Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 18 8月, 2011 2 次提交
    • S
      perf evlist: Fix missing event name init for default event · cc2d86b0
      由 Stephane Eranian 提交于 
      When no event is given to perf record, perf top, a default event is
initialized (cycles). However, perf_evlist__add_default() was not
setting the symbolic name for the event. Perf top worked simply because
it was reconstructing the name from the event code. But it should not
have to do this. This patch initializes the evsel->name field properly.

This second version improves the code flow on the non error path.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20110607161936.GA8163@quadSigned-off-by: NStephane Eranian <eranian@google.com>
[committer note: Use perf_evsel__delete() instead of plain free()]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      cc2d86b0
    • S
      perf list: Fix exit value · 77e57297
      由 Stephane Eranian 提交于 
      This patch fixes an issue with the exit value of perf list:

$ perf list; echo $?
129

perf list returns an error exit code even though there is no error.

There was a stray exit(129) in print_events(). This patch removes this
exit().

$ perf list; echo $?
0

$ perf list hw sw
  cpu-cycles OR cycles                               [Hardware event]
  stalled-cycles-frontend OR idle-cycles-frontend    [Hardware event]
  stalled-cycles-backend OR idle-cycles-backend      [Hardware event]
  instructions                                       [Hardware event]
  cache-references                                   [Hardware event]
  cache-misses                                       [Hardware event]
  branch-instructions OR branches                    [Hardware event]
  branch-misses                                      [Hardware event]
  bus-cycles                                         [Hardware event]

  cpu-clock                                          [Software event]
  task-clock                                         [Software event]
  page-faults OR faults                              [Software event]
  minor-faults                                       [Software event]
  major-faults                                       [Software event]
  context-switches OR cs                             [Software event]
  cpu-migrations OR migrations                       [Software event]
  alignment-faults                                   [Software event]
  emulation-faults                                   [Software event]
$ echo $?
0

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20110523123917.GA31060@quadSigned-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      77e57297
  3. 12 8月, 2011 10 次提交
    • M
      perf probe: Filter out redundant inline-instances · 3f4460a2
      由 Masami Hiramatsu 提交于 
      With gcc4.6, some instances of concrete inlined function looks redundant
and broken, because it appears inside of a concrete instance and its
call_file and call_line are same as the original abstruct's decl_file
and decl_line respectively.

e.g.
 [  d1aa]    subprogram
             external             (flag) Yes
             name                 (strp) "add_timer"
             decl_file            (data1) 2		;here is original
             decl_line            (data2) 847		;line and file
             prototyped           (flag) Yes
             inline               (data1) inlined (1)
             sibling              (ref4) [  d1c6]
...
 [ 11d84]    subprogram
             abstract_origin      (ref4) [  d1aa]	; concrete instance
             low_pc               (addr) .text+0x000000000000246f <add_timer>
             high_pc              (addr) .text+0x000000000000248b <mod_timer_pending>
             frame_base           (block1)               [   0] call_frame_cfa
             sibling              (ref4) [ 11dd9]
 [ 11d9f]      formal_parameter
               abstract_origin      (ref4) [  d1b9]
               location             (data4) location list [  701b]
 [ 11da8]      inlined_subroutine
               abstract_origin      (ref4) [  d1aa]	; redundant instance
               low_pc               (addr) .text+0x000000000000247e <add_timer+0xf>
               high_pc              (addr) .text+0x0000000000002480 <add_timer+0x11>
               call_file            (data1) 2		; call line and file
               call_line            (data2) 847		; are same as above

Those redundant instances leads unwilling results;

e.g. find probe points inside of functions even if we specify
a function entry as below;

$ perf probe -V add_timer
Available variables at add_timer
        @<add_timer+0>
                struct timer_list*      timer
        @<add_timer+15>
                (No matched variables)

So, this filters out those redundant instances based on call-site and
decl-site information.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20110811110317.19900.59525.stgit@fedora15Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      3f4460a2
    • M
      perf probe: Search concrete out-of-line instances · db0d2c64
      由 Masami Hiramatsu 提交于 
      gcc 4.6 generates a concrete out-of-line instance when there is a
function which is implicitly inlined somewhere but also has its own
instance. The concrete out-of-line instance means that it has an
abstract origin of the function which is referred by not only
inlined-subroutines but also a concrete subprogram.

Since current dwarf_func_inline_instances() can find only instances of
inlined-subroutines, this introduces new die_walk_instances() to find
both of subprogram and inlined-subroutines.

e.g. without this,
Available variables at sched_group_rt_period
        @<cpu_rt_period_read_uint+9>
                struct task_group*      tg

perf probe failed to find actual subprogram instance of
sched_group_rt_period().

With this,

Available variables at sched_group_rt_period
        @<cpu_rt_period_read_uint+9>
                struct task_group*      tg
        @<sched_group_rt_period+0>
                struct task_group*      tg

Now it found the sched_group_rt_period() itself.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20110811110311.19900.63997.stgit@fedora15Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      db0d2c64
    • M
      perf probe: Avoid searching variables in intermediate scopes · f182e3e1
      由 Masami Hiramatsu 提交于 
      Fix variable searching logic to search one in inner than local scope or
global(CU) scope. In the other words, skip searching in intermediate
scopes.

e.g., in the following code,

int var1;

void inline infunc(int i)
{
    i++;   <--- [A]
}

void func(void)
{
   int var1, var2;
   infunc(var2);
}

At [A], "var1" should point the global variable "var1", however, if user
mis-typed as "var2", variable search should be failed. However, current
logic searches variable infunc() scope, global scope, and then func()
scope. Thus, it can find "var2" variable in func() scope. This may not
be what user expects.

So, it would better not search outer scopes except outermost (compile
unit) scope which contains only global variables, when it failed to find
given variable in local scope.

E.g.

Without this:
$ perf probe -V pre_schedule --externs > without.vars

With this:
$ perf probe -V pre_schedule --externs > with.vars

Check the diff:
$ diff without.vars with.vars
88d87
<               int     cpu
133d131
<               long unsigned int*      switch_count

These vars are actually in the scope of schedule(), the caller of
pre_schedule().

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20110811110305.19900.94374.stgit@fedora15Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f182e3e1
    • M
      perf probe: Fix to search local variables in appropriate scope · 221d0611
      由 Masami Hiramatsu 提交于 
      Fix perf probe to search local variables in appropriate local inlined
function scope. For example, pre_schedule() has only 2 local variables,
as below;

$ perf probe -L pre_schedule
<pre_schedule@/home/mhiramat/ksrc/linux-2.6/kernel/sched.c:0>
      0  static inline void pre_schedule(struct rq *rq, struct task_struct *prev)
         {
      2         if (prev->sched_class->pre_schedule)
      3                 prev->sched_class->pre_schedule(rq, prev);
         }

However, current perf probe shows 4 local variables on pre_schedule(),
because it searches variables in the caller(schedule()) scope.

$ perf probe -V pre_schedule
Available variables at pre_schedule
        @<schedule+445>
                int     cpu
                long unsigned int*      switch_count
                struct rq*      rq
                struct task_struct*     prev

This patch fixes this issue by searching variables in the local scope of
the instance of inlined function. Here is the result.

$ perf probe -V pre_schedule
Available variables at pre_schedule
        @<schedule+445>
                struct rq*      rq
                struct task_struct*     prev

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20110811110259.19900.85664.stgit@fedora15Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      221d0611
    • M
      perf probe: Warn when more than one line are given · 13e27d76
      由 Masami Hiramatsu 提交于 
      Check multiple --lines option and print warning informing that only the
first specified --line option is valid.

Changes from the 1st post:

- Accept only the first option instead of the last.
- Fix warning message according to David's comment.
- Mark as a bugfix.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20110811110253.19900.96192.stgit@fedora15Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      13e27d76
    • M
      perf probe: Fix to walk all inline instances · 36c0c588
      由 Masami Hiramatsu 提交于 
      Fix line-range collector to walk all instances of inlined function,
because some execution paths can be optimized out depending on the
function argument of instances.

E.g.)
inline_func (arg) {
	if (arg)
		do_something;
	else
		do_another;
}

func_A() {
	inline_func(1)
}

func_B() {
	inline_func(0)
}

In this case, func_A may have only do_something code and func_B may have
only do_another.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20110811110247.19900.93702.stgit@fedora15Signed-off-by: NMasami Hiramatsu <masami.hiramatsu@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      36c0c588
    • M
      perf probe: Fix to search nested inlined functions in CU · b0e9cb28
      由 Masami Hiramatsu 提交于 
      Fix perf probe to walk through the lines of all nested inlined function
call sites and declared lines when a whole CU is passed to the line
walker.

The die_walk_lines() can have two different type of DIEs, subprogram (or
inlined-subroutine) DIE and CU DIE.

If a caller passes a subprogram DIE, this means that the walker walk on
lines of given subprogram. In this case, it just needs to search on
direct children of DIE tree for finding call-site information of inlined
function which directly called from given subprogram.

On the other hand, if a caller passes a CU DIE to the walker, this means
that the walker have to walk on all lines in the source files included
in given CU DIE. In this case, it has to search whole DIE trees of all
subprograms to find the call-site information of all nested inlined
functions.

Without this patch:

$ perf probe --line kernel/cpu.c:151-157
</home/mhiramat/ksrc/linux-2.6/kernel/cpu.c:151>

         static int cpu_notify(unsigned long val, void *v)
         {
    154         return __cpu_notify(val, v, -1, NULL);
         }

With this:
$ perf probe --line kernel/cpu.c:151-157
</home/mhiramat/ksrc/linux-2.6/kernel/cpu.c:151>

    152  static int cpu_notify(unsigned long val, void *v)
         {
    154         return __cpu_notify(val, v, -1, NULL);
         }

As you can see, --line option with source line range shows the declared
lines as probe-able.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20110811110241.19900.34994.stgit@fedora15Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      b0e9cb28
    • M
      perf probe: Fix line walker to check CU correctly · a128405c
      由 Masami Hiramatsu 提交于 
      Fix line walker to check whether a given DIE is CU or not.

Actually this function accepts CU, subprogram and inlined_subroutine
DIEs.

Without this fix, perf probe always fails to analyze lines on inlined
functions;

$ perf probe -L pre_schedule
Debuginfo analysis failed. (-2)
  Error: Failed to show lines. (-2)

This fixes that bug, as below.

$ perf probe -L pre_schedule
<pre_schedule@/home/mhiramat/ksrc/linux-2.6/kernel/sched.c:0>
      0  static inline void pre_schedule(struct rq *rq, struct task_struct *prev
         {
      2         if (prev->sched_class->pre_schedule)
      3                 prev->sched_class->pre_schedule(rq, prev);
         }

         /* rq->lock is NOT held, but preemption is disabled */

Changes from v1:
 - Update against current tip tree.(Fix dwarf-aux.c)

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20110811110235.19900.20614.stgit@fedora15Signed-off-by: NMasami Hiramatsu <masami.hiramatsu@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a128405c
    • M
      perf probe: Fix a memory leak for scopes array · 8afa2a70
      由 Masami Hiramatsu 提交于 
      Fix a memory leak for scopes array when it finds a variable in the
global scope.
Reviewed-by: NPekka Enberg <penberg@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20110811110229.19900.63019.stgit@fedora15Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      8afa2a70
    • V
      perf: fix temporary file ownership check · e9b52ef2
      由 Vasiliy Kulikov 提交于 
      A file in /tmp/ might be a symlink, so lstat() should be used instead of
stat().
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20110811205537.GA22864@albatrosSigned-off-by: NVasiliy Kulikov <segoon@openwall.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      e9b52ef2
  5. 11 8月, 2011 1 次提交
    • J
      perf report: Use properly build_id kernel binaries · f57b05ed
      由 Jiri Olsa 提交于 
      If we bring the recorded perf data together with kernel binary from another
machine using:

	on server A:
	perf archive

	on server B:
	tar xjvf perf.data.tar.bz2 -C ~/.debug

the build_id kernel dso is not properly recognized during the "perf report"
command on server B.

The reason is, that build_id dsos are added during the session initialization,
while the kernel maps are created during the sample event processing.

The machine__create_kernel_maps functions ends up creating new dso object for
kernel, but it does not check if we already have one added by build_id
processing.

Also the build_id reading ABI quirk added in commit:

 - commit b2511481
   perf build-id: Add quirk to deal with perf.data file format breakage

populates the "struct build_id_event::pid" with 0, which
is later interpreted as DEFAULT_GUEST_KERNEL_ID.

This is not always correct, so it's better to guess the pid
value based on the "struct build_id_event::header::misc" value.

- Tested with data generated on x86 kernel version v2.6.34
  and reported back on x86_64 current kernel.
- Not tested for guest kernel case.

Note the problem stays for PERF_RECORD_MMAP events recorded by perf that
does not use proper pid (HOST_KERNEL_ID/DEFAULT_GUEST_KERNEL_ID). They are
misinterpreted within the current perf code. Probably there's not much we
can do about that.

Cc: Avi Kivity <avi@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Link: http://lkml.kernel.org/r/20110601194346.GB1934@jolsa.brq.redhat.comSigned-off-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f57b05ed
  7. 10 8月, 2011 4 次提交
  9. 09 8月, 2011 1 次提交
  11. 08 8月, 2011 5 次提交
  13. 03 8月, 2011 2 次提交
  15. 30 7月, 2011 15 次提交