Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 28 8月, 2009 1 次提交
  3. 27 8月, 2009 1 次提交
    • T
      ALSA: Add debug module option · 36ce99c1
      由 Takashi Iwai 提交于 
      Add debug module option to snd core.
This controls the debug print level.  When CONFIG_SND_DEBUG_VERBOSE
is set, you can suppress the debug messages by giving or changing this
parameter to a lower value.  debug=0 means no debug messsages.
As default, it's set to the verbose level 2.

Since this option can be changed dynamically via sysfs file, you can
suppress the verbose debug messages on the fly, which wasn't possible
before.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      36ce99c1
  5. 05 6月, 2009 1 次提交
  7. 02 6月, 2009 1 次提交
    • J
      ALSA: Core - add snd_card_set_id() function · 10a8ebbb
      由 Jaroslav Kysela 提交于 
      Introduce snd_card_set_id() function to allow lowlevel drivers to set
default identification name for card slot. The function checks also
for identification name collisions and tries to create unique name.

Also, the snd_card_create() function is simplified, because this new
function is used. As bonus, proper name collision checks are evaluated
at the card create time.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      10a8ebbb
  9. 29 5月, 2009 1 次提交
  11. 22 5月, 2009 2 次提交
  13. 18 5月, 2009 2 次提交
    • M
      ASoC: Integrate bias management with DAPM power management · 452c5eaa
      由 Mark Brown 提交于 
      Rather than managing the bias level of the system based on if there is
an active audio stream manage it based on there being an active DAPM
widget. This simplifies the code a little, moving the power handling
into one place, and improves audio performance for bypass paths when no
playbacks or captures are active.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
      452c5eaa
    • M
      ASoC: Split DAPM power checks from sequencing of power changes · 6d3ddc81
      由 Mark Brown 提交于 
      DAPM has always applied any changes to the power state of widgets as soon
as it has determined that they are required. Instead of doing this store
all the changes that are required on lists of widgets to power up and
down, then iterate over those lists and apply the changes. This changes
the sequence in which changes are implemented, doing all power downs
before power ups and always using the up/down sequences (previously they
were only used when changes were due to DAC/ADC power events). The error
handling is also changed so that we continue attempting to power widgets
if some changes fail.

The main benefit of this is to allow future changes to do optimisations
over the whole power sequence and to reduce the number of walks of the
widget graph required to check the power status of widgets.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
      6d3ddc81
  15. 14 5月, 2009 1 次提交
  17. 06 5月, 2009 1 次提交
  19. 05 5月, 2009 2 次提交
  21. 02 5月, 2009 2 次提交
  23. 25 4月, 2009 1 次提交
  25. 23 4月, 2009 1 次提交
    • M
      ASoC: Add power supply widget to DAPM · 246d0a17
      由 Mark Brown 提交于 
      Many modern CODECs have shared resources on chip which must be enabled
for portions of the chip to work but which can be disabled at other times
in order to achieve power savings. Examples of such resources include
power supplies and some internal clocks.

Since these widgets are dependencies for the audio path but do not carry
audio signals they require slightly different handling to most widgets -
they do not contribute to the audio path and so should not be counted as
either inputs or outputs during path walks.

Cases where one supply provides a supply for another will require
additional work. There is also room for more optimisation of the graph
walking to avoid repeated checks for the same thing.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
      246d0a17
  27. 21 4月, 2009 3 次提交
  29. 15 4月, 2009 1 次提交
  31. 14 4月, 2009 1 次提交
  33. 13 4月, 2009 1 次提交
  35. 10 4月, 2009 1 次提交
  37. 08 4月, 2009 1 次提交
    • M
      ASoC: Provide core support for symmetric sample rates · 06f409d7
      由 Mark Brown 提交于 
      Many devices require symmetric configurations of capture and playback
data formats, often due to shared clocking but sometimes also due to
other shared playback and record configuration in the device. Start
providing core support for this by allowing the DAIs or the machine
to specify that the sample rates used should be kept symmetric.

A flag symmetric_rates is provided in the snd_soc_dai and
snd_soc_dai_link structures. If this is set in either of the DAIs or in
the machine then a constraint will be applied when a stream is already
open preventing any changes in sample rate.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
      06f409d7
  39. 30 3月, 2009 1 次提交
  41. 27 3月, 2009 3 次提交
  43. 18 3月, 2009 1 次提交
  45. 16 3月, 2009 1 次提交
  47. 11 3月, 2009 2 次提交
  49. 09 3月, 2009 5 次提交
  51. 05 3月, 2009 1 次提交
  53. 04 3月, 2009 1 次提交
    • L
      ASoC: Add GPIO support for jack reporting interface · ec67624d
      由 Lopez Cruz, Misael 提交于 
      Add GPIO support to jack reporting framework in ASoC using gpiolib calls.
The gpio support exports two new functions: snd_soc_jack_add_gpios and
snd_soc_jack_free_gpios.

Client drivers using gpio feature must pass an array of jack_gpio pins
belonging to a specific jack to the snd_soc_jack_add_gpios function. The
framework will request the gpios, set the data direction and request irq.
The framework will update power status of related jack_pins when an event on
the gpio pins comes according to the reporting bits defined for each gpio.

All gpio resources allocated when adding jack_gpio pins can be released
using snd_soc_jack_free_gpios function.
Signed-off-by: NMisael Lopez Cruz <x0052729@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
      ec67624d