- 08 11月, 2013 40 次提交
-
-
由 Patrik Jakobsson 提交于
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Patrik Jakobsson 提交于
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Dave Airlie 提交于
Merge tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel into drm-next Bit a bit -fixes pull request in the merge window than usual dua to two feauture-y things: - Display CRCs are now enabled on all platforms, including the odd DP case on gm45/vlv. Since this is a testing-only feature it should ever hurt, but I figured it'll help with regression-testing -fixes. So I left it in and didn't postpone it to 3.14. - Display power well refactoring from Imre. Would have caused major pain conflict with the bdw stage 1 patches if I'd postpone this to -next. It's only an relatively small interface rework, so shouldn't cause pain. It's also been in my tree since almost 3 weeks already. That accounts for about two thirds of the pull, otherwise just bugfixes: - vlv backlight fix from Jesse/Jani - vlv vblank timestamp fix from Jesse - improved edp detection through vbt from Ville (fixes a vlv issue) - eDP vdd fix from Paulo - fixes for dvo lvds on i830M - a few smaller things all over Note: This contains a backmerge of v3.12. Since the -internal branch always applied on top of -nightly I need that unified base to merge bdw patches. So you'll get a conflict with radeon connector props when pulling this (and nouveau/master will also conflict a bit when Ben doesn't rebase). The backmerge itself only had conflicts in drm/i915. There's also a tiny conflict between Jani's backlight fix and your sysfs lifetime fix in drm-next. * tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits) drm/i915/vlv: use per-pipe backlight controls v2 drm/i915: make backlight functions take a connector drm/i915: move opregion asle request handling to a work queue drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV drm/i915: Make intel_dp_is_edp() less specific drm/i915: Give names to the VBT child device type bits drm/i915/vlv: enable HDA display audio for Valleyview2 drm/i915/dvo: call ->mode_set callback only when the port is running drm/i915: avoid unclaimed registers when capturing the error state drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv drm/i915: scramble reset support for DP port CRC on vlv drm/i915: scramble reset support for DP port CRC on g4x drm/i916: add "auto" pipe CRC source ... Conflicts: MAINTAINERS drivers/gpu/drm/i915/intel_panel.c drivers/gpu/drm/nouveau/core/subdev/mc/base.c drivers/gpu/drm/radeon/atombios_encoders.c drivers/gpu/drm/radeon/radeon_connectors.c
-
由 Dave Airlie 提交于
Though I'm not really happy with how ugly this code is now. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Emil Velikov 提交于
The present code assumes that optimus is present whenever two VGA (PCI_CLASS_DISPLAY_VGA) devices are present. This does not seem to be the case of newer laptops with optimus, in which case the nvidia gpu is a PCI_CLASS_DISPLAY_3D device. Rework the logic so that we count both VGA and 3D devices, when contemplating if optimus is present on the platform. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70208Signed-off-by: NEmil Velikov <emil.l.velikov@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next - Ilia's PMPEG improvements - MSI fixes, and another attempt at enabling by default - Initial GK208 support, just modesetting - "Old" PM code gone, new infrastructure and various different stages of support (depending which chipset / ram type etc) is in its place. This includes support that goes beyond what the previous code was capable of. User control has been deliberately sabotaged, it's not safe to use still. - Thermal management / fan control that's been present for a while is turned ON by default now. - Misc other fixes that have accumulated * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (74 commits) drm/nouveau/fb: implement various bits of work towards memory reclocking drm/nouveau: implement a simple sysfs interface to new pm code drm/nouveau/device: initial control object class, with pstate control methods drm/nouveau/clk: implement power state and engine clock control in core drm/nouveau/volt: implement voltage control in core drm/nouveau/bios: parsing for various tables required for power management drm/nouveau/perfmon: initial infrastructure to expose performance counters drm/nouveau/bus: add interfaces/helpers for sequencer drm/nouveau/bus: make external class definitions pointers drm/nouveau/pwr: initial implementation drm/nouveau/therm: update target fanspeed outside of therm lock drm/nouveau/therm: automatic mode by default drm/nouveau/therm: no toggle fan control either if we can't guarantee no pwm connected drm/nvc0/therm: allow fan control if we've killed the vbios ppwr ucode drm/nouveau/therm: if no bios trip/linear info, default to perf-suggested speed drm/nouveau/therm: add hook for clk to suggest fanspeed to therm drm/nouveau/pwr: assign a subdev id for upcoming implementation drm/nouveau/gpio: return different error code for not found vs invalid drm/nouveau/drm/pm: remove everything except the hwmon interfaces to THERM drm/nouveau/core: make all info-level messages silent for runtime pm ...
-
由 Dave Airlie 提交于
This isn't useful anymore. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Ben Skeggs 提交于
Not even remotely ready for the vast majority of the world. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
User control of this has been hard-coded as disabled for now. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Internal use only at this point. Userspace later. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
THERM will use this before it exists. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Removes the need for special handling of messages in init paths. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
We don't necessarily have fbcon on all devices these days. Fixes suspend on (at least) Quadro NVS 450. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Matches the nv94-nvc0 commit with the same title. Doesn't fix a reported issue, but NVIDIA use this ordering here too, so let's do it just in case. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Fixes link training issues on some boards. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Martin Peres 提交于
This patch adds a way to define a custom delay when scanning for i2c devices because the adt7473 sometimes doesn't like the default bitbanging udelay. Signed-off-by: NMartin Peres <martin.peres@labri.fr> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ilia Mirkin 提交于
Certain combinations of hardware can't actually support the maximum detected speed. Add a quirk list that lists pairs of hostbridge/chip pci ids and the mode that they should work with. See https://bugs.freedesktop.org/show_bug.cgi?id=20341Reported-by: NJason Detring <detringj@gmail.com> Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Reported-by: NAndy Ritger <aritger@nvidia.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-