- 13 3月, 2009 1 次提交
-
-
由 Holger Schurig 提交于
* removed iomux-mx1-mx2.h completely * distributes the former contents to four different files (iomux-mx1.h, iomux-mx21.h, iomux-mx27.h and the file iomux-mx2x.h, which is common to both i.MX21 and i.MX27). * adds all documented IOMUX definitions for i.MX21 and i.MX27 * fixes a few that were wrong (PD14_AOUT_FEC_CLR, PE16_AF_RTCK). * don't silenly include <linux/io.h> * and fixes all collateral damage from above Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
- 09 1月, 2009 1 次提交
-
-
由 Russell King 提交于
arch/arm/mach-at91/at91cap9.c:337: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91rm9200.c:301: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9260.c:351: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9261.c:287: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9263.c:312: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9rl.c:304: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-h720x/h7202-eval.c:38: error: implicit declaration of function 'IRQ_CHAINED_GPIOB' arch/arm/mach-ks8695/devices.c:46: error: 'KS8695_IRQ_WAN_RX_STATUS' undeclared here (not in a function) arch/arm/mach-msm/devices.c:28: error: 'INT_UART1' undeclared here (not in a function) arch/arm/mach-mx2/devices.c:233: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function) arch/arm/mach-mx3/devices.c:128: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:140: error: 'INT_730_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:165: error: 'INT_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:200: error: 'INT_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap2/board-apollon.c:286: error: implicit declaration of function 'omap_set_gpio_direction' arch/arm/mach-omap2/mcbsp.c:154: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function) arch/arm/mach-omap2/mcbsp.c:181: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function) arch/arm/mach-pxa/e350.c:36: error: 'IRQ_BOARD_START' undeclared here (not in a function) arch/arm/plat-s3c/dev-i2c0.c:32: error: 'IRQ_IIC' undeclared here (not in a function) ... Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 18 12月, 2008 2 次提交
-
-
由 Sascha Hauer 提交于
This patch removes the inclusion of mach/hardware.h from mach/irqs.h and switches to more meaningful names for the irq related macros. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Sascha Hauer 提交于
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
- 16 12月, 2008 4 次提交
-
-
由 Sascha Hauer 提交于
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Sascha Hauer 提交于
This patch adds the platform device and resources for NAND on mx27 boards. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Sascha Hauer 提交于
The pcm038 module (phyCORE-i.MX27) comes with a 512 KiB static RAM which can be battery buffered. Add mtd_ram support and configure the chip select line, to which the sram is attached. Signed-off-by: NLuotao Fu <l.fu@pengutronix.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Sascha Hauer 提交于
mxc_gpio_setup_multiple_pins used to take several ALLOC_MODE flags. Most of them are unused, so simplify the function by removing the flags. Also, instead of using a confusing MXC_GPIO_ALLOC_MODE_RELEASE flag in a function having alloc in its name, add a mxc_gpio_release_multiple_pins function. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
- 14 12月, 2008 2 次提交
-
-
由 Sascha Hauer 提交于
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NEvgeniy Polyakov <zbr@ioremap.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Sascha Hauer 提交于
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NEvgeniy Polyakov <zbr@ioremap.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 09 9月, 2008 1 次提交
-
-
由 Sascha Hauer 提交于
Make SoC devices globally available to boards rather than using a device specific init function. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
- 07 8月, 2008 3 次提交
-
-
由 Russell King 提交于
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
There are 43 includes of asm/mach-types.h by files that don't reference anything from that file. Remove these unnecessary includes. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 05 7月, 2008 9 次提交
-
-
由 Juergen Beisert 提交于
The Phytec phyCORE-i.MX27 CPU module is delivered with the PCM970 baseboard by default. This patch adds support for the hardware. This code is only an empty stub; it is filled up with functionality in a later patch series. Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de>
-
由 Juergen Beisert 提交于
This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de>
-
由 Juergen Beisert 提交于
This patch adds basic support for the Freescale MX27ADS reference board. Currently only a serial console can be used. Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de>
-
由 Juergen Beisert 提交于
Internal clock path handling for the i.MX27 CPU. Changed against the original Freescale code (and against clocklib for example): - clock rate is always calculated whenever one ask for the current rate. (means no "rate" member in the clock structure). So switching the PLL base frequency will propagate immediately to all other clocks that are depending on this frequency. TODO: - Check if the i.MX21 CPU can share the same code. Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de>
-
由 Juergen Beisert 提交于
Add basic i.MX27 CPU support Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de>
-
由 Sascha Hauer 提交于
add support for mx2 in i.MX serial driver Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Juergen Beisert 提交于
This patch adds a few on-chip devices for i.MX21/i.MX27 procesors. Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de>
-
由 Juergen Beisert 提交于
This patch adds basic mach support for the mx2 processor family, based on the original freescale code and adapted to mainline kernel coding style. Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de>
-
由 Juergen Beisert 提交于
This patch adds basic mach support for the mx2 processor family, based on the original freescale code and adapted to mainline kernel coding style. Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de>
-