- 21 10月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
Adding const qualifiers to pointers can ease code review, and spot some bugs. It might allow compiler to optimize code further. For example, is it legal to temporary write a null cksum into tcphdr in tcp_md5_hash_header() ? I am afraid a sniffer could catch the temporary null value... Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 10月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 10月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
Allows ss command (iproute2) to display "ecnseen" if at least one packet with ECT(0) or ECT(1) or ECN was received by this socket. "ecn" means ECN was negotiated at session establishment (TCP level) "ecnseen" means we received at least one packet with ECT fields set (IP level) ss -i ... ESTAB 0 0 192.168.20.110:22 192.168.20.144:38016 ino:5950 sk:f178e400 mem:(r0,w0,f0,t0) ts sack ecn ecnseen bic wscale:7,8 rto:210 rtt:12.5/7.5 cwnd:10 send 9.3Mbps rcv_space:14480 Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 9月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
Rename struct tcp_skb_cb "flags" to "tcp_flags" to ease code review and maintenance. Its content is a combination of FIN/SYN/RST/PSH/ACK/URG/ECE/CWR flags Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 9月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
tcp_md5sig_pool is currently an 'array' (a percpu object) of pointers to struct tcp_md5sig_pool. Only the pointers are NUMA aware, but objects themselves are all allocated on a single node. Remove this extra indirection to get proper percpu memory (NUMA aware) and make code simpler. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 8月, 2011 1 次提交
-
-
由 Ian Campbell 提交于
Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: "Pekka Savola (ipv6)" <pekkas@netcore.fi> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 7月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
Current tcp/udp/sctp global memory limits are not taking into account hugepages allocations, and allow 50% of ram to be used by buffers of a single protocol [ not counting space used by sockets / inodes ...] Lets use nr_free_buffer_pages() and allow a default of 1/8 of kernel ram per protocol, and a minimum of 128 pages. Heavy duty machines sysadmins probably need to tweak limits anyway. References: https://bugzilla.stlinux.com/show_bug.cgi?id=38032Reported-by: Nstarlight <starlight@binnacle.cx> Suggested-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 4月, 2011 1 次提交
-
-
由 Tom Herbert 提交于
This patch uses __copy_from_user_nocache on transmit to bypass data cache for a performance improvement. skb_add_data_nocache and skb_copy_to_page_nocache can be called by sendmsg functions to use this feature, initial support is in tcp_sendmsg. This functionality is configurable per device using ethtool. Presumably, this feature would only be useful when the driver does not touch the data. The feature is turned on by default if a device indicates that it does some form of checksum offload; it is off by default for devices that do no checksum offload or indicate no checksum is necessary. For the former case copy-checksum is probably done anyway, in the latter case the device is likely loopback in which case the no cache copy is probably not beneficial. This patch was tested using 200 instances of netperf TCP_RR with 1400 byte request and one byte reply. Platform is 16 core AMD x86. No-cache copy disabled: 672703 tps, 97.13% utilization 50/90/99% latency:244.31 484.205 1028.41 No-cache copy enabled: 702113 tps, 96.16% utilization, 50/90/99% latency 238.56 467.56 956.955 Using 14000 byte request and response sizes demonstrate the effects more dramatically: No-cache copy disabled: 79571 tps, 34.34 %utlization 50/90/95% latency 1584.46 2319.59 5001.76 No-cache copy enabled: 83856 tps, 34.81% utilization 50/90/95% latency 2508.42 2622.62 2735.88 Note especially the effect on latency tail (95th percentile). This seems to provide a nice performance improvement and is consistent in the tests I ran. Presumably, this would provide the greatest benfits in the presence of an application workload stressing the cache and a lot of transmit data happening. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 3月, 2011 1 次提交
-
-
由 Mario Schuknecht 提交于
In contrast to SIOCOUTQ which returns the amount of data sent but not yet acknowledged plus data not yet sent this patch only returns the data not sent. For various methods of live streaming bitrate control it may be helpful to know how much data are in the tcp outqueue are not sent yet. Signed-off-by: NMario Schuknecht <m.schuknecht@dresearch.de> Signed-off-by: NSteffen Sledz <sledz@dresearch.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 2月, 2011 1 次提交
-
-
由 Shan Wei 提交于
Now, TCP_CHECK_TIMER is not used for debuging, it does nothing. And, it has been there for several years, maybe 6 years. Remove it to keep code clearer. Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 1月, 2011 1 次提交
-
-
由 Michał Mirosław 提交于
Quoting Ben Hutchings: we presumably won't be defining features that can only be enabled on 64-bit architectures. Occurences found by `grep -r` on net/, drivers/net, include/ [ Move features and vlan_features next to each other in struct netdev, as per Eric Dumazet's suggestion -DaveM ] Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 11月, 2010 1 次提交
-
-
由 David S. Miller 提交于
Use TCP_MIN_MSS instead of constant 64. Reported-by: NMin Zhang <mzhang@mvista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 11月, 2010 2 次提交
-
-
由 David S. Miller 提交于
As noted by Steve Chen, since commit f5fff5dc ("tcp: advertise MSS requested by user") we can end up with a situation where tcp_select_initial_window() does a divide by a zero (or even negative) mss value. The problem is that sometimes we effectively subtract TCPOLEN_TSTAMP_ALIGNED and/or TCPOLEN_MD5SIG_ALIGNED from the mss. Fix this by increasing the minimum from 8 to 64. Reported-by: NSteve Chen <schen@mvista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Robin Holt tried to boot a 16TB machine and found some limits were reached : sysctl_tcp_mem[2], sysctl_udp_mem[2] We can switch infrastructure to use long "instead" of "int", now atomic_long_t primitives are available for free. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Reported-by: NRobin Holt <holt@sgi.com> Reviewed-by: NRobin Holt <holt@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 11月, 2010 1 次提交
-
-
由 Joe Perches 提交于
Coalesce long formats. Align arguments. Remove KERN_<level>. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 9月, 2010 1 次提交
-
-
由 David S. Miller 提交于
Fixes kernel bugzilla #16603 tcp_sendmsg() truncates iov_len to an 'int' which a 4GB write to write zero bytes, for example. There is also the problem higher up of how verify_iovec() works. It wants to prevent the total length from looking like an error return value. However it does this using 'int', but syscalls return 'long' (and thus signed 64-bit on 64-bit machines). So it could trigger false-positives on 64-bit as written. So fix it to use 'long'. Reported-by: NOlaf Bonorden <bono@onlinehome.de> Reported-by: NDaniel Büse <dbuese@gmx.de> Reported-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 9月, 2010 1 次提交
-
-
由 Tom Marshall 提交于
If a RST comes in immediately after checking sk->sk_err, tcp_poll will return POLLIN but not POLLOUT. Fix this by checking sk->sk_err at the end of tcp_poll. Additionally, ensure the correct order of operations on SMP machines with memory barriers. Signed-off-by: NTom Marshall <tdm.code@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 8月, 2010 1 次提交
-
-
由 Jerry Chu 提交于
This patch provides a "user timeout" support as described in RFC793. The socket option is also needed for the the local half of RFC5482 "TCP User Timeout Option". TCP_USER_TIMEOUT is a TCP level socket option that takes an unsigned int, when > 0, to specify the maximum amount of time in ms that transmitted data may remain unacknowledged before TCP will forcefully close the corresponding connection and return ETIMEDOUT to the application. If 0 is given, TCP will continue to use the system default. Increasing the user timeouts allows a TCP connection to survive extended periods without end-to-end connectivity. Decreasing the user timeouts allows applications to "fail fast" if so desired. Otherwise it may take upto 20 minutes with the current system defaults in a normal WAN environment. The socket option can be made during any state of a TCP connection, but is only effective during the synchronized states of a connection (ESTABLISHED, FIN-WAIT-1, FIN-WAIT-2, CLOSE-WAIT, CLOSING, or LAST-ACK). Moreover, when used with the TCP keepalive (SO_KEEPALIVE) option, TCP_USER_TIMEOUT will overtake keepalive to determine when to close a connection due to keepalive failure. The option does not change in anyway when TCP retransmits a packet, nor when a keepalive probe will be sent. This option, like many others, will be inherited by an acceptor from its listener. Signed-off-by: NH.K. Jerry Chu <hkchu@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 8月, 2010 2 次提交
-
-
由 KOSAKI Motohiro 提交于
This issue come from ruby language community. Below test program hang up when only run on Linux. % uname -mrsv Linux 2.6.26-2-486 #1 Sat Dec 26 08:37:39 UTC 2009 i686 % ruby -rsocket -ve ' BasicSocket.do_not_reverse_lookup = true serv = TCPServer.open("127.0.0.1", 0) s1 = TCPSocket.open("127.0.0.1", serv.addr[1]) s2 = serv.accept s2.close s1.write("a") rescue p $! s1.write("a") rescue p $! Thread.new { s1.write("a") }.join' ruby 1.9.3dev (2010-07-06 trunk 28554) [i686-linux] #<Errno::EPIPE: Broken pipe> [Hang Here] FreeBSD, Solaris, Mac doesn't. because Ruby's write() method call select() internally. and tcp_poll has a bug. SUS defined 'ready for writing' of select() as following. | A descriptor shall be considered ready for writing when a call to an output | function with O_NONBLOCK clear would not block, whether or not the function | would transfer data successfully. That said, EPIPE situation is clearly one of 'ready for writing'. We don't have read-side issue because tcp_poll() already has read side shutdown care. | if (sk->sk_shutdown & RCV_SHUTDOWN) | mask |= POLLIN | POLLRDNORM | POLLRDHUP; So, Let's insert same logic in write side. - reference url http://blade.nagaokaut.ac.jp/cgi-bin/scat.rb/ruby/ruby-core/31065 http://blade.nagaokaut.ac.jp/cgi-bin/scat.rb/ruby/ruby-core/31068Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As discovered by Anton Blanchard, current code to autotune tcp_death_row.sysctl_max_tw_buckets, sysctl_tcp_max_orphans and sysctl_max_syn_backlog makes little sense. The bigger a page is, the less tcp_max_orphans is : 4096 on a 512GB machine in Anton's case. (tcp_hashinfo.bhash_size * sizeof(struct inet_bind_hashbucket)) is much bigger if spinlock debugging is on. Its wrong to select bigger limits in this case (where kernel structures are also bigger) bhash_size max is 65536, and we get this value even for small machines. A better ground is to use size of ehash table, this also makes code shorter and more obvious. Based on a patch from Anton, and another from David. Reported-and-tested-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 8月, 2010 1 次提交
-
-
由 David S. Miller 提交于
As reported by Anton Blanchard when we use percpu_counter_read_positive() to make our orphan socket limit checks, the check can be off by up to num_cpus_online() * batch (which is 32 by default) which on a 128 cpu machine can be as large as the default orphan limit itself. Fix this by doing the full expensive sum check if the optimized check triggers. Reported-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
-
- 03 8月, 2010 1 次提交
-
-
由 Josh Hunt 提交于
Initial TCP thin-stream commit did not add getsockopt support for the new socket options: TCP_THIN_LINEAR_TIMEOUTS and TCP_THIN_DUPACK. This adds support for them. Signed-off-by: NJosh Hunt <johunt@akamai.com> Tested-by: NAndreas Petlund <apetlund@simula.no> Acked-by: NAndreas Petlund <apetlund@simula.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 7月, 2010 1 次提交
-
-
由 Dmitry Popov 提交于
There is a bug in do_tcp_setsockopt(net/ipv4/tcp.c), TCP_COOKIE_TRANSACTIONS case. In some cases (when tp->cookie_values == NULL) new tcp_cookie_values structure can be allocated (at cvp), but not bound to tp->cookie_values. So a memory leak occurs. Signed-off-by: NDmitry Popov <dp@highloadlab.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 7月, 2010 1 次提交
-
-
由 Changli Gao 提交于
rfs: call sock_rps_record_flow() in tcp_splice_read() call sock_rps_record_flow() in tcp_splice_read(), so the applications using splice(2) or sendfile(2) can utilize RFS. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> ---- net/ipv4/tcp.c | 1 + 1 file changed, 1 insertion(+) Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 7月, 2010 2 次提交
-
-
由 Changli Gao 提交于
a new boolean flag no_autobind is added to structure proto to avoid the autobind calls when the protocol is TCP. Then sock_rps_record_flow() is called int the TCP's sendmsg() and sendpage() pathes. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> ---- include/net/inet_common.h | 4 ++++ include/net/sock.h | 1 + include/net/tcp.h | 8 ++++---- net/ipv4/af_inet.c | 15 +++++++++------ net/ipv4/tcp.c | 11 +++++------ net/ipv4/tcp_ipv4.c | 3 +++ net/ipv6/af_inet6.c | 8 ++++---- net/ipv6/tcp_ipv6.c | 3 +++ 8 files changed, 33 insertions(+), 20 deletions(-) Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
CodingStyle cleanups EXPORT_SYMBOL should immediately follow the symbol declaration. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 6月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
use this_cpu_ptr(p) instead of per_cpu_ptr(p, smp_processor_id()) Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 6月, 2010 1 次提交
-
-
由 Konstantin Khorenko 提交于
i've found that tcp_close() can be called for an already closed socket, but still sends reset in this case (tcp_send_active_reset()) which seems to be incorrect. Moreover, a packet with reset is sent with different source port as original port number has been already cleared on socket. Besides that incrementing stat counter for LINUX_MIB_TCPABORTONCLOSE also does not look correct in this case. Initially this issue was found on 2.6.18-x RHEL5 kernel, but the same seems to be true for the current mainstream kernel (checked on 2.6.35-rc3). Please, correct me if i missed something. How that happens: 1) the server receives a packet for socket in TCP_CLOSE_WAIT state that triggers a tcp_reset(): Call Trace: <IRQ> [<ffffffff8025b9b9>] tcp_reset+0x12f/0x1e8 [<ffffffff80046125>] tcp_rcv_state_process+0x1c0/0xa08 [<ffffffff8003eb22>] tcp_v4_do_rcv+0x310/0x37a [<ffffffff80028bea>] tcp_v4_rcv+0x74d/0xb43 [<ffffffff8024ef4c>] ip_local_deliver_finish+0x0/0x259 [<ffffffff80037131>] ip_local_deliver+0x200/0x2f4 [<ffffffff8003843c>] ip_rcv+0x64c/0x69f [<ffffffff80021d89>] netif_receive_skb+0x4c4/0x4fa [<ffffffff80032eca>] process_backlog+0x90/0xec [<ffffffff8000cc50>] net_rx_action+0xbb/0x1f1 [<ffffffff80012d3a>] __do_softirq+0xf5/0x1ce [<ffffffff8001147a>] handle_IRQ_event+0x56/0xb0 [<ffffffff8006334c>] call_softirq+0x1c/0x28 [<ffffffff80070476>] do_softirq+0x2c/0x85 [<ffffffff80070441>] do_IRQ+0x149/0x152 [<ffffffff80062665>] ret_from_intr+0x0/0xa <EOI> [<ffffffff80008a2e>] __handle_mm_fault+0x6cd/0x1303 [<ffffffff80008903>] __handle_mm_fault+0x5a2/0x1303 [<ffffffff80033a9d>] cache_free_debugcheck+0x21f/0x22e [<ffffffff8006a263>] do_page_fault+0x49a/0x7dc [<ffffffff80066487>] thread_return+0x89/0x174 [<ffffffff800c5aee>] audit_syscall_exit+0x341/0x35c [<ffffffff80062e39>] error_exit+0x0/0x84 tcp_rcv_state_process() ... // (sk_state == TCP_CLOSE_WAIT here) ... /* step 2: check RST bit */ if(th->rst) { tcp_reset(sk); goto discard; } ... --------------------------------- tcp_rcv_state_process tcp_reset tcp_done tcp_set_state(sk, TCP_CLOSE); inet_put_port __inet_put_port inet_sk(sk)->num = 0; sk->sk_shutdown = SHUTDOWN_MASK; 2) After that the process (socket owner) tries to write something to that socket and "inet_autobind" sets a _new_ (which differs from the original!) port number for the socket: Call Trace: [<ffffffff80255a12>] inet_bind_hash+0x33/0x5f [<ffffffff80257180>] inet_csk_get_port+0x216/0x268 [<ffffffff8026bcc9>] inet_autobind+0x22/0x8f [<ffffffff80049140>] inet_sendmsg+0x27/0x57 [<ffffffff8003a9d9>] do_sock_write+0xae/0xea [<ffffffff80226ac7>] sock_writev+0xdc/0xf6 [<ffffffff800680c7>] _spin_lock_irqsave+0x9/0xe [<ffffffff8001fb49>] __pollwait+0x0/0xdd [<ffffffff8008d533>] default_wake_function+0x0/0xe [<ffffffff800a4f10>] autoremove_wake_function+0x0/0x2e [<ffffffff800f0b49>] do_readv_writev+0x163/0x274 [<ffffffff80066538>] thread_return+0x13a/0x174 [<ffffffff800145d8>] tcp_poll+0x0/0x1c9 [<ffffffff800c56d3>] audit_syscall_entry+0x180/0x1b3 [<ffffffff800f0dd0>] sys_writev+0x49/0xe4 [<ffffffff800622dd>] tracesys+0xd5/0xe0 3) sendmsg fails at last with -EPIPE (=> 'write' returns -EPIPE in userspace): F: tcp_sendmsg1 -EPIPE: sk=ffff81000bda00d0, sport=49847, old_state=7, new_state=7, sk_err=0, sk_shutdown=3 Call Trace: [<ffffffff80027557>] tcp_sendmsg+0xcb/0xe87 [<ffffffff80033300>] release_sock+0x10/0xae [<ffffffff8016f20f>] vgacon_cursor+0x0/0x1a7 [<ffffffff8026bd32>] inet_autobind+0x8b/0x8f [<ffffffff8003a9d9>] do_sock_write+0xae/0xea [<ffffffff80226ac7>] sock_writev+0xdc/0xf6 [<ffffffff800680c7>] _spin_lock_irqsave+0x9/0xe [<ffffffff8001fb49>] __pollwait+0x0/0xdd [<ffffffff8008d533>] default_wake_function+0x0/0xe [<ffffffff800a4f10>] autoremove_wake_function+0x0/0x2e [<ffffffff800f0b49>] do_readv_writev+0x163/0x274 [<ffffffff80066538>] thread_return+0x13a/0x174 [<ffffffff800145d8>] tcp_poll+0x0/0x1c9 [<ffffffff800c56d3>] audit_syscall_entry+0x180/0x1b3 [<ffffffff800f0dd0>] sys_writev+0x49/0xe4 [<ffffffff800622dd>] tracesys+0xd5/0xe0 tcp_sendmsg() ... /* Wait for a connection to finish. */ if ((1 << sk->sk_state) & ~(TCPF_ESTABLISHED | TCPF_CLOSE_WAIT)) { int old_state = sk->sk_state; if ((err = sk_stream_wait_connect(sk, &timeo)) != 0) { if (f_d && (err == -EPIPE)) { printk("F: tcp_sendmsg1 -EPIPE: sk=%p, sport=%u, old_state=%d, new_state=%d, " "sk_err=%d, sk_shutdown=%d\n", sk, ntohs(inet_sk(sk)->sport), old_state, sk->sk_state, sk->sk_err, sk->sk_shutdown); dump_stack(); } goto out_err; } } ... 4) Then the process (socket owner) understands that it's time to close that socket and does that (and thus triggers sending reset packet): Call Trace: ... [<ffffffff80032077>] dev_queue_xmit+0x343/0x3d6 [<ffffffff80034698>] ip_output+0x351/0x384 [<ffffffff80251ae9>] dst_output+0x0/0xe [<ffffffff80036ec6>] ip_queue_xmit+0x567/0x5d2 [<ffffffff80095700>] vprintk+0x21/0x33 [<ffffffff800070f0>] check_poison_obj+0x2e/0x206 [<ffffffff80013587>] poison_obj+0x36/0x45 [<ffffffff8025dea6>] tcp_send_active_reset+0x15/0x14d [<ffffffff80023481>] dbg_redzone1+0x1c/0x25 [<ffffffff8025dea6>] tcp_send_active_reset+0x15/0x14d [<ffffffff8000ca94>] cache_alloc_debugcheck_after+0x189/0x1c8 [<ffffffff80023405>] tcp_transmit_skb+0x764/0x786 [<ffffffff8025df8a>] tcp_send_active_reset+0xf9/0x14d [<ffffffff80258ff1>] tcp_close+0x39a/0x960 [<ffffffff8026be12>] inet_release+0x69/0x80 [<ffffffff80059b31>] sock_release+0x4f/0xcf [<ffffffff80059d4c>] sock_close+0x2c/0x30 [<ffffffff800133c9>] __fput+0xac/0x197 [<ffffffff800252bc>] filp_close+0x59/0x61 [<ffffffff8001eff6>] sys_close+0x85/0xc7 [<ffffffff800622dd>] tracesys+0xd5/0xe0 So, in brief: * a received packet for socket in TCP_CLOSE_WAIT state triggers tcp_reset() which clears inet_sk(sk)->num and put socket into TCP_CLOSE state * an attempt to write to that socket forces inet_autobind() to get a new port (but the write itself fails with -EPIPE) * tcp_close() called for socket in TCP_CLOSE state sends an active reset via socket with newly allocated port This adds an additional check in tcp_close() for already closed sockets. We do not want to send anything to closed sockets. Signed-off-by: NKonstantin Khorenko <khorenko@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 6月, 2010 1 次提交
-
-
由 Changli Gao 提交于
unify tcp flag macros: TCPHDR_FIN, TCPHDR_SYN, TCPHDR_RST, TCPHDR_PSH, TCPHDR_ACK, TCPHDR_URG, TCPHDR_ECE and TCPHDR_CWR. TCBCB_FLAG_* are replaced with the corresponding TCPHDR_*. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> ---- include/net/tcp.h | 24 ++++++------- net/ipv4/tcp.c | 8 ++-- net/ipv4/tcp_input.c | 2 - net/ipv4/tcp_output.c | 59 ++++++++++++++++----------------- net/netfilter/nf_conntrack_proto_tcp.c | 32 ++++++----------- net/netfilter/xt_TCPMSS.c | 4 -- 6 files changed, 58 insertions(+), 71 deletions(-) Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 5月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
tcp_md5_hash_skb_data() should handle skb->frag_list, and eventually recurse. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 5月, 2010 1 次提交
-
-
由 Joe Perches 提交于
Also added an explicit break; to avoid a fallthrough in net/ipv4/tcp_input.c Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 5月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
TCP MD5 support uses percpu data for temporary storage. It currently disables preemption so that same storage cannot be reclaimed by another thread on same cpu. We also have to make sure a softirq handler wont try to use also same context. Various bug reports demonstrated corruptions. Fix is to disable preemption and BH. Reported-by: NBhaskar Dutta <bhaskie@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 4月, 2010 1 次提交
-
-
由 Flavio Leitner 提交于
RFC 1122 says the following: ... Keep-alive packets MUST only be sent when no data or acknowledgement packets have been received for the connection within an interval. ... The acknowledgement packet is reseting the keepalive timer but the data packet isn't. This patch fixes it by checking the timestamp of the last received data packet too when the keepalive timer expires. Signed-off-by: NFlavio Leitner <fleitner@redhat.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 4月, 2010 2 次提交
-
-
由 Eric Dumazet 提交于
Sparse can help us find endianness bugs, but we need to make some cleanups to be able to more easily spot real bugs. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Define a new function to return the waitqueue of a "struct sock". static inline wait_queue_head_t *sk_sleep(struct sock *sk) { return sk->sk_sleep; } Change all read occurrences of sk_sleep by a call to this function. Needed for a future RCU conversion. sk_sleep wont be a field directly available. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 3月, 2010 1 次提交
-
-
由 Steven J. Magnani 提交于
tcp_read_sock() can have a eat skbs without immediately advancing copied_seq. This can cause a panic in tcp_collapse() if it is called as a result of the recv_actor dropping the socket lock. A userspace program that splices data from a socket to either another socket or to a file can trigger this bug. Signed-off-by: NSteven J. Magnani <steve@digidescorp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 21 3月, 2010 1 次提交
-
-
由 Steven J. Magnani 提交于
Under NET_DMA, data transfer can grind to a halt when userland issues a large read on a socket with a high RCVLOWAT (i.e., 512 KB for both). This appears to be because the NET_DMA design queues up lots of memcpy operations, but doesn't issue or wait for them (and thus free the associated skbs) until it is time for tcp_recvmesg() to return. The socket hangs when its TCP window goes to zero before enough data is available to satisfy the read. Periodically issue asynchronous memcpy operations, and free skbs for ones that have completed, to prevent sockets from going into zero-window mode. Signed-off-by: NSteven J. Magnani <steve@digidescorp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 3月, 2010 1 次提交
-
-
由 Alexandra Kossovsky 提交于
From: Alexandra.Kossovsky@oktetlabs.ru Fixes kernel bugzilla #15541 Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 2月, 2010 1 次提交
-
-
由 Andreas Petlund 提交于
This patch enables fast retransmissions after one dupACK for TCP if the stream is identified as thin. This will reduce latencies for thin streams that are not able to trigger fast retransmissions due to high packet interarrival time. This mechanism is only active if enabled by iocontrol or syscontrol and the stream is identified as thin. Signed-off-by: NAndreas Petlund <apetlund@simula.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-