Intention is to set the NOHZ_BALANCE_KICK flag for the 'ilb_cpu'. Not
for the 'cpu' which is the local cpu. Fix the typo.
Reported-by: NSrivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323199594.1984.18.camel@sbsiddha-desk.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

cpu bit in the nohz.idle_cpu_mask are reset in the first busy tick after
exiting idle. So during nohz_idle_balance(), intention is to double
check if the cpu that is part of the idle_cpu_mask is indeed idle before
going ahead in performing idle balance for that cpu.

Fix the cpu typo in the idle_cpu() check during nohz_idle_balance().
Reported-by: NSrivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323199177.1984.12.camel@sbsiddha-desk.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Now that we initialize jump_labels before sched_init() we can use them
for the debug features without having to worry about a window where
they have the wrong setting.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-vpreo4hal9e0kzqmg5y0io2k@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

The order of parameters is inverted. The index parameter
should come first.
Signed-off-by: NGlauber Costa <glommer@parallels.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1322863119-14225-3-git-send-email-glommer@parallels.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Now that we're  pointing cpuacct's root cgroup to cpustat and accounting
through task_group_account_field(), we should not access cpustat directly.
Since it is done anyway inside the acessor function, we end up accounting
it twice, which is wrong.
Signed-off-by: NGlauber Costa <glommer@parallels.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1322863119-14225-2-git-send-email-glommer@parallels.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Right now, after we collect tick statistics for user and system and store them
in a well known location, we keep the same statistics again for cpuacct.
Since cpuacct is hierarchical, the numbers for the root cgroup should be
absolutely equal to the system-wide numbers.

So it would be better to just use it: this patch changes cpuacct accounting
in a way that the cpustat statistics are kept in a struct kernel_cpustat percpu
array. In the root cgroup case, we just point it to the main array. The rest of
the hierarchy walk can be totally disabled later with a static branch - but I am
not doing it here.
Signed-off-by: NGlauber Costa <glommer@parallels.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Tuner <pjt@google.com>
Link: http://lkml.kernel.org/r/1322498719-2255-4-git-send-email-glommer@parallels.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

hrtick_start_fair() shows up in profiles even when disabled.

v3.0.6

taskset -c 3 pipe-test

   PerfTop:     997 irqs/sec  kernel:89.5%  exact:  0.0% [1000Hz cycles],  (all, CPU: 3)
------------------------------------------------------------------------------------------------

             Virgin                                    Patched
             samples  pcnt function                    samples  pcnt function
             _______ _____ ___________________________ _______ _____ ___________________________

             2880.00 10.2% __schedule                  3136.00 11.3% __schedule
             1634.00  5.8% pipe_read                   1615.00  5.8% pipe_read
             1458.00  5.2% system_call                 1534.00  5.5% system_call
             1382.00  4.9% _raw_spin_lock_irqsave      1412.00  5.1% _raw_spin_lock_irqsave
             1202.00  4.3% pipe_write                  1255.00  4.5% copy_user_generic_string
             1164.00  4.1% copy_user_generic_string    1241.00  4.5% __switch_to
             1097.00  3.9% __switch_to                  929.00  3.3% mutex_lock
              872.00  3.1% mutex_lock                   846.00  3.0% mutex_unlock
              687.00  2.4% mutex_unlock                 804.00  2.9% pipe_write
              682.00  2.4% native_sched_clock           713.00  2.6% native_sched_clock
              643.00  2.3% system_call_after_swapgs     653.00  2.3% _raw_spin_unlock_irqrestore
              617.00  2.2% sched_clock_local            633.00  2.3% fsnotify
              612.00  2.2% fsnotify                     605.00  2.2% sched_clock_local
              596.00  2.1% _raw_spin_unlock_irqrestore  593.00  2.1% system_call_after_swapgs
              542.00  1.9% sysret_check                 559.00  2.0% sysret_check
              467.00  1.7% fget_light                   472.00  1.7% fget_light
              462.00  1.6% finish_task_switch           461.00  1.7% finish_task_switch
              437.00  1.5% vfs_write                    442.00  1.6% vfs_write
              431.00  1.5% do_sync_write                428.00  1.5% do_sync_write
              413.00  1.5% select_task_rq_fair          404.00  1.5% _raw_spin_lock_irq
              386.00  1.4% update_curr                  402.00  1.4% update_curr
              385.00  1.4% rw_verify_area               389.00  1.4% do_sync_read
              377.00  1.3% _raw_spin_lock_irq           378.00  1.4% vfs_read
              369.00  1.3% do_sync_read                 340.00  1.2% pipe_iov_copy_from_user
              360.00  1.3% vfs_read                     316.00  1.1% __wake_up_sync_key
*             342.00  1.2% hrtick_start_fair            313.00  1.1% __wake_up_common
Signed-off-by: NMike Galbraith <efault@gmx.de>
[ fixed !CONFIG_SCHED_HRTICK borkage ]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1321971607.6855.17.camel@marge.simson.netSigned-off-by: NIngo Molnar <mingo@elte.hu>

Commit 69e1e811 ("sched, nohz: Track nr_busy_cpus in the
sched_group_power") messed up the static inline function definition.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/n/tip-abjah8ctq5qrjjtdiabe8lph@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

We already have a pointer to the cgroup parent (whose data is more likely
to be in the cache than this, anyway), so there is no need to have this one
in cpuacct.

This patch makes the underlying cgroup be used instead.
Signed-off-by: NGlauber Costa <glommer@parallels.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Tuner <pjt@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1322498719-2255-3-git-send-email-glommer@parallels.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

This patch changes fields in cpustat from a structure, to an
u64 array. Math gets easier, and the code is more flexible.
Signed-off-by: NGlauber Costa <glommer@parallels.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Tuner <pjt@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1322498719-2255-2-git-send-email-glommer@parallels.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

nr_busy_cpus in the sched_group_power indicates whether the group
is semi idle or not. This helps remove the is_semi_idle_group() and simplify
the find_new_ilb() in the context of finding an optimal cpu that can do
idle load balancing.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20111202010832.656983582@sbsiddha-desk.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

When there are many logical cpu's that enter and exit idle often, members of
the global nohz data structure are getting modified very frequently causing
lot of cache-line contention.

Make the nohz idle load balancing more scalabale by using the sched domain
topology and 'nr_busy_cpu's in the struct sched_group_power.

Idle load balance is kicked on one of the idle cpu's when there is atleast
one idle cpu and:

 - a busy rq having more than one task or

 - a busy rq's scheduler group that share package resources (like HT/MC
   siblings) and has more than one member in that group busy or

 - for the SD_ASYM_PACKING domain, if the lower numbered cpu's in that
   domain are idle compared to the busy ones.

This will help in kicking the idle load balancing request only when
there is a potential imbalance. And once it is mostly balanced, these kicks will
be minimized.

These changes helped improve the workload that is context switch intensive
between number of task pairs by 2x on a 8 socket NHM-EX based system.
Reported-by: NTim Chen <tim.c.chen@intel.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20111202010832.602203411@sbsiddha-desk.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Introduce nr_busy_cpus in the struct sched_group_power [Not in sched_group
because sched groups are duplicated for the SD_OVERLAP scheduler domain]
and for each cpu that enters and exits idle, this parameter will
be updated in each scheduler group of the scheduler domain that this cpu
belongs to.

To avoid the frequent update of this state as the cpu enters
and exits idle, the update of the stat during idle exit is
delayed to the first timer tick that happens after the cpu becomes busy.
This is done using NOHZ_IDLE flag in the struct rq's nohz_flags.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20111202010832.555984323@sbsiddha-desk.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Introduce nohz_flags in the struct rq, which will track these two flags
for now.

NOHZ_TICK_STOPPED keeps track of the tick stopped status that gets set when
the tick is stopped. It will be used to update the nohz idle load balancer data
structures during the first busy tick after the tick is restarted. At this
first busy tick after tickless idle, NOHZ_TICK_STOPPED flag will be reset.
This will minimize the nohz idle load balancer status updates that currently
happen for every tickless exit, making it more scalable when there
are many logical cpu's that enter and exit idle often.

NOHZ_BALANCE_KICK will track the need for nohz idle load balance
on this rq. This will replace the nohz_balance_kick in the rq, which was
not being updated atomically.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20111202010832.499438999@sbsiddha-desk.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

The second call to sched_rt_period() is redundant, because the value of the
rt_runtime was already read and it was protected by the ->rt_runtime_lock.
Signed-off-by: NShan Hai <haishan.bai@gmail.com>
Reviewed-by: NKamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1322535836-13590-2-git-send-email-haishan.bai@gmail.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

For the SD_OVERLAP domain, sched_groups for each CPU's sched_domain are
privately allocated and not shared with any other cpu. So the
sched group allocation should come from the cpu's node for which
SD_OVERLAP sched domain is being setup.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111118230554.164910950@sbsiddha-desk.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

This is another case where we are on our way to schedule(),
so can save a useless clock update and resulting microscopic
vruntime update.
Signed-off-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1321971686.6855.18.camel@marge.simson.netSigned-off-by: NIngo Molnar <mingo@elte.hu>

rt.nr_cpus_allowed is always available, use it to bail from select_task_rq()
when only one cpu can be used, and saves some cycles for pinned tasks.

See the line marked with '*' below:

  # taskset -c 3 pipe-test

   PerfTop:     997 irqs/sec  kernel:89.5%  exact:  0.0% [1000Hz cycles],  (all, CPU: 3)
------------------------------------------------------------------------------------------------

             Virgin                                    Patched
             samples  pcnt function                    samples  pcnt function
             _______ _____ ___________________________ _______ _____ ___________________________

             2880.00 10.2% __schedule                  3136.00 11.3% __schedule
             1634.00  5.8% pipe_read                   1615.00  5.8% pipe_read
             1458.00  5.2% system_call                 1534.00  5.5% system_call
             1382.00  4.9% _raw_spin_lock_irqsave      1412.00  5.1% _raw_spin_lock_irqsave
             1202.00  4.3% pipe_write                  1255.00  4.5% copy_user_generic_string
             1164.00  4.1% copy_user_generic_string    1241.00  4.5% __switch_to
             1097.00  3.9% __switch_to                  929.00  3.3% mutex_lock
              872.00  3.1% mutex_lock                   846.00  3.0% mutex_unlock
              687.00  2.4% mutex_unlock                 804.00  2.9% pipe_write
              682.00  2.4% native_sched_clock           713.00  2.6% native_sched_clock
              643.00  2.3% system_call_after_swapgs     653.00  2.3% _raw_spin_unlock_irqrestore
              617.00  2.2% sched_clock_local            633.00  2.3% fsnotify
              612.00  2.2% fsnotify                     605.00  2.2% sched_clock_local
              596.00  2.1% _raw_spin_unlock_irqrestore  593.00  2.1% system_call_after_swapgs
              542.00  1.9% sysret_check                 559.00  2.0% sysret_check
              467.00  1.7% fget_light                   472.00  1.7% fget_light
              462.00  1.6% finish_task_switch           461.00  1.7% finish_task_switch
              437.00  1.5% vfs_write                    442.00  1.6% vfs_write
              431.00  1.5% do_sync_write                428.00  1.5% do_sync_write
*             413.00  1.5% select_task_rq_fair          404.00  1.5% _raw_spin_lock_irq
              386.00  1.4% update_curr                  402.00  1.4% update_curr
              385.00  1.4% rw_verify_area               389.00  1.4% do_sync_read
              377.00  1.3% _raw_spin_lock_irq           378.00  1.4% vfs_read
              369.00  1.3% do_sync_read                 340.00  1.2% pipe_iov_copy_from_user
              360.00  1.3% vfs_read                     316.00  1.1% __wake_up_sync_key
              342.00  1.2% hrtick_start_fair            313.00  1.1% __wake_up_common
Signed-off-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1321971504.6855.15.camel@marge.simson.netSigned-off-by: NIngo Molnar <mingo@elte.hu>

Instead of going through the scheduler domain hierarchy multiple times
(for giving priority to an idle core over an idle SMT sibling in a busy
core), start with the highest scheduler domain with the SD_SHARE_PKG_RESOURCES
flag and traverse the domain hierarchy down till we find an idle group.

This cleanup also addresses an issue reported by Mike where the recent
changes returned the busy thread even in the presence of an idle SMT
sibling in single socket platforms.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Tested-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1321556904.15339.25.camel@sbsiddha-desk.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

This tracepoint shows how long a task is sleeping in uninterruptible state.

E.g. it may show how long and where a mutex is waited for.
Signed-off-by: NAndrew Vagin <avagin@openvz.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1322471015-107825-8-git-send-email-avagin@openvz.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

There's too many sched*.[ch] files in kernel/, give them their own
directory.

(No code changed, other than Makefile glue added.)
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Since once needs to do something at conferences and fixing compile
warnings doesn't actually require much if any attention I decided
to break up the sched.c #include "*.c" fest.

This further modularizes the scheduler code.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-x0fcd3mnp8f9c99grcpewmhi@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1321117677-3282-1-git-send-email-richard@nod.atSigned-off-by: NIngo Molnar <mingo@elte.hu>

It improves perfomance, especially if autogroup is enabled.

The size of set_task_rq() was 0x180 and now it is 0xa0.
Signed-off-by: NAndrew Vagin <avagin@openvz.org>
Acked-by: NPaul Turner <pjt@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1321020240-3874331-1-git-send-email-avagin@openvz.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

Even though there are no siblings, the list should be
initialized to not contain bogus values.
Signed-off-by: NGlauber Costa <glommer@parallels.com>
Acked-by: NPaul Menage <paul@paulmenage.org>
Acked-by: NPaul Turner <pjt@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1320182360-20043-2-git-send-email-glommer@parallels.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Now that the linkage of jump-labels has been fixed they show a measurable
improvement in overhead for the enabled-but-unused case.

Workload is:

 'taskset -c 0 perf stat --repeat 50 -e instructions,cycles,branches
  bash -c "for ((i=0;i<5;i++)); do $(dirname $0)/pipe-test 20000; done"'

There's a speedup for all situations:

                 instructions            cycles                  branches
 -------------------------------------------------------------------------
 Intel Westmere
 base            806611770               745895590               146765378
 +jumplabel      803090165 (-0.44%)      713381840 (-4.36%)      144561130

 AMD Barcelona
 base            824657415               740055589               148855354
 +jumplabel      821056910 (-0.44%)      737558389 (-0.34%)      146635229
Signed-off-by: NPaul Turner <pjt@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111108042736.560831357@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

In return_cfs_rq_runtime() we want to return bandwidth when there are no
remaining tasks, not "return" when this is the case.
Signed-off-by: NPaul Turner <pjt@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111108042736.623812423@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Avoid select_idle_sibling() from picking a sibling thread if there's
an idle core that shares cache.

This fixes SMT balancing in the increasingly common case where there's
a shared cache core available to balance to.
Tested-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1321350377.1421.55.camel@twinsSigned-off-by: NIngo Molnar <mingo@elte.hu>

In UP systems, the idle task is initialized using the init_task
structure from which the command name is taken (currently "swapper").

In SMP systems, one idle task per CPU is forked by the worker thread
from which the task structure is copied. The command name is, therefore,
"kworker/0:0" or "kworker/0:1", if not updated. Since such update was
lacking, all idle tasks in SMP systems were incorrectly named. This
longtime bug was not discovered immediately, because there is no /proc/0
entry - the bug only becomes apparent when tracing is enabled.

This patch sets the command name of the idle tasks in SMP systems to the
name that is used in the INIT_TASK structure suffixed by a slash and the
number of the CPU.
Signed-off-by: NCarsten Emde <C.Emde@osadl.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111026211708.768925506@osadl.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

Normally the RT bandwidth scheme will share bandwidth across the
entire root_domain. However sometimes its convenient to disable this
sharing for debug purposes. Provide a simple feature switch to this
end.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The return-value convention for these functions varies depending on
whether they're interruptible or can timeout.  It can be a little
confusing--document it.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111006192246.GB28026@fieldses.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NHui Kang <hkang.sunysb@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1318388459-4427-1-git-send-email-hkang.sunysb@gmail.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Every time I have to stare at this function I need to completely
reverse engineer its workings, about time I write a comment
explaining the thing.

Collected bits and pieces from previous changelogs, mostly:

  4be9daaa
  83378269Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1318518057.27731.2.camel@twinsSigned-off-by: NIngo Molnar <mingo@elte.hu>

* 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-sh:
  ARM: mach-shmobile: cpuidle single/global and last_state fixes
  ARM: mach-shmobile: move helper macro PORTCR to sh_pfc.h
  ARM: mach-shmobile: move helper macro PORT_xx to sh_pfc.h
  ARM: mach-shmobile: move helper macro PORT_DATA_xx to sh_pfc.h
  ARM: mach-shmobile: ap4evb: remove white space from end of line
  ARM: mach-shmobile: clock-sh7372: remove un-necessary index
  ARM: mach-shmobile: kota2: add comment out separator
  ARM: mach-shmobile: sh73a0: add MMC data pin pull-up

* 'sh-fixes-for-linus' of git://github.com/pmundt/linux-sh:
  mailmap: Fix up some renesas attributions
  sh: clkfwk: Kill off remaining debugfs cruft.
  drivers: sh: Kill off dead pathname for runtime PM stub.
  drivers: sh: Generalize runtime PM platform stub.
  sh: Wire up process_vm syscalls.
  sh: clkfwk: add clk_rate_mult_range_round()
  serial: sh-sci: Fix up SH-2A SCIF support.
  sh: Fix cached/uncaced address calculation in 29bit mode

* git://github.com/rustyrussell/linux:
  virtio-pci: fix use after free

Commit 31a3ddda introduced
a use after free in virtio-pci. The main issue is
that the release method signals removal of the virtio device,
while remove signals removal of the pci device.

For example, on driver removal or hot-unplug,
virtio_pci_release_dev is called before virtio_pci_remove.
We then might get a crash as virtio_pci_remove tries to use the
device freed by virtio_pci_release_dev.

We allocate/free all resources together with the
pci device, so we can leave the release method empty.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms/combios: fix dynamic allocation of PM clock modes

After commit e978aa7d ("cpuidle: Move dev->last_residency update to
driver enter routine; remove dev->last_state") setting acpi_idle_suspend
to 1 by acpi_processor_suspend() causes the ACPI cpuidle routines to
return error codes continuously, which in turn causes cpuidle to lock up
(hard).

However, acpi_idle_suspend doesn't appear to be useful for any
particular purpose (it's racy and doesn't really provide any real
protection), so it can be removed, which makes the problem go away.
Reported-and-tested-by: NTomas M. <tmezzadra@gmail.com>
Reported-and-tested-by: NFerenc Wagner <wferi@niif.hu>
Tested-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I missed the combios path when I updated the atombios pm code.

Reported by amarsh04 on IRC.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>