- 19 2月, 2008 40 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-genirq由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-genirq: genirq: do not leave interupts enabled on free_irq genirq: spurious.c: use time_* macros
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Add regs_return_value(). [SPARC64]: Kill pcic_present(). [SPARC]: Kill 'prom_palette'. [ATYFB]: Kill 'prom_palette' sparc code. [SPARC64]: Kill 'prom_keyboard'. [SPARC]: Kill extern decl of 'panic_setup'. [SPARC64]: Delete 'boot_flags'. [SPARC64]: Kill unused function 'kernel_enter_debugger'. [SPARC64] arch/sparc64/kernel/unaligned.c: Use time_* macros [SPARC64]: Always register a PROM based early console. [SPARC64]: Update defconfig. [SPARC64]: Add -mtune=ultrasparc3 if possible. [SPARC64]: Remove Makefile code for ancient gcc and binutils. [SPARC64]: Remove DEBUG_BOOTMEM. [SPARC64]: Use shorter "get_zeroed_page" call. [SPARC]: Use shorter form of "get_zeroed_page". [SPARC]: video/cg14.c and video/sbuslib.c build fixes
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (60 commits) [NIU]: Bump driver version and release date. [NIU]: Fix BMAC alternate MAC address indexing. net: fix kernel-doc warnings in header files [IPV6]: Use BUG_ON instead of if + BUG in fib6_del_route. [IPV6]: dst_entry leak in ip4ip6_err. (resend) bluetooth: do not move child device other than rfcomm bluetooth: put hci dev after del conn [NET]: Elminate spurious print_mac() calls. [BLUETOOTH] hci_sysfs.c: Kill build warning. [NET]: Remove MAC_FMT net/8021q/vlan_dev.c: Use print_mac. [XFRM]: Fix ordering issue in xfrm_dst_hash_transfer(). [BLUETOOTH] net/bluetooth/hci_core.c: Use time_* macros [IPV6]: Fix hardcoded removing of old module code [NETLABEL]: Move some initialization code into __init section. [NETLABEL]: Shrink the genl-ops registration code. [AX25] ax25_out: check skb for NULL in ax25_kick() [TCP]: Fix tcp_v4_send_synack() comment [IPV4]: fix alignment of IP-Config output Documentation: fix tcp.txt ...
-
由 Casey Schaufler 提交于
Smack uses CIPSO labeling, but allows for unlabeled packets by specifying an "ambient" label that is applied to incoming unlabeled packets. Because the other end of the connection may dislike IP options, and ssh is one know application that behaves thus, it is prudent to respond in kind. This patch changes the network labeling behavior such that an outgoing packet that would be given a CIPSO label that matches the ambient label is left unlabeled. An "unlbl" domain is added and the netlabel defaulting mechanism invoked rather than assuming that everything is CIPSO. Locking has been added around changes to the ambient label as the mechanisms used to do so are more involved. Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com> Acked-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Gleixner 提交于
The default_disable() function was changed in commit: 76d21601 genirq: do not mask interrupts by default It removed the mask function in favour of the default delayed interrupt disabling. Unfortunately this also broke the shutdown in free_irq() when the last handler is removed from the interrupt for those architectures which rely on the default implementations. Now we can end up with a enabled interrupt line after the last handler was removed, which can result in spurious interrupts. Fix this by adding a default_shutdown function, which is only installed, when the irqchip implementation does provide neither a shutdown nor a disable function. [@stable: affected versions: .21 - .24 ] Pointed-out-by: NMichael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: stable@kernel.org Tested-by: NMichael Hennerich <Michael.Hennerich@analog.com>
-
由 S.Caglar Onur 提交于
The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. So following patch implements usage of the time_after() macro, defined at linux/jiffies.h, which deals with wrapping correctly Signed-off-by: NS.Caglar Onur <caglar@pardus.org.tr> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 David S. Miller 提交于
Needed for kretprobes. Noticed by Ananth N Mavinakayanahalli. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matheos Worku 提交于
BMAC port alternate MAC address index needs to start at 1. Index 0 is used for the main MAC address. Signed-off-by: NMatheos Worku <matheos.worku@sun.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Add missing structure kernel-doc descriptions to sock.h & skbuff.h to fix kernel-doc warnings. (I think that Stephen H. sent a similar patch, but I can't find it. I just want to kill the warnings, with either patch.) Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
The result of the ip_route_output is not assigned to skb. This means that - it is leaked - possible OOPS below dereferrencing skb->dst - no ICMP message for this case Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Young 提交于
hci conn child devices other than rfcomm tty should not be moved here. This is my lost, thanks for Barnaby's reporting and testing. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Young 提交于
Move hci_dev_put to del_conn to avoid hci dev going away before hci conn. Signed-off-by: NDave Young <hidave.darkstar@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide-cd: fix missing residual count setting in DMA mode ht6560b: force prefetch for some devices ht6560b can only do up to PIO mode 4 linux/hdsmart.h: fix goofups (take 2) via82cxxx: add new PCI id for cx700 falconide: locking bugfix MAINTAINERS: update ide-cd maintainer's email address ide/libata: ST310211A has buggy HPA too ide: Add missing base addresses for falconide and macide
-
由 Eric Paris 提交于
Clearly this was supposed to be an == not an = in the if statement. This patch also causes us to stop processing execve args once we have failed rather than continuing to loop on failure over and over and over. Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David S. Miller 提交于
Patrick McHardy notes that print_mac() can get invoked even if the result it unused (f.e. as an argument to pr_debug() when DEBUG is not defined). Mark this function as "__pure" to eliminate this problem. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kiyoshi Ueda 提交于
This patch fixes the missing residual count setting in DMA mode, which was introduced during the conversion to blk-end-request. The residual count could be used by the request submitter. So if it isn't set correctly, some upper layers does not work. (e.g. wodim for CD burning.) The bug is in only DMA mode. In PIO mode, we are setting the residual count correctly, so no need to fix. Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Reported-by: NAndreas Schwab <schwab@suse.de> Tested-by: NAndreas Schwab <schwab@suse.de> Tested-by: NLaura Garcia <nevola@gmail.com> Tested-by: NBorislav Petkov <petkovbb@googlemail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Jan Evert van Grootheest 提交于
Prefetch needs to be set for some ide devices to work when connected to a ht6560b interface. This was not always done properly, causing a system with a HD and CD on the primary interface to not work properly. Or, in effect, hang hard. This patch forces prefetch on devices before checking whether it is necessary to change the settings in the interface This patch should also be applied to 2.4. I don't currently have a 2.4 tree around. (also change my email address) Signed-off-by: NJan Evert van Grootheest <janevert@caiway.nl> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Jan Evert van Grootheest 提交于
According to the datasheet, ht6560b only supports up to PIO mode 4. [bart: manually ported it over 2.6.25-rc2] Signed-off-by: NJan Evert van Grootheest <janevert@caiway.nl> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Fix goofups of commit 76166952 ("<linux/hdsmart.h> is not used by kernel code"). Also update include/linux/Kbuild to reflect the fact that hdsmart.h uses __KERNEL__ ifdefs now. Reported-by: N"Robert P. J. Day" <rpjday@crashcourse.ca> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Andrew Smith 提交于
[bart: manually ported it over via82cxxx changes] From: Andrew Smith <asmith@tranquility.fsbusiness.co.uk> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
commit 8ac4ce74 ("ide: fix host drivers depending on ide_generic to probe for interfaces (take 2)") moved probing to falconide but forgot to take care of Atari specific locking - fix it. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michael Schmitz <schmitz@debian.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Mikko Rapeli 提交于
Signed-off-by: NMikko Rapeli <mikko.rapeli@teleca.com> Tested-by: NBart Champagne <bart@as35701.net> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Geert Uytterhoeven 提交于
commit 29dd5975 ("ide: remove ide_setup_ports") forgot to take into account the base addresses for the CONTROL registers for falconide and macide, as pointed out by Michael Schmitz. Falconide was tested on Aranym. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Michael Schmitz <schmitz@debian.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 David S. Miller 提交于
And also it's helper function pci_is_controller(). Both are unused. I can't remove the equivalent from sparc32 yet as some ancient bus probing code still uses that platform's version. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/nes: Fix possible array overrun RDMA/nes: Fix VLAN support RDMA/nes: Fix MAC interrupt erroneously masked on ifdown IB: Fix return value in ib_device_register_sysfs()
-
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: fix lguest build failure x86: reenable support for system without on node0 x86: CPA: avoid double checking of alias ranges x86: CPA no alias checking for _NX x86: zap invalid and unused pmds in early boot x86: CPA, fix alias checks
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (59 commits) V4L/DVB (7219): zoran: Fix namespace conflicts with Zoran 'GPIO_MAX' enum V4L/DVB (7205): tuner-xc2028 depends on FW_LOADER V4L/DVB (7201): cx88-mpeg: Fix race condition in variable access V4L/DVB (7200): Fix FM firmware loading V4L/DVB (7198): V4L, include ioctl.h in videodev headers V4L/DVB (7197): bttv: Fix overlay divide error V4L/DVB (7195): xc5000: fix build error when built as module V4L/DVB (7194): cx88-mpeg: Allow concurrent access to cx88-mpeg devices V4L/DVB (7193): tveeprom: Add proper tuner mapping for hauppauge eeprom id 133 V4L/DVB (7192): Adds support for Genius TVGo A11MCE V4L/DVB (7189): autosuspend support V4L/DVB (7188): radio-si470x version 1.0.6 V4L/DVB (7186): tda10086: make the 22kHz tone for DISEQC a config option V4L/DVB (7183): radio-si470x: fix build warning V4L/DVB (7180): em28xx: add URB_NO_TRANSFER_DMA_MAP, since urb->transfer_dma is set V4L/DVB (7179): Allow more than one em28xx board V4L/DVB (7164): em28xx-alsa: Add a missing mutex V4L/DVB (7163): em28xx: makes audio settings more stable V4L/DVB (7162): em28xx: Fix endian and returns the correct values V4L/DVB (7161): em28xx: Fix printing debug values higher than 127 ...
-
git://oss.sgi.com:8090/xfs/xfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] Added quota targets and removed dmapi directory [XFS] Fix up xfs out-of-tree builds. (a.k.a. external modules) [XFS] Remove Makefile wrappers in XFS
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] null: Add missing Kconfig dependency on BLKCIPHER [CRYPTO] tcrypt: Add missing Kconfig dependency on BLKCIPHER [HIFN]: Fix invalid config ifdefs for RNG support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt: timer_list: print relative expiry time signed
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: kbuild: explain why DEBUG_SECTION_MISMATCH is UNDEFINED kbuild: fix building vmlinux.o kbuild: allow -fstack-protector to take effect kconfig: fix select in combination with default
-
由 David S. Miller 提交于
The idea of this thing is we could save/restore the firmware's palette when breaking in and out of the firmware prompt. Only one driver implemented this (atyfb) and it's value is questionable. If you're just debugging you don't really care that the characters end up being purple or whatever. And we can provide better debugging and firmware command facilities with minimal in-kernel console I/O drivers. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Nothing ever sets it, so it just takes up space. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This was made static in kernel/panic.c a long time ago. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
It is write-only, nothing tests it's value. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-