- 06 12月, 2012 8 次提交
-
-
由 Michael S. Tsirkin 提交于
For short packets zerocopy mode adds overhead of managing heads which isn't necessary: we could simly update used ring directly same as with zerocopy disabled. Things seem to run a bit faster if we detect and bypass head management when zcopy isn't used. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Michael S. Tsirkin 提交于
When memory map changes, we need to flush outstanding DMAs as they might in theory reference old memory addresses. To do this simply stop initiating new DMAs and wait for ubufs ref count to drop to 0. Afterwards reset the count back to 1. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Michael S. Tsirkin 提交于
vring changes already do a flush internally where appropriate, so we do not need a second flush. It's currently not very expensive but a follow-up patch makes flush more heavy-weight, so remove the extra flush here to avoid regressing performance if call or kick fds are changed on data path. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Eddie Wai 提交于
If the initiator and target try to close the connection at about the same time, there is a race condition in the termination sequence for bnx2x. Fix the problem by waiting for the remote termination to complete before deleting the Connection ID. This will prevent the firmware assert. Update version to 2.5.15. Signed-off-by: NEddie Wai <eddie.wai@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Without the reset, reloading the cnic driver can cause the iSCSI Event Queue to be out of sync with the driver and cause intermittent crash. Signed-off-by: NMichael Chan <mchan@broadcom.com> Acked-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephan Gatzka 提交于
Added functions for ack_interrupt and config_intr. Tested on an mpc5200b powerpc board. Signed-off-by: NStephan Gatzka <stephan.gatzka@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Gallatin 提交于
- convert remaining htonl/ntohl +__raw_read/__raw_writel to swab32 + readl/writel - add missing __iomem qualifier in myri10ge_open() - fix dubious: x & !y warning by switching from logical to bitwise not The swab32 conversion fixes a bug in myri10ge_led() where big-endian machines would write the wrong pattern. The only remaining warning (lock context imbalance) is due to the use of __netif_tx_trylock(), and cannot easily be fixed. Signed-off-by: NAndrew Gallatin <gallatin@myri.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Glauber 提交于
The 3com driver for 3c59x requires ioport_map. Since not all architectures support IO port mapping make 3c59x dependent on HAS_IOPORT. Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 12月, 2012 13 次提交
-
-
由 Wei Yongjun 提交于
Use for_each_pci_dev to simplify the code. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Add qlcnic prefix to qlcnic driver module parameters. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Refactor 82xx driver to support new adapter Update routines to support variable number of NIC partitions Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Cleanup get board information API. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Refactor 82xx driver to support new adapter Update PCI and hardware access routines Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Move HW specific data to a seperate structure as part of refactoring 82xx adapter driver. Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Add 82xx adapter ID check before 82xx specific operations as part of refactoring the driver to enable support for new adapter. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch implements the hardware timestamping as described in Documentation/networking/timestamping.txt Update version to 3.128. Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch implements the SIOCSHWTSTAMP ioctl as described in Documentation/networking/timestamping.txt [Removed HWTSTAMP_FILTER_ALL handling by returning -ERANGE based on input from Richard Cochran.] Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch adds the ptp_caps structure, ptp api implementation, reference clock read and register/unregister functions. All the basic clock operations as described in Documentation/ptp/ptp.txt are supported. Frequency adjustment is performed using hardware with a 24 bit accumulator and a programmable correction value. On each clk, the correction value gets added to the accumulator and when it overflows, the time counter is incremented/decremented and the accumulator reset. So conversion from ppb to correction value is ppb * (1 << 24) / 1000000000 [Re-organized to put the ptp_clock_info struct declaration in one patch, added ptp_clock_info.name, and added locking to tg3_ptp_adjtime() based on input from Richard Cochran.] Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch adds code to write the reference clock. If a chip reset is performed, the hwclock is reinitialized with the adjusted kernel time Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nithin Nayak Sujir 提交于
Every caller holds tp->lock when calling tg3_netif_start() except tg3_io_resume(). Fix it so that it is all consistent. The subsequent PTP patches add tg3_ptp_resume() to tg3_netif_start() and the tp->lock is required. Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 12月, 2012 19 次提交
-
-
由 Michael S. Tsirkin 提交于
Historically tun supported two modes of operation: - in default mode, a small number of packets would get queued at the device, the rest would be queued in qdisc - in one queue mode, all packets would get queued at the device This might have made sense up to a point where we made the queue depth for both modes the same and set it to a huge value (500) so unless the consumer is stuck the chance of losing packets is small. Thus in practice both modes behave the same, but the default mode has some problems: - if packets are never consumed, fragments are never orphaned which cases a DOS for sender using zero copy transmit - overrun errors are hard to diagnose: fifo error is incremented only once so you can not distinguish between userspace that is stuck and a transient failure, tcpdump on the device does not show any traffic Userspace solves this simply by enabling IFF_ONE_QUEUE but there seems to be little point in not doing the right thing for everyone, by default. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Cc: Alex Duyck <alexander.h.duyck@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Tushar Dave <tushar.n.dave@intel.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Kevin Curtis <kevin.curtis@farsite.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: VMware, Inc. <pv-drivers@vmware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: linux-hippi@sunsite.dk Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-