We may disable proc fs only for sound part, to reduce ALSA
memory footprint. So add CONFIG_SND_PROC_FS and replace the
old CONFIG_PROC_FSs in alsa code.

With sound proc fs disabled, we can save about 9KB memory
size on X86_64 platform.
Signed-off-by: NJie Yang <yang.jie@intel.com>
Reviewed-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For some embedded devices, we need reduce code size and data
footprint as much as possible, e.g. disabling procfs, hw/sw
params refinement, mmap, dpcm, dapm, compressed API...

Here add SND_PROC_FS item for expert, we can unselect it to
disable sound proc FS and reduce memory footprint.
Signed-off-by: NJie Yang <yang.jie@intel.com>
Reviewed-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When detecting packet discontinuity, handle_in_packet() returns minus value
and this value is assigned to unsigned int variable, then the variable has
huge value. As a result, the variable causes buffer-over-run in
handle_out_packet(). This brings invalid page request and system hangup.

This commit fixes the bug to add a new argument into handle_in_packet()
and the number of handled data blocks is assignd to it. The function
return value is just used to check error.

I also considered to change the type of local variable to 'int' in
in_stream_callback(). This idea is based on type-conversion in C standard,
while it may cause future problems when adding more works. Thus, I dropped
this idea.

Fixes: 6fc6b9ce('ALSA: firewire-lib: pass the number of data blocks in incoming packets to outgoing packets')
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It should use kernel_read() instead of vfs_read() to load a firmware
binary onto the kernel pages.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Spotted by sparse:
  sound/usb/bcd2000/bcd2000.c:73:1: warning: symbol 'devices_used' was not declared. Should it be static?
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Spotted by sparse:
  sound/pci/lx6464es/lx6464es.c:415:47: warning: Using plain integer as NULL pointer
  sound/pci/lx6464es/lx6464es.c:417:48: warning: Using plain integer as NULL pointer
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

PCI_DEVICE() macro itself defines SSID entries while we override them
after that.  Replace with a more appropriate macro, PCI_DEVICE_SUB()
to define all ID values properly.

Spotted by sparse:
  sound/pci/lx6464es/lx6464es.c:60:11: warning: Initializer entry defined twice
  sound/pci/lx6464es/lx6464es.c:61:12:   also defined here
  sound/pci/lx6464es/lx6464es.c:64:11: warning: Initializer entry defined twice
  sound/pci/lx6464es/lx6464es.c:65:12:   also defined here
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add missing prefix to make some local data static.

Spotted by sparse:
  sound/drivers/dummy.c:159:20: warning: symbol 'model_emu10k1' was not declared. Should it be static?
  sound/drivers/dummy.c:165:20: warning: symbol 'model_rme9652' was not declared. Should it be static?
  ....
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This device is based on DM1000E, and BeBoB version 1 firmware is
installed.

$ cat /proc/asound/cards
 0 [Pro            ]: BeBoB - Mbox 2 Pro
                      DIGIDESIGN Mbox 2 Pro (id:1, rev:1),
		      GUID 00a07e0100a90000 at fw1.0, S400

$ cat /proc/asound/Pro/firewire/firmware
Manufacturer:	bridgeCo
Protocol Ver:	1
Build Ver:		0
GUID:		0x00A07E0100A90000
Model ID:		0x01
Model Rev:		1
Firmware Date:	20071031
Firmware Time:	034402
Firmware ID:	0xA9
Firmware Ver:	16777215
Base Addr:		0x20080000
Max Size:		1572864
Loader Date:	20051207
Loader Time:	205554

With this patch, ALSA BeBoB driver can start packet streaming to/from
this model, while as a default, internal multiplexer of this model is
not initialized and generates no sound even if the driver transfers
any packets with PCM samples. To hear any sounds from this model,
userspace applications should be developed to set parameters to the
internal multiplexer. You can see raw information in FFADO website:
http://subversion.ffado.org/wiki/AvcModels/DigiDesignMboxPro2Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When detecting zero in 'dbs' field of CIP header, this packet streaming
should be aborted because of avoiding division-by-zero. This is an error
in an aspect of IEC 61883-1, thus protocol error.

This commit use EPROTO instead of EIO. Actually, the returned value is
not used for userspace and this commit has no effect.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When detecting invalid value in 'dbs' field of CIP header or packet
discontinuity, current implementation reports the status by err_info().
In most cases this state is caused by model-specific issue due to
vendor's customization and should be reported to developers.

This commit use dev_err() instead of dev_info() for this purpose.
In the cases, packet streaming is aborted, thus no message floading
occurs.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some macros include my misunderstanding for IEC 61883-1 or -6.
Additionally, some fixed values appear on codes.

This commit replaces these with macros with proper names.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The naming rule for local functions was inconsistent. This commit
rename them with a consistent manner.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Former patches allow non-blocking streams to synchronize with timestamp.
This patch removes the restriction.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In previous commit, error handling for incoming packet processing is
outside of packetization. This is nice for reading the codes.

This commit applies this idea for outgoing packet processing, too.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Current implementation reuses the value of syt field in incoming packet to
outgoing packet for full duplex timestamp synchronization, while the number
of data blocks in outgoing packets refers to hard-coded table and the
synchronization cannot be applied to non-blocking stream.

This commit passes the number of data blocks from incoming packet
processing to outgoing packet processing for the synchronization. For
normal mode, isochronous callback handler is changed to generate the values
of syt and data blocks.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This function is called according to conditions between the value of
syt and streaming mode(blocking or non-blocking).

To simplify caller's work, this commit push these conditions to the
function.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In IEC 61883-6, the number of data blocks in a packet is limited up to
the value of SYT_INTERVAL. Current implementation is compliant to the
limitation, while it can cause buffer-over-run when the value of dbs
field in received packet is illegally large.

This commit adds a validator to detect such illegal packets to prevent
the buffer-over-run. Actually, the buffer is aligned to the size of memory
 page, thus this issue hardly causes system errors due to the room to page
alignment, as long as a few packets includes such jumbo payload; i.e.
a packet to several received packets.

Here, Behringer F-Control Audio 202 (based on OXFW 960) has a quirk to
postpone transferring isochronous packet till finish handling any
asynchronous packets. In this case, this model is lazy, transfers no
packets according to several cycle-start packets. After finishing, this
model pushes required data in next isochronous packet. As a result, the
packet include more data blocks than IEC 61883-6 defines.

To continue to support this model, this commit adds a new flag to extend
the length of calculated payload. This flag allows the size of payload
5 times as large as IEC 61883-6 defines. As a result, packets from this
model passed the validator successfully.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a helper to create the IEC958 channel status from an ALSA
snd_pcm_runtime structure, taking account of the sample rate and
sample size.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Reviwed-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a helper for the EDID like data structure, which is typically passed
from a HDMI adapter to its associated audio driver.  This informs the
audio driver of the capabilities of the attached HDMI sink.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The jack interface is statically included in sound core.  Having
doubly module information is rather confusing.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The file is moved to hda core and renamed to hdac_i915.c, so can be used
by both legacy HDA driver and new Skylake audio driver.

- Add snd_hdac_ prefix to the public APIs.
- The i915 audio component is moved to core bus and dynamically allocated.
- A static pointer hdac_acomp is used to help bind/unbind callbacks to get
  this component, because the sound card's private_data is used by the azx
  chip pointer, which is a legacy structure. It could be removed if private
  _data changes to some core structure which can be extended to find the
  bus.
- snd_hdac_get_display_clk() is added to get the display core clock for
  HSW/BDW.
- haswell_set_bclk() is moved to hda_intel.c because it needs to write the
  controller registers EM4/EM5, and only legacy HD-A needs it for HSW/BDW.
- Move definition of HSW/BDW-specific registers EM4/EM5 to hda_register.h
  and rename them to HSW_EM4/HSW_EM5, because other HD-A controllers have
  different layout for the extended mode registers.
Signed-off-by: NMengdong Lin <mengdong.lin@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The CA0132 DSP loader leads to NULL deference since the recent
transition to HDA core code, as it unconditionally accesses
hdac_stream->substream->runtime.  For DSP loading, the substream
shouldn't be assigned.

This patch addresses the NULL dereference above in addition to assure
the substream is cleared while DSP loading.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98151Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modern machines tend to have only one headset jack nowadays, and they
often need these quirks.  Let's allow them applicable via model
option for ease of debugging.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds quirks detection to the Creative CA0132 codec, and the
quirk for Alienware 15 (2015).
Some quirks may need different pin configuration, so the relevant
compile-time configuration has been removed.
The pin configuration and related initialization verbs are generated at
runtime instead, in ca0132_config() and ca0132_prepare_verbs().
Signed-off-by: NGabriele Martino <g.martino@gmx.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

As we now have deferred probing, we can use a custom mechanism and
finally get rid of this legacy interface from the i2c core.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Tested-by: NDan DeVoto <dand1972@yahoo.com>
Tested-by: NMark Elliott <txlitebeer@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

while building with allyesconfig it was giving a build warning about
unused variable. declare the variable only if the driver is built as a
module.
Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch creates hda_intel_trace.h to add some pm trace functions
used in hda_intel.c
Signed-off-by: NLibin Yang <libin.yang@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch does:

1. Rename the hda_intel_trace.h to hda_controller_trace.h as
this trace is used in hda_controller.c

2. Add some trace function for pcm flow.
Signed-off-by: NLibin Yang <libin.yang@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add the trace of snd_hdac_stream_start and snd_hdac_stream_stop.
Signed-off-by: NLibin Yang <libin.yang@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Tegra210 contains a similar codec as Tegra124 and can be supported using
the same patch function.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Tegra114 contains the same codec as Tegra124 and can be supported using
the same patch function.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Tegra30 contains the same codec as Tegra124 and can be supported using
the same patch function.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When probing, provide accurate error messages to help with debugging
failures.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The HDMI codec on NVIDIA Tegra SoCs has a feature that doesn't exist on
the MCP or GPU variants. The highest bit in the vendor-defined scratch
registers can be used to trigger an interrupt in the HDMI codec, which
is signalled to the HDMI driver. This can be used to pass information,
such as the HDA format, to the HDMI driver so that it can reconfigure
itself accordingly.

While at it, change the name of the codec to Tegra124 since there are no
other SoCs in the Tegra12x family. There isn't really a Tegra12x family.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is set for the MCP variants of the NVIDIA HDA controller, which the
Tegra variant was derived from. This fixes the following warning at boot
time:

	[    2.486610] tegra-hda 70030000.hda: CORB reset timeout#1, CORBRP = 0
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Dell create new platform with ALC298 codec.
This patch will enable headset mode for ALC298/ALC3266 platform.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's no longer a part of API but merely a local function.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Just a minor refactoring, no functional changes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit [c560a679: ALSA: core: Remove child proc file elements
recursively] converted snd_card_proc_new() with the normal
snd_info_*() call and removed snd_device chain for such info
entries. However, it misses one point: the creation of the proc entry
was managed by snd_device chain in the former code, and now it's also
gone, which results in no proc files creation at all.  Mea culpa.

This patch makes snd_info_card_register() creating the all pending
child proc entries in a shot.  Also, since snd_card_register() might
be called multiple times, this function is also changed to be callable
multiple times.

Along with the changes above, now the linked list of snd_info_entry is
added at creation time instead of snd_info_register() for keeping eyes
of pending info entries.

Fixes: c560a679 ('ALSA: core: Remove child proc file elements recursively')
Reported-by: N"Lu, Han" <han.lu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>