The descriptions for lpfc_xri_split and lpfc_enable_fc4_type were
poor. Revise for better understanding:

  lpfc_xri_split - Percentage of FCP XRI resources versus NVME
  lpfc_enable_fc4_type - Enable FC4 Protocol support - FCP / NVME
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Always set ctxp->state to LPFC_NVMET_STE_ABORT if ABORT op gets called
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There are several log messages that report abnormal terminations that by
default are marked warn. These are typically the result of failures due
to invalid controller state or abort completions. They are all natural
when a controller resets.

Unfortunately, as they are logged by default, it makes the admin very
concerned.

Convert the messages to Info.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The driver is encountering  oops in lpfc_sli_calc_ring.

The driver is setting hba_wqidx for FCP based on the policy in use for
NVME. The two may not be the same.  Change to set the wqidx based on the
FCP policy.

Cc: <stable@vger.kernel.org> # 4.12+
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Under heavy target nvme load duration, the lpfc irq handler is
encountering cpu lockup warnings.

Convert the driver to a shortened ISR handler which identifies the
interrupting condition then schedules a workq thread to process the
completion queue the interrupt was for. This moves all the real work
into the workq element.

As nvmet_fc upcalls are no longer in ISR context, don't set the feature
flags
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Need to make ktime samples more accurate

If ktime is turned on in the middle of an IO, the max calculation could
be misleading. Base sampling on the start time of the IO as opposed to
ktime_on.

Make ISR ktime timestamps be from when CQE is read instead of EQE.
Added additional sanity checks when deciding whether to accept an IO
sample or not.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Local Reject/Invalid RPI errors seen during discovery.

Temporary RPI cleanup was occurring regardless of SLI rev. It's only
necessary on SLI-4.

Adjust the test for whether cleanup is necessary.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Warning messages when NVME_TARGET_FC not defined on ppc builds

The lpfc_nvmet_replenish_context() function is only meaningful when NVME
target mode enabled. Surround the function body with ifdefs for target
mode enablement.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In a link bounce scenario, a condition can occur where the discovery
engine swaps an ndlp structure (address change for an nport). While the
swap was successfully executed by the discovery engine, the driver did
not properly detect a change in the ndlp bound to the nvme rport.  This
error resulted in the nvme host transport issuing an IO to the correct
nvme rport, but the lpfc driver addressed a ndlp with an NLP_UNUSED
status and failed the io. This resulting it it looking like there were
missing namespaces and applications failed due to io errors.

To fix, in lpfc_nvme_register_rport, rework the "rebind" case to break
the nvme rport<->ndlp association when the ndlp already has an
nrport. Then rebind the rport to the correct ndlp data and backpointers.

[mkp: typo]
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The driver crashes when attempting to use a freed ndpl pointer.

The pci_remove_one handler runs on a separate kernel thread. The order
of the removal is starting by freeing all of the ndlps and then
disabling interrupts. In between these two events the driver can still
receive an ELS and process it. When it tries to use the ndlp pointer
will be NULL

Change the order of the pci_remove_one vs disable interrupts so that
interrupts are disabled before the ndlp's are freed.

Cc: <stable@vger.kernel.org> # 4.12+
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

During pci hot plug, the kernel crashes in a list_add_call

The lookup by tag function will return null if the IOCB is out of range
or does not have the on txcmplq flag set.

Fix: Check for null return from lookup by tag.

Cc: <stable@vger.kernel.org> # 4.12+
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

During pci hot plug, the kernel crashes in timer management code.

The sli4 remove_one handler is not stoping the timers as it starts to
remove the port so that it can be swapped.

Fix: Stop the timers early in the handler routine.

Note: Fix in SLI-4 only. SLI-3 already stopped the timers properly.

Cc: <stable@vger.kernel.org> # 4.12+
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Reviewed-by: NGerry Morong <gerry.morong@microsemi.com>
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix a small cosmetic bug in a very rarely encountered error message that
can occur when a LD has a corrupted raid map.
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Update the driver's PCI IDs.
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Remove unused variable sas_ha to clean up build warning
"unused variable  sas_ha  [-Wunused-variable]"

Fixes: 042ebd29 ("scsi: libsas: kill useless ha_event and do some cleanup")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since the command type of UTRD in UFS 2.1 specification is the same with
UFS 2.0. And it assumes the future UFS specification will follow the
same definition.
Signed-off-by: Nkehuanlin <kehuanlin@pinecone.net>
Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Several configurable fields of the Device Descriptor and the Unit
Descriptors determine the Boot LUN status. The bBootEnable field and the
bBootLunEn attribute is set to zero by default, so the Boot LUN is
disabled by default.

At which point the scsi device add for Boot LUN will fail, but we can
continue to use the ufs device in fact. This failure shouldn't abort the
device boot.
Signed-off-by: NHuanlin Ke <kehuanlin@pinecone.net>
Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NZang Leigang <zangleigang@hisilicon.com>
Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NZang Leigang <zangleigang@hisilicon.com>
Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since right after the user copy, we are going to memset(&karg, 0,
sizeof(karg)), the copy_from_user is redundant
Signed-off-by: NMeng Xu <mengxu.gatech@gmail.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use *_pool_zalloc rather than *_pool_alloc followed by memset with 0.
Found by coccinelle spatch "api/alloc/pool_zalloc-simple.cocci"
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use *_pool_zalloc rather than *_pool_alloc followed by memset with 0.
Found by coccinelle spatch "api/alloc/pool_zalloc-simple.cocci"
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Acked-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Device handlers are optional, and for some handlers like ALUA only
implemented for certain device types.  So suppress any errors for
unsupported devices.
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Rather than having each device handler implementing their own error
mapping, have the ->attach() call return a SCSI_DH_XXX error code and
implement the mapping in scsi_dh_handler_attach().
Suggested-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Reporting a maximum number of blocks that is not aligned on the device
physical size would cause a large write same request to be split into
physically unaligned chunks by __blkdev_issue_write_zeroes() and
__blkdev_issue_write_same(), even if the caller of these functions took
care to align its request to physical sectors.

Make sure the maximum reported is aligned to the device physical block
size. This is only an optional optimization for regular disks, but this
is mandatory to avoid failure of large write same requests directed at
sequential write required zones of host-managed ZBC disks.

[mkp: tweaked commit message]
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Set PCIe relaxed ordering bits in FW_IQ_CMD if relaxed ordering is
enabled in the PCIe device.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

csk is always null on the error return path and so the non-null check
and call to cxgbi_sock_closed on csk is redundant and can be removed.

Detected by: CoverityScan CID#114329 ("Logically dead code")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Events will be added to defer_q list when setting ha->status to
SAS_HA_DRAINING. Events will be called after drain workqueue.

Those events are added to the head of list, but they are scanned one by
one from the head to the tail, which will cause those events be called
in the reverse order of being added. So change list_add to list_add_tail
in function sas_queue_work.
Signed-off-by: Nchenxiang <chenxiang66@hisilicon.com>
Signed-off-by: NJason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Rename function notify_port_event() to sas_notify_port_event(), which
will be consistent with sas_notify_phy_event().
Signed-off-by: NJason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The ha_event now has only one event HAE_RESET, and this event does
nothing. Kill it and do some cleanup.

This is a preparation for enhance libsas hotplug feature in the next
patches.
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When a NETDEV_UNREGISTER notification is received the network device is
_deleted_ after the callback returns.  So we cannot use a workqueue
here, as this would cause an inversion when removing the device as the
netdev is already gone.  This manifests with a nasty warning during
shutdown:

sysfs group ffffffff81eff0e0 not found for kobject 'fc_host7'

So open-code fcoe_destroy_work() when receiving the notification to
avoid this inversion.
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NLee Duncan <lduncan@suse.com>
Acked-by: NJohannes Thumshirn <jth@kernel.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Separate out fcoe_vport_remove() from fcoe_destroy_work().  Required for
the next patch.
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NLee Duncan <lduncan@suse.com>
Acked-by: NJohannes Thumshirn <jth@kernel.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This closes a possible race condition in _fcoe_create() where we drop
the rtnl_lock() before calling fcoe_interface_remove().
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NLee Duncan <lduncan@suse.com>
Acked-by: NJohannes Thumshirn <jth@kernel.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Don't populate const arrays on the stack, instead make them static.
Makes the object code smaller by over 740 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
   3840	    208	      0	   4048	    fd0	drivers/scsi/ufs/tc-dwc-g210.o

After:
   text	   data	    bss	    dec	    hex	filename
   2679	    624	      0	   3303	    ce7	drivers/scsi/ufs/tc-dwc-g210.o
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Pointers bnx2i_cmd are set but never used, so they can be removed.
Signed-off-by: NChristos Gkekas <chris.gekas@gmail.com>
Acked-by: NManish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The pointer eqe is always non-null inside the while loop, so the check
to see if eqe is NULL is redudant and hence can be removed.

Detected by CoverityScan CID#1248693 ("Logically Dead Code")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

First, number of CPUs can't be negative number.

Second, different signnnedness leads to suboptimal code in the following
cases:

1)
	kmalloc(nr_cpu_ids * sizeof(X));

"int" has to be sign extended to size_t.

2)
	while (loff_t *pos < nr_cpu_ids)

MOVSXD is 1 byte longed than the same MOV.

Other cases exist as well. Basically compiler is told that nr_cpu_ids
can't be negative which can't be deduced if it is "int".

Code savings on allyesconfig kernel: -3KB

	add/remove: 0/0 grow/shrink: 25/264 up/down: 261/-3631 (-3370)
	function                                     old     new   delta
	coretemp_cpu_online                          450     512     +62
	rcu_init_one                                1234    1272     +38
	pci_device_probe                             374     399     +25

				...

	pgdat_reclaimable_pages                      628     556     -72
	select_fallback_rq                           446     369     -77
	task_numa_find_cpu                          1923    1807    -116

Link: http://lkml.kernel.org/r/20170819114959.GA30580@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

memset32() can be used to initialise these three arrays.  Minor code
footprint reduction.

Link: http://lkml.kernel.org/r/20170720184539.31609-8-willy@infradead.orgSigned-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Without CONFIG_BLK_DEV_BSGLIB, we get a link error here:

drivers/scsi/scsi_transport_sas.o: In function `sas_bsg_initialize':
scsi_transport_sas.c:(.text+0xcc0): undefined reference to `bsg_setup_queue'
scsi_transport_sas.c:(.text+0xd10): undefined reference to `bsg_setup_queue'
drivers/scsi/scsi_transport_sas.o: In function `sas_smp_dispatch':
scsi_transport_sas.c:(.text+0xe8c): undefined reference to `bsg_job_done'

This modifies the Kconfig 'select' statement accordingly, and matching
what we do for the other two scsi_transport implementations that use
bsglib.

Fixes: 651a0136 ("scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>