- 13 3月, 2013 1 次提交
-
-
由 Kumar Gala 提交于
The e6500 core adds support for AltiVec on a Book-E class processor. Connect up all the various exception handling code and build config mechanisms to allow user spaces apps to utilize AltiVec. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 06 3月, 2013 5 次提交
-
-
由 Kumar Gala 提交于
The e6500 core used on T4240 and B4860 SoCs from FSL implements MMUv2 of the Power Book-E Architecture. However there are some minor differences between it and other Book-E implementations. Add support to parse SPRN_TLB1PS for the variable page sizes supported. In the future this should be expanded for more page sizes supported on e6500 as well as other MMU features. This patch is based on code from Scott Wood. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Roy ZANG 提交于
The T4240 utilizes a new PCIe controller block that has some minor programming model differences from previous versions. The major one that impacts initialization is how we determine the link state. On the 3.x controllers we have a memory mapped SoC register instead of a PCI config register that reports the link state. Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com> Signed-off-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Vakul Garg 提交于
Add device tree for SEC (crypto engine) version 5.0 used on T4240. Signed-off-by: NVakul Garg <vakul@freescale.com> Signed-off-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Stuart Yoder 提交于
Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Stuart Yoder 提交于
-also define a binding for fsl,eref-* properties Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 05 3月, 2013 8 次提交
-
-
由 Michael Neuling 提交于
We support DSCR (Data Stream Control Register) so we should make sure we set it in the FSCR (Facility Status & Control Register) incase some firmwares don't set it. If we don't set this, we'll take a facility unavailable exception when using the DSCR. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
This sets the DSCR (Data Stream Control Register) in the FSCR (Facility Status & Control Register). Also harmonise TAR (Target Address Register) FSCR bit definition too. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Currently we only set the FSCR (Facility Status and Control Register) when HV=1 but this feature is available when HV=0 also. This patch sets FSCR when HV=0. Also, we currently only set the FSCR on the master CPU. This patch also sets the FSCR on secondary CPUs. Signed-off-by: NMichael Neuling <mikey@neuling.org> cc: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Tony Breeds 提交于
Since kmp takes 2 unsigned long args there should be a compat wrapper. Since one isn't provided I think it's safer just to hook this up to not implemented. If we need it later we can do it properly then. Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Akinobu Mita 提交于
The BITOP_LE_SWIZZLE macro was used in the little-endian bitops functions for powerpc. But these functions were converted to generic bitops and the BITOP_LE_SWIZZLE is not used anymore. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Currently we use the link register to branch up high in the early MMU on syscall entry path. Unfortunately, this trashes the link stack as the address we are going to is not associated with the earlier mflr. This patch simply converts us to used the count register (volatile over syscalls anyway) instead. This is much better at predicting in this scenario and doesn't trash link stack causing a bunch of additional branch mispredicts later. Benchmarking this on POWER8 saves a bunch of cycles on Anton's null syscall benchmark here: http://ozlabs.org/~anton/junkcode/null_syscall.cSigned-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Chen Gang 提交于
the dest buf len is 80 (HVCS_CLC_LENGTH + 1). the src buf len is PAGE_SIZE. if src buf string len is more than 80, it will cause issue. Signed-off-by: NChen Gang <gang.chen@asianux.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Tony Breeds 提交于
When building with CRYPTO_SHA1_PPC enabled we fail with: powerpc/crypto/sha1-powerpc-asm.S: Assembler messages: powerpc/crypto/sha1-powerpc-asm.S:116: Error: can't resolve `0' {*ABS* section} - `STACKFRAMESIZE' {*UND* section} powerpc/crypto/sha1-powerpc-asm.S:116: Error: expression too complex powerpc/crypto/sha1-powerpc-asm.S:178: Error: unsupported relocation against STACKFRAMESIZE Use INT_FRAME_SIZE instead of STACKFRAMESIZE. Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Tested-by: NChristian Kujau <lists@nerdbynature.de> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 28 2月, 2013 2 次提交
-
-
由 Sasha Levin 提交于
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: NPeter Senna Tschudin <peter.senna@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Rothwell 提交于
Change it to CONFIG_HAVE_VIRT_TO_BUS and set it in all architecures that already provide virt_to_bus(). Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: NJames Hogan <james.hogan@imgtec.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: H Hartley Sweeten <hartleys@visionengravers.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 2月, 2013 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 25 2月, 2013 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 24 2月, 2013 5 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Tang Chen 提交于
Introduce a new API vmemmap_free() to free and remove vmemmap pagetables. Since pagetable implements are different, each architecture has to provide its own version of vmemmap_free(), just like vmemmap_populate(). Note: vmemmap_free() is not implemented for ia64, ppc, s390, and sparc. [mhocko@suse.cz: fix implicit declaration of remove_pagetable] Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: NJianguo Wu <wujianguo@huawei.com> Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NMichal Hocko <mhocko@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yasuaki Ishimatsu 提交于
For removing memmap region of sparse-vmemmap which is allocated bootmem, memmap region of sparse-vmemmap needs to be registered by get_page_bootmem(). So the patch searches pages of virtual mapping and registers the pages by get_page_bootmem(). NOTE: register_page_bootmem_memmap() is not implemented for ia64, ppc, s390, and sparc. So introduce CONFIG_HAVE_BOOTMEM_INFO_NODE and revert register_page_bootmem_info_node() when platform doesn't support it. It's implemented by adding a new Kconfig option named CONFIG_HAVE_BOOTMEM_INFO_NODE, which will be automatically selected by memory-hotplug feature fully supported archs(currently only on x86_64). Since we have 2 config options called MEMORY_HOTPLUG and MEMORY_HOTREMOVE used for memory hot-add and hot-remove separately, and codes in function register_page_bootmem_info_node() are only used for collecting infomation for hot-remove, so reside it under MEMORY_HOTREMOVE. Besides page_isolation.c selected by MEMORY_ISOLATION under MEMORY_HOTPLUG is also such case, move it too. [mhocko@suse.cz: put register_page_bootmem_memmap inside CONFIG_MEMORY_HOTPLUG_SPARSE] [linfeng@cn.fujitsu.com: introduce CONFIG_HAVE_BOOTMEM_INFO_NODE and revert register_page_bootmem_info_node()] [mhocko@suse.cz: remove the arch specific functions without any implementation] [linfeng@cn.fujitsu.com: mm/Kconfig: move auto selects from MEMORY_HOTPLUG to MEMORY_HOTREMOVE as needed] [rientjes@google.com: fix defined but not used warning] Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Reviewed-by: NWu Jianguo <wujianguo@huawei.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NMichal Hocko <mhocko@suse.cz> Signed-off-by: NLin Feng <linfeng@cn.fujitsu.com> Signed-off-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wen Congyang 提交于
For removing memory, we need to remove page tables. But it depends on architecture. So the patch introduce arch_remove_memory() for removing page table. Now it only calls __remove_pages(). Note: __remove_pages() for some archtecuture is not implemented (I don't know how to implement it for s390). Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Phileas Fogg 提交于
Disable hard IRQ before kexec a new kernel image. Not doing it can result in corrupted data in the memory segments reserved for the new kernel. Signed-off-by: NPhileas Fogg <phileas-fogg@mail.ru> CC: <stable@vger.kernel.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 23 2月, 2013 2 次提交
-
-
由 Al Viro 提交于
NOTE: this really needs testing - I could've easily fucked up refcounting in there. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 20 2月, 2013 2 次提交
-
-
由 Harninder Rai 提交于
Signed-off-by: NHarninder Rai <harninder.rai@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Harninder Rai 提交于
BSC9131RDB doesn't have SDHC enabled. As a result of this typo, the node was not getting disabled from the device tree which was leading to linux hang during bootup Signed-off-by: NHarninder Rai <harninder.rai@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 16 2月, 2013 6 次提交
-
-
由 Scott Wood 提交于
The MPIC code will disable coreint if it detects an insufficient MPIC version. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Scott Wood 提交于
This will be used by the qemu-e500 platform, as the MPIC version (and thus whether we have coreint) depends on how QEMU is configured. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Varun Sethi 提交于
The pci controller structure has a provision to store the device structure pointer of the corresponding platform device. Currently this information is not stored during fsl pci controller initialization. This information is required while dealing with iommu groups for pci devices connected to the fsl pci controller. For the case where the pci devices can't be paritioned, they would fall under the same device group as the pci controller. This patch stores the platform device information in the pci controller structure during initialization. Signed-off-by: NVarun Sethi <Varun.Sethi@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Stef van Os 提交于
Initial board support for the Prodrive PPA8548 AMC module. Board is an MPC8548 AMC platform used in RapidIO systems. This module is also used to test/work on mainline linux RapidIO software. PPA8548 overview: - 1.3 GHz Freescale PowerQUICC III MPC8548 processor - 1 GB DDR2 @ 266 MHz - 8 MB NOR flash - Serial RapidIO 1.2 - 1 x 10/100/1000 BASE-T front ethernet - 1 x 1000 BASE-BX ethernet on AMC connector Signed-off-by: NStef van Os <stef.van.os@prodrive.nl> Acked-by: NTimur Tabi <timur@tabi.org> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Timur Tabi 提交于
The Freescale DIU driver was recently updated to not require every DIU platform function, so now we can remove the unneeded functions from some boards. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Julia Lawall 提交于
Delete successive tests to the same location. The code tested the result of a previous call, that itself was already tested. It is changed to test the result of the most recent call. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @s exists@ local idexpression y; expression x,e; @@ *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } ... when != \(y = e\|y += e\|y -= e\|y |= e\|y &= e\|y++\|y--\|&y\) when != \(XT_GETPAGE(...,y)\|WMI_CMD_BUF(...)\) *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 15 2月, 2013 7 次提交
-
-
由 Michael Neuling 提交于
Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Kconfig option for transactional memory on powerpc. Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
This adds the new transactional memory archtected state to the signal context in both 32 and 64 bit. Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
This hooks the new transactional memory code into context switching, FP/VMX/VMX unavailable and exception return. Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
We do lazy FP but not lazy TM (ie. userspace starts with MSR TM=1 FP=0). Hence if userspace does an FP instruction during a transaction, we'll take an fp unavailable exception. This adds functions needed to handle this case. We have to inject the current FP state into the checkpoint so that the hardware can decide what to do with the transaction. We can't inject only the FP so we have to do a full treclaim and recheckpoint to inject just the FP state. This will cause the transaction to be marked as aborted by the hardware. This just add the routines needed to do this for FP, VMX and VSX. It doesn't hook them into the rest of the code yet. Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
These should never happen since we always turn on MSR TM when in userspace. We don't do lazy TM. Hence if we hit this, we barf and kill the task as something's gone horribly wrong. Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-