- 27 1月, 2009 1 次提交
-
-
由 Jean Delvare 提交于
Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
-
- 09 11月, 2008 1 次提交
-
-
由 Kumar Gala 提交于
unset CONFIG_PCI_LEGACY in the defconfigs as none of them enable ISDN drivers which seem to be the only place we are using pci_find_device Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 21 8月, 2008 1 次提交
-
-
由 Kumar Gala 提交于
Since we are updated defconfigs I went ahead and moved the asp8347_defconfig under 83xx/ and the mpc8536_ds_defconfig under 85xx/ as that is where they should have been to start with. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 17 7月, 2008 1 次提交
-
-
由 Timur Tabi 提交于
The defconfigs for Freescale 85xx and 86xx SOCs had bad choices for some audio related options. In particular, OSS emulation should be enabled, and the old ALSA API should be disabled. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 09 6月, 2008 1 次提交
-
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 01 4月, 2008 1 次提交
-
-
由 Kumar Gala 提交于
The new rtc subsystem conflicts with genrtc so don't enable GENRTC if RTCLIB is enabled. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 24 3月, 2008 1 次提交
-
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 29 1月, 2008 1 次提交
-
-
由 Kumar Gala 提交于
* Allow multiple boards to be selected in a single build * Removed Kconfig option '85xx' which existed only for compat with arch/ppc * Added a multiplatform 85xx defconfig (mpc85xx_defconfig). This builds all 85xx boards except sbc8560 and stx_gp3 since these to boards have board specific ifdef in driver code that may break all other boards Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 06 12月, 2007 1 次提交
-
-
由 Paul Mackerras 提交于
This updates all the defconfigs in arch/powerpc/configs except iseries and ps3, which were updated by the preceding commits. This mostly takes the defaults, except that I turned on tickless idle and high-resolution timers for everything, and turned off instrumentation support and "Fair group CPU scheduler" for the smaller/embedded platforms. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 17 10月, 2007 1 次提交
-
-
由 Anton Blanchard 提交于
When checking out the new NO_HZ support in powerpc, I noticed we never slept for more than 2 seconds. It turns out SLAB has a 2 second per cpu timer that causes this. After switching to SLUB I see some nice 4 second sleeps which is the limit on this POWER6 box (the decrementer ticks at 512MHz): slept 4.19 sec slept 4.19 sec slept 4.19 sec slept 4.19 sec slept 3.96 sec slept 3.80 sec slept 2.99 sec Since SLUB is now the default and some powerpc defconfigs already enable it, lets enable SLUB across the board for consistency. While doing this I also noticed that the maple defconfig has SLAB debugging enabled which is sure to make your box nice and slow. Fix that too. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 14 9月, 2007 1 次提交
-
-
由 Kumar Gala 提交于
Renamed the mpc8544_ds.c board code to mpc85xx_ds.c to make it more generic in prep for other boards based on the same platform. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 30 8月, 2007 1 次提交
-
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 24 7月, 2007 1 次提交
-
-
由 Roy Zang 提交于
Add basic support for the PCIe PHB and enable the ULI bridge. Signed-off-by: NYork Sun <yorksun@freescale.com> Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 02 7月, 2007 1 次提交
-
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 30 3月, 2007 1 次提交
-
-
由 Jon Loeliger 提交于
Signed-off-by: NXianghua Xiao <x.xiao@freescale.com> Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com> Signed-off-by: NYork Sun <yorksun@freescale.com> Signed-off-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 18 2月, 2007 1 次提交
-
-
由 Kumar Gala 提交于
Renamed the MPC8568 MDS platform code to follow other 85xx boards. There isn't anything specific about the 8568 MDS code that wouldn't apply to another 85xx MDS system at this point. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 14 2月, 2007 1 次提交
-
-
由 Andy Fleming 提交于
Add defconfig for the MPC8568 MDS reference board Signed-off-by: NAndrew Fleming <afleming@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 10 2月, 2007 1 次提交
-
-
由 Kumar Gala 提交于
The MPC834x SYS board has always been called the MPC834x MDS since its public release. Removed all references to SYS and replaced with MDS. Additionally renamed the .dts to match the defconfig (mpc834x_mds*). Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 26 1月, 2007 1 次提交
-
-
由 Kumar Gala 提交于
Updated MATH_EMULATION depends to be on PPC_MPC832x instead of PPC_83xx. Only the the MPC832x has no floating point unit in the core. Updated the other 83xx defconfigs that got math emulation turned on incorrectly. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 22 1月, 2007 1 次提交
-
-
由 Paul Mackerras 提交于
Mostly took the defaults, except tried to get the netfilter options more or less as they were before. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 10 9月, 2006 1 次提交
-
-
由 Paul Mackerras 提交于
Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 30 8月, 2006 1 次提交
-
-
由 Kim Phillips 提交于
This fixes MPC834x MDS (formerly SYS) and ITX platform code to get IRQ data (including PCI) from the device tree, and to use the new IPIC code. renamed defconfig (sys -> mds), left one redundant NULL assignment in mpc83xx_pcibios_fixup to keep the compiler happy. Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 16 3月, 2006 1 次提交
-
-
由 Paul Mackerras 提交于
Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 14 1月, 2006 1 次提交
-
-
由 Kumar Gala 提交于
Add the first MPC83xx board that uses a flat device tree to arch/powerpc. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 09 11月, 2005 1 次提交
-
-
由 Kumar Gala 提交于
MPC834x uses the gianfar network driver which now uses the new phylib. We need to update the platform code to create a gianfar platform MDIO bus and pass the right intializations to the gianfar driver to make things work again. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-