- 25 12月, 2008 10 次提交
-
-
由 Sebastian Ott 提交于
There is the chance that we get condition code 0 for a stsch but the resulting schib is not vaild. In the current code there are 2 cases: * we do a check for validity of the schib after stsch, but at this time we have already stored the invaild schib in the subchannel structure. This may lead to problems. * we don't do a check for validity, which is not that good either. The patch addresses both issues by introducing the stsch wrapper cio_update_schib which performs stsch on a local schib. This schib is only written back to the subchannel if it's valid. side note: For some functions (chp_events) the return codes are different now (-ENXIO vs -ENODEV) but this shouldn't do harm since the caller doesn't check for _specific_ errors. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Check if a ccw device is registered via device_is_registered() and not via the old kludge of checking the membership in driver core internal klists. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Just put the cdev's reference count to give up our reference. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
If we fail the probe for an I/O subchannel, we won't be able to unregister it again since there are no sch_event() callbacks for unbound subchannels. Just succeed the probe in any case and schedule unregistering the subchannel. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
There is a race between io_subchannel_register() and io_subchannel_sch_event() which may cause a subchannel to be unregistered because it is no longer operational before io_subchannel_register() had run. We need to check whether the subchannel is still registered before the ccw device can be registered and just bail out if it is not. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Subchannel refcounting was incorrect in some places, especially a refcount was missing when ccw_device_call_sch_unregister() was called and the refcount was not correctly switched after moving devices. Fix this by establishing the following rules: - The ccw_device obtains a reference on its parent subchannel when dev.parent is set and gives it up in its release function. This is needed because we need a parent reference for correct refcounting even before the ccw device is (if at all) registered. - When calling device_move(), obtain a reference on the new subchannel before moving the ccw device and give up the reference on the old parent after moving. This brings the refcount in line with the first rule. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
The current code attempts to get an extra reference count for online devices by doing a get_device() in ccw_device_online() and a put_device() in ccw_device_done(). However, this - incorrectly obtains an extra reference for disconnected devices becoming available again (since they are already online) - needs special checks for css_init_done in order to handle the console device - is not obvious and - may incorretly drop a reference count in ccw_device_done() if that function is called after path verification for a device that just became not operational. So let's just get the reference in ccw_device_set_online() and drop it in ccw_device_set_offline(). (Unfortunately, we still need the special case in io_subchannel_probe().) Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Due to former patches a comment and device id initialization were split from the addressed function call in io_subchannel_probe. Move it back to where it belongs. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Kay Sievers 提交于
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 15 11月, 2008 1 次提交
-
-
由 Cornelia Huck 提交于
In ccw_device_move_to_orphanage(), a replacing ccw_device is searched via get_{disc,orphaned}_ccwdev_by_dev_id() which obtain a reference on the returned ccw_device. This reference must be given up again after the device has been moved to its new parent. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 11 10月, 2008 5 次提交
-
-
由 Cornelia Huck 提交于
Convert remaining s390 users setting bus_id to dev_set_name() or init_name. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Some further bus_id -> dev_name() conversions in s390 code. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Kay Sievers 提交于
bus_id -> dev_name() conversions in s390 code. [cornelia.huck@de.ibm.com: minor adaptions] Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Peter Oberparleiter 提交于
Allow users to remove blacklisted ccw devices by using the /proc/cio_ignore interface: echo purge > /proc/cio_ignore will remove all devices which are offline and blacklisted. Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Peter Oberparleiter 提交于
Use dedicated slow path work queue when unregistering a device due to a user action. This ensures serialialization of other register/ unregister requests. Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 22 8月, 2008 1 次提交
-
-
由 Peter Oberparleiter 提交于
Calling a ccw driver's notify function without the ccw device lock held opens up a race window between discovery and handling of a change in the device operational state. As a result, the device driver may encounter unexpected device malfunction, leading to out-of-retry situations or similar. Remove race by extending the ccw device lock from state change discovery to the calling of the notify function. Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 14 7月, 2008 8 次提交
-
-
由 Michael Ernst 提交于
Unnecessary dev_info, dev_warn and printk messages are removed. Signed-off-by: NMichael Ernst <mernst@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Cornelia Huck 提交于
css_device_id exists, so use it for determining the right driver (and add a match_flags which is always 1 for valid types). Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Cornelia Huck 提交于
Passing the affected chpid in chp_event() worked only by chance since chpid is the first element in res_acc_data. Make it work properly by generalizing res_acc_data as chp_link and always passing around a properly filled out chp_link structure in chp_event(). Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Cornelia Huck 提交于
Replace the numeric values for I/O interruption subclass usage with abstract definitions and collect them all in asm/isc.h. This gives us a better overview of which iscs are actually used and makes it possible to better spread out isc usage in the future. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Peter Oberparleiter 提交于
Extend the scsw data structure to the format required by fcx. Also provide helper functions for easier access to fields which are present in both the traditional as well as the modified format. Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Cornelia Huck 提交于
Rework the css driver methods to provide sane callbacks for subchannels of all types. As a bonus, this cleans up and simplyfies the machine check handling for I/O subchannels a lot. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Cornelia Huck 提交于
Add modalias and subchannel type attributes for all subchannels. I/O subchannel specific attributes are now created in io_subchannel_probe(). modalias and subchannel type are also added to the uevent for the css bus. Also make the css modalias known. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Cornelia Huck 提交于
Register all valid subchannels, not only I/O subchannels. Move I/O subchannel specific initialization to io_subchannel_probe(). Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
- 07 5月, 2008 1 次提交
-
-
由 Michael Ernst 提交于
The only sporadically used CIO_DEBUG messages are replaced by ordinary CIO_MSG_EVENT messages. The CIO_MSG_EVENT messages debug levels are consolidated. Signed-off-by: NMichael Ernst <mernst@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 30 4月, 2008 1 次提交
-
-
由 Cornelia Huck 提交于
Make parsing of attribute writes handle incorrect input better. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 17 4月, 2008 1 次提交
-
-
由 Heiko Carstens 提交于
Most noteable part of this commit is the new local header file entry.h which contains all the function declarations of functions that get only called from asm code or are arch internal. That way we can avoid extern declarations in C files. This is more or less the same that was done for sparc64. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
- 19 2月, 2008 2 次提交
-
-
由 Cornelia Huck 提交于
We can't do our recovery in softirq context, so we schedule it from our timer function. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 26 1月, 2008 6 次提交
-
-
由 Peter Oberparleiter 提交于
Add a timed recovery procedure to reactivate ccw devices in cases where HW/VM events are not sufficient to allow for proper recovery of reappearing channel paths. Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Set the owner field in the embedded struct device_driver to the value provided in the {css,ccw,ccwgroup}_driver. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Also define helpers sch_{g,s}et_cdev() to make the intention more clear. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Introduce a private pointer in struct subchannel to store per-subchannel type data (cannot use dev->priv since this is already used for something else). Create a new header io_sch.h for I/O subchannel specific structures and instructions. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Add wrapper functions for driver_register and driver_unregister so that css drivers don't need to muck with struct device_driver directly. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Make all callbacks in css_driver take a struct subchannel (and not a struct device). Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 05 11月, 2007 1 次提交
-
-
由 Heiko Carstens 提交于
Use INIT_WORK to initialize struct work and don't initialize a struct work partial by explicitly initializing its private structures. Fixes the following lockdep bug because no key was assigned: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. 0000000001f07bb8 0000000001f07bf8 0000000000000002 0000000000000000 0000000001f07c98 0000000001f07c10 0000000001f07c10 0000000000015406 0000000000000000 0000000000000002 0000000000000000 0000000000000000 0000000001f07bf8 000000000000000c 0000000001f07bf8 0000000001f07c68 000000000039ae60 0000000000015406 0000000001f07bf8 0000000001f07c48 Call Trace: ([<0000000000015376>] show_trace+0xda/0x104) [<0000000000015460>] show_stack+0xc0/0xf8 [<00000000000154c6>] dump_stack+0x2e/0x3c [<000000000006a71e>] __lock_acquire+0x47e/0x11a0 [<000000000006b4f0>] lock_acquire+0xb0/0xd8 [<00000000000555a6>] run_workqueue+0x1aa/0x24c [<00000000000556de>] worker_thread+0x96/0xf4 [<000000000005c210>] kthread+0x90/0xb4 [<000000000001947a>] kernel_thread_starter+0x6/0xc [<0000000000019474>] kernel_thread_starter+0x0/0xc Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 13 10月, 2007 1 次提交
-
-
由 Kay Sievers 提交于
This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 12 10月, 2007 2 次提交
-
-
由 Cornelia Huck 提交于
There was the possibilty that an action like ccw_device_set_offline() triggered by a device gone machine check might trigger a not oper event. Unfortunately, this could lead to the situation that we tried to unregister a subchannel twice: Once from the slow path evaluation, and once via the not oper event. Fix this by always using the same mechanism (css_schedule_eval()) for triggering the unregister. This makes sure that unregistration will only be done once. As an added bonus, it also simplyfies the code. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Don't forget to set dev->groups for early ccw devices like the console device so the default attributes are created. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-