- 04 12月, 2010 22 次提交
-
-
由 Guillaume LECERF 提交于
The 'param' parameter has never been used since its introduction, so simply remove it. Signed-off-by: NGuillaume LECERF <glecerf@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Dan Carpenter 提交于
It says FB instead of FS (file system). Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Vasiliy Kulikov 提交于
do_verify_xattr_datum(), do_load_xattr_datum(), load_xattr_datum() and verify_xattr_ref() should return negative value on error. Sometimes they return EIO that is positive. Change this to -EIO. Signed-off-by: NVasiliy Kulikov <segoon@openwall.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Joe Perches 提交于
Using %pR standardizes the struct resource output. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Joe Perches 提交于
Using %pR standardizes the struct resource output. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Lars-Peter Clausen 提交于
Now that the mtd core supports more then 64 ecc bytes we can use it instead of some a custom hack in the jz4740 nand driver. This patch removes the custom {read,write}_page handlers from the jz4740 nand driver. Thus the driver will now fallback to the default handlers from the nand core. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Lars-Peter Clausen 提交于
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Jesper Juhl 提交于
The [vk][cmz]alloc(_node) family of functions return void pointers which it's completely unnecessary/pointless to cast to other pointer types since that happens implicitly. This patch removes such casts from drivers/mtd/ Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Viresh Kumar 提交于
Signed-off-by: NViresh Kumar <viresh.kumar@st.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Vasiliy Kulikov 提交于
Structure mtd_info_user is copied to userland with padding byted between "type" and "flags" fields uninitialized. It leads to leaking of contents of kernel stack memory. Signed-off-by: NVasiliy Kulikov <segooon@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Roman Tereshonkov 提交于
Implement cache program feature for 4KiB page onenand. This feature improves the write data performance. The observed 128KiB data program speed change is from 8827KiB/s to 14156 KiB/s when the feature is enabled. Signed-off-by: NRoman Tereshonkov <roman.tereshonkov@nokia.com> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Roman Tereshonkov 提交于
Some fixes are introduced into omap2 code to handle errors when cache program feature is used. Signed-off-by: NRoman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Roman Tereshonkov 提交于
A new option is added for cache program feature. A new variable ongoing is introduced for onenand_chip to handle the multi-command cache program operation. Signed-off-by: NRoman Tereshonkov <roman.tereshonkov@nokia.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Kyungmin Park 提交于
When use the 2KiB pagesize, it should be set the correct page offset. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 srimugunthan 提交于
Signed-off-by: Nsrimugunthan <srimugunthan.dhandapani@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Kevin Cernekee 提交于
Untested, but expected to be compatible with MX25L25635E which I did test. Signed-off-by: NKevin Cernekee <cernekee@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Kevin Cernekee 提交于
This is a 256Mbit (32MiB) part so minor changes were made to support 4-byte addressing. Signed-off-by: NKevin Cernekee <cernekee@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Kevin Cernekee 提交于
Commit b34bc037 removed the "unrecognized JEDEC id" error message, causing the probe function to silently abort if the flash ID is unrecognized. It is desirable to produce diagnostic output in this situation so that the user has some idea what went wrong. Signed-off-by: NKevin Cernekee <cernekee@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Grant Likely 提交于
MTD_OF_PARTS should be possible on all architectures, not just powerpc and microblaze, and it probably should not be a user selectable option. Neither does it need to be in a separate module. Also, rework MTD Kconfig to group options dependant on MTD_PARTITIONS into a if/endif block. Do the same for MTD_REDBOOT_PARTS. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Guillaume LECERF 提交于
Signed-off-by: NGuillaume LECERF <glecerf@gmail.com> Acked-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
- 30 10月, 2010 18 次提交
-
-
git://git.infradead.org/mtd-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/mtd-2.6: (82 commits) mtd: fix build error in m25p80.c mtd: Remove redundant mutex from mtd_blkdevs.c MTD: Fix wrong check register_blkdev return value Revert "mtd: cleanup Kconfig dependencies" mtd: cfi_cmdset_0002: make sector erase command variable mtd: cfi_cmdset_0002: add CFI detection for SST 38VF640x chips mtd: cfi_util: add support for switching SST 39VF640xB chips into QRY mode mtd: cfi_cmdset_0001: use defined value of P_ID_INTEL_PERFORMANCE instead of hardcoded one block2mtd: dubious assignment P4080/mtd: Fix the freescale lbc issue with 36bit mode P4080/eLBC: Make Freescale elbc interrupt common to elbc devices mtd: phram: use KBUILD_MODNAME mtd: OneNAND: S5PC110: Fix double call suspend & resume function mtd: nand: fix MTD_MODE_RAW writes jffs2: use kmemdup mtd: sm_ftl: cosmetic, use bool when possible mtd: r852: remove useless pci powerup/down from suspend/resume routines mtd: blktrans: fix a race vs kthread_stop mtd: blktrans: kill BKL mtd: allow to unload the mtdtrans module if its block devices aren't open ... Fix up trivial whitespace-introduced conflict in drivers/mtd/mtdchar.c
-
由 Linus Torvalds 提交于
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (215 commits) ARM: memblock: setup lowmem mappings using memblock ARM: memblock: move meminfo into find_limits directly ARM: memblock: convert free_highpages() to use memblock ARM: move freeing of highmem pages out of mem_init() ARM: memblock: convert memory detail printing to use memblock ARM: memblock: use memblock to free memory into arm_bootmem_init() ARM: memblock: use memblock when initializing memory allocators ARM: ensure membank array is always sorted ARM: 6466/1: implement flush_icache_all for the rest of the CPUs ARM: 6464/2: fix spinlock recursion in adjust_pte() ARM: fix memblock breakage ARM: 6465/1: Fix data abort accessing proc_info from __lookup_processor_type ARM: 6460/1: ixp2000: fix type of ixp2000_timer_interrupt ARM: 6449/1: Fix for compiler warning of uninitialized variable. ARM: 6445/1: fixup TCM memory types ARM: imx: Add wake functionality to GPIO ARM: mx5: Add gpio-keys to mx51 babbage board ARM: imx: Add gpio-keys to plat-mxc mx31_3ds: Fix spi registration mx31_3ds: Fix the logic for detecting the debug board ...
-
由 Vasiliy Kulikov 提交于
The shmid_ds structure is copied to userland with shm_unused{,2,3} fields unitialized. It leads to leaking of contents of kernel stack memory. Signed-off-by: NVasiliy Kulikov <segooon@gmail.com> Acked-by: NAl Viro <viro@ZenIV.linux.org.uk> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 wu zhangjin 提交于
The definition of PAGE_CACHE_MASK in <linux/pagemap.h> is needed to use MAX_RW_COUNT, and on x86-64 that gets done indirectly through the architecture header includes. But on MIPS and s390 that doesn't happen, and we need to make sure that fs/compat.c includes pagemap.h explicitly. Introduced in commit 435f49a5 ("readv/writev: do the same MAX_RW_COUNT truncation that read/write does"). Reported-by: Sachin Sant <sachinp@in.ibm.com> (S390) Reported-by: wu zhangjin <wuzhangjin@gmail.com> (MIPS) Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andres Salomon 提交于
While building an x86 distro kernel, I hit the following: Kernel: arch/x86/boot/bzImage is ready (#7) ERROR: "of_mtd_parse_partitions" [drivers/mtd/devices/m25p80.ko] undefined! of_mtd_parse_partitions is defined with MTD_OF_PARTS, and that's only built on PPC and microblaze. The code in question should be wrapped w/ a stricter #ifdef. Signed-off-by: NAndres Salomon <dilinger@queued.net> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 David Woodhouse 提交于
In commit 2a48fc0a ('block: autoconvert trivial BKL users to private mutex'), Arnd replaced the BKL usage with a mutex. However, Maxim has already provided a better fix in commit 480792b7 ('mtd: blktrans: kill BKL'), which was simply to remove the BKL without replacing it — since he'd already made it do all necessary locking for itself. Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git由 David Woodhouse 提交于
Conflicts: drivers/mtd/mtd_blkdevs.c Merge Grant's device-tree bits so that we can apply the subsequent fixes. Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Frank Li 提交于
register_blkdev return 1..255 when major = 0. if (ret ) { printk(KERN_WARNING "Unable to register %s block device on major %d: %d\n", tr->name, tr->major, ret); mutex_unlock(&mtd_table_mutex); return ret; } Above code will return fail when register_blkdev return allocated major number. Signed-off-by: NFrank Li <Frank.Li@freescale.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Linus Torvalds 提交于
Merge branches 'x86-fixes-for-linus' and 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, alternative: Call stop_machine_text_poke() on all cpus x86-32: Restore irq stacks NUMA-aware allocations x86, memblock: Fix early_node_mem with big reserved region. * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, uv: More Westmere support on SGI UV x86, uv: Enable Westmere support on SGI UV
-
git://codeaurora.org/quic/kernel/dwalker/linux-msm由 Linus Torvalds 提交于
* 'msm-fixes' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: msm: Kconfig: drop unused config options msm: fix compile failure when no debug uart is selected msm: fix debug-macro.S build failure msm: timer: Decrease shift on timer clocksource arm: mach-msm: fix error handling in msm_iommu_probe() msm: fix Kconfig target board selection msm: fix compile failure on struct membank node member * 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: drivers/video/msm/mddi.c: Remove multiple KERN_<level> uses drivers: msm: video: add dev_set_name call drivers: video: msm: fix hang on disable_irq
-
git://git.fluff.org/bjdooks/linux由 Linus Torvalds 提交于
* 'for-2637/s3c24xx-all' of git://git.fluff.org/bjdooks/linux: ARM: h1940: add UDA1380 to i2c devices list ARM: h1940: Fix backlight and LCD power functions ARM: S3C2440: fix boot failure introduced by recent changes in gpiolib ARM: S3C2440: various fixes in Kconfig file ARM: rx1950: Add UDA1380 to i2c devices list ARM: rx1950: Add LEDs support ARM: rx1950: Add battery device ARM: h1940: Implement mmc_power function ARM: h1940: Use gpiolib for latch access
-
由 Ben Dooks 提交于
-
由 Ben Dooks 提交于
-
由 Ben Dooks 提交于
-
由 Vasily Khoruzhick 提交于
Register UDA1380 codec during H1940 machine init Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Vasily Khoruzhick 提交于
Current implementation of LCD and backlight power control functions is not complete, as result PDA consumes power in suspend. Fix this issue by managing state of some latch bits, just like WinMobile does. Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Jason Baron 提交于
Currently, text_poke_smp() passes a NULL as the third argument to __stop_machine(), which will only run stop_machine_text_poke() on 1 cpu. Change NULL -> cpu_online_mask, as stop_machine_text_poke() is intended to be run on all cpus. I actually didn't notice any problems with stop_machine_text_poke() only being called on 1 cpu, but found this via code inspection. Signed-off-by: NJason Baron <jbaron@redhat.com> LKML-Reference: <20101028152026.GB2875@redhat.com> Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Abdoulaye Walsimou Gaye 提交于
Recent changes in s3c gpio break mini2440 board and may be others. The problem is that mach-mini2440.c: mini2440_init() (where we call s3c_gpio_setpull()) is called before s3c2440.c: s3c2440_init() (where we initialize s3c24xx_gpiocfg_default.set_pull function pointer). This causes dereferencing of NULL pointer at boot time and a kernel panic. Signed-off-by: NAbdoulaye Walsimou Gaye <awg@embtoolkit.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-