Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 29 6月, 2016 1 次提交
    • D
      bpf, perf: delay release of BPF prog after grace period · ceb56070
      由 Daniel Borkmann 提交于 
      Commit dead9f29 ("perf: Fix race in BPF program unregister") moved
destruction of BPF program from free_event_rcu() callback to __free_event(),
which is problematic if used with tail calls: if prog A is attached as
trace event directly, but at the same time present in a tail call map used
by another trace event program elsewhere, then we need to delay destruction
via RCU grace period since it can still be in use by the program doing the
tail call (the prog first needs to be dropped from the tail call map, then
trace event with prog A attached destroyed, so we get immediate destruction).

Fixes: dead9f29 ("perf: Fix race in BPF program unregister")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Cc: Jann Horn <jann@thejh.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ceb56070
  3. 28 6月, 2016 1 次提交
  5. 24 6月, 2016 1 次提交
  7. 23 6月, 2016 1 次提交
  9. 20 6月, 2016 1 次提交
  11. 17 6月, 2016 2 次提交
  13. 16 6月, 2016 3 次提交
    • A
      bpf: fix matching of data/data_end in verifier · 19de99f7
      由 Alexei Starovoitov 提交于 
      The ctx structure passed into bpf programs is different depending on bpf
program type. The verifier incorrectly marked ctx->data and ctx->data_end
access based on ctx offset only. That caused loads in tracing programs
int bpf_prog(struct pt_regs *ctx) { .. ctx->ax .. }
to be incorrectly marked as PTR_TO_PACKET which later caused verifier
to reject the program that was actually valid in tracing context.
Fix this by doing program type specific matching of ctx offsets.

Fixes: 969bf05e ("bpf: direct packet access")
Reported-by: NSasha Goldshtein <goldshtn@gmail.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      19de99f7
    • E
      gre: fix error handler · e582615a
      由 Eric Dumazet 提交于 
      1) gre_parse_header() can be called from gre_err()

   At this point transport header points to ICMP header, not the inner
header.

2) We can not really change transport header as ipgre_err() will later
assume transport header still points to ICMP header (using icmp_hdr())

3) pskb_may_pull() logic in gre_parse_header() really works
  if we are interested at zone pointed by skb->data

4) As Jiri explained in commit b7f8fe25 ("gre: do not pull header in
ICMP error processing") we should not pull headers in error handler.

So this fix :

A) changes gre_parse_header() to use skb->data instead of
skb_transport_header()

B) Adds a nhs parameter to gre_parse_header() so that we can skip the
not pulled IP header from error path.
  This offset is 0 for normal receive path.

C) remove obsolete IPV6 includes
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Jiri Benc <jbenc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e582615a
    • J
      net: Don't forget pr_fmt on net_dbg_ratelimited for CONFIG_DYNAMIC_DEBUG · daddef76
      由 Jason A. Donenfeld 提交于 
      The implementation of net_dbg_ratelimited in the CONFIG_DYNAMIC_DEBUG
case was added with 2c94b537 ("net: Implement net_dbg_ratelimited() for
CONFIG_DYNAMIC_DEBUG case"). The implementation strategy was to take the
usual definition of the dynamic_pr_debug macro, but alter it by adding a
call to "net_ratelimit()" in the if statement. This is, in fact, the
correct approach.

However, while doing this, the author of the commit forgot to surround
fmt by pr_fmt, resulting in unprefixed log messages appearing in the
console. So, this commit adds back the pr_fmt(fmt) invocation, making
net_dbg_ratelimited properly consistent across DEBUG, no DEBUG, and
DYNAMIC_DEBUG cases, and bringing parity with the behavior of
dynamic_pr_debug as well.

Fixes: 2c94b537 ("net: Implement net_dbg_ratelimited() for CONFIG_DYNAMIC_DEBUG case")
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Cc: Tim Bingham <tbingham@akamai.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      daddef76
  15. 15 6月, 2016 1 次提交
    • P
      netfilter: nf_tables: reject loops from set element jump to chain · 8588ac09
      由 Pablo Neira Ayuso 提交于 
      Liping Zhang says:

"Users may add such a wrong nft rules successfully, which will cause an
endless jump loop:

  # nft add rule filter test tcp dport vmap {1: jump test}

This is because before we commit, the element in the current anonymous
set is inactive, so osp->walk will skip this element and miss the
validate check."

To resolve this problem, this patch passes the generation mask to the
walk function through the iter container structure depending on the code
path:

1) If we're dumping the elements, then we have to check if the element
   is active in the current generation. Thus, we check for the current
   bit in the genmask.

2) If we're checking for loops, then we have to check if the element is
   active in the next generation, as we're in the middle of a
   transaction. Thus, we check for the next bit in the genmask.

Based on original patch from Liping Zhang.
Reported-by: NLiping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Tested-by: NLiping Zhang <liping.zhang@spreadtrum.com>
      8588ac09
  17. 11 6月, 2016 1 次提交
    • B
      net: diag: add missing declarations · c3ec5e5c
      由 Ben Dooks 提交于 
      The functions inet_diag_msg_common_fill and inet_diag_msg_attrs_fill
seem to have been missed from the include/linux/inet_diag.h header
file. Add them to fix the following warnings:

net/ipv4/inet_diag.c:69:6: warning: symbol 'inet_diag_msg_common_fill' was not declared. Should it be static?
net/ipv4/inet_diag.c:108:5: warning: symbol 'inet_diag_msg_attrs_fill' was not declared. Should it be static?
Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c3ec5e5c
  19. 10 6月, 2016 5 次提交
  21. 08 6月, 2016 3 次提交
  23. 07 6月, 2016 4 次提交
  25. 06 6月, 2016 2 次提交
    • M
      ipvs: update real-server binding of outgoing connections in SIP-pe · 3ec10d3a
      由 Marco Angaroni 提交于 
      Previous patch that introduced handling of outgoing packets in SIP
persistent-engine did not call ip_vs_check_template() in case packet was
matching a connection template. Assumption was that real-server was
healthy, since it was sending a packet just in that moment.

There are however real-server fault conditions requiring that association
between call-id and real-server (represented by connection template)
gets updated. Here is an example of the sequence of events:
  1) RS1 is a back2back user agent that handled call-id1 and call-id2
  2) RS1 is down and was marked as unavailable
  3) new message from outside comes to IPVS with call-id1
  4) IPVS reschedules the message to RS2, which becomes new call handler
  5) RS2 forwards the message outside, translating call-id1 to call-id2
  6) inside pe->conn_out() IPVS matches call-id2 with existing template
  7) IPVS does not change association call-id2 <-> RS1
  8) new message comes from client with call-id2
  9) IPVS reschedules the message to a real-server potentially different
     from RS2, which is now the correct destination

This patch introduces ip_vs_check_template() call in the handling of
outgoing packets for SIP-pe. And also introduces a second optional
argument for ip_vs_check_template() that allows to check if dest
associated to a connection template is the same dest that was identified
as the source of the packet. This is to change the real-server bound to a
particular call-id independently from its availability status: the idea
is that it's more reliable, for in->out direction (where internal
network can be considered trusted), to always associate a call-id with
the last real-server that used it in one of its messages. Think about
above sequence of events where, just after step 5, RS1 returns instead
to be available.

Comparison of dests is done by simply comparing pointers to struct
ip_vs_dest; there should be no cases where struct ip_vs_dest keeps its
memory address, but represent a different real-server in terms of
ip-address / port.

Fixes: 39b97223 ("ipvs: handle connections started by real-servers")
Signed-off-by: NMarco Angaroni <marcoangaroni@gmail.com>
Acked-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NSimon Horman <horms@verge.net.au>
      3ec10d3a
    • E
      devpts: Make each mount of devpts an independent filesystem. · eedf265a
      由 Eric W. Biederman 提交于 
      The /dev/ptmx device node is changed to lookup the directory entry "pts"
in the same directory as the /dev/ptmx device node was opened in.  If
there is a "pts" entry and that entry is a devpts filesystem /dev/ptmx
uses that filesystem.  Otherwise the open of /dev/ptmx fails.

The DEVPTS_MULTIPLE_INSTANCES configuration option is removed, so that
userspace can now safely depend on each mount of devpts creating a new
instance of the filesystem.

Each mount of devpts is now a separate and equal filesystem.

Reserved ttys are now available to all instances of devpts where the
mounter is in the initial mount namespace.

A new vfs helper path_pts is introduced that finds a directory entry
named "pts" in the directory of the passed in path, and changes the
passed in path to point to it.  The helper path_pts uses a function
path_parent_directory that was factored out of follow_dotdot.

In the implementation of devpts:
 - devpts_mnt is killed as it is no longer meaningful if all mounts of
   devpts are equal.
 - pts_sb_from_inode is replaced by just inode->i_sb as all cached
   inodes in the tty layer are now from the devpts filesystem.
 - devpts_add_ref is rolled into the new function devpts_ptmx.  And the
   unnecessary inode hold is removed.
 - devpts_del_ref is renamed devpts_release and reduced to just a
   deacrivate_super.
 - The newinstance mount option continues to be accepted but is now
   ignored.

In devpts_fs.h definitions for when !CONFIG_UNIX98_PTYS are removed as
they are never used.

Documentation/filesystems/devices.txt is updated to describe the current
situation.

This has been verified to work properly on openwrt-15.05, centos5,
centos6, centos7, debian-6.0.2, debian-7.9, debian-8.2, ubuntu-14.04.3,
ubuntu-15.10, fedora23, magia-5, mint-17.3, opensuse-42.1,
slackware-14.1, gentoo-20151225 (13.0?), archlinux-2015-12-01.  With the
caveat that on centos6 and on slackware-14.1 that there wind up being
two instances of the devpts filesystem mounted on /dev/pts, the lower
copy does not end up getting used.
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg KH <greg@kroah.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Jann Horn <jann@thejh.net>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      eedf265a
  27. 04 6月, 2016 1 次提交
  29. 03 6月, 2016 3 次提交
  31. 02 6月, 2016 2 次提交
  33. 01 6月, 2016 5 次提交
  35. 31 5月, 2016 2 次提交
  37. 30 5月, 2016 1 次提交