: Label stateids with the type")
Reported-and-tested-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Anna Schumaker <Anna.Schumaker@netapp.com>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When we're using a delegation to represent our open state, we should
ensure that we use the stateid that was used to create that delegation.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

In order to more easily distinguish what kind of stateid we are dealing
with, introduce a type that can be used to label the stateid structure.

The label will be useful both for debugging, but also when dealing with
operations like SETATTR, READ and WRITE that can take several different
types of stateid as arguments.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Currently, we don't test if the state owner is in use before we try to
recover it. The problem is that if the refcount is zero, then the
state owner will be waiting on the lru list for garbage collection.
The expectation in that case is that if you bump the refcount, then
you must also remove the state owner from the lru list. Otherwise
the call to nfs4_put_state_owner will corrupt that list by trying
to add our state owner a second time.

Avoid the whole problem by just skipping state owners that hold no
state.
Reported-by: NAndrew W Elble <aweits@rit.edu>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

A test case is as the description says:
open(foobar, O_WRONLY);
sleep()  --> reboot the server
close(foobar)

The bug is because in nfs4state.c in nfs4_reclaim_open_state() a few
line before going to restart, there is
clear_bit(NFS4CLNT_RECLAIM_NOGRACE, &state->flags).

NFS4CLNT_RECLAIM_NOGRACE is a flag for the client states not open
owner states. Value of NFS4CLNT_RECLAIM_NOGRACE is 4 which is the
value of NFS_O_WRONLY_STATE in nfs4_state->flags. So clearing it wipes
out state and when we go to close it, “call_close” doesn’t get set as
state flag is not set and CLOSE doesn’t go on the wire.
Signed-off-by: NOlga Kornievskaia <aglo@umich.edu>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

All these functions do is call nfs41_ping_server() without adding
anything.  Let's remove them and give nfs41_ping_server() a better name
instead.
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

RFC5661 states:

      The server has encountered an unrecoverable fault with the
      backchannel (e.g., it has lost track of the sequence ID for a slot
      in the backchannel).  The client MUST stop sending more requests
      on the session's fore channel, wait for all outstanding requests
      to complete on the fore and back channel, and then destroy the
      session.

Ensure we do so...
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Try to handle this for now by invalidating all outstanding layouts for this
server and then testing all the open+lock+delegation stateids.
At some later stage, we may want to optimise by separating out the testing of
delegation stateids only, and adding testing of layout stateids.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If the server tells us that only some state has been revoked, then we
need to run the full TEST_STATEID dog and pony show in order to discover
which locks and delegations are still OK. Currently we blow away all
state, which means that we lose all locks!
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

While the NFSv4.1 code has always drained the slot tables in order to stop
non-recovery related RPC calls when doing lease recovery, the NFSv4 code
did not.
The reason for the difference in behaviour is that NFSv4 does not have
session state, and so RPC calls can in theory proceed while recovery is
happening. In practice, however, anything I/O or state related needs to
wait until recovery is over.

This patch changes the behaviour of NFSv4 to match that of NFSv4.1 so that
we can simplify the state recovery code by assuming that we do not have to
deal with races between recovery and ordinary I/O.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Problem: When an operation like WRITE receives a BAD_STATEID, even though
recovery code clears the RECLAIM_NOGRACE recovery flag before recovering
the open state, because of clearing delegation state for the associated
inode, nfs_inode_find_state_and_recover() gets called and it makes the
same state with RECLAIM_NOGRACE flag again. As a results, when we restart
looking over the open states, we end up in the infinite loop instead of
breaking out in the next test of state flags.

Solution: unset the RECLAIM_NOGRACE set because of
calling of nfs_inode_find_state_and_recover() after returning from calling
recover_open() function.
Signed-off-by: NOlga Kornievskaia <kolga@netapp.com>
Cc: stable@vger.kernel.org
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

This file is only used internally to the NFS v4 module, so it doesn't
need to be in the global include path.  I also renamed it from
nfs_idmap.h to nfs4idmap.h to emphasize that it's an NFSv4-only include
file.
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

If the call to exchange-id returns with the EXCHGID4_FLAG_CONFIRMED_R flag
set, then that means our lease was established by a previous mount instance.
Ensure that we detect this situation, and that we clear the state held by
that mount.
Reported-by: NJorge Mora <Jorge.Mora@netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

We do not want to allow a race with another NFS mount to cause
nfs41_walk_client_list() to establish a lease on our nfs_client before
we're done checking for trunking.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

When we relax the sequencing on the NFSv4.1 OPEN/CLOSE code, we will want
to use the value NULL to indicate that no sequencing is needed.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

We can now add a dedicated spinlock without expanding struct inode.
Change to using that to protect the various i_flctx lists.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Acked-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Acked-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Acked-by: NChristoph Hellwig <hch@lst.de>

The current open/lock state recovery unfortunately does not handle errors
such as NFS4ERR_CONN_NOT_BOUND_TO_SESSION correctly. Instead of looping,
just proceeds as if the state manager is finished recovering.
This patch ensures that we loop back, handle higher priority errors
and complete the open/lock state recovery.

Cc: stable@vger.kernel.org
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If a NFSv4.x server returns NFS4ERR_STALE_CLIENTID in response to a
CREATE_SESSION or SETCLIENTID_CONFIRM in order to tell us that it rebooted
a second time, then the client will currently take this to mean that it must
declare all locks to be stale, and hence ineligible for reboot recovery.

RFC3530 and RFC5661 both suggest that the client should instead rely on the
server to respond to inelegible open share, lock and delegation reclaim
requests with NFS4ERR_NO_GRACE in this situation.

Cc: stable@vger.kernel.org
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Commit c9fdeb28 removed a 'continue' after checking if the lease needs
to be renewed. However, if client hasn't moved, the code falls down to
starting reboot recovery erroneously (ie., sends open reclaim and gets
back stale_clientid error) before recovering from getting stale_clientid
on the renew operation.
Signed-off-by: NOlga Kornievskaia <kolga@netapp.com>
Fixes: c9fdeb28 (NFS: Add basic migration support to state manager thread)
Cc: stable@vger.kernel.org # 3.13+
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

This reverts commit 49a4bda2.

Christoph reported an oops due to the above commit:

generic/089 242s ...[ 2187.041239] general protection fault: 0000 [#1]
SMP
[ 2187.042899] Modules linked in:
[ 2187.044000] CPU: 0 PID: 11913 Comm: kworker/0:1 Not tainted 3.16.0-rc6+ #1151
[ 2187.044287] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[ 2187.044287] Workqueue: nfsiod free_lock_state_work
[ 2187.044287] task: ffff880072b50cd0 ti: ffff88007a4ec000 task.ti: ffff88007a4ec000
[ 2187.044287] RIP: 0010:[<ffffffff81361ca6>]  [<ffffffff81361ca6>] free_lock_state_work+0x16/0x30
[ 2187.044287] RSP: 0018:ffff88007a4efd58  EFLAGS: 00010296
[ 2187.044287] RAX: 6b6b6b6b6b6b6b6b RBX: ffff88007a947ac0 RCX: 8000000000000000
[ 2187.044287] RDX: ffffffff826af9e0 RSI: ffff88007b093c00 RDI: ffff88007b093db8
[ 2187.044287] RBP: ffff88007a4efd58 R08: ffffffff832d3e10 R09: 000001c40efc0000
[ 2187.044287] R10: 0000000000000000 R11: 0000000000059e30 R12: ffff88007fc13240
[ 2187.044287] R13: ffff88007fc18b00 R14: ffff88007b093db8 R15: 0000000000000000
[ 2187.044287] FS:  0000000000000000(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
[ 2187.044287] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 2187.044287] CR2: 00007f93ec33fb80 CR3: 0000000079dc2000 CR4: 00000000000006f0
[ 2187.044287] Stack:
[ 2187.044287]  ffff88007a4efdd8 ffffffff810cc877 ffffffff810cc80d ffff88007fc13258
[ 2187.044287]  000000007a947af0 0000000000000000 ffffffff8353ccc8 ffffffff82b6f3d0
[ 2187.044287]  0000000000000000 ffffffff82267679 ffff88007a4efdd8 ffff88007fc13240
[ 2187.044287] Call Trace:
[ 2187.044287]  [<ffffffff810cc877>] process_one_work+0x1c7/0x490
[ 2187.044287]  [<ffffffff810cc80d>] ? process_one_work+0x15d/0x490
[ 2187.044287]  [<ffffffff810cd569>] worker_thread+0x119/0x4f0
[ 2187.044287]  [<ffffffff810fbbad>] ? trace_hardirqs_on+0xd/0x10
[ 2187.044287]  [<ffffffff810cd450>] ? init_pwq+0x190/0x190
[ 2187.044287]  [<ffffffff810d3c6f>] kthread+0xdf/0x100
[ 2187.044287]  [<ffffffff810d3b90>] ? __init_kthread_worker+0x70/0x70
[ 2187.044287]  [<ffffffff81d9873c>] ret_from_fork+0x7c/0xb0
[ 2187.044287]  [<ffffffff810d3b90>] ? __init_kthread_worker+0x70/0x70
[ 2187.044287] Code: 0f 1f 44 00 00 31 c0 5d c3 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 8d b7 48 fe ff ff 48 8b 87 58 fe ff ff 48 89 e5 48 8b 40 30 <48> 8b 00 48 8b 10 48 89 c7 48 8b 92 90 03 00 00 ff 52 28 5d c3
[ 2187.044287] RIP  [<ffffffff81361ca6>] free_lock_state_work+0x16/0x30
[ 2187.044287]  RSP <ffff88007a4efd58>
[ 2187.103626] ---[ end trace 0f11326d28e5d8fa ]---

The original reason for this patch was because the fl_release_private
operation couldn't sleep. With commit ed9814d8 (locks: defer freeing
locks in locks_delete_lock until after i_lock has been dropped), this is
no longer a problem so we can revert this patch.
Reported-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The current "wait_on_bit" interface requires an 'action'
function to be provided which does the actual waiting.
There are over 20 such functions, many of them identical.
Most cases can be satisfied by one of just two functions, one
which uses io_schedule() and one which just uses schedule().

So:
 Rename wait_on_bit and        wait_on_bit_lock to
        wait_on_bit_action and wait_on_bit_lock_action
 to make it explicit that they need an action function.

 Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io
 which are *not* given an action function but implicitly use
 a standard one.
 The decision to error-out if a signal is pending is now made
 based on the 'mode' argument rather than being encoded in the action
 function.

 All instances of the old wait_on_bit and wait_on_bit_lock which
 can use the new version have been changed accordingly and their
 action functions have been discarded.
 wait_on_bit{_lock} does not return any specific error code in the
 event of a signal so the caller must check for non-zero and
 interpolate their own error code as appropriate.

The wait_on_bit() call in __fscache_wait_on_invalidate() was
ambiguous as it specified TASK_UNINTERRUPTIBLE but used
fscache_wait_bit_interruptible as an action function.
David Howells confirms this should be uniformly
"uninterruptible"

The main remaining user of wait_on_bit{,_lock}_action is NFS
which needs to use a freezer-aware schedule() call.

A comment in fs/gfs2/glock.c notes that having multiple 'action'
functions is useful as they display differently in the 'wchan'
field of 'ps'. (and /proc/$PID/wchan).
As the new bit_wait{,_io} functions are tagged "__sched", they
will not show up at all, but something higher in the stack.  So
the distinction will still be visible, only with different
function names (gds2_glock_wait versus gfs2_glock_dq_wait in the
gfs2/glock.c case).

Since first version of this patch (against 3.15) two new action
functions appeared, on in NFS and one in CIFS.  CIFS also now
uses an action function that makes the same freezer aware
schedule call as NFS.
Signed-off-by: NNeilBrown <neilb@suse.de>
Acked-by: David Howells <dhowells@redhat.com> (fscache, keys)
Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2)
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steve French <sfrench@samba.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brownSigned-off-by: NIngo Molnar <mingo@kernel.org>

We got a report of the following warning in Fedora:

BUG: sleeping function called from invalid context at mm/slub.c:969
in_atomic(): 1, irqs_disabled(): 0, pid: 533, name: bash
3 locks held by bash/533:
 #0:  (&sp->so_delegreturn_mutex){+.+...}, at: [<ffffffffa033da62>] nfs4_proc_lock+0x262/0x910 [nfsv4]
 #1:  (&nfsi->rwsem){.+.+.+}, at: [<ffffffffa033da6a>] nfs4_proc_lock+0x26a/0x910 [nfsv4]
 #2:  (&sb->s_type->i_lock_key#23){+.+...}, at: [<ffffffff812998dc>] flock_lock_file_wait+0x8c/0x3a0
CPU: 0 PID: 533 Comm: bash Not tainted 3.15.0-0.rc1.git1.1.fc21.x86_64 #1
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
 0000000000000000 00000000d664ff3c ffff880078b69a70 ffffffff817e82e0
 0000000000000000 ffff880078b69a98 ffffffff810cf1a4 0000000000000050
 0000000000000050 ffff88007cc01a00 ffff880078b69ad8 ffffffff8121449e
Call Trace:
 [<ffffffff817e82e0>] dump_stack+0x4d/0x66
 [<ffffffff810cf1a4>] __might_sleep+0x184/0x240
 [<ffffffff8121449e>] kmem_cache_alloc_trace+0x4e/0x330
 [<ffffffffa0331124>] ? nfs4_release_lockowner+0x74/0x110 [nfsv4]
 [<ffffffffa0331124>] nfs4_release_lockowner+0x74/0x110 [nfsv4]
 [<ffffffffa0352340>] nfs4_put_lock_state+0x90/0xb0 [nfsv4]
 [<ffffffffa0352375>] nfs4_fl_release_lock+0x15/0x20 [nfsv4]
 [<ffffffff81297515>] locks_free_lock+0x45/0x90
 [<ffffffff8129996c>] flock_lock_file_wait+0x11c/0x3a0
 [<ffffffffa033da6a>] ? nfs4_proc_lock+0x26a/0x910 [nfsv4]
 [<ffffffffa033301e>] do_vfs_lock+0x1e/0x30 [nfsv4]
 [<ffffffffa033da79>] nfs4_proc_lock+0x279/0x910 [nfsv4]
 [<ffffffff810dbb26>] ? local_clock+0x16/0x30
 [<ffffffff810f5a3f>] ? lock_release_holdtime.part.28+0xf/0x200
 [<ffffffffa02f820c>] do_unlk+0x8c/0xc0 [nfs]
 [<ffffffffa02f85c5>] nfs_flock+0xa5/0xf0 [nfs]
 [<ffffffff8129a6f6>] locks_remove_file+0xb6/0x1e0
 [<ffffffff812159d8>] ? kfree+0xd8/0x2d0
 [<ffffffff8123bc63>] __fput+0xd3/0x210
 [<ffffffff8123bdee>] ____fput+0xe/0x10
 [<ffffffff810bfb6d>] task_work_run+0xcd/0xf0
 [<ffffffff81019cd1>] do_notify_resume+0x61/0x90
 [<ffffffff817fbea2>] int_signal+0x12/0x17

The problem is that NFSv4 is trying to do an allocation from
fl_release_private (in order to send a RELEASE_LOCKOWNER call). That
function can be called while holding the inode->i_lock, and it's
currently set up to do __GFP_WAIT allocations. v4.1 code has a
similar problem.

This patch adds a work_struct to the nfs4_lock_state and has the code
queue the free_lock_state operation to nfsiod.
Reported-by: NJosh Stone <jistone@redhat.com>
Signed-off-by: NJeff Layton <jlayton@poochiereds.net>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Do the following set of ops with a file on a NFSv4 mount:

    exec 3>>/file/on/nfsv4
    flock -x 3
    exec 3>&-

You'll see the LOCK request go across the wire, but no LOCKU when the
file is closed.

What happens is that the fd is passed across a fork, and the final close
is done in a different process than the opener. That makes
__nfs4_find_lock_state miss finding the correct lock state because it
uses the fl_pid as a search key. A new one is created, and the locking
code treats it as a delegation stateid (because NFS_LOCK_INITIALIZED
isn't set).

The root cause of this breakage seems to be commit 77041ed9
(NFSv4: Ensure the lockowners are labelled using the fl_owner and/or
fl_pid).

That changed it so that flock lockowners are allocated based on the
fl_pid. I think this is incorrect. flock locks should be "owned" by the
struct file, and that is already accounted for in the fl_owner field of
the lock request when it comes through nfs_flock.

This patch basically reverts the above commit and with it, a LOCKU is
sent in the above reproducer.
Signed-off-by: NJeff Layton <jlayton@poochiereds.net>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The addition of lockdep code to write_seqcount_begin/end has lead to
a bunch of false positive claims of ABBA deadlocks with the so_lock
spinlock. Audits show that this simply cannot happen because the
read side code does not spin while holding so_lock.

Cc: <stable@vger.kernel.org> # 3.13.x
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>