Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 20 6月, 2011 1 次提交
  3. 16 6月, 2011 1 次提交
  5. 13 6月, 2011 1 次提交
  7. 27 5月, 2011 9 次提交
    • C
      arch/tile: more /proc and /sys file support · f133ecca
      由 Chris Metcalf 提交于 
      This change introduces a few of the less controversial /proc and
/proc/sys interfaces for tile, along with sysfs attributes for
various things that were originally proposed as /proc/tile files.
It also adjusts the "hardwall" proc API.

Arnd Bergmann reviewed the initial arch/tile submission, which
included a complete set of all the /proc/tile and /proc/sys/tile
knobs that we had added in a somewhat ad hoc way during initial
development, and provided feedback on where most of them should go.

One knob turned out to be similar enough to the existing
/proc/sys/debug/exception-trace that it was re-implemented to use
that model instead.

Another knob was /proc/tile/grid, which reported the "grid" dimensions
of a tile chip (e.g. 8x8 processors = 64-core chip).  Arnd suggested
looking at sysfs for that, so this change moves that information
to a pair of sysfs attributes (chip_width and chip_height) in the
/sys/devices/system/cpu directory.  We also put the "chip_serial"
and "chip_revision" information from our old /proc/tile/board file
as attributes in /sys/devices/system/cpu.

Other information collected via hypervisor APIs is now placed in
/sys/hypervisor.  We create a /sys/hypervisor/type file (holding the
constant string "tilera") to be parallel with the Xen use of
/sys/hypervisor/type holding "xen".  We create three top-level files,
"version" (the hypervisor's own version), "config_version" (the
version of the configuration file), and "hvconfig" (the contents of
the configuration file).  The remaining information from our old
/proc/tile/board and /proc/tile/switch files becomes an attribute
group appearing under /sys/hypervisor/board/.

Finally, after some feedback from Arnd Bergmann for the previous
version of this patch, the /proc/tile/hardwall file is split up into
two conceptual parts.  First, a directory /proc/tile/hardwall/ which
contains one file per active hardwall, each file named after the
hardwall's ID and holding a cpulist that says which cpus are enclosed by
the hardwall.  Second, a /proc/PID file "hardwall" that is either
empty (for non-hardwall-using processes) or contains the hardwall ID.

Finally, this change pushes the /proc/sys/tile/unaligned_fixup/
directory, with knobs controlling the kernel code for handling the
fixup of unaligned exceptions.
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
      f133ecca
    • O
      fs/proc/vmcore.c: add hook to read_from_oldmem() to check for non-ram pages · 997c136f
      由 Olaf Hering 提交于 
      The balloon driver in a Xen guest frees guest pages and marks them as
mmio.  When the kernel crashes and the crash kernel attempts to read the
oldmem via /proc/vmcore a read from ballooned pages will generate 100%
load in dom0 because Xen asks qemu-dm for the page content.  Since the
reads come in as 8byte requests each ballooned page is tried 512 times.

With this change a hook can be registered which checks wether the given
pfn is really ram.  The hook has to return a value > 0 for ram pages, a
value < 0 on error (because the hypercall is not known) and 0 for non-ram
pages.

This will reduce the time to read /proc/vmcore.  Without this change a
512M guest with 128M crashkernel region needs 200 seconds to read it, with
this change it takes just 2 seconds.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      997c136f
    • K
      proc: fix pagemap_read() error case · 98bc93e5
      由 KOSAKI Motohiro 提交于 
      Currently, pagemap_read() has three error and/or corner case handling
mistake.

 (1) If ppos parameter is wrong, mm refcount will be leak.
 (2) If count parameter is 0, mm refcount will be leak too.
 (3) If the current task is sleeping in kmalloc() and the system
     is out of memory and oom-killer kill the proc associated task,
     mm_refcount prevent the task free its memory. then system may
     hang up.

<Quote Hugh's explain why we shold call kmalloc() before get_mm()>

  check_mem_permission gets a reference to the mm.  If we
  __get_free_page after check_mem_permission, imagine what happens if the
  system is out of memory, and the mm we're looking at is selected for
  killing by the OOM killer: while we wait in __get_free_page for more
  memory, no memory is freed from the selected mm because it cannot reach
  exit_mmap while we hold that reference.

This patch fixes the above three.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jovi Zhang <bookjovi@gmail.com>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: Stephen Wilson <wilsons@start.ca>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      98bc93e5
    • K
      proc: put check_mem_permission after __get_free_page in mem_write · 30cd8903
      由 KOSAKI Motohiro 提交于 
      It whould be better if put check_mem_permission after __get_free_page in
mem_write, to be same as function mem_read.

Hugh Dickins explained the reason.

    check_mem_permission gets a reference to the mm.  If we __get_free_page
    after check_mem_permission, imagine what happens if the system is out
    of memory, and the mm we're looking at is selected for killing by the
    OOM killer: while we wait in __get_free_page for more memory, no memory
    is freed from the selected mm because it cannot reach exit_mmap while
    we hold that reference.
Reported-by: NJovi Zhang <bookjovi@gmail.com>
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NHugh Dickins <hughd@google.com>
Reviewed-by: NStephen Wilson <wilsons@start.ca>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      30cd8903
    • Y
      proc/stat: use defined macro KMALLOC_MAX_SIZE · a4dbf0ec
      由 Yuanhan Liu 提交于 
      There is a macro for the max size kmalloc can allocate, so use it instead
of a hardcoded number.
Signed-off-by: NYuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a4dbf0ec
    • M
      proc: constify status array · e130aa70
      由 Mike Frysinger 提交于 
      No need for this local array to be writable, so mark it const.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e130aa70
    • A
      fs/proc: convert to kstrtoX() · 0a8cb8e3
      由 Alexey Dobriyan 提交于 
      Convert fs/proc/ from strict_strto*() to kstrto*() functions.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0a8cb8e3
    • J
      mm: extract exe_file handling from procfs · 38646013
      由 Jiri Slaby 提交于 
      Setup and cleanup of mm_struct->exe_file is currently done in fs/proc/.
This was because exe_file was needed only for /proc/<pid>/exe.  Since we
will need the exe_file functionality also for core dumps (so core name can
contain full binary path), built this functionality always into the
kernel.

To achieve that move that out of proc FS to the kernel/ where in fact it
should belong.  By doing that we can make dup_mm_exe_file static.  Also we
can drop linux/proc_fs.h inclusion in fs/exec.c and kernel/fork.c.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      38646013
    • K
      mm: don't access vm_flags as 'int' · ca16d140
      由 KOSAKI Motohiro 提交于 
      The type of vma->vm_flags is 'unsigned long'. Neither 'int' nor
'unsigned int'. This patch fixes such misuse.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
[ Changed to use a typedef - we'll extend it to cover more cases
  later, since there has been discussion about making it a 64-bit
  type..                      - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ca16d140
  9. 25 5月, 2011 4 次提交
  11. 17 5月, 2011 1 次提交
  13. 11 5月, 2011 4 次提交
  15. 10 5月, 2011 1 次提交
    • M
      Don't lock guardpage if the stack is growing up · a09a79f6
      由 Mikulas Patocka 提交于 
      Linux kernel excludes guard page when performing mlock on a VMA with
down-growing stack. However, some architectures have up-growing stack
and locking the guard page should be excluded in this case too.

This patch fixes lvm2 on PA-RISC (and possibly other architectures with
up-growing stack). lvm2 calculates number of used pages when locking and
when unlocking and reports an internal error if the numbers mismatch.

[ Patch changed fairly extensively to also fix /proc/<pid>/maps for the
  grows-up case, and to move things around a bit to clean it all up and
  share the infrstructure with the /proc bits.

  Tested on ia64 that has both grow-up and grow-down segments  - Linus ]
Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Tested-by: NTony Luck <tony.luck@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a09a79f6
  17. 19 4月, 2011 1 次提交
  19. 31 3月, 2011 1 次提交
  21. 28 3月, 2011 1 次提交
  23. 24 3月, 2011 15 次提交