- 08 2月, 2006 1 次提交
-
-
由 Jens Axboe 提交于
The softirq rq completion handler needs to save/restore interrupt flags appropriately. Signed-off-by: NJens Axboe <axboe@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 2月, 2006 31 次提交
-
-
由 Adrian Bunk 提交于
The at76c651 and tda80xx frontends are currently completely unused, IOW their only effect is making the kernel larger for people accitentially enabling them. The current in-kernel drivers differ from the drivers at cvs.tuxbox.org, and re-adding them when parts of the dbox2 project get merged should be trivial. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Dave Jones 提交于
Whoops. kobject_register failed for hexium HV-PCI6/Orion (-13) [<c01d3eb6>] kobject_register+0x31/0x47 [<c023a996>] bus_add_driver+0x4a/0xfd [<c01de3c1>] __pci_register_driver+0x82/0xa4 [<d083400a>] hexium_init_module+0xa/0x47 [hexium_orion] [<c013bdae>] sys_init_module+0x167b/0x1822 [<c01633f7>] do_sync_read+0xb8/0xf3 [<c0133fa3>] autoremove_wake_function+0x0/0x2d [<c0145390>] audit_syscall_entry+0x118/0x13f [<c0106ae2>] do_syscall_trace+0x104/0x14a [<c0103d21>] syscall_call+0x7/0xb slashes in kobject names aren't allowed. Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Some symbols at cx88-alsa were global. Making those static. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Patrick Boettcher 提交于
- When a firmware was downloaded dvb_usb_device_init returns NULL for the dvb_usb_device, then nothing should be done with that pointer and device, because it will re-enumerate. - A new firmware should be used with digitv devices. - It should make "slave"-devices work and others, too. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Patrick Boettcher 提交于
Reassigning function pointers in a static led to infinite loops when using multiple VP7045-based device at the same time on one system. Using kmalloc'd copies for reassignments is better. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Use the parallel transport function of the MT352 demodulator in TH7579 and LGZ201 -based FusionHDTV Bluebird usb boxes. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Chris Pascoe 提交于
Use the parallel transport function of the MT352 in USB demodulator of the Dual Digital board. Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Oliver Endriss 提交于
support for Galaxis DVB-S rev1.3 (subsystem 13c2:0004) Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Markus Rechberger 提交于
fixed i2c return value, conversion mdelay to msleep Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
South Korea uses NTSC-M but with A2 audio instead of BTSC. Several audio chips need this information in order to set the correct audio processing registers. Acked-by: NMauro Carvalho Chehab <mauro_chehab@yahoo.com.br> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Marco Manenti 提交于
add IR support to KWorld DVB-T (cx22702-based) Signed-off-by: NMarco Manenti <marco_manenti@colman.it> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Manu Abraham 提交于
With DVB drivers enabled snd_87x (ALSA) don't detect. Signed-off-by: NManu Abraham <manu@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Markus Rechberger 提交于
- added signal detection support to tvp5150 Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Marcin Rudowski 提交于
Apparently, having the number of lines fixed at 4 reduces (or even kills) the buzz found in NICAM stereo with analog sound. Signed-off-by: NMarcin Rudowski <mar_rud@poczta.onet.pl> Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- rename DVB_USB_CXUSB one-liner description to: Conexant USB2.0 hybrid reference design support. - with the addition of bluebird support to dvb-usb-cxusb, it now depends on lgdt330x and mt352 modules. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
Make the whole netdevices menu depend on NET, rather than having an empty submenu when networking is disabled. Indeed, almost the whole body of the menu was surrounded by if NETDEVICES, and what was outside depended on NETCONSOLE which is inside the menu. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Andrew Morton 提交于
drivers/net/tulip/uli526x.c: In function `__check_mode': drivers/net/tulip/uli526x.c:1693: warning: return from incompatible pointer type Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Kumar Gala 提交于
Fixed sparse warnings mainly due to lack of __iomem. Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Alexey Dobriyan 提交于
It returns a pointer. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Luiz Fernando Capitulino 提交于
drivers/net/bonding/bond_sysfs.c:263:27: warning: Using plain integer as NULL pointer drivers/net/bonding/bond_sysfs.c:998:26: warning: Using plain integer as NULL pointer drivers/net/bonding/bond_sysfs.c:1126:26: warning: Using plain integer as NULL pointer Signed-off-by: NLuiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Jay Vosburgh 提交于
Add NETIF_F_TSO (NETIF_F_UFO) to BOND_INTERSECT_FEATURES so that it can be used by a bonding device iff all its slave devices support TSO (UFO). Signed-off-by: NArthur Kepner <akepner@sgi.com> Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Increase version, and get rid of out-dated comment. Speed setting has worked for quite a while. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
This hardware supports Message Signaled interrupts. When setting up, use software interrupt to check for bad hardware. Signed-off-by: Stephen Hemminger <shemminger @osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
The sky2 interrupt can be used to add entropy. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Move the interrupt clear to before processing, this avoids a possible races with status delaying. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Using the sky2 driver with bonding can result in oopses related to reinitializing the PHY when the MAC address is changed (which bonding is wont to do). This patch changes sky2_set_mac_address to take less drastic measures. This is analagous to the skge patch here: http://lkml.org/lkml/2005/9/29/399 which fixed the issue here: http://bugzilla.kernel.org/show_bug.cgi?id=5271Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
This fixes setting rx_coalesce_usecs_irq via ethtool in sky2. The write was directed to the wrong register. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NCarl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
There were bugs in mmconfig access to PCI space, up to and include 2.6.16-rc1. These prevented the sky2 driver from being able to clear PCI express errors. This patch makes the driver check (during probe), for errors in PCI config access and fail. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Fix suspend/resume for sky2. The status ring was getting reallocated and a bunch of other mistakes. Also, check return from power_state on resume. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Lennert Buytenhek 提交于
sis900 defines 'cfgpmcsr' as an I/O space register, but CFGPMCSR is in fact a config space register, and there is no register at offset 0x44 in I/O space, so delete the enum. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Jesse Brandeburg 提交于
e100 seems to have had a long standing bug where e100_init_hw was being called when it should not have been. This caused a panic due to recent changes that rely on correct set up in the driver, and more robust error paths. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 06 2月, 2006 8 次提交
-
-
由 Herbert Xu 提交于
When we pull the PPP protocol off the skb, we forgot to update the hardware RX checksum. This may lead to messages such as dsl0: hw csum failure. Similarly, we need to clear the hardware checksum flag when we use the existing packet to store the decompressed result. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Greg KH 提交于
I thought we had fixed up all non-gpl USB drivers, and was wrong to do this. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Osterlund 提交于
Allocate memory for read-gathering at open time, when it is known just how much memory is needed. This avoids wasting kernel memory when the real packet size is smaller than the maximum packet size supported by the driver. This is always the case when using DVD discs. Signed-off-by: NPeter Osterlund <petero2@telia.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
Unless the help text is outdated, this seems to be logical. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NPeter Osterlund <petero2@telia.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Osterlund 提交于
The version information is not useful for a driver that is maintained in Linus' kernel tree. Signed-off-by: NPeter Osterlund <petero2@telia.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Phillip Susi 提交于
The pktcdvd driver was using an 8 bit field to store the packet length obtained from the disc track info. This causes it to overflow packet length values of 128KB or more. I changed the field to 32 bits to fix this. The pktcdvd driver defaulted to its maximum allowed packet length when it detected a 0 in the track info field. I changed this to fail the operation and refuse to access the media. This seems more sane than attempting to access it with a value that almost certainly will not work. Signed-off-by: NPeter Osterlund <petero2@telia.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Markus Lidel 提交于
Fix http://bugzilla.kernel.org/show_bug.cgi?id=5923 When a scsi command failed, an oops would result. Back-to-back SMART queries would make the Seagate drives unhappy. The second SMART query would timeout, and the command would be aborted. Acked-by: NMarkus Lidel <Markus.Lidel@shadowconnect.com> Cc: Kenny Simpson <theonetruekenny@yahoo.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric Dumazet 提交于
percpu_data blindly allocates bootmem memory to store NR_CPUS instances of cpudata, instead of allocating memory only for possible cpus. As a preparation for changing that, we need to convert various 0 -> NR_CPUS loops to use for_each_cpu(). (The above only applies to users of asm-generic/percpu.h. powerpc has gone it alone and is presently only allocating memory for present CPUs, so it's currently corrupting memory). Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: Jens Axboe <axboe@suse.de> Cc: Anton Blanchard <anton@samba.org> Acked-by: NWilliam Irwin <wli@holomorphy.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-