This patch moves cpufreq driver of ARM based tegra platform to drivers/cpufreq.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Normally we keep drivers in alphabetical inside Kconfig and Makefile and over
time this was broken for ARM cpufreq drivers. Fix it.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

big LITTLE is ARM's new Architecture focussing power/performance needs of modern
world. More information about big LITTLE can be found here:

http://www.arm.com/products/processors/technologies/biglittleprocessing.php
http://lwn.net/Articles/481055/

In order to keep cpufreq support for all big LITTLE platforms simple/generic,
this patch tries to add a generic cpufreq driver layer for all big LITTLE
platforms.

The driver is divided into two parts:
- Core driver: Generic and shared across all big LITTLE SoC's
- Glue drivers: Per platform drivers providing ops to the core driver

This patch adds in a generic glue driver which would extract information from
Device Tree.

Future SoC's can either reuse the DT glue or write their own depending on the
need.
Signed-off-by: NSudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Some assignments of policy-> min/max/cur/cpuinfo.min_freq/cpuinfo.max_freq
aren't required as part of it is done by cpufreq driver or cpufreq core.

Remove them.

At some places we merge multiple lines together too.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Cpufreq core checks the range of target_freq before calling driver->target() and
so we don't need to do it again.

Remove it.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

cpufreq layer doesn't call cpufreq driver's callback for any offline
CPU and so checking that isn't useful.

Lets get rid of it.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

policy->cpus contains all online cpus that have single shared clock line. And
their frequencies are always updated together.

Many SMP system's cpufreq drivers take care of this in individual drivers but
the best place for this code is in cpufreq core.

This patch modifies cpufreq_notify_transition() to notify frequency change for
all cpus in policy->cpus and hence updates all users of this API.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently we are simply returning from target() if we encounter some error after
broadcasting CPUFREQ_PRECHANGE notifier. Which looks to be wrong as others might
depend on POSTCHANGE notifier for their functioning.

So, better broadcast CPUFREQ_POSTCHANGE notifier for these failure cases too,
but with old frequency.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

It is not possible for init() to be called for any cpu other than cpu0. During
bootup whatever cpu is used to boot system will be assigned as cpu0. And later
on policy->cpu can only change if we hotunplug all cpus first and then hotplug
them back in different order, which isn't possible (system requires atleast one
cpu to be up always :)).

Though I can see one situation where policy->cpu can be different then zero.
- Hot-unplug cpu 0.
- rmmod cpufreq-cpu0 module
- insmod it back
- hotplug cpu 0 again.

Here, policy->cpu would be different. But the driver doesn't have any dependency
on cpu0 as such. We don't mind which cpu of a system is policy->cpu and so this
check is just not required.

Remove it.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Use an inline function to evaluate freq_target to avoid duplicate code.

Also, define a macro for the default frequency step.
Signed-off-by: NStratos Karafotis <stratosk@semaphore.gr>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Convert all uses of devm_request_and_ioremap() to the newly introduced
devm_ioremap_resource() which provides more consistent error handling.

devm_ioremap_resource() provides its own error messages so all explicit
error messages can be removed from the failure code paths.
Signed-off-by: NSilviu-Mihai Popescu <silviupopescu1990@gmail.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

clk_round_rate() returns singed value which was assigned to an unsigned
variable.
So it can't be checked for negative.
Signed-off-by: NJonghwan Choi <jhbird.choi@samsung.com>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

When we evaluate the CPU load for frequency decrease we have to compare
the load against down_threshold. There is no need to subtract 10 points
from down_threshold.

Instead, we have to use the default down_threshold or user's selection
unmodified.
Signed-off-by: NStratos Karafotis <stratosk@semaphore.gr>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

sampling_down_factor tunable is unused since commit
8e677ce8 (4 years ago).

This patch restores the original functionality and documents the
tunable.
Signed-off-by: NStratos Karafotis <stratosk@semaphore.gr>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently we always calculate the CPU iowait time and add it to idle time.
If we are in ondemand and we use io_is_busy, we re-calculate iowait time
and we subtract it from idle time.

With this patch iowait time is calculated only when necessary avoiding
the double call to get_cpu_iowait_time_us. We use a parameter in
function get_cpu_idle_time to distinguish when the iowait time will be
added to idle time or not, without the need of keeping the prev_io_wait.
Signed-off-by: NStratos Karafotis <stratosk@semaphore.gr>
Acked-by: NViresh Kumar <viresh.kumar@linaro.,org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The relation should be CPUFREQ_RELATION_L to find optimal frequency
when decreasing.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

If we're on the lowest frequency, no need to calculate new freq.
Break out even earlier in this case.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Following patch has introduced per cpu timers or works for ondemand and
conservative governors.

	commit 2abfa876
	Author: Rickard Andersson <rickard.andersson@stericsson.com>
	Date:   Thu Dec 27 14:55:38 2012 +0000

	    cpufreq: handle SW coordinated CPUs

This causes additional unnecessary interrupts on all cpus when the load is
recently evaluated by any other cpu. i.e. When load is recently evaluated by cpu
x, we don't really need any other cpu to evaluate this load again for the next
sampling_rate time.

Some sort of code is present to avoid that but we are still getting timer
interrupts for all cpus. A good way of avoiding this would be to modify delays
for all cpus (policy->cpus) whenever any cpu has evaluated load.

This patch does this change and some related code cleanup.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Because we have per cpu timer now, we check if we need to evaluate load again or
not (In case it is recently evaluated). Here the 2nd cpu which got timer
interrupt updates core_dbs_info->sample_type irrespective of load evaluation is
required or not. Which is wrong as the first cpu is dependent on this variable
set to an older value.

Moreover it would be best in this case to schedule 2nd cpu's timer to
sampling_rate instead of freq_lo or hi as that must be managed by the other cpu.
In case the other cpu idles in between then also we wouldn't loose much power.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently MIN_LATENCY_MULTIPLIER is set defined as 100 and so on a system with
transition latency of 1 ms, the minimum sampling time comes to be around 100 ms.
That is quite big if you want to get better performance for your system.

Redefine MIN_LATENCY_MULTIPLIER to 20 so that we can support 20ms sampling rate
for such platforms.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently, there can't be multiple instances of single governor_type.
If we have a multi-package system, where we have multiple instances
of struct policy (per package), we can't have multiple instances of
same governor. i.e. We can't have multiple instances of ondemand
governor for multiple packages.

Governors directory in sysfs is created at /sys/devices/system/cpu/cpufreq/
governor-name/. Which again reflects that there can be only one
instance of a governor_type in the system.

This is a bottleneck for multicluster system, where we want different
packages to use same governor type, but with different tunables.

This patch uses the infrastructure provided by earlier patch and
implements init/exit routines for ondemand and conservative
governors.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently, there can't be multiple instances of single governor_type.
If we have a multi-package system, where we have multiple instances
of struct policy (per package), we can't have multiple instances of
same governor. i.e. We can't have multiple instances of ondemand
governor for multiple packages.

Governors directory in sysfs is created at /sys/devices/system/cpu/cpufreq/
governor-name/. Which again reflects that there can be only one
instance of a governor_type in the system.

This is a bottleneck for multicluster system, where we want different
packages to use same governor type, but with different tunables.

This patch is inclined towards providing this infrastructure. Because
we are required to allocate governor's resources dynamically now, we
must do it at policy creation and end. And so got
CPUFREQ_GOV_POLICY_INIT/EXIT.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This eliminates the contention I am seeing in __cpufreq_cpu_get.
It also nicely stages the lock to be replaced by the rcu.
Signed-off-by: NNathan Zimmer <nzimmer@sgi.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

On some hardware configurations we have got the request line with the offset.
The patch introduces convert_slave_id() helper for that cases. The request line
base is came from the driver data provided by the platform_device_id table.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

As reported by Wu Fengguang's build robot tracking sparse warnings, the
dma_spec arguments in the dw_dma_xlate are already byte swapped on
little-endian platforms and must not get swapped again. This code is
currently not used anywhere, but will be used in Linux 3.10 when the
ARM SPEAr platform starts using the generic DMA DT binding.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

A result of ENOENT from a read request for an object that's part of
an rbd image indicates that there is a hole in that portion of the
image.  Similarly, a short read for such an object indicates that
the remainder of the read should be interpreted a full read with
zeros filling out the end of the request.

This behavior is not correct for objects that are not backing rbd
image data.  Currently rbd_img_obj_request_callback() assumes it
should be done for all objects.

Change rbd_img_obj_request_callback() so it only does this zeroing
for image objects.  Encapsulate that special handling in its own
function.  Add an assertion that the image object request is a bio
request, since we assume that (and we currently don't support any
other types).

This resolves a problem identified here:
    http://tracker.ceph.com/issues/4559

The regression was introduced by bf0d5f50.
Reported-by: NDan van der Ster <dan@vanderster.com>
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-off-by: NSage Weil <sage@inktank.com>

This patch fixes a regression introduced in v3.8-rc1 code where a failed
target_check_reservation() check in target_setup_cmd_from_cdb() was causing
an incorrect SAM_STAT_GOOD status to be returned during a WRITE operation
performed by an unregistered / unreserved iscsi initiator port.

This regression is only effecting iscsi-target due to a special case check
for TCM_RESERVATION_CONFLICT within iscsi_target_erl1.c:iscsit_execute_cmd(),
and was still correctly disallowing WRITE commands from backend submission
for unregistered / unreserved initiator ports, while returning the incorrect
SAM_STAT_GOOD status due to the missing SAM_STAT_RESERVATION_CONFLICT
assignment.

This regression was first introduced with:

commit de103c93
Author: Christoph Hellwig <hch@lst.de>
Date:   Tue Nov 6 12:24:09 2012 -0800

    target: pass sense_reason as a return value

Go ahead and re-add the missing SAM_STAT_RESERVATION_CONFLICT assignment
during a target_check_reservation() failure, so that iscsi-target code
sends the correct SCSI status.

All other fabrics using target_submit_cmd_*() with a RESERVATION_CONFLICT
call to transport_generic_request_failure() are not effected by this bug.
Reported-by: NJeff Leung <jleung@curriegrad2004.ca>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch adds a VHOST_SCSI_FEATURES mask minus VIRTIO_RING_F_EVENT_IDX
so that vhost-scsi-pci userspace will strip this feature bit once
GET_FEATURES reports it as being unsupported on the host.

This is to avoid a bug where ->handle_kicks() are missed when EVENT_IDX
is enabled by default in userspace code.

(mst: Rename to VHOST_SCSI_FEATURES + add comment)
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NAsias He <asias@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

It enhances the driver for FTDI-based USB serial adapters
to recognize Mitsubishi Electric Corp. USB/RS422 Converters
as FT232BM chips and support them.
https://search.meau.com/?q=FX-USB-AWSigned-off-by: NKonstantin Holoborodko <klh.kernel@gmail.com>
Tested-by: NKonstantin Holoborodko <klh.kernel@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In unmask_evtchn(), when the mask bit is cleared after testing for
pending and the event becomes pending between the test and clear, then
the upcall will not become pending and the event may be lost or
delayed.

Avoid this by always clearing the mask bit before checking for
pending.  If a hypercall is needed, remask the event as
EVTCHNOP_unmask will only retrigger pending events if they were
masked.

This fixes a regression introduced in 3.7 by
b5e57923 (xen/events: fix
unmask_evtchn for PV on HVM guests) which reordered the clear mask and
check pending operations.

Changes in v2:
- set mask before hypercall.

Cc: stable@vger.kernel.org
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

With the Xen ACPI stub code (CONFIG_XEN_STUB=y) enabled, the power
C and P states are no longer uploaded to the hypervisor.

The reason is that the Xen CPU hotplug code: xen-acpi-cpuhotplug.c
and the xen-acpi-stub.c register themselves as the "processor" type object.

That means the generic processor (processor_driver.c) stops
working and it does not call (acpi_processor_add) which populates the

         per_cpu(processors, pr->id) = pr;

structure. The 'pr' is gathered from the acpi_processor_get_info function
which does the job of finding the C-states and figuring out PBLK address.

The 'processors->pr' is then later used by xen-acpi-processor.c (the one that
uploads C and P states to the hypervisor). Since it is NULL, we end
skip the gathering of _PSD, _PSS, _PCT, etc and never upload the power
management data.

The end result is that enabling the CONFIG_XEN_STUB in the build means that
xen-acpi-processor is not working anymore.

This temporary patch fixes it by marking the XEN_STUB driver as
BROKEN until this can be properly fixed.

CC: jinsong.liu@intel.com
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The current lpc32xx_defconfig breaks like this, caused by recent phy
restructuring:

  LD      init/built-in.o
drivers/built-in.o: In function `usb_hcd_nxp_probe':
drivers/usb/host/ohci-nxp.c:224: undefined reference to `isp1301_get_client'
drivers/built-in.o: In function `lpc32xx_udc_probe':
drivers/usb/gadget/lpc32xx_udc.c:3104: undefined reference to
`isp1301_get_client' distcc[27867] ERROR: compile (null) on localhost failed
make: *** [vmlinux] Error 1

Caused by 1c208881 (usb: Makefile: fix
drivers/usb/phy/ Makefile entry)

This patch fixes this by selecting USB_OTG_UTILS in Kconfig which
causes the phy driver to be built again.
Signed-off-by: NRoland Stigge <stigge@antcom.de>
Acked-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit "HID: multitouch: use the callback "report" instead..." breaks the
buttons of touchpads following the HID multitouch specification.
The buttons were emmitted through hid-input, but as now the events
are generated only in hid-multitouch, the buttons are not emmitted anymore.

The input_event() call is far much simpler than the hid-input one as
many of the different tests do not apply to multitouch touchpads.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

There is a bug introduced with commit 27c2127a that causes
devices which are hot unplugged and then hot-replugged to
not have per-device dma_ops set. This causes these devices
to not function correctly. Fixed with this patch.

Cc: stable@vger.kernel.org
Reported-by: NAndreas Degert <andreas.degert@googlemail.com>
Signed-off-by: NJoerg Roedel <joro@8bytes.org>

vcs_poll_data_free() calls unregister_vt_notifier(), which calls
atomic_notifier_chain_unregister(), which calls synchronize_rcu().
Do it *after* we'd dropped ->f_lock.

Cc: stable@vger.kernel.org (all kernels since 2.6.37)
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

During merging the PCI tree with the PM/ACPI tree, Linus noticed
that we don't use the same lock using patten about ACPI PCI root as
acpiphp.

Here apply the same locking patten, and we need to execute
acpi_bus_hot_remove_device() via acpi_os_hotplug_execute()
as it also holds acpi_scan_lock.

[rjw: Changelog]
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
No-objection-from: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

In Table 18-289, ACPI5.0 SPEC, the error data length in CPER
Generic Error Data Entry can be 0, which means this generic
error data entry can have only one header. So fix the check
conditon for it.
Signed-off-by: NChen Gong <gong.chen@linux.intel.com>
Reviewed-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Add Sony Vaio VGN-FW21M to the device blacklist in
drivers/acpi/sleep.c.

Fixes suspend/resume on this device (device no longer reboots
instead of resuming).

References: https://bugzilla.kernel.org/show_bug.cgi?id=55001Signed-off-by: NFabio Valentini <fafatheone@gmail.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>